Selectivity in heavy metal- binding to peptides and proteins

The metal-binding affinities and three-dimensional structures of three synthetic 18-residue peptides with sequences derived from that of the highly conserved metal-binding motif MXCXXC found in many heavy metal-binding proteins were determined. A change in register of the cysteines and alanines of the sequence from the periplasmic mercury-binding protein, MerP, i.e., CAAC, CACA, and CCAA, affects the specificity of metal binding, in particular, the peptide with vicinal cysteines binds only mercury. The three-dimensional structures of the mercury-bound forms of the three peptides determined in solution by NMR spectroscopy peptides differ considerably, even though they are all linear bicoordinate complexes. The three-dimensional structure of the peptide with CAAC bound to Cd(II) demonstrates that the metal-binding loop is malleable enough to accommodate modes of coordination other than linear bicoordinate.     

Analysis of peptides and proteins in their binding to GroEL

The GroEL–GroES is an essential molecular chaperon system that assists protein folding in cell. Binding of various substrate proteins to GroEL is one of the key aspects in GroEL‐assisted protein folding. Small peptides may mimic segments of the substrate proteins in contact with GroEL and allow detailed structural analysis of the interactions. A model peptide SBP has been shown to bind to a region in GroEL that is important for binding of substrate proteins. Here, we investigated whether the observed GroEL–SBP interaction represented those of GroEL–substrate proteins, and whether SBP was able to mimic various aspects of substrate proteins in GroE‐assisted protein folding cycle. We found that SBP competed with substrate proteins, including α‐lactalbumin, rhodanese, and malate dehydrogenase, in binding to GroEL. SBP stimulated GroEL ATP hydrolysis rate in a manner similar to that of α‐lactalbumin. SBP did not prevent GroES from binding to GroEL, and GroES association reduced the ATPase rates of GroEL/SBP and GroEL/α‐lactalbumin to a comparable extent. Binding of both SBP and α‐lactalbumin to apo GroEL was dominated by hydrophobic interaction. Interestingly, association of α‐lactalbumin to GroEL/GroES was thermodynamically distinct from that to GroEL with reduced affinity and decreased contribution from hydrophobic interaction. However, SBP did not display such differential binding behaviors to apo GroEL and GroEL/GroES, likely due to the lack of a contiguous polypeptide chain that links all of the bound peptide fragments. Nevertheless, studies using peptides provide valuable information on the nature of GroEL–substrate protein interaction, which is central to understand the mechanism of GroEL‐assisted protein folding. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Efficient docking of peptides to proteins without prior knowledge of the binding site

Reliability in docking of ligand molecules to proteins or other targets is an important challenge for molecular modeling. Applications of the docking technique include not only prediction of the binding mode of novel drugs, but also other problems like the study of protein-protein interactions. Here we present a study on the reliability of the results obtained with the popular AutoDock program. We have performed systematical studies to test the ability of AutoDock to reproduce eight different protein/ligand complexes for which the structure was known, without prior knowledge of the binding site. More specifically, we look at factors influencing the accuracy of the final structure, such as the number of torsional degrees of freedom in the ligand. We conclude that the Autodock program package is able to select the correct complexes based on the energy without prior knowledge of the binding site. We named this application blind docking, as the docking algorithm is not able to "see" the binding site but can still find it. The success of blind docking represents an important finding in the era of structural genomics.     

Structural and energetic parameters of Ca2+ binding to peptides and proteins

The characteristics of Ca²⁺-binding sites and of the structural reorganization induced by Ca²⁺-binding in storage proteins and ion carriers are being studied as models for molecular mechanisms in Ca²⁺ channels and in Ca²⁺-dependent modulatory proteins. A first step in the study was the development of energy parameters for Ca²⁺ compatible with those in the CHARMM package of computer simulation software. Such parameters were obtained from an analytical fit to the potential surface for [(Ca)(OCH₂)₄]²⁺ calculated with an ab initio molecular orbital method. The resulting parametrization was tested for the hexapeptide cyclo-(Pro-Gly)₃, and a 75 residue long calcium binding protein from bovine intestine (ICaBP). The geometrical parameters calculated for the hexapeptide and its 2:1 complex with Ca²⁺ were in good agreement with experimental data from crystallography and nmr. Similarly, the structure of ICaBP optimized with CHARMM using the new Ca²⁺ parameters showed good agreement with the x-ray structure both in the local structures of the calcium-binding sites and in the overall shape of the protein.     

Structures of designed armadillo repeat proteins binding to peptides fused to globular domains

Designed armadillo repeat proteins (dArmRP) are α‐helical solenoid repeat proteins with an extended peptide binding groove that were engineered to develop a generic modular technology for peptide recognition. In this context, the term “peptide” not only denotes a short unstructured chain of amino acids, but also an unstructured region of a protein, as they occur in termini, loops, or linkers between folded domains. Here we report two crystal structures of dArmRPs, in complex with peptides fused either to the N‐terminus of Green Fluorescent Protein or to the C‐terminus of a phage lambda protein D. These structures demonstrate that dArmRPs bind unfolded peptides in the intended conformation also when they constitute unstructured parts of folded proteins, which greatly expands possible applications of the dArmRP technology. Nonetheless, the structures do not fully reflect the binding behavior in solution, that is, some binding sites remain unoccupied in the crystal and even unexpected peptide residues appear to be bound. We show how these differences can be explained by restrictions of the crystal lattice or the composition of the crystallization solution. This illustrates that crystal structures have to be interpreted with caution when protein–peptide interactions are characterized, and should always be correlated with measurements in solution.     

Agarose-DTNB column for binding sulfhydryl-containing proteins and peptides.

The counting rate of [1-¹⁴C]trichloroacetic acid (TCA) was not stable in a standard toluene/Triton X-100 liquid scintillation solution because this compound becomes partially degraded to ¹⁴CO₂ and CHCl₃. Both toluene and Triton were contributing factors in causing this degradation. The NCS solubilizer added to the toluene/Triton scintillation solution trapped ¹⁴CO₂ and stabilized counting rates of [1-¹⁴C]TCA. When [2-¹⁴C]TCA was used, ¹⁴CHCl₃ remained in the scintillation solution resulting in stable counting rates without the addition of NCS.     

Prediction of the binding energy for small molecules,peptides and proteins

A fast and reliable evaluation of the binding energy from a single conformation of a molecular complex is an important practical task. Knowledge‐based scoring schemes may not be sufficiently general and transferable, while molecular dynamics or Monte Carlo calculations with explicit solvent are too computationally expensive for many applications. Recently, several empirical schemes using finite difference Poisson–Boltzmann electrostatics to predict energies for particular types of complexes were proposed. Here, an improved empirical binding energy function has been derived and validated on three different types of complexes: protein–small ligand, protein–peptide and protein–protein. The function uses the boundary element algorithm to evaluate the electrostatic solvation energy. We show that a single set of parameters can predict the relative binding energies of the heterogeneous validation set of complexes with 2.5 kcal/mol accuracy. We also demonstrate that global optimization of the ligand and of the flexible side‐chains of the receptor improves the accuracy of the evaluation. Copyright © 1999 John Wiley & Sons, Ltd.     

Newly designed modifier prolongs the action of short-lived peptides and proteins by allowing their binding to serum albumin

We found that human serum albumin (HSA) contains a single binding domain for derivatives of long-chain fatty acid (LCFA)-like molecules in which the carboxylate is replaced by sulfonate. Accordingly, we have synthesized 16-sulfo-hexadecanoic acid-N-hydroxysuccinimide ester [HO(3)S-(CH(2))(15)-CONHS], an agent that reacts selectively with the amino side chains of peptides and proteins. A macromolecule containing a single 16-sulfohexadecanoate moiety associating with albumin with a K(a) value of 0.83 ± 0.08 × 10(6) M(-1), a sufficient affinity to extend the actions in vivo of such short-lived peptides and proteins. Subcutaneous administration of insulin-NHCO-(CH(2))(15)-SO(3)(-) into mice facilitated a glucose-lowering effect 4.3 times in duration and 6.6 times in area under the curve (AUC) as compared to an in vitro equipotent amount of Zn(2+)-free insulin. Similarly, subcutaneous and intravenous administration of exendin-4-NHCO-(CH(2))(15)-SO(3)(-) to mice yielded prolonged and stable reduction in glucose level, 5-9-fold longer than that of exendin-4. Also, a single subcutaneous administration of human interferon-α2-[NH-CO-(CH(2))(15)-SO(3)(-)](3) to mice yielded circulating antiviral activity over a period of 40 h. In conclusion, a simple, hydrophilic reagent has been engineered, synthesized, and studied. Its linkage to peptides and proteins in a monomodified fashion yielded hydrophilic, prolonged acting derivatives, due to their acquired ability to associate with serum albumin after administration.     

Alternative binding modes of proline-rich peptides binding to the GYF domain

Recognition of proline-rich sequences plays an important role for the assembly of multiprotein complexes during the course of eukaryotic signal transduction and is mediated by a set of protein folds that share characteristic features. The GYF (glycine-tyrosine-phenylalanine) domain is known as a member of the superfamily of recognition domains for proline-rich sequences. Recent studies on the complexation of the CD2BP2-GYF domain with CD2 peptides showed that the peptide adopts an extended conformation and forms a polyproline type-II helix involving residues Pro4-Pro7 [Freund et al. (2002) EMBO J. 21, 5985-5995]. R/K/GxxPPGxR/K is the key signature for the peptides that bind to the GYF domain [Kofler et al. (2004) J. Biol. Chem. 279, 28292-28297]. In our combined theoretical and experimental study, we show that the peptides adopt a polyproline II helical conformation in the unbound form as well as in the complex. From molecular dynamics simulations, we identify a novel binding mode for the G8W mutant and the wild-type peptide (shifted by one proline in register). In contrast, the conformation of the peptide mutant H9M remains close to the experimentally derived wild-type GYF-peptide complex. Possible functional implications of this altered conformation of the bound ligand are discussed in the light of our experimental and theoretical results.     

Thermodynamic parameters of the binding of retinol to binding proteins and to membranes

Retinol (vitamin A alcohol) is a hydrophobic compound and distributes in vivo mainly between binding proteins and cellular membranes. To better clarify the nature of the interactions of retinol with these phases which have a high affinity for it, the thermodynamic parameters of these interactions were studied. The temperature-dependence profiles of the binding of retinol to bovine retinol binding protein, bovine serum albumin, unilamellar vesicles of dioleoylphosphatidylcholine, and plasma membranes from rat liver were determined. It was found that binding of retinol to retinol binding protein is characterized by a large increase in entropy (T delta S degrees = +10.32 kcal/mol) and no change in enthalpy. Binding to albumin is driven by enthalpy (delta H degrees = -8.34 kcal/mol) and is accompanied by a decrease in entropy (T delta S degrees = -2.88 kcal/mol). Partitioning of retinal into unilamellar vesicles and into plasma membranes is stabilized both by enthalpic (delta H degrees was -3.3 and -5.5 kcal/mol, respectively) and by entropic (T delta S degrees was +4.44 and +2.91 kcal/mol, respectively) components. The implications of these finding are discussed.     

Site selectivity in the binding of inorganic anions to serum transferrin

Equilibrium constants for the sequential binding of two anions at the specific metal-binding sites of apotransferrin have been measured by difference ultraviolet spectroscopy in 0.1 M N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (Hepes) at pH 7.4 and 25 degrees C. Log K1 values for phosphate, phosphite, sulfate, and arsenate fall in the narrow range of 3.5-4.0, while the log K1 for bicarbonate is 2.73. No binding is observed for nitrate, perchlorate, or borate. A dinegative charge appears to be the most important criterion for anion binding. Equilibrium constants have also been measured for binding of anions to both forms of mono(ferric)transferrin. There appears to be a very small site selectivity (0.2 to 0.4 log units) for phosphate, arsenate, and phosphite that favors binding to the N-terminal site, but there is no detectable selectivity for binding of sulfate or bicarbonate. Comparison of the binding affinities and anion selectivity with literature data on anion-binding to protonated macrocyles and cryptates strongly supports the existence of specific anion-binding sites on the protein. Binding constants were also measured in 0.01 M Hepes. The anionic sulfonate group of the buffer appears to have a small effect on anion binding.     

An improved protocol for coupling synthetic peptides to carrier proteins for antibody production using DMF to solubilize peptides.

We present an improved protocol for coupling synthetic peptides to carrier proteins. In this protocol, dimethyl-formamide is used as the solvent to solubilize peptides instead of phosphate-buffered saline (PBS) or 6 M guanidine-HCl/0.01 M phosphate buffer (pH 7). Additionally, the last desalting or dialyzing step to remove uncoupled peptides as in the traditional method is eliminated. Finally, 3 ml of 0.1 M ammonium bicarbonate is added to the carrier protein conjugated peptide solution to help the lyophilization process. Coupling of Cys-containing synthetic peptides to keyhole limpet hemocyanin or bovine serum albumin using m-maleimidobenzoyl-N-hydroxysuccinimide ester are used as the test cases. This method produces high-quality antipeptide antibodies. Also, compared to the traditional method, this procedure is simpler and useful for peptides with solubility problems in PBS or 6 M guanidine-HCl.     

Development and assessment of radioreceptor binding assays for the detection of saxitoxin binding proteins in biological extracts

Several radioreceptor assays using tritiated saxitoxin ([(3)H]STX) were developed to identify a suitable primary screening method for the detection and characterization of soluble saxitoxin binding proteins from biological extracts. Assays using anion and cation exchange, protein binding, and traditional charcoal radioreceptor methods were compared with two previously reported formats. A protein binding assay incorporating filters of mixed cellulose esters (MCE) outperformed all other assay strategies with maximal signal, low background, exceptional reproducibility, minimal matrix effects, and high throughput. Binding site titrations verified that an increase in total protein in the assay led to a concomitant linear increase in the amount of specifically bound [(3)H]STX within the range of 1-90microg total protein. Saturation binding experiments demonstrated that the binding sites were saturable and that nonspecific binding was linear. The MCE assay was unaffected by 600mM NaCl and 500mM KCl. Likewise, minimal variation of specific binding was observed between pH 5 and pH 9, but inhibition was observed below pH 5.     

LINC complexes form by binding of three KASH peptides to domain interfaces of trimeric SUN proteins

Linker of nucleoskeleton and cytoskeleton (LINC) complexes span the nuclear envelope and are composed of KASH and SUN proteins residing in the outer and inner nuclear membrane, respectively. LINC formation relies on direct binding of KASH and SUN in the perinuclear space. Thereby, molecular tethers are formed that can transmit forces for chromosome movements, nuclear migration, and anchorage. We present crystal structures of the human SUN2-KASH1/2 complex, the core of the LINC complex. The SUN2 domain is rigidly attached to a trimeric coiled coil that prepositions it to bind three KASH peptides. The peptides bind in three deep and expansive grooves formed between adjacent SUN domains, effectively acting as molecular glue. In addition, a disulfide between conserved cysteines on SUN and KASH covalently links both proteins. The structure provides the basis of LINC complex formation and suggests a model for how LINC complexes might arrange into higher-order clusters to enhance force-coupling.     

Inhibition of the binding of penicillin to the pneumococcal penicillin-binding proteins (PBPs) by exogenous cell wall peptides

Incubation of pneumococci with D-alanine-containing peptides naturally occurring in peptidoglycan protected cells against lysis and killing by beta-lactam antibiotics near MIC. Such peptides caused decreased binding of the antibiotic to penicillin-binding proteins (PBPs), primarily PBP 2B. This provides direct evidence in vivo for the hypothesis that beta-lactams act as substrate analogues and identifies PBP 2B as a killing target in pneumococci.     

An assessment of protein-ligand binding site polarizability

Electronic polarizability, an important physical property of biomolecules, is currently ignored in most biomolecular calculations. Yet, it is widely believed that polarization could account for a substantial fraction of the total nonbonded energy of a system. This belief is supported by studies of small complexes in vacuum. This perception is driving the development of a new class of polarizable force fields for biomolecular calculations. However, the quantification of this term for protein-ligand complexes has never been attempted. Here we explore the polarizable nature of protein-ligand complexes in order to evaluate the importance of this effect. We introduce two indexes describing the polarizability of protein binding sites. These we apply to a large range of pharmaceutically relevant complexes. We offer a recommendation of particular complexes as test systems with which to determine the effects of polarizability and as test cases with which to test the new generation of force fields. Additionally, we provide a tabulation of the amino acid composition of these binding sites and show that composition can be specific for certain classes of proteins. We also show that the relative abundance of some amino acids is different in binding sites than elsewhere in a protein's structure.