Purification and characterization of a new carbonyl reductase from Leifsonia xyli HS0904 involved in stereoselective reduction of 3,5-bis(trifluoromethyl) acetophenone

Leifsonia xyli HS0904 can stereoselectively catalyze the bioreduction of 3,5-bis(trifluoromethyl) acetophenone (BTAP) to its corresponding alcohol, which is a valuable chiral intermediate in the pharmaceuticals. In this study, a new carbonyl reductase derived from L. xyli HS0904 was purified and its biochemical properties were determined in detail. The carbonyl reductase was purified by 530-fold with a specific activity of 13.2 U mg⁻¹ and found to be a homodimer with a molecular mass of 49 kDa, in which the subunit molecular-weight was about 24 kDa. The purified enzyme exhibited a maximum enzyme activity at 34 °C and pH 7.2, and retained over 90% of its initial activity at 4 °C and pH 7.0 for 24 h. The addition of various additives, such as Ca²⁺, Mg²⁺, Mn²⁺, l-cysteine, l-glutathione, urea, PEG 1000 and PEG 4000, could enhance the enzyme activity. The maximal reaction rate (V_max) and apparent Michaelis–Menten constant (K_m) of the purified carbonyl reductase for BTAP and NADH were confirmed as 33.9 U mg⁻¹, 0.383 mM and 69.9 U mg⁻¹, 0.412 mM, respectively. Furthermore, this enzyme was found to have a broad spectrum of substrate specificity and can asymmetrically catalyze the reduction of a variety of ketones and keto esters.     

Purification and characterization of a nitroreductase from the soil bacterium Streptomyces mirabilis

A NADH-dependent nitroreductase from an efficient nitro-reducing soil bacterium, Streptomyces mirabilis DUT001, was isolated and characterized. The enzyme was purified to near homogeneity using ammonium sulfate precipitation, ion exchange chromatography, and gel filtration chromatography. The native enzyme was estimated by gel filtration to have a molecular weight of 68 kDa, and its subunit molecular weight determined by SDS-PAGE was about 34 kDa, which indicated this enzyme was a dimer. Polycyclic nitroaromatic compounds were preferred substrates for this enzyme. The purified enzyme exhibited maximum activity at pH 7.5 and 40 °C. The addition of various chemicals such as reducing agents, metal ions, and chelating agents, had effects on enzyme activity. Mg²⁺, Ca²⁺, Sr²⁺, and 1% (w/v) Triton X-100 increased activity. However, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and SDS reduced activity. The maximum reaction rate (V_max) was 64 μM min^?1 mg^?1 enzyme and the apparent Michaelis–Menten constants (K_m) for 4-nitro-1,8-naphthalic anhydride and NADH were 276 and 29 μM, respectively. Menadione, bimethylenebis, sodium benzoate, and antimycin A were inhibitors of the purified nitroreductase with apparent inhibition constants (K_is) of 20, 36, 44 and 80 μM, respectively.     

Characterization and inhibition effects of some metal ions on carbonic anhydrase enzyme from Kangal Akkaraman sheep

In this work, the carbonic anhydrase (CA) enzyme was purified from Kangal Akkaraman sheep in Sivas, Turkey with specific activity value of 6681.57 EU/mg and yield of 14.90% with using affinity column chromatography. For designating the subunit molecular mass and enzyme purity, sodium dodecyl sulfate polyacrylamide gel electrophoresis method was used and single band for this procedure was obtained. The molecular mass of CA enzyme was found as 28.89 kDa. In this study, the optimum temperature and optimum pH were obtained from 30 and 7.5. V_max and K_m values for p‐nitrophenylacetate substrate of the CA were determined from Lineweaver–Burk graphs. Additionally, the inhibitory results of diverse heavy metal ions (Hg⁺, Fe²⁺, Pb²⁺, Co²⁺, Ag⁺, and Cu²⁺) on sheep were studied. Indeed, CA enzyme activities of Kangal sheep were investigated with using esterase procedure under in vitro conditions. The heavy metal concentrations inhibiting 50% of enzyme activity (IC₅₀) and K_i values were obtained.     

Purification and properties of phenolic acid decarboxylase from Candida guilliermondii

A heat-labile phenolic acid decarboxylase from Candida guilliermondii (an anamorph of Pichia guilliermondii) was purified to homogeneity by simple successive column chromatography within 3 days. The molecular mass was 20 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and 36 kDa by gel-filtration chromatography, suggesting that the purified enzyme is a homodimer. The optimal pH and temperature were approximately 6.0 and 25°C. Characteristically, more than 50% of the optimal activity was observed at 0°C, suggesting that this enzyme is cold-adapted. The enzyme converted p-coumaric acid, ferulic acid, and caffeic acid to corresponding products with high specific activities of approximately 600, 530, and 46 U/mg, respectively. The activity was stimulated by Mg²⁺ ions, whereas it was completely inhibited by Fe²⁺, Ni²⁺, Cu²⁺, Hg²⁺, 4-chloromericuribenzoate, N-bromosuccinimide, and diethyl pyrocarbonate. The enzyme was inducible and expressed inside the cells moderately by ferulic acid and p-coumaric acid and significantly by non-metabolizable 6-hydroxy-2-naphthoic acid.     

Characterization of chitinase from Streptomyces luridiscabiei U05 and its antagonist potential against fungal plant pathogens

Streptomyces luridiscabiei U05 was isolated from wheat rhizosphere. It produced chitinase, which showed in vitro antifungal properties. The crude enzyme inhibited the growth of Alternaria alternata, Fusarium oxysporum, F. solani, Botrytis cinerea, F. culmorum and Penicillium verrucosum. The chitinase enzyme of the molecular weight of 45 kDa was purified using affinity chromatography of chitin. Streptomyces luridiscabiei U05 produced different chitinolytic enzymes. The highest enzyme activity was observed with the use of 4‐MU‐(GlcNAc)_, which points to the presence of an β‐N‐acetylhexosaminidase. The optimum activity was obtained at 35–40°C and pH 7–8. The enzyme showed thermostability at 35–40°C during 240 min of preincubation and lost its activity at 50°C and 60°C in 60 min. The chitinase activity from S. luridiscabei U05 was strongly inhibited by Hg²⁺ and Pb²⁺ ions, and sodium dodecyl sulphate (SDS). The Ca²⁺, Cu²⁺ and Mg²⁺ ions stimulated the activity of the enzyme.     

Isolation and characterization of a d-glucose/xylose isomerase from a new thermophilic strain Streptomyces sp. (PLC)

A thermostable d-xylase isomerase from a newly isolated thermophilic Streptomyces sp. (PLC) strain is described. The enzyme was purified to homogeneity. It is a homotetramer with a native molecular mass of 183 kDa and a subunit molecular mass of 46 kDa. The enzyme has a K _m of 35 mM for d-xylose and also accepts d-glucose as substrate, however, with a tenfold higher K _m (0.4 M) and half the maximum velocity. Both the activity and stability of this d-xylose isomerase depend strongly on divalent metal ions. Two metal ions bind per subunit to non-identical sites. Mg²⁺, Mn²⁺ and Co²⁺ are of comparable efficiency for the d-xylose isomerase reaction. Con²⁺ is the most efficient cofactor for d-glucose isomerization. The enzyme remains fully active up to 95°C. The activity decreases at 53°C in the presence of Co²⁺ and Mg²⁺ with a half-life of 7 and 9 days respectively. In the presence of Mn²⁺ the enzyme activity remains constant for at least 10 days and at 70°C 50% of the activity is lost after 5 days.     

A Novel Ferric Reductase Purified from <Emphasis Type="Italic">Magnetospirillum gryphiswaldense</Emphasis> MSR-1

A ferric reductase was purified into an electrophoretically homologous state from Magnetospirillum gryphiswaldense MSR-1 strain. The enzyme was found within the cytoplasm and associated with the cytoplasmic membrane. The molecular weight of the purified enzyme was calculated as 16.1 kDa using sodium dodecyl sulfate–polyacrylamide gel electrophoresis, and was almost identical to that calibrated using agarose gel filtration chromatography. It was NADH-dependent and required flavin mononucleotide as a cofactor. The optimal reaction temperature and pH values were 30°C and 6.5, respectively. The K _m and Vmax values for ferric citrate were 45.1 μM and 1.216 μM min⁻¹, respectively. Though ferric reductase activity could be inhibited by Co²⁺, Cu²⁺, Mn²⁺, and Zn²⁺, even high concentrations of Mg²⁺ ions have failed to accomplish such enzyme inhibition. Furthermore, the molecular weight, the N-terminal sequence, and the activity of ferric reductase from MSR-1 are not matching with the enzyme preparation obtained from an analogous strain M. magnetotacticum (MS-1). Therefore, it is concluded that the ferric reductase of M. grysphiwaldense and M. magnetotacticum strains are two different enzymes.     

Characterization of trehalose synthase from <Emphasis Type="Italic">Corynebacterium nitrilophilus</Emphasis> NRC

Trehalose synthase (TSII) from Corynebacterium nitrilophilus NRC was successively purified by ammonium sulphate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-100 columns. The specific activity of the trehalose synthase was increased ~200-fold, from 0.14 U mg⁻¹ protein to 28.3 U mg⁻¹ protein. TSII was found to be a monomeric protein with a molecular weight of 67–69 kDa. Characterization of the enzyme exhibited optimum pH and temperature were 7.5 and 35°C, respectively. The purified enzyme was stable from pH 6.6 to 7.8 and able to prolong its thermal stability up to 35°C. The enzyme activity was inhibited strongly by Zn²⁺, Hg²⁺ and Cu²⁺ and moderately by Ba²⁺, Fe²⁺, Pb²⁺ and Ni²⁺. Other metal ions Ca²⁺, Mg²⁺, Co²⁺, Mn²⁺ and EDTA had almost no effect.     

Purification and Characterization of Invertase from Lactobacillus reuteri CRL 1100

The invertase of Lactobacillus reuteri CRL 1100 is a glycoprotein composed by a single subunit with a molecular weight of 58 kDa. The enzyme was stable below 45°C over a wide pH range (4.5–7.0) with maximum activity at pH 6.0 and 37°C. The invertase activity was significantly inhibited by bivalent metal ions (Ca⁺⁺, Cu⁺⁺, Cd⁺⁺, and Hg⁺⁺), β-mercaptoethanol, and dithiothreitol and partially improved by ethylenediaminetetraacetic acid. The enzyme was purified 32 times over the crude extract by gel filtration and ion-exchange chromatography with a recovery of 17%. The K _m and V_max values for sucrose were 6.66 mM and 0.028 μmol/min, respectively. An invertase is purified and characterized for the first time in Lactobacillus, and it proved to be a β-fructofuranosidase. Received: 13 August 1999 / Accepted: 15 September 1999     

An L-arabinose isomerase from Acidothermus cellulolytics ATCC 43068: cloning, expression, purification, and characterization

The araA gene encoding an L-arabinose isomerase (L-AI) from the acido-thermophilic bacterium Acidothermus cellulolytics ATCC 43068 was cloned and overexpressed in Escherichia coli. The open reading frame of the L-AI consisted of 1,503 nucleotides encoding 501 amino acid residues. The recombinant L-AI was purified to homogeneity by heat treatment, ion-exchange chromatography, and gel filtration. The molecular mass of the enzyme was estimated to be approximately 55 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme was optimally active at 75°C and pH 7.5. It required divalent metal ions, either Mn²⁺ or Co²⁺, for both enzymatic activity and thermostability improvement at higher temperatures. The enzyme showed relatively high activity and stability at acidic pH. It exhibited over 90% of its maximal activity at pH 6.0 and retained 80% of activity after 12 h incubation at pH 6.0. Catalytic property study showed that the enzyme had an interesting catalytic efficiency. Its apparent K _m, V _max, and catalytic efficiency (k _cat/K _m) for D-galactose was 28.9 mM, 4.9 U/mg, and 9.3 mM⁻¹ min⁻¹, respectively. The enzyme carried out the isomerization of D-galactose to D-tagatose with a conversion yield over 50% after 12 h under optimal conditions, suggesting its potential in D-tagatose production.     

Purification and physicochemical properties of polygalacturonase from Aspergillus niger MTCC 3323

Polygalacturonases are the pectinolytic enzymes that catalyze the hydrolytic cleavage of the polygalacturonic acid chain. In the present study, polygalacturonase from Aspergillus niger (MTCC 3323) was purified. The enzyme precipitated with 60% ethanol resulted in 1.68-fold purification. The enzyme was purified to 6.52-fold by Sephacryl S-200 gel-filtration chromatography. On SDS–PAGE analysis, enzyme was found to be a heterodimer of 34 and 69 kDa subunit. Homogeneity of the enzyme was checked by NATIVE-PAGE and its molecular weight was found to be 106 kDa. The purified enzyme showed maximum activity in the presence of polygalacturonic acid at temperature of 45 °C, pH of 4.8, reaction time of 15 min. The enzyme was stable within the pH range of 4.0–5.5 for 1 h. At 4 °C it retained 50% activity after 108 h but at room temperature it lost its 50% activity after 3 h. The addition of Mn²⁺, K⁺, Zn²⁺, Ca²⁺ and Al³⁺ inhibited the enzyme activity; it increased in the presence of Mg²⁺ and Cu²⁺ ions. Enzyme activity was increased on increasing the substrate concentration from 0.1% to 0.5%. The K_m and V_max values of the enzyme were found to be 0.083 mg/ml and 18.21 μmol/ml/min. The enzyme was used for guava juice extraction and clarification. The recovery of juice of enzymatically treated pulp increased from 6% to 23%. Addition of purified enzyme increased the %T₆₅₀ from 2.5 to 20.4 and °Brix from 1.9 to 4.8. The pH of the enzyme treated juice decreased from 4.5 to 3.02.     

Purification of glucose‐6‐phosphate dehydrogenase from rat (Rattus norvegicus) erythrocytes and inhibition effects of some metal ions on enzyme activity

Glucose‐6‐phosphate dehydrogenase (G6PD) is the first enzyme on which the pentose phosphate pathway was checked. In this study, purification of a G6PD enzyme was carried out by using rat erythrocytes with a specific activity of 13.7 EU/mg and a yield of 67.7 and 155.6‐fold by using 2′,5′‐ADP Sepharose‐4B affinity column chromatography. For the purpose of identifying the purity of enzyme and molecular mass of the subunit, a sodium dodecyl sulfate‐polyacrylamide gel electrophoresis was carried out. The molecular mass of subunit was calculated 56.5 kDa approximately. Then, an investigation was carried out regarding the inhibitory effects caused by various metal ions (Fe²⁺, Pb²⁺, Cd²⁺, Ag⁺, and Zn²⁺) on G6PD enzyme activities, as per Beutler method at 340 nm under in vitro conditions. Lineweaver–Burk diagrams were used for estimation of the IC₅₀ and K_i values for the metals. K_i values for Pb⁺², Cd⁺², Ag⁺, and Zn⁺² were 113.3, 215.2, 19.4, and 474.7 μM, respectively.     

Purification and characterization of carbonyl reductase from Geotrichum candidum

Geotrichum candidum is well known for the reduction of prochiral ketones to chiral alcohol with high yield and excellent enantioselectivity. Carbonyl reductase from G. candidum was purified by ammonium sulphate precipitation, anion exchange and hydrophobic interaction chromatographies. Gel filtration chromatography together with SDS-PAGE revealed this protein to be a dimer of 60 kDa subunits. Maximum enzyme activity was found in acetate buffer at pH 5.4 with t_1/2 of 7.13 h at 30 °C and t_1/2 of 2.8 h at 65 °C. The enzyme was inhibited by p-hydroxymercuribenzoate and hydroxylamine indicating the involvement of thiol and carbonyl groups in the reduction reaction catalyzed by the enzyme. Chelating agents also reduced the enzyme activity indicating the requirement of metal ions as cofactors. The purified carbonyl reductase was found to be highly selective for ketones containing naphthyl ring, whereas aryl or hetero-aryl ketones showed very less or no activity at all.     

Purification and characterization of chitinases from <Emphasis Type="Italic">Paecilomyces</Emphasis><Emphasis Type="Italic">variotii</Emphasis> DG-3 parasitizing on <Emphasis Type="Italic">Meloidogyne incognita</Emphasis> eggs

Two extracellular chitinases were purified from Paecilomyces variotii DG-3, a chitinase producer and a nematode egg-parasitic fungus, to homogeneity by DEAE Sephadex A-50 and Sephadex G-100 chromatography. The purified enzymes were a monomer with an apparent molecular mass of 32 kDa (Chi32) and 46 kDa (Chi46), respectively, and showed chitinase activity bands with 0.01% glycol chitin as a substrate after SDS-PAGE. The first 20 and 15 N-terminal amino acid sequences of Chi32 and Chi46 were determined to be Asp-Pro-Typ-Gln-Thr-Asn-Val-Val-Tyr-Thr-Gly-Gln-Asp-Phe-Val-Ser-Pro-Asp-Leu-Phe and Asp-Ala-X-X-Tyr-Arg-Ser-Val-Ala-Tyr-Phe-Val-Asn-Trp-Ala, respectively. Optimal temperature and pH of the Chi32 and Chi46 were found to be both 60°C, and 2.5 and 3.0, respectively. Chi32 was almost inhibited by metal ions Ag⁺ and Hg²⁺ while Chi46 by Hg²⁺ and Pb²⁺ at a 10 mM concentration but both enzymes were enhanced by 1 mM concentration of Co²⁺. On analyzing the hydrolyzates of chitin oligomers [(GlcNAc) _n , n = 2–6)], it was considered that Chi32 degraded chitin oligomers as an exo-type chitinase while Chi46 as an endo-type chitinase.     

Cloning and functional expression of a nitrile hydratase (NHase) from Rhodococcus equi TG328-2 in Escherichia coli, its purification and biochemical characterisation

The nitrile hydratase (NHase, EC 4.2.1.84) genes (α and β subunit) and the corresponding activator gene from Rhodococcus equi TG328-2 were cloned and sequenced. This Fe-type NHase consists of 209 amino acids (α subunit, M_r 23 kDa) and 218 amino acids (β subunit, M_r 24 kDa) and the NHase activator of 413 amino acids (M_r 46 kDa). Various combinations of promoter, NHase and activator genes were constructed to produce active NHase enzyme recombinantly in E. coli. The maximum enzyme activity (844 U/mg crude cell extract towards methacrylonitrile) was achieved when the NHase activator gene was separately co-expressed with the NHase subunit genes in E. coli BL21 (DE3). The overproduced enzyme was purified with 61% yield after French press, His-tag affinity chromatography, ultrafiltration and lyophilization and showed typical Fe-type NHase characteristics: besides aromatic and heterocyclic nitriles, aliphatic ones were hydrated preferentially. The purified enzyme had a specific activity of 6,290 U/mg towards methacrylonitrile. Enantioselectivity was observed for aromatic compounds only with E values ranging 5–17. The enzyme displayed a broad pH optimum from 6 to 8.5, was most active at 30°C and showed the highest stability at 4°C in thermal inactivation studies between 4°C and 50°C.     

Expression and characterization of <Emphasis Type="Italic">Trichoderma virens</Emphasis> UKM-1 endochitinase in <Emphasis Type="Italic">Escherichia</Emphasis> <Emphasis Type="Italic">coli</Emphasis>

A gene encoding endochitinase from Trichoderma virens UKM-1 was cloned and expressed in E. coli BL21 (DE3). Both the endochitinase gene and its cDNA sequences were obtained. The endochitinase gene encodes 430 amino acids from an open reading frame comprising of 1,690 bp nucleotide sequence with three introns. The endochitinase was expressed as soluble and active enzyme at 20°C when induced with 1 mM IPTG. Maximum activity was observed at 4 h of post-induction time. SDS-PAGE showed that the purified endochitinase exhibited a single band with molecular weight of 42 kDa. Biochemical characterization of the enzyme displayed a near neutral pH characteristic with an optimum pH at 6.0 and optimum temperature at 50°C. The enzyme is stable between pH 3.0–7.0 and is able to retain its activity from 30 to 60°C. The presence of Mg²⁺ and Ca²⁺ ions increased the enzyme activity up to 20%. The purified enzyme has a strong affinity towards colloidal chitin and low effect on ethyl cellulose and D-cellubiose which are non-chitin related substrates. HPLC analysis from the chitin hydrolysis showed the release of (GlcNAc)₃, (GlcNAc)₂ and GlcNAc, in which (GlcNAc)₂ was the main product.     

Molecular cloning and heterologous expression of an acid stable xylanase gene from <Emphasis Type="Italic">Alternaria</Emphasis> sp. HB186

A new xylanase gene, named xyn186, was cloned by the genome-walking PCR method from the Alternaria sp. HB186. The sequence of xyn186 contains a 748 bp open reading frame separated by one intron with the size of 52 bp. The cDNA was obtained by DpnI-mediated intron deletion. The cDNA was cloned into pHBM905A and transformed into Pichia pastoris GS115 to screen xylanase-secreting transformants on RBB-xylan plates. The molecular mass of the enzyme was estimated to be 23 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 50°C, respectively. The K _m and V _max valued for birchwood xylan are 1.404 mg ml⁻¹ and 0.2748 mmol min⁻¹ mg⁻¹, respectively. The inhibitory effects of various metal ions were investigated, Cu²⁺ and Hg²⁺ ions inhibited most of the enzyme activity. The gene copy number of xyn186 in the genome of P. pastoris was estimated as two by the Real-time PCR. To date, xyn186 gene is the first xylanase gene cloned from the genus Alternaria.     

Biochemical and Biophysical Characterization of Purified Thermophilic Xylanase Isoforms in Cereus pterogonus Plant Spp

Two thermostable xylanase isoforms T₆₀ and T₈₀ were purified to homogeneity from the cladodes of the xerophytic Cereus pterogonus plant species. After three consecutive purification steps, the specific activity of T₆₀ and T₈₀ isoforms were found to be 178.6 and 216.2 U mg⁻¹ respectively. The molecular mass of both isoforms was determined to be 80 kDa. The optimum temperature for T₆₀ and T₈₀ xylanase isoforms were 60 and 80 °C respectively. The pH was 5.0 for both isoforms. The presence of divalent metal ions (10 mM Co²⁺) showed stimulatory effects of both catalytic activities, where as in the presence of Hg²⁺, Cd²⁺, Cu²⁺ showed inhibitory effect on these activities at all concentrations studied. The thermodynamic analysis of xylanase activity using denaturation kinetics and the presence divalent cations at 30–100 °C, showed lower ΔH, ΔS, and ΔG values at all the temperatures investigated. The melting temperature of purified T₈₀ xylanase isoform as determined by TG/DTA analysis and it showed the unfolding temperature was 80 °C. The g value and hyperfine (A) value purified xylanase T₈₀ isoform was 2.017 and 10.80 respectively. Immunoblot analysis with antiserum raised against the purified T₈₀ xylanase isoforms revealed single immunolgically related polypeptides of 80 kDa, identical with the polypeptide band produced on SDS-PAGE. The results of double immunodiffusion against the T₈₀ isoforms showed a single precipitin line indicating that the serum used was specific to these xylanase isoforms. The kinetic and thermodynamic properties suggested that xylanase from C. pterogonus may have a potential usage in various industries.     

Biochemical characterization of Helicobacter pylori α-1,4 fucosyltransferase: metal ion requirement, donor substrate specificity and organic solvent stability

The effect of metal ions on the activity, the donor substrate specificity, and the stability in organic solvents of Helicobacter pylori α-1,4 fucosyltransferase were studied. The recombinant enzyme was expressed as soluble form in E. coli strain AD494 and purified in a one step affinity chromatography. Its activity was highest in cacodylate buffer at pH 6.5 in the presence of 20 mM Mn²⁺ ions at 37°C. Mn²⁺ ions could be substituted by other metal ions. In all cases, Mn²⁺ ions proofed to be the most effective (Mn²⁺ > Co²⁺ > Ca²⁺ > Mg²⁺ > Cu²⁺ > Ni²⁺ > EDTA). The enzyme shows substrate specificity for Type I disaccharide (1) with a K _M of 114 μM. In addition, the H. pylori α-1,4 fucosyltransferase efficiently transfers GDP-activated l-fucose derivatives to Galβ1-3GlcNAc-OR (1). Interestingly, the presence of organic solvents such as DMSO and methanol up to 20% in the reaction medium does not affect significantly the enzyme activity. However, at the same concentration of dioxane, activity is totally abolished.     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.