Crystal structure and enhanced activity of a cutinase‐like enzyme from Cryptococcus sp. strain S‐2

The structural and enzymatic characteristics of a cutinase‐like enzyme (CLE) from Cryptococcus sp. strain S‐2, which exhibits remote homology to a lipolytic enzyme and a cutinase from the fungus Fusarium solani (FS cutinase), were compared to investigate the unique substrate specificity of CLE. The crystal structure of CLE was solved to a 1.05 Å resolution. Moreover, hydrolysis assays demonstrated the broad specificity of CLE for short and long‐chain substrates, as well as the preferred specificity of FS cutinase for short‐chain substrates. In addition, site‐directed mutagenesis was performed to increase the hydrolysis activity on long‐chain substrates, indicating that the hydrophobic aromatic residues are important for the specificity to the long‐chain substrate. These results indicate that hydrophobic residues, especially the aromatic ones exposed to solvent, are important for retaining lipase activity. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

Chemically reprogramming the phospho‐transfer reaction to crosslink protein kinases to their substrates

The proteomic mapping of enzyme–substrate interactions is challenged by their transient nature. A method to capture interacting protein kinases in complexes with a single substrate of interest would provide a new tool for mapping kinase signaling networks. Here, we describe a nucleotide‐based substrate analog capable of reprogramming the wild‐type phosphoryl‐transfer reaction to produce a kinase‐acrylamide‐based thioether crosslink to mutant substrates with a cysteine nucleophile substituted at the native phosphorylation site. A previously reported ATP‐based methacrylate crosslinker (ATP‐MA) was capable of mediating kinase crosslinking to short peptides but not protein substrates. Exploration of structural variants of ATP‐MA to enable crosslinking of protein substrates to kinases led to the discovery that an ADP‐based methacrylate (ADP‐MA) crosslinker was superior to the ATP scaffold at crosslinking in vitro. The improved efficiency of ADP‐MA over ATP‐MA is due to reduced inhibition of the second step of the kinase–substrate crosslinking reaction by the product of the first step of the reaction. The new probe, ADP‐MA, demonstrated enhanced in vitro crosslinking between the Src tyrosine kinase and its substrate Cortactin in a phosphorylation site‐specific manner. The kinase–substrate crosslinking reaction can be carried out in a complex mammalian cell lysate setting, although the low abundance of endogenous kinases remains a significant challenge for efficient capture.     

Biochemical characterization of two haloalkane dehalogenases: DccA from Caulobacter crescentus and DsaA from Saccharomonospora azurea

Two putative haloalkane dehalogenases (HLDs) of the HLD‐I subfamily, DccA from Caulobacter crescentus and DsaA from Saccharomonospora azurea, have been identified based on sequence comparisons with functionally characterized HLD enzymes. The two genes were synthesized, functionally expressed in E. coli and shown to have activity toward a panel of haloalkane substrates. DsaA has a moderate activity level and a preference for long (greater than 3 carbons) brominated substrates, but little activity toward chlorinated alkanes. DccA shows high activity with both long brominated and chlorinated alkanes. The structure of DccA was determined by X‐ray crystallography and was refined to 1.5 Å resolution. The enzyme has a large and open binding pocket with two well‐defined access tunnels. A structural alignment of HLD‐I subfamily members suggests a possible basis for substrate specificity is due to access tunnel size.     

KDAC8 substrate specificity quantified by a biologically relevant,label‐free deacetylation assay

Analysis of the human proteome has identified thousands of unique protein sequences that contain acetylated lysine residues in vivo. These modifications regulate a variety of biological processes and are reversed by the lysine deacetylase (KDAC) family of enzymes. Despite the known prevalence and importance of acetylation, the details of KDAC substrate recognition are not well understood. While several methods have been developed to monitor protein deacetylation, none are particularly suited for identifying enzyme‐substrate pairs of label‐free substrates across the entire family of lysine deacetylases. Here, we present a fluorescamine‐based assay which is more biologically relevant than existing methods and amenable to probing substrate specificity. Using this assay, we evaluated the activity of KDAC8 and other lysine deacetylases, including a sirtuin, for several peptides derived from known acetylated proteins. KDAC8 showed clear preferences for some peptides over others, indicating that the residues immediately surrounding the acetylated lysine play an important role in substrate specificity. Steady‐state kinetics suggest that the sequence surrounding the acetylated lysine affects binding affinity and catalytic rate independently. Our results provide direct evidence that potential KDAC8 substrates previously identified through cell based experiments can be directly deacetylated by KDAC8. Conversely, the data from this assay did not correlate well with predictions from previous screens for KDAC8 substrates using less biologically relevant substrates and assay conditions. Combining results from our assay with mass spectrometry‐based experiments and cell‐based experiments will allow the identification of specific KDAC‐substrate pairs and lead to a better understanding of the biological consequences of these interactions.     

The Auxiliary Substrate Concept: From simple considerations to heuristically valuable knowledge

Microorganisms are used in biotechnology. They are either (i) aim and purpose of a process, e.g. with the production of single cell proteins, or (ii) mean to an end insofar as they serve as a catalyst or “factory” for syntheses (e.g. of products of primary and secondary metabolism, of enzymes and antibiotics) or for the degradation and detoxification of harmful organics and inorganics. In all cases, the efficiency and velocity, finally the productivity, are parameters which essentially determine the economy of the processes. Therefore, search for approaches to optimize these processes is a permanent task and challenge for scientists and engineers. It is shown that the auxiliary substrate concept is suitable to increase the yield coefficients. It is based on the energetic evaluation of organics, on the knowledge that organics as sources of carbon and energy for growth are deficient in ATP and/or reducing equivalents, and says that it is possible to improve the carbon conversion efficiency up to the carbon metabolism determined upper limit. The latter is determined by inevitable losses of carbon along the way of assimilation and anabolism and amounts to about 85% for so‐called glycolytic substrates, e.g. glucose, methanol, and to about 75% for gluconeogenetic substrates, e.g. C₂‐substrates (acetic acid, hexadecane). The approach is explained and some experimental examples are presented. By simultaneous utilization of an extra energy source (auxiliary substrate) the yield coefficient can be increased (i) in glucose from about 0.5 to 0.7 g/g (by means of formate), (ii) in acetate from 0.34–0.4 to 0.5–0.65 g/g (by means of formate and thiosulfate, respectively), and (iii) in hexadecane from about 0.94 to 1.26 g/g (by means of formate). The precalculated yield coefficients and mixing ratios agree well with the experimentally attained ones. The approach is easily feasible and economically valuable.     

Substrate specificity characterization for eight putative nudix hydrolases. Evaluation of criteria for substrate identification within the Nudix family

The nearly 50,000 known Nudix proteins have a diverse array of functions, of which the most extensively studied is the catalyzed hydrolysis of aberrant nucleotide triphosphates. The functions of 171 Nudix proteins have been characterized to some degree, although physiological relevance of the assayed activities has not always been conclusively demonstrated. We investigated substrate specificity for eight structurally characterized Nudix proteins, whose functions were unknown. These proteins were screened for hydrolase activity against a 74‐compound library of known Nudix enzyme substrates. We found substrates for four enzymes with k_cat/K_m values >10,000 M^?1 s^?1: Q92EH0_LISIN of Listeria innocua serovar 6a against ADP‐ribose, Q5LBB1_BACFN of Bacillus fragilis against 5‐Me‐CTP, and Q0TTC5_CLOP1 and Q0TS82_CLOP1 of Clostridium perfringens against 8‐oxo‐dATP and 3'‐dGTP, respectively. To ascertain whether these identified substrates were physiologically relevant, we surveyed all reported Nudix hydrolytic activities against NTPs. Twenty‐two Nudix enzymes are reported to have activity against canonical NTPs. With a single exception, we find that the reported k_cat/K_m values exhibited against these canonical substrates are well under 10⁵ M^?1 s^?1. By contrast, several Nudix enzymes show much larger k_cat/K_m values (in the range of 10⁵ to >10⁷ M^?1 s^?1) against noncanonical NTPs. We therefore conclude that hydrolytic activities exhibited by these enzymes against canonical NTPs are not likely their physiological function, but rather the result of unavoidable collateral damage occasioned by the enzymes' inability to distinguish completely between similar substrate structures. Proteins 2016; 84:1810–1822. © 2016 The Authors Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc.     

Kinetic Modeling of Amino Acid Oxidation Catalyzed by a New D‐Amino Acid Oxidase from Arthrobacter protophormiae

Amino acid oxidases, which enantiospecifically catalyze the oxidative deamination of either D‐ or L‐amino acids, belong to the class of oxidoreductases functioning with a tightly bound cofactor. This cofactor favors industrial applications of D‐amino acid oxidases (D‐AAO). Hence, the enzyme is very important for the industrial application in the purification and determination of certain amino acids. In developing the enzyme‐catalyzed reaction for large‐scale production, modeling of the reaction kinetics plays an important role. Therefore, the subject of this study was the kinetics of the oxidative deamination, a very complex reaction system, which is catalyzed by D‐AAO from Arthrobacter protophormiae using its natural substrate D‐methionine and the aromatic amino acid 3,4‐dihydroxyphenyl‐D‐alanine (D‐DOPA). The kinetic parameters determined by the measurement of the initial rate and nonlinear regression were verified in batch reactor experiments by comparing calculated and experimental concentration‐time curves. It was found that the enzyme is highly specific towards D‐methionine (K_m = 0.24 mM) and not as specific to D‐DOPA as a substrate (K_m = 9.33 mM). The enzyme activity towards D‐methionine ( = 3.01 U/mL) was approx. seven times higher than towards D‐DOPA ( = 20.01 U/mL). The enzyme exhibited no activity towards L‐methionine and L‐DOPA. Batch and repetitive batch experiments were performed with both substrates in the presence and in the absence of catalase for hydrogen peroxide decomposition. Their comparison made it possible to conclude that hydrogen peroxide has no negative influence on the enzyme activity.     

Kinetic properties and substrate inhibition of α-galactosidase from Aspergillus niger

The recombinant AglB produced by Pichia pastoris exhibited substrate inhibition behavior for the hydrolysis of p-nitrophenyl α-galactoside, whereas it hydrolyzed the natural substrates, including galactomanno-oligosaccharides and raffinose family oligosaccharides, according to the Michaelian kinetics. These contrasting kinetic behaviors can be attributed to the difference in the dissociation constant of second substrate from the enzyme and/or to the ability of the leaving group of the substrates. The enzyme displays the grater k_cat/K_m values for hydrolysis of the branched α-galactoside in galactomanno-oligosaccharides than that of raffinose and stachyose. A sequence comparison suggested that AglB had a shallow active-site pocket, and it can allow to hydrolyze the branched α-galactosides, but not linear raffinose family oligosaccharides.     

Structure of an acetylating aldehyde dehydrogenase from the thermophilic ethanologen Geobacillus thermoglucosidasius

Acetylating aldehyde dehydrogenases (AcAldDH) catalyse the acetylation of Coenzyme‐A (CoA), or in reverse generate acetaldehyde from Acetyl‐CoA using NADH as a co‐factor. This article reports the expression, purification, enzyme assay, and X‐ray crystal structures of an AcAldDH from Geobacillus thermoglucosidasius (GtAcAldDH) to 2.1Å and in complex with CoA and NAD⁺ to 4.0Å. In the structure, the AcAldDH forms a close‐knit dimer, similar to that seen in other Alcohol Dehydrogenase (ADH) structures. In GtAcAldDH, these dimers associate via their N‐termini to form weakly interacting tetramers. This mode of tetrameric association is also seen in an unpublished AcAldDH deposited in the PDB, but is in contrast to all other ADH structures, (including the one other published AcAldDH found in a bacterial microcompartment), in which the dimers bury a large surface area including the C‐termini. This novel mode of association sequesters the active sites and potentially reactive acyl‐enzyme intermediates in the center of the tetramer. In other respects, the structure is very similar to the other AcAldDH, binding the cofactors in a corresponding fashion. This similarity enabled the identification of a shortened substrate cavity in G. thermoglucosidasius AcAldDH, explaining the limitations on the length of substrate accepted by the enzyme.     

Crystal structure of Saccharomyces cerevisiae Aro8, a putative α‐aminoadipate aminotransferase

α‐Aminoadipate aminotransferase (AAA‐AT) catalyzes the amination of 2‐oxoadipate to α‐aminoadipate in the fourth step of the α‐aminoadipate pathway of lysine biosynthesis in fungi. The aromatic aminotransferase Aro8 has recently been identified as an AAA‐AT in Saccharomyces cerevisiae. This enzyme displays broad substrate selectivity, utilizing several amino acids and 2‐oxo acids as substrates. Here we report the 1.91Å resolution crystal structure of Aro8 and compare it to AAA‐AT LysN from Thermus thermophilus and human kynurenine aminotransferase II. Inspection of the active site of Aro8 reveals asymmetric cofactor binding with lysine‐pyridoxal‐5‐phosphate bound within the active site of one subunit in the Aro8 homodimer and pyridoxamine phosphate and a HEPES molecule bound to the other subunit. The HEPES buffer molecule binds within the substrate‐binding site of Aro8, yielding insights into the mechanism by which it recognizes multiple substrates and how this recognition differs from other AAA‐AT/kynurenine aminotransferases.     

Modification of PATase by L/F‐transferase generates a ClpS‐dependent N‐end rule substrate in Escherichia coli

The N‐end rule pathway is conserved from bacteria to man and determines the half‐life of a protein based on its N‐terminal amino acid. In Escherichia coli, model substrates bearing an N‐degron are recognised by ClpS and degraded by ClpAP in an ATP‐dependent manner. Here, we report the isolation of 23 ClpS‐interacting proteins from E. coli. Our data show that at least one of these interacting proteins—putrescine aminotransferase (PATase)—is post‐translationally modified to generate a primary N‐degron. Remarkably, the N‐terminal modification of PATase is generated by a new specificity of leucyl/phenylalanyl‐tRNA‐protein transferase (LFTR), in which various combinations of primary destabilising residues (Leu and Phe) are attached to the N‐terminal Met. This modification (of PATase), by LFTR, is essential not only for its recognition by ClpS, but also determines the stability of the protein in vivo. Thus, the N‐end rule pathway, through the ClpAPS‐mediated turnover of PATase may have an important function in putrescine homeostasis. In addition, we have identified a new element within the N‐degron, which is required for substrate delivery to ClpA.     

Structure-function relationship of substrate length specificity of dextran glucosidase from <Emphasis Type="Italic">Streptococcus mutans</Emphasis>

Dextran glucosidase from Streptococcus mutans (SMDG), an exo-type glucosidase of glycoside hydrolase (GH) family 13, specifically hydrolyzes an α-1,6-glucosidic linkage at the non-reducing ends of isomaltooligosaccharides and dextran. SMDG shows the highest sequence similarity to oligo-1,6-glucosidases (O16Gs) among GH family 13 enzymes, but these enzymes are obviously different in terms of substrate chain length specificity. SMDG efficiently hydrolyzes both short-and long-chain substrates, while O16G acts on only short-chain substrates. We focused on this difference in substrate specificity between SMDG and O16G, and elucidated the structure-function relationship of substrate chain length specificity in SMDG. Crystal structure analysis revealed that SMDG consists of three domains, A, B, and C, which are commonly found in other GH family 13 enzymes. The structural comparison between SMDG and O16G from Bacillus cereus indicated that Trp238, spanning subsites +1 and +2, and short β → α loop 4, are characteristic of SMDG, and these structural elements are predicted to be important for high activity toward long-chain substrates. The substrate size preference of SMDG was kinetically analyzed using two mutants: (i) Trp238 was replaced by a smaller amino acid, alanine, asparagine or proline; and (ii) short β → α loop 4 was exchanged with the corresponding loop of O16G. Mutant enzymes showed lower preference for long-chain substrates than wild-type enzyme, indicating that these structural elements are essential for the high activity toward long-chain substrates, as implied by structural analysis.     

Protein‐engineering of chitosanase from Bacillus sp. MN to alter its substrate specificity

Partially acetylated chitosan oligosaccharides (paCOS) have various potential applications in agriculture, biomedicine, and pharmaceutics due to their suitable bioactivities. One method to produce paCOS is partial chemical hydrolysis of chitosan polymers, but that leads to poorly defined mixtures of oligosaccharides. However, the effective production of defined paCOS is crucial for fundamental research and for developing applications. A more promising approach is enzymatic depolymerization of chitosan using chitinases or chitosanases, as the substrate specificity of the enzyme determines the composition of the oligomeric products. Protein‐engineering of these enzymes to alter their substrate specificity can overcome the limitations associated with naturally occurring enzymes and expand the spectrum of specific paCOS that can be produced. Here, engineering the substrate specificity of Bacillus sp. MN chitosanase is described for the first time. Two muteins with active site substitutions can accept N‐acetyl‐D‐glucosamine units at their subsite (?2), which is impossible for the wildtype enzyme.     

Pluripotentialities of a quenched fluorescent peptide substrate library: enzymatic detection, characterization, and isoenzymes differentiation

Protease inhibitors represent a major class of drugs, even though a large number of proteases remain unexplored. Consequently, a great interest lies in the identification of highly sensitive substrates useful for both the characterization and the validation of these enzyme targets and for the design of inhibitors as potential therapeutic agents through high-throughput screening (HTS). With this aim, a synthetic substrate library, in which the highly fluorescent (L)-pyrenylalanine residue (Pya) is efficiently quenched by its proximity with the p-nitro-(L)-phenylalanine (Nop) moiety, was designed. The cleavage between Pya and Nop leads to a highly fluorescent metabolite providing the required sensitivity. This library, characterized by a water-soluble primary sequence Ac-SGK-Pya-(X)_n-Nop-GGK-NH₂, X being a mixture of 10 natural amino acids (A, I, L, K, F, W, E, Q, T, P) and n varying from 0 to 3, was validated using enzymes belonging to the four main types of hydrolases: serine-, metallo-, cystein-, and aspartyl-proteases. The selectivity of substrates belonging to this library was evidenced by characterizing specific substrates for the isoenzymes NEP-1 and NEP-2. This library easily synthesized is of great interest for the identification and development of selective and specific substrates for still uncharacterized endoproteases.     

A lead discovery strategy driven by a comprehensive analysis of proteases in the peptide substrate space

We present here a comprehensive analysis of proteases in the peptide substrate space and demonstrate its applicability for lead discovery. Aligned octapeptide substrates of 498 proteases taken from the MEROPS peptidase database were used for the in silico analysis. A multiple‐category naïve Bayes model, trained on the two‐dimensional chemical features of the substrates, was able to classify the substrates of 365 (73%) proteases and elucidate statistically significant chemical features for each of their specific substrate positions. The positional awareness of the method allows us to identify the most similar substrate positions between proteases. Our analysis reveals that proteases from different families, based on the traditional classification (aspartic, cysteine, serine, and metallo), could have substrates that differ at the cleavage site (P1–P1′) but are similar away from it. Caspase‐3 (cysteine protease) and granzyme B (serine protease) are previously known examples of cross‐family neighbors identified by this method. To assess whether peptide substrate similarity between unrelated proteases could reliably translate into the discovery of low molecular weight synthetic inhibitors, a lead discovery strategy was tested on two other cross‐family neighbors—namely cathepsin L2 and matrix metallo proteinase 9, and calpain 1 and pepsin A. For both these pairs, a naïve Bayes classifier model trained on inhibitors of one protease could successfully enrich those of its neighbor from a different family and vice versa, indicating that this approach could be prospectively applied to lead discovery for a novel protease target with no known synthetic inhibitors.     

Identification and analysis of residues contained on β → α loops of the dual‐substrate (βα)8 phosphoribosyl isomerase A specific for its phosphoribosyl anthranilate isomerase activity

A good model to experimentally explore evolutionary hypothesis related to enzyme function is the ancient‐like dual‐substrate (βα)₈ phosphoribosyl isomerase A (PriA), which takes part in both histidine and tryptophan biosynthesis in Streptomyces coelicolor and related organisms. In this study, we determined the Michaelis–Menten enzyme kinetics for both isomerase activities in wild‐type PriA from S. coelicolor and in selected single‐residue monofunctional mutants, identified after Escherichia coli in vivo complementation experiments. Structural and functional analyses of a hitherto unnoticed residue contained on the functionally important β → α loop 5, namely, Arg¹³⁹, which was postulated on structural grounds to be important for the dual‐substrate specificity of PriA, is presented for the first time. Indeed, enzyme kinetics analyses done on the mutant variants PriA_Ser⁸¹Thr and PriA_Arg¹³⁹Asn showed that these residues, which are contained on β → α loops and in close proximity to the N‐terminal phosphate‐binding site, are essential solely for the phosphoribosyl anthranilate isomerase activity of PriA. Moreover, analysis of the X‐ray crystallographic structure of PriA_Arg¹³⁹Asn elucidated at 1.95 Å herein strongly implicates the occurrence of conformational changes in this β → α loop as a major structural feature related to the evolution of the dual‐substrate specificity of PriA. It is suggested that PriA has evolved by tuning a fine energetic balance that allows the sufficient degree of structural flexibility needed for accommodating two topologically dissimilar substrates—within a bifunctional and thus highly constrained active site—without compromising its structural stability.     

Structural and functional analysis of substrate recognition by the 250s loop in amylomaltase from Thermus brockianus

Amylomaltase, or 4‐α‐glucanotransferase (EC 2.4.1.25), is involved in glycogen and maltooligosaccharide metabolism in microorganisms, catalyzing both the hydrolysis and transfer of an α‐1,4‐oligosacchraride to other sugar molecules. In this study, we determined the crystal structure of amylomaltase from Thermus brockianus at a resolution of 2.3 Å and conducted a biochemical study to understand the detailed mechanism for its activity. Careful comparison with previous amylomaltase structures showed a pattern of conformational flexibility in the 250s loop with higher B‐factor. Amylomaltase from T. brockianus exhibited a high transglycosylation factor for glucose and a lower value for maltose. Mutation of Gln256 resulted in increased K_m for maltotriose and a sharp decrease of the transglycosylation factor for maltose, suggesting the involvement of Gln 256 in substrate binding between subsites +1 and +2. Mutation of Phe251 resulted in significantly lower glucose production but increased maltose production from maltopentose substrates, showing an altered substrate‐binding affinity. The mutational data suggest the conformational flexibility of the loop may be involved in substrate binding in the GH77 family. Here, we present an action model of the 250s loop providing the molecular basis for the involvement of residues Phe251, Gln256, and Trp258 in the hydrolysis and transglycosylation activities in amylomaltase. Proteins 2011. © 2010 Wiley‐Liss, Inc.     

An amperometric enzyme biosensor for real‐time measurements of cellobiohydrolase activity on insoluble cellulose

An amperometric enzyme biosensor for continuous detection of cellobiose has been implemented as an enzyme assay for cellulases. We show that the initial kinetics for cellobiohydrolase I, Cel7A from Trichoderma reesei, acting on different types of cellulose substrates, semi‐crystalline and amorphous, can be monitored directly and in real‐time by an enzyme‐modified electrode based on cellobiose dehydrogenase (CDH) from Phanerochaete chrysosporium (Pc). PcCDH was cross‐linked and immobilized on the surface of a carbon paste electrode which contained a mediator, benzoquinone. An oxidation current of the reduced mediator, hydroquinone, produced by the CDH‐catalyzed reaction with cellobiose, was recorded under constant‐potential amperometry at +0.5 V (vs. Ag/AgCl). The CDH‐biosensors showed high sensitivity (87.7 µA mM^?1 cm^?2), low detection limit (25 nM), and fast response time (t_95% ～ 3 s) and this provided experimental access to the transient kinetics of cellobiohydrolases acting on insoluble cellulose. The response from the CDH‐biosensor during enzymatic hydrolysis was corrected for the specificity of PcCDH for the β‐anomer of cello‐oligosaccharides and the approach were validated against HPLC. It is suggested that quantitative, real‐time data on pure insoluble cellulose substrates will be useful in attempts to probe the molecular mechanism underlying enzymatic hydrolysis of cellulose. Biotechnol. Bioeng. 2012; 109: 3199–3204. © 2012 Wiley Periodicals, Inc.     

Purification and biochemical characterization of feruloyl esterases from Aspergillus terreus MTCC 11096

Aspergillus terreus MTCC 11096 isolated from the soils of agricultural fields cultivating sweet sorghum was previously identified to produce feruloyl esterases (FAEs). The enzymes responsible for feruloyl esterase activity were purified to homogeneity and named as AtFAE‐1, AtFAE‐2, and AtFAE‐3. The enzymes were monomeric having molecular masses of 74, 23 and 36 kDa, respectively. Active protein bands were identified by a developed pH‐dependent zymogram on native PAGE. The three enzymes exhibited variation in pH tolerance ranging between pH 5–8 and thermostability of up to 55°C. Inhibition studies revealed that the serine residue was essential for feruloyl esterase activity; moreover aspartyl and glutamyl residues are not totally involved at the active site. Metal ions such as Ca²⁺, K⁺, and Mg²⁺ stabilized the enzyme activity for all three FAEs. Kinetic data indicated that all three enzymes showed catalytic efficiencies (k_cat/K_m) against different synthesized alkyl and aryl esters indicating their broad substrate specificity. The peptide mass fingerprinting by MALDI/TOF‐MS analysis and enzyme affinity toward methoxy and hydroxy substituents on the benzene ring revealed that the AtFAE‐1 belonged to type A while AtFAE‐2 and AtFAE‐3 were type C FAE. The FAEs could release 65 to 90% of ferulic acid from agrowaste substrates in the presence of xylanase. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:924–932, 2013