Homology dependence of targeted recombination at the Chinese hamster APRT locus.

Using simple linear fragments of the Chinese hamster adenine phosphoribosyltransferase (APRT) gene as targeting vectors, we have investigated the homology dependence of targeted recombination at the endogenous APRT locus in Chinese hamster ovary (CHO) cells. We have examined the effects of varying either the overall length of targeting sequence homology or the length of 5' or 3' flanking homology on both the frequency of targeted homologous recombination and the types of recombination events that are obtained. We find an exponential (logarithmic) relationship between length of APRT targeting homology and the frequency of targeted recombination at the CHO APRT locus, with the frequency of targeted recombination dependent upon both the overall length of targeting homology and the length of homology flanking each side of the target gene deletion. Although most of the APRT+ recombinants analyzed reflect simple targeted replacement or conversion of the target gene deletion, a significant fraction appear to have arisen by target gene-templated extension and correction of the targeting fragment sequences. APRT fragments with limited targeting homology flanking one side of the target gene deletion yield proportionately fewer target gene conversion events and proportionately more templated extension and vector correction events than do fragments with more substantial flanking homology.     

Parameters controlling the rate of gene targeting frequency in the protozoan parasite Leishmania.

In this study we investigated the role of several parameters governing the efficiency of gene targeting mediated by homologous recombination in the protozoan parasite Leishmania. We evaluated the relative targeting frequencies of different replacement vectors designed to target several sequences within the parasite genome. We found that a decrease in the length of homologous sequences <1 kb on one arm of the vector linearly influences the targeting frequency. No homologous recombination was detected, however, when the flanking homologous regions were <180 bp. A requirement for a very high degree of homology between donor and target sequences was found necessary for efficient gene targeting in Leishmania , as targeted recombination was strongly affected by base pair mismatches. Targeting frequency increased proportionally with copy number of the target only when the target was part of a linear amplicon, but remained unchanged when it was present on circles. Different chromosomal locations were found to be targeted with significantly variable levels of efficiency. Finally, different strains of the same species showed differences in gene targeting frequency. Overall, gene targeting mediated by homologous recombination in Leishmania shares similarities to both the yeast and the mammalian recombination systems.     

Gene replacement with one-sided homologous recombination.

Homologous recombination is now routinely used in mammalian cells to replace endogenous chromosomal sequences with transferred DNA. Vectors for this purpose are traditionally constructed so that the replacement segment is flanked on both sides by DNA sequences which are identical to sequences in the chromosomal target gene. To test the importance of bilateral regions of homology, we measured recombination between transferred and chromosomal immunoglobulin genes when the transferred segment was homologous to the chromosomal gene only on the 3' side. In each of the four recombinants analyzed, the 5' junction was unique, suggesting that it was formed by nonhomologous, i.e., random or illegitimate, recombination. In two of the recombinants, the 3' junction was apparently formed by homologous recombination, while in the other two recombinants, the 3' junction as well as the 5' junction might have involved a nonhomologous crossover. As reported previously, we found that the frequency of gene targeting increases monotonically with the length of the region of homology. Our results also indicate that targeting with fragments bearing one-sided homology can be as efficient as with fragments with bilateral homology, provided that the overall length of homology is comparable. The frequency of these events suggests that the immunoglobulin locus is particularly susceptible to nonhomologous recombination. Vectors designed for one-sided homologous recombination might be advantageous for some applications in genetic engineering.     

Effect of DNA sequence divergence on homologous recombination as analyzed by a random-walk model

A point connecting a pair of homologous regions of DNA duplexes moves along the homology in a reaction intermediate of the homologous recombination. Formulating this movement as a random walk, we were previously successful at explaining the dependence of the recombination frequency on the homology length. Recently, the dependence of the recombination frequency on the DNA sequence divergence in the homologous region was investigated experimentally; if the methyl-directed mismatch repair (MMR) system is active, the logarithm of the recombination frequency decreases very rapidly with an increase of the divergence in a low-divergence regime. Beyond this regime, the logarithm decreases slowly and linearly with the divergence. This "very rapid drop-off" is not observed when the MMR system is defective. In this article, we show that our random-walk model can explain these data in a straightforward way. When a connecting point encounters a diverged base pair, it is assumed to be destroyed with a probability that depends on the level of MMR activity.     

Parameters controlling the gene-targeting frequency at the Sphingomonas species rrn site and expression of the methyl parathion hydrolase gene

AIMS: To investigate the key parameters controlling the exogenous methyl parathion hydrolase (MPH) gene mpd-targeting frequency at the ribosomal RNA operon (rrn) site of Sphingomonas species which has a wide range of biotechnological applications. METHODS AND RESULTS: Targeting vectors with different homology lengths and recipient target DNA with different homology identities were used to investigate the parameters controlling the targeting frequency at the Sphingomonas species rrn site. Targeting frequency decreased with the reduction of homology length, and the minimal size for normal homologous recombination was >100 bp. Homologous recombination could succeed even if there were 3-4% mismatches; however, targeting frequency decreased with increasing sequence divergence. The Red recombination system could increase the targeting frequency to some extent. Targeting of the mpd gene to the rrn site did not affect cell viability and resulted in an increase of MPH-specific activity in recombinants. CONCLUSIONS: Targeting frequency was affected by homology length, identity and the Red recombination system. The rrn site is a good target site for the expression of exogenous genes. SIGNIFICANCE AND IMPACT OF THE STUDY: This work is useful as a foundation for a better understanding of recombination events involving homologous sequences and for the improved manipulation of Sphingomonas genes in biotechnological applications.     

The minimum amount of homology required for homologous recombination in mammalian cells.

Although DNA sequence homology is believed to be a prerequisite for homologous recombination events in procaryotes and eucaryotes, no systematic study has been done on the minimum amount of homology required for homologous recombination in mammalian cells. We have used simian virus 40-pBR322 hybrid plasmids constructed in vitro as substrates to quantitate intramolecular homologous recombination in cultured monkey cells. Excision of wild-type simian virus 40 DNA by homologous recombination was scored by the viral plaque assay. Using a series of plasmids containing 0 to 243 base pairs of homology, we have shown that the recombination frequency decreases as the homology is reduced, with the sharpest drop in recombination frequency occurring when the homology was reduced from 214 to 163 base pairs. However, low recombination frequencies were also observed with as little as 14 base pairs of homology.     

Parameters determining the efficiency of gene targeting in the moss Physcomitrella patens

In the moss Physcomitrella patens, transforming DNA containing homologous sequences integrates predominantly by homologous recombination with its genomic target. A systematic investigation of the parameters that determine gene targeting efficiency shows a direct relationship between homology length and targeting frequency for replacement vectors (a selectable marker flanked by homologous DNA). Overall homology of only 1 kb is sufficient to achieve a 50% yield of targeted transformants. Targeting may occur through homologous recombination in one arm, accompanied by non-homologous end-joining by the other arm of the vector, or by allele replacement following two homologous recombination events. Allele replacement frequency depends on the symmetry of the targeting vector, being proportional to the length of the shorter arm. Allele replacement may involve insertion of multiple copies of the transforming DNA, accompanied by ectopic insertions at non-homologous sites. Single-copy and single insertions at targeted loci (targeted gene replacements, ‘TGR’) occur with a frequency of 7–20% of all transformants when the minimum requirements for allele replacement are met. Homologous recombination in Physcomitrella is substantially more efficient than in any multicellular eukaryote, recommending it as the outstanding model for the study of homologous recombination in plants.     

Opposing roles for DNA structure-specific proteins Rad1, Msh2, Msh3, and Sgs1 in yeast gene targeting

Targeted gene replacement (TGR) in yeast and mammalian cells is initiated by the two free ends of the linear targeting molecule, which invade their respective homologous sequences in the chromosome, leading to replacement of the targeted locus with a selectable gene from the targeting DNA. To study the postinvasion steps in recombination, we examined the effects of DNA structure-specific proteins on TGR frequency and heteroduplex DNA formation. In strains deleted of RAD1, MSH2, or MSH3, we find that the frequency of TGR is reduced and the mechanism of TGR is altered while the reverse is true for deletion of SGS1, suggesting that Rad1 and Msh2:Msh3 facilitate TGR while Sgs1 opposes it. The altered mechanism of TGR in the absence of Msh2:Msh3 and Rad1 reveals a separate role for these proteins in suppressing an alternate gene replacement pathway in which incorporation of both homology regions from a single strand of targeting DNA into heteroduplex with the targeted locus creates a mismatch between the selectable gene on the targeting DNA and the targeted gene in the chromosome.     

Stochastic modelling of a single ion channel: interdependence of burst length and number of openings per burst

Previous modelling of single channel behaviour based on Markov processes has been concerned mainly with means and marginal distributions of particular quantities. The present study derives the joint distribution, conditional distributions, and associated mean values for the burst length (T) and the number (N) of openings per burst in two simple three-state models in which bursting is possible, one for an agonist-only and one for a channel blocking mechanism. In both models the conditional mean burst length (E(T/N = r)) increases linearly as a function of the number of openings per burst, while the conditional mean number of openings per burst (E(N/T = x)) is a nonlinear strictly increasing function of burst length, which is asymptotically linear for large burst length. The asymptotic intercept for each model is shown to be less than, equal to, or greater than unity according as mean channel closed-time is less than, equal to, or greater than mean open-time. For parameter values typical of the nicotinic receptor, this intercept is less than unity for the agonist-only model and greater than unity for the blocking model. As a result of the dependence between the number of openings per burst and burst length, it is shown that experimental estimates of the unconditional mean number of openings per burst may be biased if bursts of only short duration are collected.     

Asymmetric random walk in a reaction intermediate of homologous recombination

At an intermediate step of the homologous recombination between two double-stranded DNA molecules, a point (often called Holliday structure) connecting two strands coming from two recombining partners migrates along the homologous region. Assuming random walk of a connecting point, we previously explained the dependence of recombination frequency on the homology length observed in vivo. In this model, the random walk was assumed to be symmetric in that the forward transition rate equals the backward one. According to observations in vitro, however, catalysed migration appears unidirectional. Taking into account possible asymmetry, we thus reformulate our random walk model to reexamine the observations in vivo. We also derive some theoretical results to analyse dynamic processes observed in vitro.     

Insertion-Duplication Mutagenesis in Streptococcus pneumoniae: Targeting Fragment Length Is a Critical Parameter in Use as a Random Insertion Tool

To examine whether insertion-duplication mutagenesis with chimeric DNA as a transformation donor could be valuable as a gene knockout tool for genomic analysis in Streptococcus pneumoniae, we studied the transformation efficiency and targeting specificity of the process by using a nonreplicative vector with homologous targeting inserts of various sizes. Insertional recombination was very specific in targeting homologous sites. While the recombination rate did not depend on which site or region was targeted, it did depend strongly on the size of the targeting insert in the donor plasmid, in proportion to the fifth power of its length for inserts of 100 to 500 bp. The dependence of insertion-duplication events on the length of the targeting homology was quite different from that for linear allele replacement and places certain limits on the design of mutagenesis experiments. The number of independent pneumococcal targeting fragments of uniform size required to knock out any desired fraction of the genes in a model genome with a defined probability was calculated from these data by using a combinatorial theory with simplifying assumptions. The results show that efficient and thorough mutagenesis of a large part of the pneumococcal genome should be practical when using insertion-duplication mutagenesis.     

Multi-kilobase homozygous targeted gene replacement in human induced pluripotent stem cells

Sequence-specific nucleases such as TALEN and the CRISPR/Cas9 system have so far been used to disrupt, correct or insert transgenes at precise locations in mammalian genomes. We demonstrate efficient ‘knock-in’ targeted replacement of multi-kilobase genes in human induced pluripotent stem cells (iPSC). Using a model system replacing endogenous human genes with their mouse counterpart, we performed a comprehensive study of targeting vector design parameters for homologous recombination. A 2.7 kilobase (kb) homozygous gene replacement was achieved in up to 11% of iPSC without selection. The optimal homology arm length was around 2 kb, with homology length being especially critical on the arm not adjacent to the cut site. Homologous sequence inside the cut sites was detrimental to targeting efficiency, consistent with a synthesis-dependent strand annealing (SDSA) mechanism. Using two nuclease sites, we observed a high degree of gene excisions and inversions, which sometimes occurred more frequently than indel mutations. While homozygous deletions of 86 kb were achieved with up to 8% frequency, deletion frequencies were not solely a function of nuclease activity and deletion size. Our results analyzing the optimal parameters for targeting vector design will inform future gene targeting efforts involving multi-kilobase gene segments, particularly in human iPSC.     

Genetic stability of gene-targeted immunoglobulin loci. II. Influence of the cell line and the vector linearization site

The site-specific integration of exogenous gene fragments by homologous recombination provides a convenient method for altering the immunoglobulin loci of B cells and specifically designing antibody molecules. To introduce a human isotype into the heavy chain locus of mouse hybridoma cells we compared the recombination frequencies of vectors that could be linearized either as integration or as replacement constructs in different cell lines. Integration as well as replacement recombination was observed, irrespective of the location of the site at which the vector was cleaved. Integration events involving the human IgG1 vectors were lost at high frequency due to secondary vector excision, so that all stable recombinations were found to be replacement events. Replacement recombination of an integration vector involves an illegitimate crossover at least at the 3′ side and sometimes gives rise to deletion of the C_H1 domain. However, a homologous event at the 3′ side is more efficient than an illegitimate one, so that a homology that is distributed on both sides of the heterologous region promotes targeting at higher frequency than a contiguous sequence of the same total length. The position of the linearization site in the vector markedly influenced the targeting efficiency, but surprisingly, whether a double-strand break in the homology or in the heterology region more efficiently promoted integration was dependent on the cell line. In all cells, however, cleavage of the vector outside the homology region favoured stable replacements with a bias against C_H1-truncated clones. We further show that the frequency of replacements induced by integration vectors is not correlated to the homology length and cannot be increased by irradiation of the cells. Our findings indicate that for targeting the IgH locus other mechanisms might be involved than at other loci. Received: 20 January 1997 / Accepted: 9 June 1997     

Genetic stability of gene-targeted immunoglobulin loci. II. Influence of the cell line and the vector linearization site

The site-specific integration of exogenous gene fragments by homologous recombination provides a convenient method for altering the immunoglobulin loci of B cells and specifically designing antibody molecules. To introduce a human isotype into the heavy chain locus of mouse hybridoma cells we compared the recombination frequencies of vectors that could be linearized either as integration or as replacement constructs in different cell lines. Integration as well as replacement recombination was observed, irrespective of the location of the site at which the vector was cleaved. Integration events involving the human IgG1 vectors were lost at high frequency due to secondary vector excision, so that all stable recombinations were found to be replacement events. Replacement recombination of an integration vector involves an illegitimate crossover at least at the 3′ side and sometimes gives rise to deletion of the C_H1 domain. However, a homologous event at the 3′ side is more efficient than an illegitimate one, so that a homology that is distributed on both sides of the heterologous region promotes targeting at higher frequency than a contiguous sequence of the same total length. The position of the linearization site in the vector markedly influenced the targeting efficiency, but surprisingly, whether a double-strand break in the homology or in the heterology region more efficiently promoted integration was dependent on the cell line. In all cells, however, cleavage of the vector outside the homology region favoured stable replacements with a bias against C_H1-truncated clones. We further show that the frequency of replacements induced by integration vectors is not correlated to the homology length and cannot be increased by irradiation of the cells. Our findings indicate that for targeting the IgH locus other mechanisms might be involved than at other loci.     

Homologous Recombination in ESCHERICHIA COLI: Dependence on Substrate Length and Homology

We studied the in vivo recombination between homologous DNA sequences cloned in phage lambda and a pBR322-derived plasmid by assaying for the formation of phage-plasmid cointegrates by a single (or an odd number of) reciprocal exchange. (1) Recombination proceeds by the RecBC pathway in wild-type cells and by low levels of a RecF-dependent pathway in recBC- cells. The RecE pathway appears not to generate phage-plasmid cointegrates. (2) Recombination is linearly dependent on the length of the homologous sequences. In both RecBC and RecF-dependent pathways there is a minimal length, called the minimal efficient processing segment (MEPS), below which recombination becomes inefficient. The length of MEPS is between 23-27 base pairs (bp) and between 44-90 bp for the RecBC- and RecF-dependent pathways, respectively. A model, based on overlapping MEPS, of the correlation of genetic length with physical length is presented. The bases for the different MEPS length of the two pathways are discussed in relationship to the enzymes specific to each pathway. (3) The RecBC and the RecF-dependent pathways are each very sensitive to substrate homology. In wild-type E. coli, reduction of homology from 100% to 90% decreases recombinant frequency over 40-fold. The homology dependence of the RecBC and RecF-dependent pathways are similar. This suggests that a component common to both, probably recA, is responsible for the recognition of homology.     

The length of homology required for gene targeting in embryonic stem cells.

Homologous recombination has been used to introduce site-specific mutations into murine embryonic stem (ES) cells with both insertion and replacement vectors. In this study, we compared the frequency of gene targeting with various lengths of homology and found a dramatic increase in targeting with an increase in homology from 1.3 to 6.8 kb. We examined in detail the relationship between the length of homology and the gene-targeting frequency for replacement vectors and found that a critical length of homology is needed for targeting. Adding greater lengths of homology to this critical length has less of an effect on the targeting frequency. We also analyzed the lengths of homology necessary on both arms of the vector for gene replacement events and found that 472 bp of homology is used as efficiently as 1.2 kb in the formation and resolution of crossover junctions.     

I-SceI-Induced Gene Replacement at a Natural Locus in Embryonic Stem Cells

Gene targeting is a very powerful tool for studying mammalian development and physiology and for creating models of human diseases. In many instances, however, it is desirable to study different modifications of a target gene, but this is limited by the generally low frequency of homologous recombination in mammalian cells. We have developed a novel gene-targeting strategy in mouse embryonic stem cells that is based on the induction of endogenous gap repair processes at a defined location within the genome by induction of a double-strand break (DSB) in the gene to be mutated. This strategy was used to knock in an NH₂-ezrin mutant in the villin gene, which encodes an actin-binding protein expressed in the brush border of the intestine and the kidney. To induce the DSB, an I-SceI yeast meganuclease restriction site was first introduced by gene targeting to the villin gene, followed by transient expression of I-SceI. The repair of the ensuing DSB was achieved with high efficiency (6 × 10⁻⁶) by a repair shuttle vector sharing only a 2.8-kb region of homology with the villin gene and no negative selection marker. Compared to conventional gene-targeting experiments at the villin locus, this represents a 100-fold stimulation of gene-targeting frequency, notwithstanding a much lower length of homology. This strategy will be very helpful in facilitating the targeted introduction of several types of mutations within a gene of interest.     

Intermolecular recombination assay for mammalian cells that produces recombinants carrying both homologous and nonhomologous junctions.

We present an intermolecular recombination assay for mammalian cells that does not involve the reconstitution of a selectable marker. It is based on the generation of a shuttle vector by recombination between a bacterial and a mammalian vector. The recombinants can thus be amplified in mammalian cells, isolated by plasmid rescue in an Escherichia coli RecA- host, and identified by in situ hybridization, by using mammalian vector sequences as probes. Since both parental molecules can share defined lengths of homology, this assay permits a direct comparison between homologous and nonhomologous intermolecular recombination. Our results indicate that the dominant intermolecular recombination mechanism is a nonhomologous one. The relative frequency of homologous to nonhomologous recombination was influenced by the length of shared homology between parental molecules and the replicative state of the parental molecules, but not by the introduction of double-strand breaks per se. Finally, almost all of the recombinants with a homologous junction did not have the reciprocal homologous junction but instead had a nonhomologous one. We propose a model to account for the generation of these recombinants.     

Intermolecular homologous recombination in plants.

To study DNA topological requirements for homologous recombination in plants, we have constructed pairs of plasmids that contain nonoverlapping deletions in the neomycin phosphotransferase gene [APH(3')II], which, when intact, confers kanamycin resistance to plant cells. Protoplasts isolated from Nicotiana tabacum were cotransformed with complementary pairs of plasmids containing these truncated gene constructs. Homologous recombination or gene conversion within the homologous sequences (6 to 405 base pairs) of the protein-coding region of the truncated genes led to the restoration of the functional APH(3')II gene, rendering these cells resistant to kanamycin. Circular plasmid DNAs recombined very inefficiently, independent of the length of the homologous region. A double-strand break in one molecule only slightly increased the recombination frequency. The most favorable substrates for recombination were linear molecules. In this case, the recombination frequency was positively correlated with the length of the homologous regions. The recombination frequency of plasmids linearized at sites proximal to the deletion-homology junction was significantly higher than when linearization was distal to the homologous region. Vector homology within cotransformed plasmid sequences also increased the recombination frequency.     

Theoretical analysis of DNA branch migration in the presence of a slow reversible initiation step

Branched DNA structures include several DNA regions connected by three- or four-way DNA junctions. Branched DNAs can be intermediates in DNA replication and recombination in living organisms and in sequence-specific DNA targeting in vitro. Branched DNA structures are usually metastable and irreversibly dissociate to non-branched products via a DNA strand exchange process commonly known as DNA branch migration. The key parameter in the DNA dissociation process is its characteristic time, which depends on the length of the dissociating DNA structure. Here, we predict that the presence of a slow reversible initiation step, which precedes DNA branch migration, can alter, to almost linear dependence, the "classic" quadratic dependence of the dissociation time on the length of the dissociating DNA structure. This prediction can be applied to dissociation of Y-like DNA structures and double D-loop DNA hybrids, which are DNA structures similar to replication bubbles. In addition, the slow initiation step can increase the effect of DNA sequence heterologies within the structure on its kinetic stability. Applications of our analysis for genetic manipulations with branched DNA structures are discussed.