Identification of plant architecture and yield-related QTL in <Emphasis Type="Italic">Vicia faba</Emphasis> L.

Low and unstable yields across seasons and environments are among the main reasons which make profitability for farmers too low. Along with resistance/tolerance to biotic and abiotic stresses, plant architecture and yield-related traits are the main determinants of yield stability. The current study was conducted to identify and validate quantitative trait loci (QTL) for plant architecture and yield-related traits in faba bean; our results provide novel information about the genetics of plant architecture traits in this crop. An equina × paucijuga recombinant inbred line population was derived and submitted to field experiments at Córdoba (Spain) over a period of four seasons. Stable QTL were identified for eight of the traits evaluated. QTL clusters were identified on almost each chromosome. The high inter-trait correlations between some of the traits controlled by a cluster of QTL might reflect either a set of closely linked loci or, more likely, pleiotropic effects. The stability of many of these major QTL in different years offers the possibility of exploiting them via marker-assisted selection. Further fine mapping of these target regions will help to identify potential candidate genes using synteny.     

Small- and Large-Effect Quantitative Trait Locus Interactions Underlie Variation in Yeast Sporulation Efficiency

Quantitative trait loci (QTL) with small effects on phenotypic variation can be difficult to detect and analyze. Because of this a large fraction of the genetic architecture of many complex traits is not well understood. Here we use sporulation efficiency in Saccharomyces cerevisiae as a model complex trait to identify and study small-effect QTL. In crosses where the large-effect quantitative trait nucleotides (QTN) have been genetically fixed we identify small-effect QTL that explain approximately half of the remaining variation not explained by the major effects. We find that small-effect QTL are often physically linked to large-effect QTL and that there are extensive genetic interactions between small- and large-effect QTL. A more complete understanding of quantitative traits will require a better understanding of the numbers, effect sizes, and genetic interactions of small-effect QTL.     

Genetic mapping of quantitative phenotypic traits in Saccharomyces cerevisiae

Saccharomyces cerevisiae has become a favorite production organism in industrial biotechnology presenting new challenges to yeast engineers in terms of introducing advantageous traits such as stress tolerances. Exploring subspecies diversity of S. cerevisiae has identified strains that bear industrially relevant phenotypic traits. Provided that the genetic basis of such phenotypic traits can be identified inverse engineering allows the targeted modification of production strains. Most phenotypic traits of interest in S. cerevisiae strains are quantitative, meaning that they are controlled by multiple genetic loci referred to as quantitative trait loci (QTL). A straightforward approach to identify the genetic basis of quantitative traits is QTL mapping which aims at the allocation of the genetic determinants to regions in the genome. The application of high-density oligonucleotide arrays and whole-genome re-sequencing to detect genetic variations between strains has facilitated the detection of large numbers of molecular markers thus allowing high-resolution QTL mapping over the entire genome. This review focuses on the basic principle and state of the art of QTL mapping in S. cerevisiae. Furthermore we discuss several approaches developed during the last decade that allow down-scaling of the regions identified by QTL mapping to the gene level. We also emphasize the particular challenges of QTL mapping in nonlaboratory strains of S. cerevisiae.     

QTL Analysis of High Thermotolerance with Superior and Downgraded Parental Yeast Strains Reveals New Minor QTLs and Converges on Novel Causative Alleles Involved in RNA Processing

Revealing QTLs with a minor effect in complex traits remains difficult. Initial strategies had limited success because of interference by major QTLs and epistasis. New strategies focused on eliminating major QTLs in subsequent mapping experiments. Since genetic analysis of superior segregants from natural diploid strains usually also reveals QTLs linked to the inferior parent, we have extended this strategy for minor QTL identification by eliminating QTLs in both parent strains and repeating the QTL mapping with pooled-segregant whole-genome sequence analysis. We first mapped multiple QTLs responsible for high thermotolerance in a natural yeast strain, MUCL28177, compared to the laboratory strain, BY4742. Using single and bulk reciprocal hemizygosity analysis we identified MKT1 and PRP42 as causative genes in QTLs linked to the superior and inferior parent, respectively. We subsequently downgraded both parents by replacing their superior allele with the inferior allele of the other parent. QTL mapping using pooled-segregant whole-genome sequence analysis with the segregants from the cross of the downgraded parents, revealed several new QTLs. We validated the two most-strongly linked new QTLs by identifying NCS2 and SMD2 as causative genes linked to the superior downgraded parent and we found an allele-specific epistatic interaction between PRP42 and SMD2. Interestingly, the related function of PRP42 and SMD2 suggests an important role for RNA processing in high thermotolerance and underscores the relevance of analyzing minor QTLs. Our results show that identification of minor QTLs involved in complex traits can be successfully accomplished by crossing parent strains that have both been downgraded for a single QTL. This novel approach has the advantage of maintaining all relevant genetic diversity as well as enough phenotypic difference between the parent strains for the trait-of-interest and thus maximizes the chances of successfully identifying additional minor QTLs that are relevant for the phenotypic difference between the original parents.     

Deciphering the genomic architecture of the stickleback brain with a novel multilocus gene‐mapping approach

Quantitative traits important to organismal function and fitness, such as brain size, are presumably controlled by many small‐effect loci. Deciphering the genetic architecture of such traits with traditional quantitative trait locus (QTL) mapping methods is challenging. Here, we investigated the genetic architecture of brain size (and the size of five different brain parts) in nine‐spined sticklebacks (Pungitius pungitius) with the aid of novel multilocus QTL‐mapping approaches based on a de‐biased LASSO method. Apart from having more statistical power to detect QTL and reduced rate of false positives than conventional QTL‐mapping approaches, the developed methods can handle large marker panels and provide estimates of genomic heritability. Single‐locus analyses of an F₂ interpopulation cross with 239 individuals and 15 198, fully informative single nucleotide polymorphisms (SNPs) uncovered 79 QTL associated with variation in stickleback brain size traits. Many of these loci were in strong linkage disequilibrium (LD) with each other, and consequently, a multilocus mapping of individual SNPs, accounting for LD structure in the data, recovered only four significant QTL. However, a multilocus mapping of SNPs grouped by linkage group (LG) identified 14 LGs (1–6 depending on the trait) that influence variation in brain traits. For instance, 17.6% of the variation in relative brain size was explainable by cumulative effects of SNPs distributed over six LGs, whereas 42% of the variation was accounted for by all 21 LGs. Hence, the results suggest that variation in stickleback brain traits is influenced by many small‐effect loci. Apart from suggesting moderately heritable (h² ≈ 0.15–0.42) multifactorial genetic architecture of brain traits, the results highlight the challenges in identifying the loci contributing to variation in quantitative traits. Nevertheless, the results demonstrate that the novel QTL‐mapping approach developed here has distinctive advantages over the traditional QTL‐mapping methods in analyses of dense marker panels.     

Quantitative trait loci associated with seed and seedling traits in Lactuca

Seed and seedling traits related to germination and stand establishment are important in the production of cultivated lettuce (Lactuca sativa L.). Six seed and seedling traits segregating in a L. sativa cv. Salinas x L. serriola recombinant inbred line population consisting of 103 F8 families revealed a total of 17 significant quantitative trait loci (QTL) resulting from three seed production environments. Significant QTL were identified for germination in darkness, germination at 25 and 35°C, median maximum temperature of germination, hypocotyl length at 72 h post-imbibition, and plant (seedling) quality. Some QTL for germination and early seedling growth characteristics were co-located, suggestive of pleiotropic loci regulating these traits. A single QTL (Htg6.1) described 25 and 23% of the total phenotypic variation for high temperature germination in California- and Netherlands-grown populations, respectively, and was significant between 33 and 37°C. Additionally, Htg6.1 showed significant epistatic interactions with other Htg QTL and a consistent effect across all the three seed production environments. L. serriola alleles increased germination at these QTL. The estimate of narrow-sense heritability (h²) of Htg6.1 was 0.84, indicating potential for L. serriola as a source of germination thermotolerance for lettuce introgression programs.     

Identification and dissection of a complex DNA repair sensitivity phenotype in Baker's yeast

Complex traits typically involve the contribution of multiple gene variants. In this study, we took advantage of a high-density genotyping analysis of the BY (S288c) and RM strains of Saccharomyces cerevisiae and of 123 derived spore progeny to identify the genetic loci that underlie a complex DNA repair sensitivity phenotype. This was accomplished by screening hybrid yeast progeny for sensitivity to a variety of DNA damaging agents. Both the BY and RM strains are resistant to the ultraviolet light–mimetic agent 4-nitroquinoline 1-oxide (4-NQO); however, hybrid progeny from a BY×RM cross displayed varying sensitivities to the drug. We mapped a major quantitative trait locus (QTL), RAD5, and identified the exact polymorphism within this locus responsible for 4-NQO sensitivity. By using a backcrossing strategy along with array-assisted bulk segregant analysis, we identified one other locus, MKT1, and a QTL on Chromosome VII that also link to the hybrid 4-NQO–sensitive phenotype but confer more minor effects. This work suggests an additive model for sensitivity to 4-NQO and provides a strategy for mapping both major and minor QTL that confer background-specific phenotypes. It also provides tools for understanding the effect of genetic background on sensitivity to genotoxic agents.     

QTL mapping and the genetic basis of adaptation: recent developments

Quantitative trait loci (QTL) mapping has been used in a number of evolutionary studies to study the genetic basis of adaptation by mapping individual QTL that explain the differences between differentiated populations and also estimating their effects and interaction in the mapping population. This analysis can provide clues about the evolutionary history of populations and causes of the population differentiation. QTL mapping analysis methods and associated computer programs provide us tools for such an inference on the genetic basis and architecture of quantitative trait variation in a mapping population. Current methods have the capability to separate and localize multiple QTL and estimate their effects and interaction on a quantitative trait. More recent methods have been targeted to provide a comprehensive inference on the overall genetic architecture of multiple traits in a number of environments. This development is important for evolutionary studies on the genetic basis of multiple trait variation, genotype by environment interaction, host–parasite interaction, and also microarray gene expression QTL analysis.     

Genetic mapping of QTLs controlling vegetative propagation in Eucalyptus grandis and E. urophylla using a pseudo-testcross strategy and RAPD markers

We have extended the combined use of the “pseudo-testcross” mapping strategy and RAPD markers to map quantitative trait loci (QTLs) controlling traits related to vegetative propagation in Eucalyptus. QTL analyses were performed using two different interval mapping approaches, MAPMAKER-QTL (maximum likelihood) and QTL-STAT (non-linear least squares). A total of ten QTLs were detected for micropropagation response (measured as fresh weight of shoots, FWS), six for stump sprouting ability (measured as # stump sprout cuttings, #Cutt) and four for rooting ability (measured as % rooting of cuttings, %Root). With the exception of three QTLs, both interval-mapping methods yielded similar results in terms of QTL detection. Discrepancies in the most likely QTL location were observed between the two methods. In 75% of the cases the most likely position was in the same, or in an adjacent, interval. Standardized gene substitution effects for the QTLs detected were typically between 0.46 and 2.1 phenotypic standard deviations (σ_p), while differences between the family mean and the favorable QTL genotype were between 0.25 and 1.07 (σ_p). Multipoint estimates of the total genetic variation explained by the QTLs (89.0% for FWS, 67.1 % for#Cutt, 62.7% for %Root) indicate that a large proportion of the variation in these traits is controlled by a relatively small number of major-effect QTLs. In this cross, E. grandis is responsible for most of the inherited variation in the ability to form shoots, while E. urophylla contributes most of the ability in rooting. QTL mapping in the pseudo-testcross configuration relies on withinfamily linkage disequilibrium to establish marker/trait associations. With this approach QTL analysis is possible in any available full-sib family generated from undomesticated and highly heterozygous organisms such as forest trees. QTL mapping on two-generation pedigrees opens the possibility of using already existing families in retrospective QTL analyses to gather the quantitative data necessary for marker-assisted tree breeding.     

Do large effect QTL fractionate? A case study at the maize domestication QTL teosinte branched1

Quantitative trait loci (QTL) mapping is a valuable tool for studying the genetic architecture of trait variation. Despite the large number of QTL studies reported in the literature, the identified QTL are rarely mapped to the underlying genes and it is usually unclear whether a QTL corresponds to one or multiple linked genes. Similarly, when QTL for several traits colocalize, it is usually unclear whether this is due to the pleiotropic action of a single gene or multiple linked genes, each affecting one trait. The domestication gene teosinte branched1 (tb1) was previously identified as a major domestication QTL with large effects on the differences in plant and ear architecture between maize and teosinte. Here we present the results of two experiments that were performed to determine whether the single gene tb1 explains all trait variation for its genomic region or whether the domestication QTL at tb1 fractionates into multiple linked QTL. For traits measuring plant architecture, we detected only one QTL per trait and these QTL all mapped to tb1. These results indicate that tb1 is the sole gene for plant architecture traits that segregates in our QTL mapping populations. For most traits related to ear morphology, we detected multiple QTL per trait in the tb1 genomic region, including a large effect QTL at tb1 itself plus one or two additional linked QTL. tb1 is epistatic to two of these additional QTL for ear traits. Overall, these results provide examples for both a major QTL that maps to a single gene, as well as a case in which a QTL fractionates into multiple linked QTL.     

QTL mapping and epistasis analysis of brace root traits in maize

Root architecture is a major factor influencing root lodging, which limits greater yield stability at high planting density. Total brace root tier number (TBRTN) and effective brace root tier number (EBRTN) are the two most important root architecture traits influencing root lodging. However, the genetic mechanisms that underlie these traits remain poorly understood. In this study, quantitative trait loci (QTL) for TBRTN and EBRTN were mapped using a set of 201 recombinant inbred lines (RILs) and 278 immortalized F2 (IF2) populations derived from these RILs, which were evaluated in three environments. Ten QTL in the RILs and 15 QTL in the IF2 population were detected. In the two populations, we identified two coincident major QTL for TBRTN and a single identical major QTL for EBRTN. The QTL for TBRTN showed the largest additive effect, accounting for 16.36 and 17.88% of the phenotypic variance in the RILs and IF2 population, respectively. Additional epistatic effects were identified for all the maize chromosomes, except for chromosome 4. Most epistatic effects involved pairs of loci that were on different chromosomes. At the same time, we found loci that interacted simultaneously with several other loci to affect expression of the traits, which was particularly evident in the IF2 population. For example, qTAR1-2 interacted simultaneously with qTAR2-1, qTAR3-1, qTAR5-1, and qITAR8-2 to affect the expression of TBRTN. Therefore, a complex network controlling the traits was found in maize. These results provide useful information for understanding the molecular mechanisms controlling root architecture.     

Six new recombinant inbred populations for the study of quantitative traits in Arabidopsis thaliana

Quantitative approaches are now widely used to study the genetic architecture of complex traits. However, most studies have been conducted in single mapping populations, which sample only a fraction of the natural allelic variation available within a gene pool and can identify only a subset of the loci controlling the traits. To enable the progress towards an understanding of the global genetic architecture of a broad range of complex traits, we have developed and characterised six new Arabidopsis thaliana recombinant inbred populations. To evaluate the utility of these populations for integrating analyses from multiple populations, we identified quantitative trait loci (QTL) controlling flowering time in vernalized plants growing in 16 h days. We used the physical positions of markers to align the linkage maps of our populations with those of six existing populations. We identified seven QTL in genomic locations coinciding with those identified in previous studies and in addition a further eight QTL were identified. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at     

Molecular Dissection of a Genomic Region Governing Root Traits Associated with Drought Tolerance Employing a Combinatorial Approach of QTL Mapping and RNA-seq in Rice

Drought is considered as one of the major obstacles for progressive yield enhancement and stability in rice, especially in rain-fed conditions. Being a complex trait, drought is regulated by numerous quantitative trait loci (QTL), of which, however, very few underlying genes have been cloned. In the present investigation, we made an attempt to uncover the candidate gene(s) behind a major QTL, rdw8.1 governing drought tolerance traits viz., root dry weight and root length. The targeted QTL has been delimited to 366.75 kb from 10.17 Mb by QTL mapping in BC₁F₂ population. Further, the targeted region was delineated employing next-generation sequencing based RNA-seq. Based on the QTL mapping and RNA-seq approaches, the plausible candidate gene underlying the QTL region was identified as a wound inducible protein (LOC_Os08g08090). This gene can be of potential value to enhance the drought tolerance of the elite rice varieties through molecular breeding.     

Quantitative trait loci controlling agronomic and biochemical traits in Cannabis sativa

Understanding the genetic basis of complex traits is a fundamental goal of evolutionary genetics. Yet, the genetics controlling complex traits in many important species such as hemp (Cannabis sativa) remain poorly investigated. Because hemp’s change in legal status with the 2014 and 2018 U.S. Federal Farm Bills, interest in the genetics controlling its numerous agriculturally important traits has steadily increased. To better understand the genetics of agriculturally important traits in hemp, we developed an F₂ population by crossing two phenotypically distinct hemp cultivars (Carmagnola and USO31). Using whole-genome sequencing, we mapped quantitative trait loci (QTL) associated with variation in numerous agronomic and biochemical traits. A total of 69 loci associated with agronomic (34) and biochemical (35) trait variation were identified. We found that most QTL co-localized, suggesting that the phenotypic distinctions between Carmagnola and USO31 are largely controlled by a small number of loci. We identified TINY and olivetol synthase as candidate genes underlying co-localized QTL clusters for agronomic and biochemical traits, respectively. We functionally validated the olivetol synthase candidate by expressing the alleles in yeast. Gas chromatography-mass spectrometry assays of extracts from these yeast colonies suggest that the USO31 olivetol synthase is functionally less active and potentially explains why USO31 produces lower cannabinoids compared to Carmagnola. Overall, our results help modernize the genomic understanding of complex traits in hemp.     

Genetic Basis of Haloperidol Resistance in Saccharomyces cerevisiae Is Complex and Dose Dependent

The genetic basis of most heritable traits is complex. Inhibitory compounds and their effects in model organisms have been used in many studies to gain insights into the genetic architecture underlying quantitative traits. However, the differential effect of compound concentration has not been studied in detail. In this study, we used a large segregant panel from a cross between two genetically divergent yeast strains, BY4724 (a laboratory strain) and RM11_1a (a vineyard strain), to study the genetic basis of variation in response to different doses of a drug. Linkage analysis revealed that the genetic architecture of resistance to the small-molecule therapeutic drug haloperidol is highly dose-dependent. Some of the loci identified had effects only at low doses of haloperidol, while other loci had effects primarily at higher concentrations of the drug. We show that a major QTL affecting resistance across all concentrations of haloperidol is caused by polymorphisms in SWH1, a homologue of human oxysterol binding protein. We identify a complex set of interactions among the alleles of the genes SWH1, MKT1, and IRA2 that are most pronounced at a haloperidol dose of 200 µM and are only observed when the remainder of the genome is of the RM background. Our results provide further insight into the genetic basis of drug resistance.     

Novel linkage mapping approach using DNA pooling in human and animal genetics. II. Detection of quantitative traits loci in dairy cattle

Selective DNA pooling is an advanced methodology for linkage mapping of quantitative trait loci (QTL) in farm animals. The principle is based on densitometric estimates of marker allele frequency in pooled DNA samples of phenotypically extreme individuals from half-sib, backcross and F(2) experimental designs in farm animals. This methodology provides a rapid and efficient analysis of a large number of individuals with short tandem repeat markers that are essential to detect QTL through the genome - wide searching approach. Several strategies involving whole genome scanning with a high statistical power have been developed for systematic search to detect the quantitative traits loci and linked loci of complex traits. In recent studies, greater success has been achieved in mapping several QTLs in Israel-Holstein cattle using selective DNA pooling. This paper outlines the currently emerged novel strategies of linkage mapping to identify QTL based on selective DNA pooling with more emphasis on its theoretical pre-requisite to detect linked QTLs, applications, a general theory for experimental half-sib designs, the power of statistics and its feasibility to identify genetic markers linked QTL in dairy cattle. The study reveals that the application of selective DNA pooling in dairy cattle can be best exploited in the genome-wide detection of linked loci with small and large QTL effects and applied to a moderately sized half-sib family of about 500 animals.     

Incorporating pleiotropic quantitative trait loci in dissection of complex traits: seed yield in rapeseed as an example

Key message

A comprehensive linkage atlas for seed yield in rapeseed.

Abstract

Most agronomic traits of interest for crop improvement (including seed yield) are highly complex quantitative traits controlled by numerous genetic loci, which brings challenges for comprehensively capturing associated markers/genes. We propose that multiple trait interactions underlie complex traits such as seed yield, and that considering these component traits and their interactions can dissect individual quantitative trait loci (QTL) effects more effectively and improve yield predictions. Using a segregating rapeseed (Brassica napus) population, we analyzed a large set of trait data generated in 19 independent experiments to investigate correlations between seed yield and other complex traits, and further identified QTL in this population with a SNP-based genetic bin map. A total of 1904 consensus QTL accounting for 22 traits, including 80 QTL directly affecting seed yield, were anchored to the B. napus reference sequence. Through trait association analysis and QTL meta-analysis, we identified a total of 525 indivisible QTL that either directly or indirectly contributed to seed yield, of which 295 QTL were detected across multiple environments. A majority (81.5%) of the 525 QTL were pleiotropic. By considering associations between traits, we identified 25 yield-related QTL previously ignored due to contrasting genetic effects, as well as 31 QTL with minor complementary effects. Implementation of the 525 QTL in genomic prediction models improved seed yield prediction accuracy. Dissecting the genetic and phenotypic interrelationships underlying complex quantitative traits using this method will provide valuable insights for genomics-based crop improvement.

     

Methodologies for segregation analysis and QTL mapping in plants

Most characters of biological interest and economic importance are quantitative traits. To uncover the genetic architecture of quantitative traits, two approaches have become popular in China. One is the establishment of an analytical model for mixed major-gene plus polygenes inheritance and the other the discovery of quantitative trait locus (QTL). Here we review our progress employing these two approaches. First, we proposed joint segregation analysis of multiple generations for mixed major-gene plus polygenes inheritance. Second, we extended the multilocus method of Lander and Green (1987), Jiang and Zeng (1997) to a more generalized approach. Our methodology handles distorted, dominant and missing markers, including the effect of linked segregation distortion loci on the estimation of map distance. Finally, we developed several QTL mapping methods. In the Bayesian shrinkage estimation (BSE) method, we suggested a method to test the significance of QTL effects and studied the effect of the prior distribution of the variance of QTL effect on QTL mapping. To reduce running time, a penalized maximum likelihood method was adopted. To mine novel genes in crop inbred lines generated in the course of normal crop breeding work, three methods were introduced. If a well-documented genealogical history of the lines is available, two-stage variance component analysis and multi-QTL Haseman-Elston regression were suggested; if unavailable, multiple loci in silico mapping was proposed.     

Fine‐mapping of Obesity‐related Quantitative Trait Loci in an F9/10 Advanced Intercross Line

Obesity develops in response to a combination of environmental effects and multiple genes of small effect. Although there has been significant progress in characterizing genes in many pathways contributing to metabolic disease, knowledge about the relationships of these genes to each other and their joint effects upon obesity lags behind. The LG,SM advanced intercross line (AIL) model of obesity has been used to characterize over 70 loci involved in fatpad weight, body weight, and organ weights. Each of these quantitative trait loci (QTLs) encompasses large regions of the genome and require fine‐mapping to isolate causative sequence changes and possible mechanisms of action as indicated by the genetic architecture. In this study we fine‐map QTLs first identified in the F₂ and F_2/3 populations in the combined F_9/10 advanced intercross generations. We observed significantly narrowed QTL confidence regions, identified many single QTL that resolve into multiple QTL peaks, and identified new QTLs that may have been previously masked due to opposite gene effects at closely linked loci. We also present further characterization of the pleiotropic and epistatic interactions underlying these obesity‐related traits.