BAC-Pool Sequencing and Analysis of Large Segments of A12 and D12 Homoeologous Chromosomes in Upland Cotton

Although new and emerging next-generation sequencing (NGS) technologies have reduced sequencing costs significantly, much work remains to implement them for de novo sequencing of complex and highly repetitive genomes such as the tetraploid genome of Upland cotton (Gossypium hirsutum L.). Herein we report the results from implementing a novel, hybrid Sanger/454-based BAC-pool sequencing strategy using minimum tiling path (MTP) BACs from Ctg-3301 and Ctg-465, two large genomic segments in A12 and D12 homoeologous chromosomes (Ctg). To enable generation of longer contig sequences in assembly, we implemented a hybrid assembly method to process ~35x data from 454 technology and 2.8-3x data from Sanger method. Hybrid assemblies offered higher sequence coverage and better sequence assemblies. Homology studies revealed the presence of retrotransposon regions like Copia and Gypsy elements in these contigs and also helped in identifying new genomic SSRs. Unigenes were anchored to the sequences in Ctg-3301 and Ctg-465 to support the physical map. Gene density, gene structure and protein sequence information derived from protein prediction programs were used to obtain the functional annotation of these genes. Comparative analysis of both contigs with Arabidopsis genome exhibited synteny and microcollinearity with a conserved gene order in both genomes. This study provides insight about use of MTP-based BAC-pool sequencing approach for sequencing complex polyploid genomes with limited constraints in generating better sequence assemblies to build reference scaffold sequences. Combining the utilities of MTP-based BAC-pool sequencing with current longer and short read NGS technologies in multiplexed format would provide a new direction to cost-effectively and precisely sequence complex plant genomes.     

Rapid hybrid de novo assembly of a microbial genome using only short reads: Corynebacterium pseudotuberculosis I19 as a case study

Due to the advent of the so-called Next-Generation Sequencing (NGS) technologies the amount of monetary and temporal resources for whole-genome sequencing has been reduced by several orders of magnitude. Sequence reads can be assembled either by anchoring them directly onto an available reference genome (classical reference assembly), or can be concatenated by overlap (de novo assembly). The latter strategy is preferable because it tends to maintain the architecture of the genome sequence the however, depending on the NGS platform used, the shortness of read lengths cause tremendous problems the in the subsequent genome assembly phase, impeding closing of the entire genome sequence. To address the problem, we developed a multi-pronged hybrid de novo strategy combining De Bruijn graph and Overlap-Layout-Consensus methods, which was used to assemble from short reads the entire genome of Corynebacterium pseudotuberculosis strain I19, a bacterium with immense importance in veterinary medicine that causes Caseous Lymphadenitis in ruminants, principally ovines and caprines. Briefly, contigs were assembled de novo from the short reads and were only oriented using a reference genome by anchoring. Remaining gaps were closed using iterative anchoring of short reads by craning to gap flanks. Finally, we compare the genome sequence assembled using our hybrid strategy to a classical reference assembly using the same data as input and show that with the availability of a reference genome, it pays off to use the hybrid de novo strategy, rather than a classical reference assembly, because more genome sequences are preserved using the former.     

Directed sequencing and annotation of three Dicentrarchus labrax L. chromosomes by applying Sanger- and pyrosequencing technologies on pooled DNA of comparatively mapped BAC clones

Dicentrarchus labrax is one of the major marine aquaculture species in the European Union. In this study, we have developed a directed-sequencing strategy to sequence three sea bass chromosomes and compared results with other teleosts.Three BAC DNA pools were created from sea bass BAC clones that mapped to stickleback chromosomes/groups V, XVII and XXI. The pools were sequenced to 17-39x coverage by pyrosequencing. Data assembly was supported by Sanger reads and mate pair data and resulted in superscaffolds of 13.2 Mb, 17.5 Mb and 13.7 Mb respectively. Annotation features of the superscaffolds include 1477 genes. We analyzed size change of exon, intron and intergenic sequence between teleost species and deduced a simple model for the evolution of genome composition in teleost lineage.Combination of second generation sequencing technologies, Sanger sequencing and genome partitioning strategies allows “high-quality draft assemblies” of chromosome-sized superscaffolds, which are crucial for the prediction and annotation of complete genes.     

An Integrated Pipeline for de Novo Assembly of Microbial Genomes

Remarkable advances in DNA sequencing technology have created a need for de novo genome assembly methods tailored to work with the new sequencing data types. Many such methods have been published in recent years, but assembling raw sequence data to obtain a draft genome has remained a complex, multi-step process, involving several stages of sequence data cleaning, error correction, assembly, and quality control. Successful application of these steps usually requires intimate knowledge of a diverse set of algorithms and software. We present an assembly pipeline called A5 (Andrew And Aaron''s Awesome Assembly pipeline) that simplifies the entire genome assembly process by automating these stages, by integrating several previously published algorithms with new algorithms for quality control and automated assembly parameter selection. We demonstrate that A5 can produce assemblies of quality comparable to a leading assembly algorithm, SOAPdenovo, without any prior knowledge of the particular genome being assembled and without the extensive parameter tuning required by the other assembly algorithm. In particular, the assemblies produced by A5 exhibit 50% or more reduction in broken protein coding sequences relative to SOAPdenovo assemblies. The A5 pipeline can also assemble Illumina sequence data from libraries constructed by the Nextera (transposon-catalyzed) protocol, which have markedly different characteristics to mechanically sheared libraries. Finally, A5 has modest compute requirements, and can assemble a typical bacterial genome on current desktop or laptop computer hardware in under two hours, depending on depth of coverage.     

Long-read sequence assembly: a technical evaluation in barley

Sequence assembly of large and repeat-rich plant genomes has been challenging, requiring substantial computational resources and often several complementary sequence assembly and genome mapping approaches. The recent development of fast and accurate long-read sequencing by circular consensus sequencing (CCS) on the PacBio platform may greatly increase the scope of plant pan-genome projects. Here, we compare current long-read sequencing platforms regarding their ability to rapidly generate contiguous sequence assemblies in pan-genome studies of barley (Hordeum vulgare). Most long-read assemblies are clearly superior to the current barley reference sequence based on short-reads. Assemblies derived from accurate long reads excel in most metrics, but the CCS approach was the most cost-effective strategy for assembling tens of barley genomes. A downsampling analysis indicated that 20-fold CCS coverage can yield very good sequence assemblies, while even five-fold CCS data may capture the complete sequence of most genes. We present an updated reference genome assembly for barley with near-complete representation of the repeat-rich intergenic space. Long-read assembly can underpin the construction of accurate and complete sequences of multiple genomes of a species to build pan-genome infrastructures in Triticeae crops and their wild relatives.

A greatly improved reference genome sequence of barley was assembled from accurate long reads.     

Whole-genome sequencing of eukaryotes: From sequencing of DNA fragments to a genome assembly

Rapid advances in sequencing technologies of second- and even third-generation made the whole genome sequencing a routine procedure. However, the methods for assembling of the obtained sequences and its results require special consideration. Modern assemblers are based on heuristic algorithms, which lead to fragmented genome assembly composed of scaffolds and contigs of different lengths, the order of which along the chromosome and belonging to a particular chromosome often remain unknown. In this regard, the resulting genome sequence can only be considered as a draft assembly. The principal improvement in the quality and reliability of a draft assembly can be achieved by targeted sequencing of the genome elements of different size, e.g., chromosomes, chromosomal regions, and DNA fragments cloned in different vectors, as well as using reference genome, optical mapping, and Hi-C technology. This approach, in addition to simplifying the assembly of the genome draft, will more accurately identify numerical and structural chromosomal variations and abnormalities of the genomes of the studied species. In this review, we discuss the key technologies for the genome sequencing and the de novo assembly, as well as different approaches to improve the quality of existing drafts of genome sequences.     

Hybrid assembly of ultra-long Nanopore reads augmented with 10x-Genomics contigs: Demonstrated with a human genome

The 3rd generation of sequencing (3GS) technologies generate ultra-long reads (up to 1 Mb), which makes it possible to eliminate gaps and effectively resolve repeats in genome assembly. However, the 3GS technologies suffer from the high base-level error rates (15%–40%) and high sequencing costs. To address these issues, the hybrid assembly strategy, which utilizes both 3GS reads and inexpensive NGS (next generation sequencing) short reads, was invented. Here, we use 10×-Genomics® technology, which integrates a novel bar-coding strategy with Illumina® NGS with an advantage of revealing long-range sequence information, to replace common NGS short reads for hybrid assembly of long erroneous 3GS reads. We demonstrate the feasibility of integrating the 3GS with 10×-Genomics technologies for a new strategy of hybrid de novo genome assembly by utilizing DBG2OLC and Sparc software packages, previously developed by the authors for regular hybrid assembly. Using a human genome as an example, we show that with only 7× coverage of ultra-long Nanopore® reads, augmented with 10× reads, our approach achieved nearly the same level of quality, compared with non-hybrid assembly with 35× coverage of Nanopore reads. Compared with the assembly with 10×-Genomics reads alone, our assembly is gapless with slightly high cost. These results suggest that our new hybrid assembly with ultra-long 3GS reads augmented with 10×-Genomics reads offers a low-cost (less than ¼ the cost of the non-hybrid assembly) and computationally light-weighted (only took 109 calendar hours with peak memory-usage = 61GB on a dual-CPU office workstation) solution for extending the wide applications of the 3GS technologies.     

A draft genome of field pennycress (Thlaspi arvense) provides tools for the domestication of a new winter biofuel crop

Field pennycress (Thlaspi arvense L.) is being domesticated as a new winter cover crop and biofuel species for the Midwestern United States that can be double-cropped between corn and soybeans. A genome sequence will enable the use of new technologies to make improvements in pennycress. To generate a draft genome, a hybrid sequencing approach was used to generate 47 Gb of DNA sequencing reads from both the Illumina and PacBio platforms. These reads were used to assemble 6,768 genomic scaffolds. The draft genome was annotated using the MAKER pipeline, which identified 27,390 predicted protein-coding genes, with almost all of these predicted peptides having significant sequence similarity to Arabidopsis proteins. A comprehensive analysis of pennycress gene homologues involved in glucosinolate biosynthesis, metabolism, and transport pathways revealed high sequence conservation compared with other Brassicaceae species, and helps validate the assembly of the pennycress gene space in this draft genome. Additional comparative genomic analyses indicate that the knowledge gained from years of basic Brassicaceae research will serve as a powerful tool for identifying gene targets whose manipulation can be predicted to result in improvements for pennycress.     

HTS-PEG: A Method for High Throughput Sequencing of the Paired-Ends of Genomic Libraries

Second generation sequencing has been widely used to sequence whole genomes. Though various paired-end sequencing methods have been developed to construct the long scaffold from contigs derived from shotgun sequencing, the classical paired-end sequencing of the Bacteria Artificial Chromosome (BAC) or fosmid libraries by the Sanger method still plays an important role in genome assembly. However, sequencing libraries with the Sanger method is expensive and time-consuming. Here we report a new strategy to sequence the paired-ends of genomic libraries with parallel pyrosequencing, using a Chinese amphioxus (Branchiostoma belcheri) BAC library as an example. In total, approximately 12,670 non-redundant paired-end sequences were generated. Mapping them to the primary scaffolds of Chinese amphioxus, we obtained 413 ultra-scaffolds from 1,182 primary scaffolds, and the N50 scaffold length was increased approximately 55 kb, which is about a 10% improvement. We provide a universal and cost-effective method for sequencing the ultra-long paired-ends of genomic libraries. This method can be very easily implemented in other second generation sequencing platforms.     

Identification of Optimum Sequencing Depth Especially for De Novo Genome Assembly of Small Genomes Using Next Generation Sequencing Data

Next Generation Sequencing (NGS) is a disruptive technology that has found widespread acceptance in the life sciences research community. The high throughput and low cost of sequencing has encouraged researchers to undertake ambitious genomic projects, especially in de novo genome sequencing. Currently, NGS systems generate sequence data as short reads and de novo genome assembly using these short reads is computationally very intensive. Due to lower cost of sequencing and higher throughput, NGS systems now provide the ability to sequence genomes at high depth. However, currently no report is available highlighting the impact of high sequence depth on genome assembly using real data sets and multiple assembly algorithms. Recently, some studies have evaluated the impact of sequence coverage, error rate and average read length on genome assembly using multiple assembly algorithms, however, these evaluations were performed using simulated datasets. One limitation of using simulated datasets is that variables such as error rates, read length and coverage which are known to impact genome assembly are carefully controlled. Hence, this study was undertaken to identify the minimum depth of sequencing required for de novo assembly for different sized genomes using graph based assembly algorithms and real datasets. Illumina reads for E.coli (4.6 MB) S.kudriavzevii (11.18 MB) and C.elegans (100 MB) were assembled using SOAPdenovo, Velvet, ABySS, Meraculous and IDBA-UD. Our analysis shows that 50X is the optimum read depth for assembling these genomes using all assemblers except Meraculous which requires 100X read depth. Moreover, our analysis shows that de novo assembly from 50X read data requires only 6–40 GB RAM depending on the genome size and assembly algorithm used. We believe that this information can be extremely valuable for researchers in designing experiments and multiplexing which will enable optimum utilization of sequencing as well as analysis resources.     

Enhanced De Novo Assembly of High Throughput Pyrosequencing Data Using Whole Genome Mapping

Despite major advances in next-generation sequencing, assembly of sequencing data, especially data from novel microorganisms or re-emerging pathogens, remains constrained by the lack of suitable reference sequences. De novo assembly is the best approach to achieve an accurate finished sequence, but multiple sequencing platforms or paired-end libraries are often required to achieve full genome coverage. In this study, we demonstrated a method to assemble complete bacterial genome sequences by integrating shotgun Roche 454 pyrosequencing with optical whole genome mapping (WGM). The whole genome restriction map (WGRM) was used as the reference to scaffold de novo assembled sequence contigs through a stepwise process. Large de novo contigs were placed in the correct order and orientation through alignment to the WGRM. De novo contigs that were not aligned to WGRM were merged into scaffolds using contig branching structure information. These extended scaffolds were then aligned to the WGRM to identify the overlaps to be eliminated and the gaps and mismatches to be resolved with unused contigs. The process was repeated until a sequence with full coverage and alignment with the whole genome map was achieved. Using this method we were able to achieved 100% WGRM coverage without a paired-end library. We assembled complete sequences for three distinct genetic components of a clinical isolate of Providencia stuartii: a bacterial chromosome, a novel bla _NDM-1 plasmid, and a novel bacteriophage, without separately purifying them to homogeneity.     

金针菇基因组测序与组装策略分析

采用二代和三代测序技术分别对金针菇单核体菌株“6-3”进行测序,应用4种组装策略进行基因组的de novo组装,对比组装效果。基因组组装的参数方面,仅使用二代测序组装的效果最差,长度大于10kb的Contig全长只有24.6Mb,Contig N50只有23kb,组装率只有59.27%。采用三代组装二代校正的组装策略效果最好,长度大于10kb的Contig全长为38.3Mb,Contig N50为2.8Mb,组装率高达92.16%。保守单拷贝基因拼接效果方面,4种组装策略获得基因组序列与BUSCO数据库里的担子菌的保守单拷贝基因比对,基因完整性均大于94%。在组装准确性方面,经过PCR扩增、Sanger测序验证,三代组装二代校正的基因组序列完整并且连续,同时序列上碱基的SNP、InDel数量最少。综上所述,三代组装二代校正得到的基因组序列具有Contig N50值大、组装率高、碱基准确性高的特点,是食用菌基因组测序较为理想的方案。     

Multiplex sequencing of bacterial artificial chromosomes for assembling complex plant genomes

Hierarchical shotgun sequencing remains the method of choice for assembling high‐quality reference sequences of complex plant genomes. The efficient exploitation of current high‐throughput technologies and powerful computational facilities for large‐insert clone sequencing necessitates the sequencing and assembly of a large number of clones in parallel. We developed a multiplexed pipeline for shotgun sequencing and assembling individual bacterial artificial chromosomes (BACs) using the Illumina sequencing platform. We illustrate our approach by sequencing 668 barley BACs (Hordeum vulgare L.) in a single Illumina HiSeq 2000 lane. Using a newly designed parallelized computational pipeline, we obtained sequence assemblies of individual BACs that consist, on average, of eight sequence scaffolds and represent >98% of the genomic inserts. Our BAC assemblies are clearly superior to a whole‐genome shotgun assembly regarding contiguity, completeness and the representation of the gene space. Our methods may be employed to rapidly obtain high‐quality assemblies of a large number of clones to assemble map‐based reference sequences of plant and animal species with complex genomes by sequencing along a minimum tiling path.     

Base-Calling Algorithm with Vocabulary (BCV) Method for Analyzing Population Sequencing Chromatograms

Sanger sequencing is a common method of reading DNA sequences. It is less expensive than high-throughput methods, and it is appropriate for numerous applications including molecular diagnostics. However, sequencing mixtures of similar DNA of pathogens with this method is challenging. This is important because most clinical samples contain such mixtures, rather than pure single strains. The traditional solution is to sequence selected clones of PCR products, a complicated, time-consuming, and expensive procedure. Here, we propose the base-calling with vocabulary (BCV) method that computationally deciphers Sanger chromatograms obtained from mixed DNA samples. The inputs to the BCV algorithm are a chromatogram and a dictionary of sequences that are similar to those we expect to obtain. We apply the base-calling function on a test dataset of chromatograms without ambiguous positions, as well as one with 3–14% sequence degeneracy. Furthermore, we use BCV to assemble a consensus sequence for an HIV genome fragment in a sample containing a mixture of viral DNA variants and to determine the positions of the indels. Finally, we detect drug-resistant Mycobacterium tuberculosis strains carrying frameshift mutations mixed with wild-type bacteria in the pncA gene, and roughly characterize bacterial communities in clinical samples by direct 16S rRNA sequencing.     

Assembling millions of short DNA sequences using SSAKE

Novel DNA sequencing technologies with the potential for up to three orders magnitude more sequence throughput than conventional Sanger sequencing are emerging. The instrument now available from Solexa Ltd, produces millions of short DNA sequences of 25 nt each. Due to ubiquitous repeats in large genomes and the inability of short sequences to uniquely and unambiguously characterize them, the short read length limits applicability for de novo sequencing. However, given the sequencing depth and the throughput of this instrument, stringent assembly of highly identical sequences can be achieved. We describe SSAKE, a tool for aggressively assembling millions of short nucleotide sequences by progressively searching through a prefix tree for the longest possible overlap between any two sequences. SSAKE is designed to help leverage the information from short sequence reads by stringently assembling them into contiguous sequences that can be used to characterize novel sequencing targets. Availability: http://www.bcgsc.ca/bioinfo/software/ssake.     

Using Illumina next generation sequencing technologies to sequence multigene families in de novo species

The advent of Next Generation Sequencing Technology (NGST) has revolutionized molecular biology research, allowing for rapid gene/genome sequencing from a multitude of diverse species. As high throughput sequencing becomes more accessible, more efficient workflows must be developed to deal with the amounts of data produced and better assemble the genomes of de novo lineages. We combine traditional laboratory methods with Illumina NGST to amplify and sequence the largest mammalian multigene family, the Olfactory Receptor gene family, for species with and without a reference genome. We develop novel assembly methods to annotate and filter these data, which can be utilized for any gene family or any species. We find no significant difference between the ratio of genes within their respective gene families of our data compared with available genomic data. Using simulated data we explore the limitations of short‐read sequence data and our assembly in recovering this gene family. We highlight the benefits and shortcomings of these methods. Compared with data generated from traditional polymerase chain reaction, cloning and Sanger sequencing methodologies, sequence data generated using our pipeline increases yield and sequencing efficiency without reducing the number of unique genes amplified. A cloning step is not required, therefore shortening data generation time. The novel downstream methodologies and workflows described provide a tool to be utilized by many fields of biology, to access and analyze the vast quantities of data generated. By combining laboratory and in silico methods, we provide a means of extracting genomic information for multigene families without complete genome sequencing.     

Choosing a Benchtop Sequencing Machine to Characterise Helicobacter pylori Genomes

The fully annotated genome sequence of the European strain, 26695 was first published in 1997 and, in 1999, it was directly compared to the USA isolate J99, promoting two standard laboratory isolates for Helicobacter pylori (H. pylori) research. With the genomic scaffolds available from these important genomes and the advent of benchtop high-throughput sequencing technology, a bacterial genome can now be sequenced within a few days. We sequenced and analysed strains J99 and 26695 using the benchtop-sequencing machines Ion Torrent PGM and the Illumina MiSeq Nextera and Nextera XT methodologies. Using publically available algorithms, we analysed the raw data and interrogated both genomes by mapping the data and by de novo assembly. We compared the accuracy of the coding sequence assemblies to the originally published sequences. With the Ion Torrent PGM, we found an inherently high-error rate in the raw sequence data. Using the Illumina MiSeq, we found significantly more non-covered nucleotides when using the less expensive Illumina Nextera XT compared with the Illumina Nextera library creation method. We found the most accurate de novo assemblies using the Nextera technology, however, extracting an accurate multi-locus sequence type was inconsistent compared to the Ion Torrent PGM. We found the cagPAI failed to assemble onto a single contig in all technologies but was more accurate using the Nextera. Our results indicate the Illumina MiSeq Nextera method is the most accurate for de novo whole genome sequencing of H. pylori.