Complete nucleotide sequence and deduced polypeptide sequence of a nonmuscle myosin heavy chain gene from Acanthamoeba: evidence of a hinge in the rodlike tail

We have completely sequenced a gene encoding the heavy chain of myosin II, a nonmuscle myosin from the soil ameba Acanthamoeba castellanii. The gene spans 6 kb, is split by three small introns, and encodes a 1,509-residue heavy chain polypeptide. The positions of the three introns are largely conserved relative to characterized vertebrate and invertebrate muscle myosin genes. The deduced myosin II globular head amino acid sequence shows a high degree of similarity with the globular head sequences of the rat embryonic skeletal muscle and nematode unc 54 muscle myosins. By contrast, there is no unique way to align the deduced myosin II rod amino acid sequence with the rod sequence of these muscle myosins. Nevertheless, the periodicities of hydrophobic and charged residues in the myosin II rod sequence, which dictate the coiled-coil structure of the rod and its associations within the myosin filament, are very similar to those of the muscle myosins. We conclude that this ameba nonmuscle myosin shares with the muscle myosins of vertebrates and invertebrates an ancestral heavy chain gene. The low level of direct sequence similarity between the rod sequences of myosin II and muscle myosins probably reflects a general tolerance for residue changes in the rod domain (as long as the periodicities of hydrophobic and charged residues are largely maintained), the relative evolutionary "ages" of these myosins, and specific differences between the filament properties of myosin II and muscle myosins. Finally, sequence analysis and electron microscopy reveal the presence within the myosin II rodlike tail of a well-defined hinge region where sharp bending can occur. We speculate that this hinge may play a key role in mediating the effect of heavy chain phosphorylation on enzymatic activity.     

Complete nucleotide and encoded amino acid sequence of a mammalian myosin heavy chain gene. Evidence against intron-dependent evolution of the rod

The complete nucleotide sequence and exon/intron structure of the rat embryonic skeletal muscle myosin heavy chain (MHC) gene has been determined. This gene comprises 24 X 10(3) bases of DNA and is split into 41 exons. The exons encode a 6035 nucleotide (nt) long mRNA consisting of 90 nt of 5' untranslated, 5820 nt of protein coding and 125 nt of 3' untranslated sequence. The rat embryonic MHC polypeptide is encoded by exons 3 to 41 and contains 1939 amino acid residues with a calculated Mr of 223,900. Its amino acid sequence displays the structural features typical for all sarcomeric MHCs, i.e. an amino-terminal "globular" head region and a carboxy-terminal alpha-helical rod portion that shows the characteristics of a coiled coil with a superimposed 28-residue repeat pattern interrupted at only four positions by "skip" residues. The complex structure of the rat embryonic MHC gene and the conservation of intron locations in this and other MHC genes are indicative of a highly split ancestral sarcomeric MHC gene. Introns in the rat embryonic gene interrupt the coding sequence at the boundaries separating the proteolytic subfragments of the head, but not at the head/rod junction or between the 28-residue repeats present within the rod. Therefore, there is little evidence for exon shuffling and intron-dependent evolution by gene duplication as a mechanism for the generation of the ancestral MHC gene. Rather, intron insertion into a previously non-split ancestral MHC rod gene consisting of multiple tandemly arranged 28-residue-encoding repeats, or convergent evolution of an originally non-repetitive ancestral MHC rod gene must account for the observed structure of the rod-encoding portion of present-day MHC genes.     

The primary structure of skeletal muscle myosin heavy chain: IV. Sequence of the rod, and the complete 1,938-residue sequence of the heavy chain

In the preceding paper [Maita, T., Miyanishi, T., Matsuzono, K., Tanioka, Y., & Matsuda, G. (1991) J. Biochem. 110, 68-74], we reported the amino-terminal 837-residue sequence of the heavy chain of adult chicken pectoralis muscle myosin. This paper describes the carboxyl terminal 1,097-residue sequence and the linkage of the two sequences. Rod obtained by digesting myosin filaments with alpha-chymotrypsin was redigested with the protease at high KCl concentration, and two fragments, subfragment-2 and light meromyosin, were isolated and sequenced by conventional methods. The linkage of the two fragments was deduced from the sequence of an overlapping peptide obtained by cleaving the rod with cyanogen bromide. The rod contained 1,039 amino acid residues, but lacked the carboxyl-terminal 58 residues of the heavy chain. A carboxyl-terminal 63-residue peptide obtained by cleaving the whole heavy chain with cyanogen bromide was sequenced. Thus, the carboxyl terminal 1,097-residue sequence of the heavy chain was completed. The linkage of subfragment-1 and the rod was deduced from the sequence of an overlapping peptide between the two which was obtained by cleaving heavy meromyosin with cyanogen bromide. Comparing the sequence of the adult myosin thus determined with that of chicken embryonic myosin reported by Molina et al. [Molina, M.I., Kropp, K.E., Gulick, J., & Robbins, J. (1987) J. Biol. Chem. 262, 6478-6488], we found that the sequence homology is 94%.     

Complete primary structure of vertebrate smooth muscle myosin heavy chain deduced from its complementary DNA sequence. Implications on topography and function of myosin

The 1979 amino acid sequence of embryonic chicken gizzard smooth muscle myosin heavy chain (MHC) have been determined by cloning and sequencing its cDNA. Genomic Southern analysis and Northern analysis with the cDNA sequence show that gizzard MHC is encoded by a single-copy gene, and this gene is expressed in the gizzard and aorta. The encoded protein has a calculated Mr of 229 X 10(3), and can be divided into a long alpha-helical rod and a globular head. Only 32 to 33% of the amino acid residues in the rod and 48 to 49% in the head are conserved when compared with nematode or vertebrate sarcomeric MHC sequences. However, the seven residue hydrophobic periodicity, together with the 28 and 196 residue repeat of charge distribution previously described in nematode myosin rod, are all present in the gizzard myosin rod. Two of the trypsin-sensitive sites in gizzard light meromyosin have been mapped by partial peptide sequencing to 99 nm and 60 nm from the tip of the myosin tail, where these sites coincide with the two "hinges" for the 6 S/10 S transition. In the head sequence, several polypeptide segments, including the regions around the putative ATP-binding site and the reactive thiol groups, are highly conserved. These areas presumably reflect conserved structural elements important for the function of myosin. A multi-domain folding model of myosin head is proposed on the basis of the conserved sequences, information on the topography of myosin in the literature, and the predicted secondary structures. In this model, Mg2+ ATP is bound to a pocket between two opposing alpha/beta domains, while actin undergoes electrostatic interactions with lysine-rich surface loops on two other domains. The actin-myosin interactions are thought to be modulated through relative movements of the domains induced by the binding of ATP.     

Amino acid sequence of rabbit skeletal muscle myosin. 50-kDa fragment of the heavy chain

The amino acid sequence of the 50-kDa fragment that is released by limited tryptic digestion of the head portion of rabbit skeletal muscle myosin was determined by analysis and alignment of sets of peptides generated by digestion of the fragment at arginine or methionine residues. This fragment contains residues 205-636 of the myosin heavy chain; among the residues of particular interest in this fragment are N epsilon-trimethyllysine, one of four methyl-amino acids in myosin, and Ser-324, which is photoaffinity labeled by an ATP analogue (Mahmood, R., Elzinga, M., and Yount, R. G. (1989) Biochemistry 28, 3989-3995). Combination of this sequence with those of the 23- and 20-kDa fragments yields an 809-residue sequence that constitutes most of the heavy chain of chymotryptic S-1 of this myosin.     

The primary structure of skeletal muscle myosin heavy chain: II. Sequence of the 50 kDa fragment of subfragment-1

The complete amino acid sequence of the 50 kDa fragment of subfragment-1 from adult chicken pectoralis muscle myosin was determined. It contained 431 residues including an epsilon-N-trimethyllysine at position 346. The 431-residue sequence corresponds to the sequence of residues 206 to 639 of chicken embryonic breast muscle myosin heavy chain which was predicted from the nucleotide sequence of the cDNA by Molina et al. [Molina, M. I., Kropp, K.E., Gulick, J., & Robbins, J. (1987) J. Biol. Chem. 262, 6478-6488]. Comparing the two sequences, 23 amino acid substitutions and three deletions/insertions are recognized.     

The calmodulin binding domain of chicken smooth muscle myosin light chain kinase contains a pseudosubstrate sequence

Smooth muscle myosin light chain kinase contains a 64 residue sequence that binds calmodulin in a Ca2+-dependent manner (Guerriero, V., Jr., Russo, M. A., and Means, A. R. (1987) Biochemistry, in press). Within this region is a sequence with homology to the corresponding sequence reported for the calmodulin binding region of skeletal muscle myosin light chain kinase (Blumenthal, D. K., Takio, K., Edelman, A. M., Charbonneau, H., Titani, L., Walsh, K. A., and Krebs, E. G. (1985) Proc. Natl. Acad. Sci. U.S.A. 82, 3187-3191). Inspection of these sequences reveals that they both share a similar number and spatial arrangement of basic residues with those present in the myosin light chain substrate. We have synthesized a 22-residue peptide corresponding to residues 480-501 (determined from the cDNA) of the smooth muscle myosin light chain kinase. This peptide, Ala-Lys-Lys-Leu-Ser-Lys-Asp-Arg-Met-Lys-Lys-Tyr-Met-Ala-Arg-Arg-Lys-Trp- Gln-Lys-Thr-Gly, inhibited calmodulin-dependent activation of the smooth muscle myosin light chain kinase with an IC50 of 46 nM. At saturating concentrations of calmodulin, the 22-residue peptide inhibited myosin light chain and synthetic peptide substrate phosphorylation competitively with IC50 values of 2.7 and 0.9 microM, respectively. An 11-residue synthetic peptide analog, corresponding to part of the calmodulin-binding sequence in skeletal muscle myosin light chain kinase, Lys-Arg-Arg-Trp-Lys-Lys-Asn-Phe-Ile-Ala-Val, also competitively inhibited synthetic peptide substrate phosphorylation with a Ki of 1 microM. The competitive inhibitory activity of the calmodulin binding regions is similar to the apparent Km of 2.7 microM for phosphorylation of the 23-residue peptide analog of the smooth muscle myosin light chain and raises the possibility that the calmodulin binding region of the myosin light chain kinase may act as a pseudosubstrate inhibitor of the enzyme.     

Comparative structure of the protease-sensitive regions of the subfragment-1 heavy chain from smooth and skeletal myosins

The heavy chain fragments generated by restricted proteolysis of the smooth chicken gizzard myosin subfragment-1 (S-1) with trypsin, Staphylococcus aureus V8 protease, and chymotrypsin were isolated and submitted to partial amino acid sequencing. The comparison between the smooth and striated muscle myosin sequences permitted the unambiguous structural characterization of the two protease-vulnerable segments joining the three putative domain-like regions of the smooth head heavy chain. The smooth carboxyl-terminal connector is a serine-rich region located around positions 632-640 of the rabbit skeletal sequence and would represent the "A" site that is conformationally sensitive to the myosin 10 S-6 transition and to its interaction with actin (Ikebe, M., and Hartshorne, D. J. (1986) Biochemistry 25, 6177-6185). A third site which undergoes a nucleotide-dependent chymotryptic cleavage which inactivates the Mg2+-ATPase (Okamoto, Y., and Sekine, T. (1981) J. Biochem. (Tokyo) 90, 833-842, 843-849) was identified at Trp-31/Ser-32. It is vicinal to Lys-34 that is monomethylated in the skeletal heavy chain but not at all in the smooth sequence. However, the two trimethyl lysine residues present in the skeletal sequence are conserved in the same regions of the smooth S-1 and may play a general functional role in myosin. The smooth central 50-kDa segment could be selectively destroyed by a mild tryptic digestion in the absence of any unfolding agent, with a concomitant inhibition of the ATPase activities. This feature is in line with the proposed domain structure of the S-1 heavy chain and also suggests a relationship between the specific biochemical properties of the smooth S-1 and the particular conformation of its 50-kDa region.     

Paramyosin gene (unc-15) of Caenorhabditis elegans. Molecular cloning, nucleotide sequence and models for thick filament structure

Paramyosin is a major structural component of thick filaments isolated from many invertebrate muscles. The Caenorhabditis elegans paramyosin gene (unc-15) was identified by screening with specific antibodies an "exon-expression" library containing lacZ/nematode gene fusions. Short probes recovered from the library were used to identify bacteriophage lambda and cosmid clones that encompass the entire paramyosin (unc-15) gene. From these clones, numerous subclones containing epitopes reacting with anti-paramyosin sera were obtained, providing strong evidence that the initial cloned fragment was, in fact, derived from the structural gene for paramyosin. The complete nucleotide sequence of a 12 x 10(3) base-pair region spanning the gene was obtained. The gene is composed of ten short exons encoding a protein of 866 [corrected] amino acid residues. Paramyosin is highly similar to residues 267 to 1089 of myosin heavy chain rods. For most of its length, paramyosin appears to form an alpha-helical coiled-coil and shows the expected heptad repeat of hydrophobic amino acid residues and the 28-residue repeat of charged amino acids characteristic of myosin heavy chain rods. However, paramyosin differs from myosin in having non-helical extensions at both the N and C termini and an additional "skip" residue that interrupts the 28-residue repeat. The distribution of charges along the length of the paramyosin rod is also significantly different from that of myosin heavy chain rods. Potential charge-mediated interactions between paramyosin rods and between paramyosin and myosin rods were calculated using a model successfully applied previously to the analysis of the myosin rod sequences. Myosin rods aligned in parallel show optimal charge-charge interactions at multiples of 98 residue staggers (i.e. at axial displacements of multiples of 143 A). Paramyosin rods, in contrast, appear to interact optimally at parallel staggers of 493 residues (i.e. at axial displacements of 720 A) but show only weak interaction peaks at 98 or 296 residues. Similar calculations suggest optimal interactions between paramyosin molecules and myosin rods and in their anti-parallel alignments. The implications of these results for the structure of the bare zone and the assembly of nematode thick filaments are discussed.     

Critical regions for assembly of vertebrate nonmuscle myosin II

Myosin II molecules assemble and form filaments through their C-terminal rod region, and the dynamic filament assembly-disassembly process of nonmuscle myosin II molecules is important for cellular activities. To estimate the critical region for filament formation of vertebrate nonmuscle myosin II, we assessed the solubility of a series of truncated recombinant rod fragments of nonmuscle myosin IIB at various concentrations of NaCl. A C-terminal 248-residue rod fragment (Asp 1729-Glu 1976) was shown by its solubility behavior to retain native assembly features, and two regions within it were found to be necessary for assembly: 35 amino acid residues from Asp 1729 to Thr 1763 and 39 amino acid residues from Ala 1875 to Ala 1913, the latter containing a sequence similar to the assembly competence domain (ACD) of skeletal muscle myosin. Fragments lacking either of the two regions were soluble at any NaCl concentration. We referred to these two regions as nonmuscle myosin ACD1 (nACD1) and nACD2, respectively. In addition, we constructed an alpha-helical coiled-coil model of the rod fragment, and found that a remarkable negative charge cluster (termed N1) and a positive charge cluster (termed P2) were present within nACD1 and nACD2, respectively, besides another positive charge cluster (termed P1) in the amino-terminal vicinity of nACD2. From these results, we propose two major electrostatic interactions that are essential for filament formation of nonmuscle myosin II: the antiparallel interaction between P2 and N1 which is essential for the nucleation step and the parallel interaction between P1 and N1 which is important for the elongation step.     

The amino terminus of muscle tropomyosin is a major determinant for function

The amino-terminal region of muscle tropomyosin is highly conserved among muscle and 284-residue non-muscle tropomyosins. Analysis of fusion and nonfusion striated alpha-tropomyosins and a mutant in which residues 1-9 have been deleted has shown that the amino terminus is crucial for function. The presence of 80 amino acids of a nonstructural influenza virus protein (NS1) on the amino terminus of tropomyosin allows magnesium-independent binding of tropomyosin to actin. The fusion tropomyosin inhibits the actomyosin S1 ATPase at all myosin S1 concentrations tested, indicating that the presence of the fusion peptide prevents myosin S1 from switching the actin filament from the inhibited to the potentiated state. Nonfusion tropomyosin, an unacetylated form, has no effect on the actomyosin S1 ATPase, though it regulates normally with troponin. Deletion of residues 1-9, which are believed to overlap with the carboxyl-terminal end of tropomyosin in the thin filament, results in loss of tropomyosin function. The mutant is unable to bind to actin, in the presence and absence of troponin, and it has no regulatory function. The removal of the first 9 residues of tropomyosin is much more deleterious than removal of the last 11 by carboxypeptidase digestion. We suggest that the structure of the amino-terminal region and acetylation of the initial methionine are crucial for tropomyosin function.     

The last twenty residues in the head domain of mouse lamin A contain important structural elements for formation of head-to-tail polymers in vitro

Nuclear lamins are a type of intermediate filament (IF) proteins. They have a characteristic tripartite domain structure with a alpha-helical rod domain flanked by non-alpha-helical N-terminal head and C-terminal tail domains. While the head domain has been shown to be important for the formation of head-to-tail polymers that are critical assembly intermediates for lamin IFs, essential structural elements in this domain have remained obscure. As a first step to remedy this, a series of mouse lamin A mutants in which the head domain (30 amino acid residues) was deleted stepwise from the N-terminus at intervals of 10 residues were bacterially expressed. The assembly properties in vitro of the purified recombinant proteins were explored by electron microscopy. We observed that while a lamin A mutant lacking N-terminal 10 residues formed head-to-tail polymers, a mutant lacking N-terminal 20 residues or the whole head domain (30 residues) showed significantly decreased potency to form head-to-tail polymers. These results suggest that the last 20 residues (from Arg-11 to Gln-30) of the head domain of mouse lamin A contain essential structures for the formation of head-to-tail polymers. The last 20 residues of the head domain include several conserved residues between A- and B-type lamins and also the phosphorylation site for cdc2 kinase, which affects lamin IF organization in vivo and in vitro. Our results provide clues to the molecular mechanism by which the head domain plays a crucial role in lamin polymerization.     

Cloning of the cDNA encoding a neuronal myosin heavy chain from mammalian brain and its differential expression within the central nervous system.

The complete amino acid sequence of a neuronal myosin heavy chain (MHC) from mammalian brain (1999 amino acids, 230 kDa) has been deduced by sequencing cDNA clones isolated from a rat brain cDNA library. The library was screened using an affinity-purified polyclonal antibody that had been raised against myosin purified from a neuronally-derived cell line (Neuro-2A). Restriction digests of genomic DNA from Neuro-2A cells and rat brain are consistent with an identity of the sequenced isoform from these two sources. RNA blot analysis demonstrates this myosin to exhibit differential expression within the cerebral cortex and spinal cord. No expression was observed in liver, kidney, heart, spleen or skeletal muscle, or even within other regions of the brain. The sequence of this neuronal MHC is compared with those of other non-muscle MHCs, to which it shows an overall similarity of structure, especially with respect to conserved regions within the head (ATP binding site, actin binding site, reactive thiols) and the presence of an alpha-helical coiled-coil tail that can be arranged as 28-residue repeating units plus four skip residues. A unique non-helical tailpiece composed of 72 amino acid residues marks the C-terminus of this neuronal myosin isoform.     

Binding of hormones and neuropeptides by calmodulin

Calmodulin exhibits high-affinity, calcium-dependent binding of 1 mol/mol of the vasoactive intestinal peptide (VIP), secretin, and either the 42- or 43-residue gastric inhibitory peptide (GIP) with dissociation constants of 0.05-0.14 microM. The affinity of VIP for calmodulin approaches its affinity for the cell-surface VIP receptors. These peptides compete with both smooth muscle myosin light chain kinase and glucagon in calmodulin binding. Calculation of amino acid frequencies for eight calmodulin binding peptides (VIP, GIP, secretin, ACTH, beta-endorphin, substance P, glucagon, and dynorphin [Malencik, D. A., & Anderson, S. R. (1982) Biochemistry 21, 3480]) shows a below-average incidence of glutamyl residues, above-average incidence of glutaminyl residues, and average incidence of both aspartyl and asparaginyl residues. Predictions of structure from sequence suggest that the bound peptides contain strongly basic turns and coils in close association with regions having above-average beta-sheet potential. The temperature dependence of glucagon binding by calmodulin shows that the association is enthalpy driven.     

Amino acid sequence of the active site of Acanthamoeba myosin II

We have used the substrate [5,6-3H]UTP for direct photoaffinity labeling of the active site of the heavy chain of myosin II from Acanthamoeba castellanii. The only labeled peptide in a total tryptic digest had the sequence of Thr-Glu-Asn-Thr-Me2Lys-Lys (where Me2Lys represents dimethyllysine) with the substrate covalently bound to the Glu residue. This sequence differs at only one position from the sequence of residues 184-189 of nematode myosin heavy chain (Me2Lys----Lys), a post-translational modification, and at two additional positions from residues 185-190 of rabbit skeletal muscle myosin (Glu----Val and Lys----Arg). The partial sequence of a larger labeled peptide derived from total chymotryptic digestion was compatible with and extended this sequence. A 20-residue sequence that contains the active site, tryptic hexapeptide is otherwise identical in Acanthamoeba and rabbit skeletal muscle myosins and has only one more difference in nematode myosin. Because UTP is a substrate for myosin II and a "zero-length" probe, we believe that it identifies amino acid residues that are very close to the substrate during the catalytic cycle.     

Interaction of the N-terminus of chicken skeletal essential light chain 1 with F-actin

Skeletal myosin has two isoforms of the essential light chain (ELC), called LC1 and LC3, which differ only in their N-terminal amino acid sequence. The LC1 has 41 additional residues containing seven pairs of Ala-Pro, which form an elongated structure, and two pairs of lysines located near the N-terminus. When myosin subfragment-1 (S1) binds to actin, these lysines may interact with the C-terminus of actin and be responsible for the isoform specific properties of myosin. Here we employ cross-linking to identify the LC1 residues that are in contact with actin. S1 was reconstituted with various LC1 mutants and reacted with the zero-length cross-linker 1-ethyl-3-[3-dimethyl-aminopropyl]-carbodiimide (EDC). Cross-linking occurred only when actin was in molar excess over S1. Wild-type LC1 could be cross-linked through the terminal alpha-NH2 group, as well as via the two pairs of lysines. In a mutant ELC, where the lysines were deleted but two arginines were introduced near the N-terminus, the light chain could still be cross-linked via the terminal alpha-NH2 group. When the charge was reduced in the N-terminal region while retaining the Ala-Pro rich region, the mutant could not be cross-linked. These results suggest that as long as the N-terminus contains charged residues and an Ala-Pro rich extension, the binding between LC1 and actin can occur.     

Human embryonic myosin heavy chain cDNA. Interspecies sequence conservation of the myosin rod, chromosomal locus and isoform specific transcription of the gene

A 3.6 kilobase cDNA clone coding for the human embryonic myosin heavy chain has been isolated and characterized from an expression library prepared from human fetal skeletal muscle. The derived amino acid sequence for the entire rod part of myosin shows 97% sequence homology between human and rat and a striking interspecies sequence conservation among the charged amino acid residues. The single copy gene is localized to human chromosome 17 and its expression in fetal skeletal muscle is developmentally regulated. The sequence information permits the design of isoform-specific probes for studies on the structure of the gene and its role in normal and defective human myogenesis.     

The Last Twenty Residues in the Head Domain of Mouse Lamin A Contain Important Structural Elements for Formation of Head-to-Tail Polymers in Vitro

Nuclear lamins are a type of intermediate filament (IF) proteins. They have a characteristic tripartite domain structure with a α-helical rod domain flanked by non-α-helical N-terminal head and C-terminal tail domains. While the head domain has been shown to be important for the formation of head-to-tail polymers that are critical assembly intermediates for lamin IFs, essential structural elements in this domain have remained obscure. As a first step to remedy this, a series of mouse lamin A mutants in which the head domain (30 amino acid residues) was deleted stepwise from the N-terminus at intervals of 10 residues were bacterially expressed. The assembly properties in vitro of the purified recombinant proteins were explored by electron microscopy. We observed that while a lamin A mutant lacking N-terminal 10 residues formed head-to-tail polymers, a mutant lacking N-terminal 20 residues or the whole head domain (30 residues) showed significantly decreased potency to form head-to-tail polymers. These results suggest that the last 20 residues (from Arg-11 to Gln-30) of the head domain of mouse lamin A contain essential structures for the formation of head-to-tail polymers. The last 20 residues of the head domain include several conserved residues between A- and B-type lamins and also the phosphorylation site for cdc2 kinase, which affects lamin IF organization in vivo and in vitro. Our results provide clues to the molecular mechanism by which the head domain plays a crucial role in lamin polymerization.