重组人粒细胞集落刺激因子缓释微球的研究

目的：研究固体／油／水法制备重组人粒细胞集落刺激因子缓释微球,为开发其缓释剂型进行初步研究。方法：以聚乳酸．聚羟乙酸共聚物（PLGA）为载体材料：用固体／油／水法和水／油／水法制备载rhG-CSF缓释微球;考察粒径大小、外观、包封率等理化性质;用MieroBCA法考察微球的体外释药特性及影响因素;用SEC-HPLC和MTT比色法初步评价了微球制备工艺过程对rhG-CSF稳定性的影响。结果：两种方法制得的微球形态圆整、分散性良好,包封率均超过80％。固／油／水法制得的微球体外释放在2周内可超过90％,而水／油／水法制得的微球在相同的时间内仅释放30％。对于固／油／水法制备过程,SEC-HPLC法测定蛋白无明显聚集体出现,MTT法测定蛋白活性无明显损失。结论：实验证明了固／油／水法制备的PLGA微球可以实现2周以上的体外缓释。     

影响PLGA微球包封率和粒径相关因素研究进展

聚乳酸乙醇酸共聚物(PLGA)是一种可生物降解的高分子聚合物,具有良好的生物相容性,其降解产物为乳酸和乙醇酸,是机体正常代谢的中间产物,最终可分解为二氧化碳和水,并分别经肺和肾脏排出体外,对人体不产生危害,所以PLGA在微球制剂的制备中常作为首选载体。近年来PLGA微球制剂在医药领域有着飞跃发展,尤其是在抗肿瘤、免疫疫苗、蛋白给药、基因治疗、诊断试剂和细胞支架等方面显现出很大优势。而且已有许多PLGA微球获得美国FDA批准上市,临床应用也有令人满意的效果,未见报道有严重的不良反应。但现阶段国内生产的PLGA缓释微球的质量还有很多不足之处如微球粒径偏大、包封率和载药量偏低、突释过大等,有待进一步提高和改进。本文将综述在制备包裹水溶性药物的PLGA微球过程中相关因素如药物本身理化性质、制备方法、PLGA结构特点、有机溶剂等对微球粒径、包封率的影响,以期为提高以PLGA为药物载体的药效奠定良好的理论基础。     

普朗尼克F-127以及PLGA对多孔微球的影响

目的:考察致孔剂普朗尼克F-127以及不同型号聚乳酸-聚羟基乙酸共聚物(poly(lactic-co-glycolic acid),PLGA)配比对于PLGA多孔微球形态和孔洞形成的影响。方法:制备多种处方的PLGA多孔微球,添加不同量的致孔剂普朗尼克F-127,部分不添加任何致孔剂,并且利用PLGA型号为50501A和50502A的不同比例制备多种处方的多孔微球,进行SEM观察缓释多孔微球的整体形态和孔洞。结果:1)添加了不同量的致孔剂普朗尼克F-127的微球,表面的孔洞大小随F-127的添加量成正比关系。2)添加了致孔剂普朗尼克F-127的PLGA微球表面有较多的碎屑粘连,有大量的微球分子破裂,未有添加任何致孔剂的微球,微球的形态较好,球形规整。3)利用不同型号PLGA配比制备的微球SEM图表明,利用PLGA型号为50501A制备的微球表面孔洞清晰,孔洞均匀分布,而利用50502A制备的缓释多孔微球表面的孔洞很少。结论:1)致孔剂普朗尼克F-127会造成小分子的PLGA多孔微球的破裂,不宜作为小分子PLGA多孔微球时的致孔剂。2)不同型号PLGA的配比会对制备的PLGA多孔微球的孔径产生比较大的影响,形成的微球孔径与PLGA的特性粘度成反比。     

PLGA作为抗原递送系统的研究进展

近年来新冠病毒肆虐,单针剂的疫苗研制备受关注。传统疫苗制剂需要在一段时间内多次反复接种才能产生足够的中和抗体。为了降低疫苗接种次数、提高人们的疫苗接种依从性,高分子聚合物材料逐渐走进人们视野,其中聚乳酸-羟基乙酸共聚物(poly lactic-co-glycolic acid, PLGA)是当前研究最多、应用最广泛的高分子聚合物材料。PLGA作为一种人工合成的高分子聚合物材料,易于制备、价格相对较低,且具有良好的缓释特性,以及生物安全性和组织相容性,已经被FDA批准应用于药物递送系统,但在疫苗研发上方兴未艾。总结了PLGA佐剂的基本信息,根据当前疫苗研究趋势分析整理了影响其缓释效果和免疫调节作用的相关因素,以及当前的不足和限制,为后续疫苗制备和研究提供一些思路。     

PLGA微球复合明胶组织工程支架缓释蛋白药物的研究

目的：研究PLGA微球复合明胶支架对蛋白药物的释放影响。方法：将模型蛋白BSA通过复乳法制备成缓释PLGA微球,然后将微球埋置于明胶支架中,形成担载蛋白的PLGA微球复合明胶组织工程支架。考察复合支架体外蛋白释放行为,并用MicroBCA法定量测定释放的BSA量,采用β-半乳糖苷酶催化ONPG的方法检测制备前后蛋白的活性,并与不含PLGA微球直接担载蛋白的支架做对照。结果：PLGA微球复合支架蛋白的包封率能达到73．2％,其中第一天释放20％,对蛋白活性的保持达到70％以上。结论：微球复合明胶支架可以改善一般组织工程支架蛋白药物的突释,提高蛋白药物在制剂,贮存,释放过程中的稳定性。     

装载于PLGA中的5-氟尿嘧啶缓释微球的制备及其体外释放的研究

目的：研究装载于不同分子量的PLGA中的5-氟尿嘧啶微球的制备方法及其在体外条件下的缓释行为。方法：以水包油包固复乳法将5-氟尿嘧啶包裹在高分子聚乳酸-聚羟基乙酸共聚物（PLGA）中,形成缓释微球,考察其大小,外观,包封率等理化性质,以紫外分光光度法为检测方法研究其体外释放行为。结果：经扫描电子显微镜观察,所制备的微球形态完整,大小较均匀。具有一定得包封率和载药量,体外释放研究表明其处方1和处方2的缓释时间为8天和23天。结论：以水包油包固复乳法制备的PLGA 5-氟尿嘧啶微球能够达到缓释的目的。     

装载于PLGA中的5-氟尿嘧啶缓释微球的制备及其体外释放的研究

目的:研究装载于不同分子量的PLGA中的5-氟尿嘧啶微球的制备方法及其在体外条件下的缓释行为。方法:以水包油包固复乳法将5-氟尿嘧啶包裹在高分子聚乳酸-聚羟基乙酸共聚物(PLGA)中,形成缓释微球,考察其大小,外观,包封率等理化性质,以紫外分光光度法为检测方法研究其体外释放行为。结果:经扫描电子显微镜观察,所制备的微球形态完整,大小较均匀。具有一定得包封率和载药量,体外释放研究表明其处方1和处方2的缓释时间为8天和23天。结论:以水包油包固复乳法制备的PLGA 5-氟尿嘧啶微球能够达到缓释的目的。     

载10-甲氧基喜树碱缓释纳米粒的制备、表征与体外释药研究

以高分子多聚物聚乳酸(PLA)为材料,10-甲氧基喜树碱(Me OCPT)为模型药物,采用乳化溶剂挥发法制备载10-甲氧基喜树碱缓释纳米粒,表征并考察其体外释药特性。透射电子显微镜观察缓释纳米粒具有明显的球状结构,确定了最佳投料比为0.02∶1,平均粒径在100~250 nm之间,包封率和载药量分别为83.57±3.45%和3.10±1.19%,体外持续缓慢释放达48 h以上,累计释放率超过70%,缓释效果明显。以乳化溶剂挥发法成功制备的载10-甲氧基喜树碱缓释纳米粒,为聚乳酸作为药物缓控释载体的进一步研究提供依据,为难溶性小分子药物研究提供方向。     

一种白细胞介素-2缓释微球制备新方法及体外表征

目的：开发一种白细胞介素-2（m-2）长效缓释微球剂型。方法：采用S／O／W法制备了白介素-2因子多糖微粒的PLGA微球,考察了微球的表面形态、粒径分布等,并且运用ELISA方法考察了微球的体外释放效果。结果：本方法制备的白介素-2因子微球光滑圆整,粒径分布较均匀,体外缓释达32天,累积释放率近90％。结论：本方法制备的白介素-2因子微球,不仅具有有效地保护IL-2蛋白活性,同时实现长效缓释的目标,是一种可行的蛋白缓释方案。     

粒细胞-巨噬细胞集落刺激因子微球制剂的体外释放研究

目的：开发一种粒细胞-巨噬细胞集落刺激因子（GM—CSF）长效缓释微球剂型。方法：采用S／O／hO法制备了包裹粒细胞一巨噬细胞集落刺激因子多糖玻璃体颗粒的PLGA微球,考察了微球的表面形态、粒径分布等,并且运用ELISA方法考察了微球的体外释放效果。结果：本方法制备的粒细胞-巨噬细胞集落刺激因子微球光滑圆整,粒径分布均匀,体外可以缓释达32天,累积释放率接近90％。结论：本方法制备的粒细胞-巨噬细胞集落刺激因子微球能有效地保护蛋白活性,同时实现长效缓释的目标,是一种可行的蛋白缓释方案。     

Biomolecular hydrogels formed and degraded via site-specific enzymatic reactions

We present polymeric hydrogel biomaterials that are biomimetic both in their synthesis and degradation. The design of oligopeptide building blocks with dual enzymatic responsiveness allows us to create polymer networks that are formed and functionalized via enzymatic reactions and are degradable via other enzymatic reactions, both occurring under physiological conditions. The activated transglutaminase enzyme factor XIIIa was utilized for site-specific coupling of prototypical cell adhesion ligands and for simultaneous cross-linking of hydrogel networks from factor XIIIa substrate-modified multiarm poly(ethylene glycol) macromers. Ligand incorporation is nearly quantitative and thus controllable, and does not alter the network's macroscopic properties over a concentration range that elicits specific cell adhesion. Living mammalian cells can be encapsulated in the gels without any noticeable decrease in viability. The degradation of gels can be engineered to occur, for example, via cell-secreted matrix metalloproteinases, thus rendering these gels interesting for biomedical applications such as drug delivery systems or smart implants for in situ tissue engineering.     

The cultivation of cells on the porous titanium implants with the different structure

The data on human dermal fibroblasts and rabbit mesenchymal stromal cells cultivation on porous titanium implants are presented in given paper. Two types of implants were used: type 1--with irregular pores formed by pressed titanium particles and type 2--with regular pores formed by coalescence of one-size titanium particles into implant. The goal of this study was to choose the type of titanium implant porosity which ensures the tightest interaction of titanium implant with surrounding tissue cells after implantation in the body. Cells were cultivated on implants for 7 days and in both cases they formed confluent monolayer on the implants surfaces. That indicated adhesion, migration and proliferation of cells on such implants. Condition of cells cultured on titanium implants was controlled by scanning electron microscopy. The character of fibroblasts interaction with given implants was different depending on porosity type of implants. On implants with irregular pores, the cells were more spread and overlapped the pores spreading over neighbored particles. On implants with regular pores that formed by one-size particles into implant, the fibroblasts covered these particles not overlapping the pores and seldom interacted with neighbored particles by small outgrowths. There was no tight interaction of particles into implant. In implants formed by pressed particles, the cells grew not only on the surface but also in the depth of implant. Thereby, we suppose that more tight interaction of cells with titanium implant and, supposedly, tissues with implant in an organism will take place in the case of implant structure formed by pressed titanium particles.     

Cultivation of the retinal pigment epithelium in the cavity of the lentectomized eye of newts

A study was made of proliferative activity and transdifferentiation of the cells of retinal pigment epithelium (RPE) cultivated in the cavity of the lensectomized eye of adult newt. Implantation of the newt RPE together with vascular membrane and scleral coat resulted in the regeneration of retina. In this process the character of changes in the proliferative activity of RPE and differentiation of retinal cells were the same as in the regeneration of retina in situ. RPE implanted with the vascular membrane alone, despite a high level of proliferation during the first ten days of cultivation, no differentiated retina was formed. Possible causes of these differences are discussed, and the comparison is made of the data obtained with those on RPE cultivation in vitro. After lens removal, with RPE implants present in the eye cavity, in addition to the regenerated lens, 2-3 extra lenses and retina were formed from the cells of the inner layer of the recipient's dorsal iris. Also some cases were revealed of lens formation from the cells of ventral iris. With a complete detachment of the recipient's retina (an after-effect of transplantation) a second differentiated retina regenerated in situ from the recipient's RPE cells.     

Multi-Scale Modification of Metallic Implants With Pore Gradients,Polyelectrolytes and Their Indirect Monitoring In vivo

Metallic implants, especially titanium implants, are widely used in clinical applications. Tissue in-growth and integration to these implants in the tissues are important parameters for successful clinical outcomes. In order to improve tissue integration, porous metallic implants have being developed. Open porosity of metallic foams is very advantageous, since the pore areas can be functionalized without compromising the mechanical properties of the whole structure. Here we describe such modifications using porous titanium implants based on titanium microbeads. By using inherent physical properties such as hydrophobicity of titanium, it is possible to obtain hydrophobic pore gradients within microbead based metallic implants and at the same time to have a basement membrane mimic based on hydrophilic, natural polymers. 3D pore gradients are formed by synthetic polymers such as Poly-L-lactic acid (PLLA) by freeze-extraction method. 2D nanofibrillar surfaces are formed by using collagen/alginate followed by a crosslinking step with a natural crosslinker (genipin). This nanofibrillar film was built up by layer by layer (LbL) deposition method of the two oppositely charged molecules, collagen and alginate. Finally, an implant where different areas can accommodate different cell types, as this is necessary for many multicellular tissues, can be obtained. By, this way cellular movement in different directions by different cell types can be controlled. Such a system is described for the specific case of trachea regeneration, but it can be modified for other target organs. Analysis of cell migration and the possible methods for creating different pore gradients are elaborated. The next step in the analysis of such implants is their characterization after implantation. However, histological analysis of metallic implants is a long and cumbersome process, thus for monitoring host reaction to metallic implants in vivo an alternative method based on monitoring CGA and different blood proteins is also described. These methods can be used for developing in vitro custom-made migration and colonization tests and also be used for analysis of functionalized metallic implants in vivo without histology.     

Prolongation of Life in Anephric Rats following de novo Renal Organogenesis

One solution to the shortage of human organs available for transplantation envisions growing new organs in situ. This can be accomplished by transplantation of developing organ anlagen/primordia. Allotransplantation of embryonic day 15 metanephroi into the omentum of adult hosts is followed by differentiation, growth, vascularization and function of the implants. Here we show that survival of rats with all native renal mass removed can be increased by prior metanephros transplantation and ureteroureterostomy. Excretion of urine formed by metanephroi is prerequisite for enhanced survival. This is the first demonstration that life can be extended following de novo renal organogenesis.     

Mammary implants, diving, and altitude exposure

Mammary implants were exposed to various simulated dive profiles followed by altitude exposures to stimulate aircraft travel and then were observed for bubble formation and volume changes. Minimal volume changes occurred after each dive. Numerous bubbles formed, however, reaching their maximum size in 3 hours. By comparison, when implants were exposed to high altitude following a dive exposure, significant volume changes occurred. This in vitro study showed that bubble formation and volume expansion occur after exposing implants to diving and altitude, but the circumstances required to produce these changes in vivo are extremely unlikely to occur normally.     

Formulation and Evaluation of PLA and PLGA In Situ Implants Containing Secnidazole and/or Doxycycline for Treatment of Periodontitis

The purpose of this study is to formulate in situ implants containing doxycycline hydrochloride and/or secnidazole that could be used in the treatment of periodontitis by direct periodontal intrapocket administration. Biodegradable polymers [poly (lactide) (PLA) and poly (lactide-co-glycolide) (PLGA)], each polymer in two concentrations 25%w/w, 35%w/w were used to formulate the in situ implants. The rheological behavior, in vitro drug release and the antimicrobial activity of the prepared implants were evaluated. Increasing the concentration of each polymer increases the viscosity and decreases the percent of the drugs released after 24 h. PLA implants showed a slower drugs release rate than PLGA implants in which the implants composed of 25% PLGA showed the fastest drugs release. The in vitro drug release and antimicrobial activity results were compared with results of Atridox. Results revealed that the pharmaceutical formulation based on 25% PLGA containing secnidazole and doxycycline hydrochloride has promising activity in treating periodontitis in comparison with Atridox.     

A simplified procedure for mechanical testing of lumbar spinal fixation implants]

On the basis of the current ASTM and ISO standard proposals, a simplified test procedure for spinal fixation implants has been developed. It comprises static and dynamic tests aimed at evaluating the stiffness and strength of various different internal implants. Different methods of mounting the pedicle screws to the test device are shown to significantly affect the characteristic values and failure mechanisms of the implants. The feasibility of the procedure was investigated by comparing 7 different internal fixation implants. The reproducible results revealed general differences associated with the material, dimensions and design, which latter in particular correlated with the specific failure mechanisms. For longer-term in situ duration, testing of these implants should be expanded to include an analysis of wear and corrosion properties.     

Improvement of osseointegration of bio-inert ceramics by modification of the surface--results of an animal experiment]

The aim of this experimental study was to screen different surface structures of alumina and zirconia ceramic implants for their osteointegration properties. Alumina and zirconia ceramic test implants having different surface structures (smooth, macro-structured, corundum-blasted, porous) were implanted in the femora of mini-pigs, and left in situ for 12 weeks. After removal, the implants were evaluated macroradiographically and histologically. The smooth and macro-structured ceramic surfaces showed virtually no bony ingrowth, neither in the cortical nor the cancellous bone areas. In contrast, a rough surface finish or a porous surface structure allowed extensive bony ingrowth. The osteointegration rates varied between 20.5% and 41.7% (cancellous bone), and between 26.0% and 52.8% (cortical bone). With regard to the development of ceramic implants for clinical use, for example in the field of total hip replacement, these data provide a basis for further, more comprehensive studies.     

Cell cultivation on porous titanium implants with various structures

The paper presents data on the cultivation of human dermal fibroblasts and rabbit mesenchymal stromal cells on two types of porous titanium implants, i.e., those with irregular pores formed by pressed titanium particles and those with regular pores formed by the cohesion of one-size titanium particles inside the implant. The goal of this study was to determine what type of titanium implant porosity ensured its strongest interaction with cells. Cells were cultivated on implants for 7 days. During this period, they formed a confluent monolayer on the implant surface. Cells grown on titanium implants were monitored by scanning electron microscopy. Fibroblasts interaction with implants depended on the implant porosity structure. On implants with irregular pores cells were more spread. On implants with regular pores fibroblasts enveloped particles and were only occasionally bound with neighboring particles by small outgrowths. There was no tight interaction of particles inside the implant. In implants formed by pressed particles, cells grow not only on surface, but also in the depth of the implant. Thus, we suppose that a tighter interaction of cells with the titanium implant and, supposedly, tissues with the implant in the organism will take place in the variant when the implant structure is formed by pressed titanium particles, i.e., cellular interaction was observed inside the implant. In implants with irregular pores, cells grew both on the surface and in the depth. Thus, cells exhibited more adequate interactions with irregular pore titanium implants in vitro and hopefully the same interaction will be true in tissues after the implantation of the prosthesis into the organism.