Synthesis of fatty acid esters and diacylglycerols at elevated temperatures by alkalithermophilic lipases from Thermosyntropha lipolytica

LipA and LipB of Thermosyntropha lipolytica DSM 11003 as previously published are the most alkalithermophilic (pH _opt ^25°C  = 9.4–9.6, T _opt = 96°C) and thermostable (T _1/2 ^24 h  = 74–76°C) lipases currently known. The purified enzymes were analyzed in organic solvents for their ability to catalyze synthesis of diacylglycerols and various alcohol fatty acids. To obtain 100% recovery and avoid a 40% and 50% loss of catalytic activity during lyophilization of purified LipA and LipB, respectively, addition of 1 mg/ml bovine serum albumin (BSA) and 25% polyethylene glycol (PEG400) was required. LipA and LipB catalyzed esterification of fatty acids and alcohols with the highest yields for octyl oleate (LipA) and lauryl oleate (LipB) and also catalyzed synthesis of 1,3-dioleoyl glycerol, 1-oleoyl-3-lauroyl glycerol, and 1-oleoyl-3-octoyl glycerol. Isooctane was the most efficient solvent for esterification reactions at 85°C. Similar to the positional specificity for the hydrolytic reaction in aqueous solutions, LipA and LipB catalyzed in organic solvents the synthesis of diacylglycerol with esterification of position 1 and 3 with a yield of 62% for di-oleoyl glycerol. The reported conversion rates do not represent the full potential of these enzymes, since only 1/100th–1/1,000th of the protein concentrations usually used in commercial processes were available. However, use of slightly increased protein concentrations confirmed the trend to higher yields with higher protein concentrations. The obtained specificity and variety of the reactions catalyzed by LipA and LipB, and their high thermostability allowing synthesis to occur at 90°C, demonstrate their great potentials for industrial applications, particularly in structured lipid biosynthesis for substrates that are less soluble at mesobiotic temperatures.     

A Cold-Adapted Lipase of an Alaskan Psychrotroph, Pseudomonas sp. Strain B11-1: Gene Cloning and Enzyme Purification and Characterization

A psychrotrophic bacterium producing a cold-adapted lipase upon growth at low temperatures was isolated from Alaskan soil and identified as a Pseudomonas strain. The lipase gene (lipP) was cloned from the strain and sequenced. The amino acid sequence deduced from the nucleotide sequence of the gene (924 bp) corresponded to a protein of 308 amino acid residues with a molecular weight of 33,714. LipP also has consensus motifs conserved in other cold-adapted lipases, i.e., Lipase 2 from Antarctic Moraxella TA144 (G. Feller, M. Thiry, J. L. Arpigny, and C. Gerday, DNA Cell Biol. 10:381–388, 1991) and the mammalian hormone-sensitive lipase (D. Langin, H. Laurell, L. S. Holst, P. Belfrage, and C. Holm, Proc. Natl. Acad. Sci. USA 90:4897–4901, 1993): a pentapeptide, GDSAG, containing the putative active-site serine and an HG dipeptide. LipP was purified from an extract of recombinant Escherichia coli C600 cells harboring a plasmid coding for the lipP gene. The enzyme showed a 1,3-positional specificity toward triolein. p-Nitrophenyl esters of fatty acids with short to medium chains (C₄ and C₆) served as good substrates. The enzyme was stable between pH 6 and 9, and the optimal pH for the enzymatic hydrolysis of tributyrin was around 8. The activation energies for the hydrolysis of p-nitrophenyl butyrate and p-nitrophenyl laurate were determined to be 11.2 and 7.7 kcal/mol, respectively, in the temperature range 5 to 35°C. The enzyme was unstable at temperatures higher than 45°C. The K_m of the enzyme for p-nitrophenyl butyrate increased with increases in the assay temperature. The enzyme was strongly inhibited by Zn²⁺, Cu²⁺, Fe³⁺, and Hg²⁺ but was not affected by phenylmethylsulfonyl fluoride and bis-nitrophenyl phosphate. Various water-miscible organic solvents, such as methanol and dimethyl sulfoxide, at concentrations of 0 to 30% (vol/vol) activated the enzyme.     

Characterization of a Novel Metal-Dependent D-Psicose 3-Epimerase from Clostridium scindens 35704

The noncharacterized protein CLOSCI_02528 from Clostridium scindens ATCC 35704 was characterized as D-psicose 3-epimerase. The enzyme showed maximum activity at pH 7.5 and 60°C. The half-life of the enzyme at 50°C was 108 min, suggesting the enzyme was relatively thermostable. It was strictly metal-dependent and required Mn²⁺ as optimum cofactor for activity. In addition, Mn²⁺ improved the structural stability during both heat- and urea-induced unfolding. Using circular dichroism measurements, the apparent melting temperature (T _m) and the urea midtransition concentration (C _m) of metal-free enzyme were 64.4°C and 2.68 M. By comparison, the Mn²⁺-bound enzyme showed higher T _m and C _m with 67.3°C and 5.09 M. The Michaelis-Menten constant (K _m), turnover number (k _cat), and catalytic efficiency (k _cat/K _m) values for substrate D-psicose were estimated to be 28.3 mM, 1826.8 s⁻¹, and 64.5 mM⁻¹ s⁻¹, respectively. The enzyme could effectively produce D-psicose from D-fructose with the turnover ratio of 28%.     

Production,purification and biochemical characterisation of a novel lipase from a newly identified lipolytic bacterium Staphylococcus caprae NCU S6

A novel lipase, SCNL, was isolated from Staphylococcus caprae NCU S6 strain in the study. The lipase was purified to homogeneity with a yield of 6.13% and specific activity of 502.76 U/mg, and its molecular weight was determined to be approximately 87 kDa. SCNL maintained above 80% of its initial activity at a wide range of temperatures (20–50 °C) and pH values (6–11), with an optimal temperature at 40 °C and optimal pH at 9.0 with p-nitrophenyl palmitate as a substrate. SCNL exhibited a higher residual activity than the other staphylococcal lipases in the presence of common enzyme inhibitors and commercial detergents. The lipase activity was enhanced by organic solvents (isooctane, glycerol, DMSO and methanol) and metal ions (Na⁺, Ba²⁺, Ca²⁺, and Mn²⁺). The Km and Vmax values of SCNL were 0.695 mM and 262.66 s⁻¹mM⁻¹, respectively. The enzyme showed a preference for p-NP stearate, tributyrin and canola oil. These biochemical features of SCNL suggested that it may be an excellent novel lipase candidate for industrial and biotechnological applications.     

A novel thermostable arylesterase from the archaeon Sulfolobus solfataricus P1: purification, characterization, and expression

A novel thermostable arylesterase, a 35-kDa monomeric enzyme, was purified from the thermoacidophilic archaeon Sulfolobus solfataricus P1. The optimum temperature and pH were 94°C and 7.0, respectively. The enzyme displayed remarkable thermostability: it retained 52% of its activity after 50 h of incubation at 90°C. In addition, the purified enzyme showed high stability against denaturing agents, including various detergents, urea, and organic solvents. The enzyme has broad substrate specificity besides showing an arylesterase activity toward aromatic esters: it exhibits not only carboxylesterase activity toward tributyrin and p-nitrophenyl esters containing unsubstituted fatty acids from butyrate (C₄) to palmitate (C₁₆), but also paraoxonase activity toward organophosphates such as p-nitrophenylphosphate, paraoxon, and methylparaoxon. The k_cat/K_m ratios of the enzyme for phenyl acetate and paraoxon, the two most preferable substrates among all tested, were 30.6 and 119.4 s⁻¹·μM⁻¹, respectively. The arylesterase gene consists of 918 bp corresponding to 306 amino acid residues. The deduced amino acid sequence shares 34% identity with that of arylesterase from Acinetobacter sp. strain ADP1. Furthermore, we successfully expressed active recombinant S. solfataricus arylesterase in Escherichia coli. Together, our results show that the enzyme is a serine esterase belonging to the A-esterases and contains a catalytic triad composed of Ser156, Asp251, and His281 in the active site.     

Newly Identified Thermostable Esterase from Sulfobacillus acidophilus: Properties and Performance in Phthalate Ester Degradation

EstS1, a newly identified thermostable esterase from Sulfobacillus acidophilus DSM10332, was heterologously expressed in Escherichia coli and shown to enzymatically degrade phthalate esters (PAEs) to their corresponding monoalkyl PAEs. The optimal pH and temperature of the esterase were found to be 8.0 and 70°C, respectively. The half-life of EstS1 at 60°C was 15 h, indicating that the enzyme had good thermostability. The specificity constant (k_cat/K_m) of the enzyme for p-nitrophenyl butyrate was as high as 6,770 mM⁻¹ s⁻¹. The potential value of EstS1 was demonstrated by its ability to effectively hydrolyze 35 to 82% of PAEs (10 mM) within 2 min at 37°C, with all substrates being completely degraded within 24 h. At 60°C, the time required for complete hydrolysis of most PAEs was reduced by half. To our knowledge, this enzyme is a new esterase identified from thermophiles that is able to degrade various PAEs at high temperatures.     

Lipoate protein ligase B primarily recognizes the C8-phosphopantetheine arm of its donor substrate and weakly binds the acyl carrier protein

Lipoic acid is a sulfur-containing cofactor indispensable for the function of several metabolic enzymes. In microorganisms, lipoic acid can be salvaged from the surroundings by lipoate protein ligase A (LplA), an ATP-dependent enzyme. Alternatively, it can be synthesized by the sequential actions of lipoate protein ligase B (LipB) and lipoyl synthase (LipA). LipB takes up the octanoyl chain from C₈-acyl carrier protein (C₈-ACP), a byproduct of the type II fatty acid synthesis pathway, and transfers it to a conserved lysine of the lipoyl domain of a dehydrogenase. However, the molecular basis of its substrate recognition is still not fully understood. Using Escherichia coli LipB as a model enzyme, we show here that the octanoyl-transferase mainly recognizes the 4′-phosphopantetheine-tethered acyl-chain of its donor substrate and weakly binds the apo-acyl carrier protein. We demonstrate LipB can accept octanoate from its own ACP and noncognate ACPs, as well as C₈-CoA. Furthermore, our ¹H saturation transfer difference and ³¹P NMR studies demonstrate the binding of adenosine, as well as the phosphopantetheine arm of CoA to LipB, akin to binding to LplA. Finally, we show a conserved ⁷¹RGG⁷³ loop, analogous to the lipoate-binding loop of LplA, is required for full LipB activity. Collectively, our studies highlight commonalities between LipB and LplA in their mechanism of substrate recognition. This knowledge could be of significance in the treatment of mitochondrial fatty acid synthesis related disorders.     

Low-Temperature Lipase from Psychrotrophic Pseudomonas sp. Strain KB700A

We have previously reported that a psychrotrophic bacterium, Pseudomonas sp. strain KB700A, which displays sigmoidal growth even at −5°C, produced a lipase. A genomic DNA library of strain KB700A was introduced into Escherichia coli TG1, and screening on tributyrin-containing agar plates led to the isolation of the lipase gene. Sequence analysis revealed an open reading frame (KB-lip) consisting of 1,422 nucleotides that encoded a protein (KB-Lip) of 474 amino acids with a molecular mass of 49,924 Da. KB-Lip showed 90% identity with the lipase from Pseudomonas fluorescens and was found to be a member of Subfamily I.3 lipase. Gene expression and purification of the recombinant protein were performed. KB-Lip displayed high lipase activity in the presence of Ca²⁺. Addition of EDTA completely abolished lipase activity, indicating that KB-Lip was a Ca²⁺-dependent lipase. Addition of Mn²⁺ and Sr²⁺ also led to enhancement of lipase activity but to a much lower extent than that produced by Ca²⁺. The optimal pH of KB-Lip was 8 to 8.5. The addition of detergents enhanced the enzyme activity. When p-nitrophenyl esters and triglyceride substrates of various chain-lengths were examined, the lipase displayed highest activity towards C₁₀ acyl groups. We also determined the positional specificity and found that the activity was 20-fold higher toward the 1(3) position than toward the 2 position. The optimal temperature for KB-Lip was 35°C, lower than that for any previously reported Subfamily I.3 lipase. The enzyme was also thermolabile compared to these lipases. Furthermore, KB-Lip displayed higher levels of activity at low temperatures than did other enzymes from Subfamily I.3, indicating that KB-Lip has evolved to function in cold environments, in accordance with the temperature range for growth of its psychrotrophic host, strain KB700A.     

Ethylene Removal at Low Temperatures under Biofilter and Batch Conditions

Removal of the plant hormone ethylene (C₂H₄) is often required by horticultural storage facilities, which are operated at temperatures below 10°C. The aim of this study was to demonstrate an efficient, biological C₂H₄ removal under such low-temperature conditions. Peat-soil, acclimated to degradation of C₂H₄, was packed in a biofilter (687 cm³) and subjected to an airflow (~73 ml min⁻¹) with 2 ppm (μl liter⁻¹) C₂H₄. The C₂H₄ removal efficiencies achieved at 20, 10, and 5°C, respectively, were 99.0, 98.8, and 98.4%. This corresponded to C₂H₄ levels of 0.022 to 0.032 ppm in the biofilter outlet air. At 2°C, the average C₂H₄ removal efficiency dropped to 83%. The detailed temperature response of C₂H₄ removal was tested under batch conditions by incubation of 1-g soil samples in a temperature gradient ranging from 0 to 29°C with increments of 1°C. The C₂H₄ removal rate was highest at 26°C (0.85 μg of C₂H₄ g [dry weight]⁻¹ h⁻¹), but remained at levels of 0.14 to 0.28 μg of C₂H₄ g (dry weight)⁻¹ h⁻¹ at 0 to 10°C. At 35 to 40°C, the C₂H₄ removal rate was negligible (0.02 to 0.06 μg of C₂H₄ g [dry weight]⁻¹ h⁻¹). The Q₁₀ (i.e., the ratio of rates 10°C apart) for C₂H₄ removal was 1.9 for the interval 0 to 10°C. In conclusion, the present results demonstrated microbial C₂H₄ removal, which proceeded at 0 to 2°C and produced a moderately psychrophilic temperature response.     

Thermostable Amylolytic Enzymes from a New Clostridium Isolate

A new Clostridium strain was isolated on starch at 60°C. Starch, pullulan, maltotriose, and maltose induced the synthesis of α-amylase and pullulanase, while glucose, ribose, fructose, and lactose did not. The formation of the amylolytic enzymes was dependent on growth and occurred predominantly in the exponential phase. The enzymes were largely cell bound during growth of the organism with 0.5% starch, but an increase of the starch concentration in the growth medium was accompanied by the excretion of α-amylase and pullulanase into the culture broth; but also by a decrease of total activity. α-Amylase, pullulanase, and α-glucosidase were active in a broad temperature range (40 to 85°C) and displayed temperature optima for activity at 60 to 70°C. During incubation with starch under aerobic conditions at 75°C for 2 h, the activity of both enzymes decreased to only 90 or 80%. The apparent K_m values of α-amylase, pullulanase, and α-glucosidase for their corresponding substrates, starch, pullulan, and maltose were 0.35 mg/ml, 0.63 mg/ml, and 25 mM, respectively.     

Gene Cloning, Purification, and Characterization of a Phosphodiesterase from Delftia acidovorans

A novel phosphodiesterase (PdeA) was purified from Delftia acidovorans, the gene encoding the enzyme was cloned and expressed in Escherichia coli, and the recombinant enzyme was purified to apparent homogeneity and characterized. PdeA is an 85-kDa trimer that exhibits maximal activity at 65°C and pH 10 even though it was isolated from a mesophilic bacterium. Although PdeA exhibited both mono- and diesterase activity, it was most active on the phosphodiester bis(p-nitrophenyl)phosphate with a K_m of 2.9 ± 0.1 mM and a k_cat of 879 ± 73 min⁻¹. The enzyme showed sequence similarity to cyclic AMP (cAMP) phosphodiesterase and cyclic nucleotide phosphodiesterases and exhibited activity on cAMP in vivo when the gene was expressed in E. coli. The IS1071 transposon insertion sequence was found downstream of pdeA.     

Cloning and Expression of Phytase appA Gene from Shigella sp. CD2 in Pichia pastoris and Comparison of Properties with Recombinant Enzyme Expressed in E. coli

The phytase gene appA_S was isolated from Shigella sp. CD2 genomic library. The 3.8 kb DNA fragment contained 1299 bp open reading frame encoding 432 amino acid protein (AppA_S) with 22 amino acid signal peptide at N-terminal and three sites of N-glycosylation. AppA_S contained the active site RHGXRXP and HDTN sequence motifs, which are conserved among histidine acid phosphatases. It showed maximum identity with phytase AppA of Escherichia coli and Citrobacter braakii. The appA_S was expressed in Pichia pastoris and E. coli to produce recombinant phytase rAppA_P and rAppA_E, respectively. Purified glycosylated rAppA_P and nonglycosylated rAppA_E had specific activity of 967 and 2982 U mg^-1, respectively. Both had pH optima of 5.5 and temperature optima of 60°C. Compared with rAppA_E, rAppA_P was 13 and 17% less active at pH 3.5 and 7.5 and 11 and 18% less active at temperature 37 and 50°C, respectively; however, it was more active at higher incubation temperatures. Thermotolerance of rAppA_P was 33% greater at 60°C and 24% greater at 70°C, when compared with rAppA_E. Both the recombinant enzymes showed high specificity to phytate and resistance to trypsin. To our knowledge, this is the first report on cloning and expression of phytase from Shigella sp.     

Phenotypical temperature adaptation of protein turnover in desert annuals

Protein synthesis and protein degradation rates were measured in three desert annual species at four different experimental temperatures. The taxa chosen for this study were the C₃ winter annuals, Bowlesia incana Ruiz & Pavon and Plantago insularis Eastw., and a C₄ summer annual, Atriplex elegans (Moq.) D. Dietr. Peak rates of protein synthesis correlated well with the preferred habitat temperatures of B. incana and A. elegans; optima occurred at 25 and 35°C, respectively. Plants of P. insularis showed an optimum protein synthesis rate at 35°C; however, this optimum rate was considerably lower than for the other two species. Higher activation energies for protein synthesis tended to parallel adaptation to higher temperature habitats. Responses of protein degradation to temperature in A. elegans and B. incana were consistent with their natural thermal regimes, when evaluated for the transition from 25 to 35°C. Again, protein degradation in P. insularis shows an intermediate response to temperature during the 25 to 35°C transition.     

Phanerochaete chrysosporium β-Glucosidases: Induction, Cellular Localization, and Physical Characterization

Phanerochaete chrysosporium produces intracellular soluble and particulate β-glucosidases and an extracellular β-glucosidase. The extracellular enzyme is induced by cellulose but repressed in the presence of glucose. The molecular weight of this enzyme is 90,000. The K_m for p-nitrophenyl-β-glucoside is 1.6 × 10⁻⁴ M; the K_i for glucose, a competitive inhibitor, is 5.0 × 10⁻⁴ M. The K_m for cellobiose is 5.3 × 10⁻⁴ M. The intracellular soluble enzyme is induced by cellobiose; this induction is prevented by cycloheximide. The presence of 300 mM glucose in the medium, however, had no effect on induction. The K_m for p-nitrophenyl-β-glucoside is 1.1 × 10⁻⁴ M. The molecular weight of this enzyme is ~410,000. Both enzymes have an optimal temperature of 45°C and an E_act of 9.15 kcal (ca. 3.83 × 10⁴ J). The pH optima, however, were ~7.0 and 5.5 for the intracellular and extracellular enzymes, respectively.     

Production by Streptomyces viridosporus T7A of an Enzyme Which Cleaves Aromatic Acids from Lignocellulose

The lignocellulose-degrading actinomycete Streptomyces viridosporus T7A produced an extracellular esterase when grown in a mineral salts-yeast extract medium. Extracellular esterase activity was first detected during the late stationary phase and typically followed the appearance of intracellular activity. When the organism was grown in lignocellulose-supplemented medium, esterase activity was not increased, but lignocellulose-esterified p-coumaric acid and vanillic acid were released into the medium. Polyacrylamide gels showed that several extracellular esterases differing in substrate specificity were produced. Ultrafiltration was used to concentrate the esterase prior to purification. Activity was recovered mostly in the molecular weight fraction between 10,000 and 100,000. Concentrated esterase was further purified by DEAE-Sepharose anion-exchange chromatography to a specific activity 11.82 times greater than that in the original supernatant. There were seven detectable esterase active proteins in the partially purified enzyme solution. Three were similar esterases that may be isoenzymes. The partially purified esterase had a pH optimum for activity of 9.0, a temperature optimum of 45 to 50°C, and a K_m and V_max of 0.030 mM and 0.097 μmol/min per ml, respectively, when p-nitrophenyl butyrate was the substrate. The enzyme was unstable above 40°C but retained activity when stored at 4 or −20°C. It lost some activity (20%) when lyophilized. Substrate specificity assays showed that it hydrolyzed ester linkages of p-nitrophenyl butyrate, α-naphthyl acetate, α-naphthyl butyrate, and lignocellulose. Vanillic and p-coumaric acids were identified as products released from lignocellulose. The enzyme is thought to be a component of the lignocellulose-degrading enzyme system of S. viridosporus.     

Thermophilic Sulfate Reduction in Hydrothermal Sediment of Lake Tanganyika, East Africa

In environments with temperatures above 60°C, thermophilic prokaryotes are the only metabolically active life-forms. By using the ³⁵SO₄^2- tracer technique, we studied the activity of sulfate-reducing microorganisms (SRM) in hot sediment from a hydrothermal vent site in the northern part of freshwater Lake Tanganyika (East Africa). Incubation of slurry samples at 8 to 90°C demonstrated meso- and thermophilic sulfate reduction with optimum temperatures of 34 to 45°C and 56 to 65°C, respectively, and with an upper temperature limit of 80°C. Sulfate reduction was stimulated at all temperatures by the addition of short-chain fatty acids and benzoate or complex substrates (yeast extract and peptone). A time course experiment showed that linear thermophilic sulfate consumption occurred after a lag phase (12 h) and indicated the presence of a large population of SRM in the hydrothermal sediment. Thermophilic sulfate reduction had a pH optimum of about 7 and was completely inhibited at pH 8.8 to 9.2. SRM could be enriched from hydrothermal chimney and sediment samples at 60 and 75°C. In lactate-grown enrichments, sulfide production occurred at up to 70 and 75°C, with optima at 63 and 71°C, respectively. Several sporulating thermophilic enrichments were morphologically similar to Desulfotomaculum spp. Dissimilatory sulfate reduction in the studied hydrothermal area of Lake Tanganyika apparently has an upper temperature limit of 80°C.     

A study of lipid bilayer membrane stability using precise measurements of specific capacitance

A method is described for measuring the specific capacitance (C_m) of lipid bilayer membranes with an estimated experimental error of only 1%. The gross capacitance was measured with an AC Wheatstone bridge and a photographic technique was used to determine the area of thin membrane. The results of measurements on oxidized cholesterol-decane membranes formed in 1 × 10^-2 M KCl show that C_m depends upon temperature, voltage, time, and the age of the bulk membrane solutions. For a freshly thinned membrane (from 5 week old solution), C_m increases exponentially from an initial value of 0.432 ±0.021 (SD) μF/cm² with a time constant of ~15 min. A 100 mv potential applied across the membrane for 10-20 min prior to making measurements eliminated this time dependence and produced final-state membranes. C_m of final-state membranes depends upon applied voltage (V_a) and obeys the equation C_m = C₀ + βV_a² where V_a V_DC + V^rms_AC. C₀ and β depend upon temperature; C₀ decreases linearly with temperature while β increases linearly. At 20°C, C₀ = 0.559 ±0.01 (SD) μF/cm² and β = 0.0123 ±0.0036 (SD) (μF/cm²)/(mv²) and at 34°C, C₀ = 0.472 ±0.01 and β = 0.0382 ±0.0039. These variations in C_m are interpreted as resulting from thickness changes. The possibility that they result from diffuse layer and/or membrane dielectric phenomena is discussed and found to be unlikely. The results are discussed in terms of membrane stability by constructing hypothetical potential energy vs. thickness curves.     

Phosphoenolpyruvate synthetase from the hyperthermophilic archaeon Pyrococcus furiosus

Phosphoenolpyruvate synthetase (PpsA) was purified from the hyperthermophilic archaeon Pyrococcus furiosus. This enzyme catalyzes the conversion of pyruvate and ATP to phosphoenolpyruvate (PEP), AMP, and phosphate and is thought to function in gluconeogenesis. PpsA has a subunit molecular mass of 92 kDa and contains one calcium and one phosphorus atom per subunit. The active form has a molecular mass of 690 ± 20 kDa and is assumed to be octomeric, while approximately 30% of the protein is purified as a large (~1.6 MDa) complex that is not active. The apparent K_m values and catalytic efficiencies for the substrates pyruvate and ATP (at 80°C, pH 8.4) were 0.11 mM and 1.43 × 10⁴ mM⁻¹ · s⁻¹ and 0.39 mM and 3.40 × 10³ mM⁻¹ · s⁻¹, respectively. Maximal activity was measured at pH 9.0 (at 80°C) and at 90°C (at pH 8.4). The enzyme also catalyzed the reverse reaction, but the catalytic efficiency with PEP was very low [k_cat/K_m = 32 (mM · s)⁻¹]. In contrast to several other nucleotide-dependent enzymes from P. furiosus, PpsA has an absolute specificity for ATP as the phosphate-donating substrate. This is the first PpsA from a nonmethanogenic archaeon to be biochemically characterized. Its kinetic properties are consistent with a role in gluconeogenesis, although its relatively high cellular concentration (~5% of the cytoplasmic protein) suggests an additional function possibly related to energy spilling. It is not known whether interconversion between the smaller, active and larger, inactive forms of the enzyme has any functional role.     

Production and Purification of Extracellular D-Xylose Isomerase from an Alkaliphilic, Thermophilic Bacillus sp.

An alkaliphilic, thermophilic Bacillus sp. (NCIM 59) produced extracellular xylose isomerase at pH 10 and 50°C by using xylose or wheat bran as the carbon source. The distribution of xylose isomerase as a function of growth in comparison with distributions of extra- and intracellular marker enzymes such as xylanase and β-galactosidase revealed that xylose isomerase was truly secreted as an extracellular enzyme and was not released because of sporulation or lysis. The enzyme was purified to homogeneity by ammonium sulfate precipitation followed by gel filtration, preparative polyacrylamide gel electrophoresis, and ion-exchange chromatography. The molecular weight of xylose isomerase was estimated to be 160,000 by gel filtration and 50,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, indicating the presence of three subunits. The enzyme is most active at pH 8.0 and with incubation at 85°C for 20 min. Divalent metal ions Mg²⁺, Co²⁺, and Mn²⁺ were required for maximum activity of the enzyme. The K_m values for D-xylose and D-glucose at 80°C and pH 7.5 were 6.66 and 142 mM, respectively, while K_cat values were 2.3 × 10² s^-1 and 0.5 × 10² s^-1, respectively.     

Purification and Partial Characterization of a Prolyl-Dipeptidyl Aminopeptidase from Lactobacillus helveticus CNRZ 32

X-prolyl-dipeptidyl aminopeptidase, which hydrolyzed Gly-Pro-p-nitroanilide (relative activity [RA] = 100%) and Arg-Pro-p-nitroanilide (RA, 130%), was purified to homogeneity from the cell extract of Lactobacillus helveticus CNRZ 32. The enzyme also hydrolyzed Ala-Pro-Gly (RA, 11%) and Ala-Ala-p-nitroanilide (RA, 2%) but was not active on Ala-Leu-Ala, dipeptides, and endopeptidase and carboxypeptidase substrates. The enzyme was purified 145-fold by streptomycin sulfate precipitation, ammonium sulfate fractionation, and a series of column chromatographies on DEAE-cellulose, arginine-Sepharose 4B, and glycyl-prolyl-AH-Sepharose 4B. The purified enzyme appeared as a single band on native polyacrylamide gel and sodium dodecyl sulfate-polyacrylamide gel electrophoreses and had a molecular weight of 72,000. Optima for activity by the purified enzyme were pH 7.0 and 40°C. The enzyme was incubated at 40°C for 15 min with various metal ions. It was activated by Mg²⁺ (2.5 mM), Ca²⁺ (0.1 to 2.5 mM), Na⁺ (10 to 50 mM), and K⁺ (10 to 50 mM) and was inhibited by Hg²⁺ (0.1 to 2.5 mM), Cu²⁺ (0.1 to 2.5 mM), and Zn²⁺ (0.1 to 2.5 mM). Enzyme activity was partially inhibited by EDTA (1.0 mM, 20 h at 40°C), 1,10-phenanthroline (1.0 mM, 15 min at 40°C), phenylmethylsulfonyl fluoride (1.0 mM), N-ethylmaleimide (1.0 mM), and iodoacetate (1.0 mM). It was completely inhibited by diisopropyl fluorophosphate (1.0 mM, 2 h at 40°C) and p-chloromercuribenzoate (1.0 mM, 15 min at 40°C). The enzyme was not affected by dithioerythritol (1.0 to 10 mM).