Syntheses of α-D-glucosyl-D-fructoses by use of a reversed hydrolysis activity of α-glucosidase

Summary -D-Glucosyl-D-fructoses were synthesized by use of a reversed hydrolysis activity of -glucosidase fromSaccharomyces sp. Although -D-glucosyl-(1–1)-D-fructose was synthesized predominantly by the incubation of D-glucose solution in the presence of -glucosidase (batch method reaction), -(1–4)-linked disaccharide was a major product in a procedure by use of an immobilized -glucosidase column and an activated carbon column (column method reaction).     

Rapid protein fold determination using secondary chemical shifts and cross-hydrogen bond 15N-13C′ scalar couplings (3hbJNC′)

The possibility of generating protein folds at the stage of backbone assignment using structural restraints derived from experimentally measured cross-hydrogen bond scalar couplings and secondary chemical shift information is investigated using as a test case the small / protein chymotrypsin inhibitor 2. Dihedral angle restraints for the and angles of 32 out of 64 residues could be obtained from secondary chemical shift analysis with the TALOS program (Corneliscu et al., 1999a). This information was supplemented by 18 hydrogen-bond restraints derived from experimentally measured cross-hydrogen bond ^3hbJ_NC coupling constants. These experimental data were sufficient to generate structures that are as close as 1.0 Å backbone rmsd from the crystal structure. The fold is, however, not uniquely defined and several solutions are generated that cannot be distinguished on the basis of violations or energetic considerations. Correct folds could be identified by combining clustering methods with knowledge-based potentials derived from structural databases.     

Hexahydroindanone derivatives of steroids formed by Rhodococcus equi

Summary A mutant strain of Rhodococcus equi accumulates three metabolites from the androst-4-ene-3,17-dione or from its degradation intermediate, 3a-H-4(3'-propionic acid)-7a-methylhexahydro-1,5-indanedione (MEPHIP). These three metabolites are: 3a-H-4a(3'-propionic acid)-5-hydroxy-7a-methylhexahydro-1-indanone--lactone (HIL); 3a-H-4(3'-trans acrylic acid)-5-hydroxy-7a-methylhexahydro-1-indanone (^2'-5-hydroxy-MEPHIP); and 3a-H-4(3'-hydroxy-3'-propionic acid)-5-hydroxy-7a-methylhexahydro-1-indanone (3'-hydroxy-HIL). The behaviour of this mutant allows us to propose a pathway for degradation of the intermediates, methylperhydroindanone propionates. However, during this degradation, the side-chain propionate was eliminated by a-oxidation mechanism. Offprint requests to: A. Miclo     

Exact solutions for chemical bond orientations from residual dipolar couplings

New methods for determining chemical structures from residual dipolar couplings are presented. The fundamental dipolar coupling equation is converted to an elliptical equation in the principal alignment frame. This elliptical equation is then combined with other angular or dipolar coupling constraints to form simple polynomial equations that define discrete solutions for the unit vector(s). The methods are illustrated with residual dipolar coupling data on ubiquitin taken in a single anisotropic medium. The protein backbone is divided into its rigid groups (namely, its peptide planes and C frames), which may be solved for independently. A simple procedure for recombining these independent solutions results in backbone dihedral angles and that resemble those of the known native structure. Subsequent refinement of these - angles by the ROSETTA program produces a structure of ubiquitin that agrees with the known native structure to 1.1 Å C rmsd.     

Complete protein structure determination using backbone residual dipolar couplings and sidechain rotamer prediction

Residual dipolar couplings provide significant structural information for proteins in the solution state, which makes them attractive for the rapid determination of protein structures. While dipolar couplings contain inherent structural ambiguities, these can be reduced via an overlap similarity measure that insists that protein fragments assigned to overlapping regions of the sequence must have self-consistent structures. This allows us to determine a backbone fold (including the correct C–C bond orientations) using only residual dipolar coupling data from one ordering medium. The resulting backbone structures are of sufficient quality to allow for modeling of sidechain rotamer states using a rotamer prediction algorithm and a force field employing the Surface Generalized Born continuum solvation model. We demonstrate the applicability of the method using experimental data for ubiquitin. These results illustrate the synergies that are possible between protein structural database and molecular modeling methods and NMR spectroscopy, and we expect that the further development of these methods will lead to the extraction of high resolution structural information from minimal NMR data.     

Measurement of one-bond 1Hα-13Cα couplings in backbone-labelled proteins

NMR dipole-dipole couplings between protein backbone nuclei (¹H, ¹³C, ¹⁵N, ¹H^N,¹³C) offer enormous scope for the rapid determination of protein global folds. Here, we show that measurement of one-bond splittings in the protein backbone is facilitated by use of protein that is selectively isotopically enriched only in the backbone atoms. In particular, ¹H-¹³C couplings can be measured simply and with high sensitivity by use of conventional heteronuclear single quantum correlation (HSQC) techniques.     

An HNCO-based Pulse Scheme for the Measurement of 13Cα-1Hα One-bond Dipolar couplings in 15N, 13C Labeled Proteins

A triple resonance pulse scheme is presented for recording 13C-1H one-bond dipolar couplings in 15N, 13C labeled proteins. HNCO correlation maps are generated where the carbonyl chemical shift is modulated by the 13C-1H coupling, with the two doublet components separated into individual data sets. The experiment makes use of recently described methodology whereby the protein of interest is dissolved in a dilute solution of bicelles which orient above a critical temperature, thus permitting measurement of significant couplings (Tjandra and Bax, 1997a). An application to the protein ubiquitin is described.     

Amino acid-directed nucleic acid synthesis

Summary The fact that proteins contain onlya-amino acids and that protein structure is determined by 3 5 linked ribonucleotides is postulated to be the result of the copolymerization of these molecules in the prebiotic environment. Ribonucleotides therefore represent partial degradation products and proteins represent a side reaction developing from copolymerization. The basic structural unit of copolymerization is a nucleotide substituted with an amino acid at the 2 position. Characteristics of modern amino and ribonucleic acid structure are all consistent with and necessary for this hypothesis. The characteristics and individual base assignments of the code also provide strong support for origin from the postulated copolymers. All characteristics of the code can be accounted for by this single hypothesis.An Established Investigator of the American Heart Association     

Determination of protein global folds using backbone residual dipolar coupling and long-range NOE restraints

We report the determination of the global fold of human ubiquitin using protein backbone NMR residual dipolar coupling and long-range nuclear Overhauser effect (NOE) data as conformational restraints. Specifically, by use of a maximum of three backbone residual dipolar couplings per residue (N_i-H^N _i, N_i-C_i–1, H^N _i - C_i–1) in two tensor frames and only backbone H^N-H^N NOEs, a global fold of ubiquitin can be derived with a backbone root-mean-square deviation of 1.4 Å with respect to the crystal structure. This degree of accuracy is more than adequate for use in databases of structural motifs, and suggests a general approach for the determination of protein global folds using conformational restraints derived only from backbone atoms.     

Identification and characterization of the functional alpha origin of DNA replication of the R6K plasmid and its relatedness to the R6K beta and gamma origins

Summary The functional R6K origin is composed of two DNA elements, one of 580 bp carrying the origin sequences and the other of 277 bp containing the seven 22 bp direct repeats previosly identified as also required for and origin activity. These two genetic elements are separated by approximately 3,000 bp of R6K sequences which are dispensable for origin activity. The function of the origin depends on the presence in cis of the 580 bp and the 277 bp fragments and requires that they be oriented as in the intact R6K. Activation of the origin depends on the R6K replication initiation protein .Within the 580 bp of the origin, there is a sequence of 98 bp which appears as an inverted repeat of 96 bp in the replicon. Deletion of the 96 bp or 98 bp results in inactivation of the and the origins respectively. These long repeats are palindromic and it is suggested that these may serve as the recognition signals for initiation of DNA replication in the and the origins of R6K. DNA homology analysis performed on , and origin sequences, also reveals 10–23 bp sequences in the and the origins that are related to the family of 22 bp direct repeats in the origin which were shown previously to be binding sites for the protein.     

Calculations of NMR dipolar coupling strengths in model peptides

Ab initio MP2 and density functional quantum chemistry calculations are used to explore geometries and vibrational properties of N-methylacetamide and of the alanine dipeptide with backbone angles characteristic of helix and sheet regions in proteins. The results are used to explore one-bond direct dipolar couplings for the N–H, C–H, C–N, and C–C bonds, as well as for the two-bond C–H interaction. Vibrational averaging affects these dipolar couplings, and these effects can be expressed as effective bond lengths that are 0.5–3% larger than the true bond lengths; bending and torsion vibrations have a bigger influence on the effective coupling than do stretching vibrations. Because of zero-point motion, these effects are important even at low temperature. Hydrogen bonding interactions at the amide group also increase the N-H effective bond length. Although vibrational contributions to effective bond lengths are small, they can have a significant influence on the extraction of order parameters from relaxation data, and a knowledge of relative bond lengths is needed when several types of dipolar couplings are to be simultaneously used for refinement. The present computational results are compared to both solid- and liquid-state NMR experiments. The analysis suggests that secondary structural elements in many proteins may be more rigid than is commonly thought.     

Intracellular sites of the synthesis of sweet potato mitochondrial F1ATPase subunits

Summary Five subunits (-, -, -, - and -subunits) of the six -and -subunits) in the F₁ portion (F₁ATPase) of sweet potato (Ipomoea batatas) mitochondrial adenosine triphosphatase were isolated by an electrophoretic method. The - and -subunits were not distinguishable immunologically but showed completely different tryptic peptide maps, indicating that they were different molecular species. In vitro protein synthesis with isolated sweet potato root mitochondria produced only the -subunit when analyzed with anti-sweet potato F₁ATPase antibody reacting with all the subunits except the -subunit. Sweet potato root poly(A)⁺RNA directed the synthesis of six polypeptides which were immunoprecipitated by the antibody: two of them immunologically related to the -subunit and the others to the - and -subunits. We conclude that the -subunit of the F₁ATPase is synthesized only in the mitochondria and the -, - and -subunits are in the cytoplasm.     

A Sensitive Pulse Scheme for Measuring the Backbone Dihedral Angle ψ Based on Cross-correlation Between 13Cα-1Hα Dipolar and Carbonyl Chemical Shift Anisotropy Relaxation Interactions

A pulse scheme for measuring cross-correlation between 13C-1H dipolar and carbonyl chemical shift anisotropy relaxation mechanisms is presented from which the protein backbone dihedral angle is measured. The method offers significant sensitivity gains relative to our recently published scheme for measuring based on this cross-correlation effect [Yang et al. (1997) J. Am. Chem. Soc., 119, 11938-11940]. The utility of the method is demonstrated with an application to a 42 kDa complex of 15N,13C-labeled maltose binding protein and -cyclodextrin.     

Comparative residual toxicities of pesticides to the predator Agistemus industani (Acari: Stigmaeidae) on citrus in Florida

Residual toxicities of registered and selected experimental pesticides used on citrus against Agistemus industani Gonzalez (Acari: Stigmaeidae) were compared. Pesticides considered highly toxic to A. industani were: abamectin 0.15 EC at 731ml/ha+FC 435-66 petroleum oil at 46.8l/ha, pyridaben 75WP at 469g/ha, ethion 4EC at 7.01l/ha+FC 435-66 petroleum oil at 46.8l/ha, propargite 6.55 EC at 3.51l/ha, chlorfenapyr 2SC at 1.46l/ha applied alone or in combination with FC 435-66 petroleum oil at 46.8l/ha, sulphur 80DF at 16.81kg/ha, dicofol 4EC at 7.01l/ha, fenbutatin oxide 50WP at 2.24kg/ha, benomyl 50WP at 2.24kg/ha, benomyl 50WP at 1.68kg/ha+ferbam 76 GF at 5.60kg/ha, ferbam 76GF at 11.21kg/ha, neem oil 90EC at 46.8l/ha, and copper hydroxide DF (40% metallic copper) at 4.48kg metallic copper/ha+FC 435-66 petroleum oil at 46.8l/ha. Pesticides that were moderately to slightly toxic included: copper sulphate 98% at 4.48kg metallic copper/ha+FC 435-66 petroleum oil at 46.8l/ha, fenbuconazole 2F at 280ml/ha+FC 435-66 petroleum oil at 46.8l/ha, FC 435-66 petroleum oil applied alone at 46.8l/ha or 23.4l/ha, and diflubenzuron 25WP at 1.40kg/ha. Pesticides that were non-toxic included: fenbuconazole 2F at 585ml/ha, malathion 57EC at 5.85l/ha, FC 435-66 petroleum oil at 46.8l/ha, carbaryl 80S at 3.36kg/ha, chlorpyrifos 4EC at 4.68l/ha, and formetanate 92SP at 1.12kg/ha. Understanding the toxic effects of field weathered pesticides against key predacious mite species is important for effective IPM. The results of this study provide a comparison of direct and indirect toxic effects of various pesticides to A. industani under field conditions.     

Identification of a positive regulatory protein in Escherichia coli: the product of the cysB gene

Summary From the specialized transducing bacteriophage cysB, recombinant phages cysB242 and cysB257 have been obtained, each of which carries an amber mutation in the cysB cistron. A comparison of polyacrylamide gel electrophoretic profiles of labelled extracts from uv-irradiated bacteria that had been infected with cysB ⁺ or with cysB-amber phages, led to the identification of a 39,000-dalton polypeptide as the product of the cysB gene. The native protein was purified to near radiochemical purity and was found to be an oligomer with an isoelectric point close to pH 7.     

Effect of androgens on histochemical fibre type

Summary The temporal muscles of the guinea pig show a sexual differentiation reflected in their histochemical enzyme pattern. Using histochemical methods for mitochondrial (SDH, -GPDH), and glycolytic enzymes (phosphorylase, LDH) it could be shown, that in adult animals the male muscle is a white muscle with marked activity of glycolytic enzymes, the female muscle a red muscle displaying high activity of mitochondrial enzymes. This differential enzyme pattern can be converted by the application of testosterone to the female type during the postnatal development. The male sex hormone thus affects the histochemical enzyme pattern of the muscle, converting the red, female into a white, male muscle in the female guinea pig.     

Cytoplasmic male sterility in barley

Summary The effect of the msm1 cytoplasm of barley (Hordeum vulgare L.) on kernel protein and lysine was studied using the near-isogenic, unrestored derivatives of seven barley varieties. With normal lysine varieties, Adorra, Bomi, CI 4362, and Hankkija's Eero, the msm1 cytoplasm produced an average of one percentage point more protein than did the normal cytoplasm of the same varieties. There was no difference between the two cytoplasms with respect to their effect on the lysine content. With high lysine varieties, Bomi Risø mutant 13, Bomi Risø mutant 1508, and CI 3947, msm1 produced almost one percentage point more protein but protein with a somewhat decreased lysine content.Induced partial spike fertility in normal Adorra was found to be associated with lysine in meal (r=–0.999), with protein in meal (r=–0.984), and with lysine in protein (r=0.941). Removal of the spikes on the secondary tillers affected both the protein and its lysine content. It is suggested that good spike fertility is an important pre-requisite when selecting high lysine and/or high protein segregants or mutants.     

Quantitative conformational analysis of the core region of N-glycans using residual dipolar couplings, aqueous molecular dynamics, and steric alignment

A method is described for quantitatively investigating the dynamic conformation of small oligosaccharides containing an (16) linkage. It was applied to the oligosaccharide Man-(13) {Man- (16)}Man--O-Me, which is a core region frequently observed in N-linked glycans. The approach tests an aqueous molecular dynamics simulation, capable of predicting microscopic dynamics, against experimental residual dipolar couplings, by assuming that alignment is caused purely by steric hindrance. The experimental constraints were heteronuclear and homonuclear residual dipolar couplings, and in particular those within the (16) linkage itself. Powerful spin-state-selective pulse sequences and editing schemes were used to obtain the most relevant couplings for testing the model. Molecular dynamics simulations in water over a period of 50 ns were not able to predict the correct rotamer population at the (16) linkage to agree with the experimental data. However, this sampling problem could be corrected using a simple maximum likelihood optimisation, indicating that the simulation was modelling local dynamics correctly. The maximum likelihood prediction of the residual dipolar couplings was found to be an almost equal population of the gg and gt rotamer conformations at the (16) linkage, and the tg conformation was predicted to be unstable and unpopulated in aqueous solution. In this case all twelve measured residual dipolar couplings could be satisfied. This conformer population could also be used to make predictions of scalar couplings with the use of a previously derived empirical equation, and is qualitatively in agreement with previous predictions based on NMR, X-ray crystallography and optical data.     

Transformation of 16-dehydroprogesterone and 17α-hydroxyprogesterone by Mucor piriformis

Mucor piriformis was used to study the mode of transformation of 16-dehydroprogesterone (I, pregna-4, 16-diene-3, 20-dione) and 17-hydroxyprogesterone (II, 17-hydroxypregn-4-ene-3, 20-dione). Biotransformation products formed from I were 14-hydroxypregna-4, 16-diene-3, 20-dione (Ia), 7, 14-dihydroxypregna-4, 16-diene-3, 20-dione (Ib), 3, 7, 14-trihydroxy-5-pregn-16-en-20-one (Ic), and 3, 7, 14-trihydroxy-5-pregn-16-en-20-one (Id). Metabolites Ic and Id appear to be hitherto unknown. Time-course studies suggested that the transformation is initiated by hydroxylation at the 14-position (Ia) followed by hydroxylation at the 7-position (Ib). Microsomes (105,000 g sediment) prepared from 16-dehydroprogesterone-induced cells hydroxylate I to its 14-hydroxy derivative (Ia) in the presence of NADPH. Incubation of Ia with the organism resulted in the formation of Ib, Ic and Id. Biotransformation products formed from compound II were 17, 20-dihydroxypregn-4-en-3-one (IIa), 7, 17-dihydroxypregn-4-ene-3, 20-dione (IIb), 6, 17, 20-trihydroxypregn-4-en-3-one (IIc) and 11, 17, 20-trihydroxypregn-4-en-3-one (IId). Time-course studies indicated that IIa is the initial product formed, which is further hydroxylated either at the 6 or 11 position. Incubation of IIa with the organism resulted in the formation of IIc and IId. Reduction of the 4-en-3-one system and 20-keto group has not been observed before in organisms of the order Mucorales. In addition, M. piriformis has been shown to carry out hydroxylation at the C-6, C-7, C-11 and C-14 positions in the steroid molecules tested.     

Distance-constraint approach to protein folding. I. Statistical analysis of protein conformations in terms of distances between residues

A statistical analysis of protein conformations in terms of the distance between residues, represented by their C atoms, is presented. We consider four factors that contribute to the determination of the distanced _i,i+k between a given pair ofith and(i+k)th residues in the native conformation of a globular protein: (1) the distancek along the chain, (2) the size of the protein, (3) the conformational states of theith to(i+k)th residues, and (4) the amino acid types of the and(i+k)th residues. In order to account for the dependence on the distancek along the chain, the statistics are taken for three ranges, viz., short, medium, and long ranges (k8; 9k20; andk21; respectively). In the statistics of short-range distances, a mean distanceD _k and its standard deviationS _k are calculated for each value ofk, with and without taking into account the conformational states of all residues fromi toi+k (factors 1 and 3). As an Appendix, the relations for converting from the distances between residues into other conformational parameters are discussed. In the statistics of long-range distances, a reduced distanced* _ij (the actual distance divided by the radius of gyration) is used to scale the data so that they become independent of protein size, and then a mean reduced distanceD _l (a, a) and its standard deviation _l (a, a) are calculated for each amino acid pair (a, a) (factors 2 and 4). The effect of the neighboring residues along the chain on the value of the distanced* _ij is explored by a linear regression analysis between the actual reduced distanced* _ij and the mean value over theD _l for all possible pairs of residues in the two segments of the (i–2)th to the (i+2)th and the (j–2)th to the (j+2)th residues. The effect is assessed in terms of the tangentA _l (a, a) of the calculated regression line for each amino acid pair (a, a). In the statistics of medium-range distances, only factors 1 and 4 are considered, to simplify the analysis. The scaled distanced _i,i+k =(d _i,i+k -D _k )/S _k is used to eliminate the dependence onk, the distance along the chain. The propertiesD _m (a, a), _m (a, a) andA _m (a, a) corresponding toD _l (a, a), _l (a, a), andA _l (a, a), and also calculated for each amino acid pair (a, a). The results are interpreted as follows: the smaller values ofD _l (a, a) andD _m (a, a) indicate a preference of the pair (a, a) for a contact (e.g., pairs between hydrophobic amino acids, and pairs of Cys with aromatic amino acids), and the larger values of these quantities indicate a preference for distant mutual location (e.g., pairs between strong hydrophilic amino acids); the smaller values of _l (a, a) and _m (a, a) indicate a strong preference for either contact or noncontact (e.g., pairs between hydrophobic amino acids, and pairs between strong hydrophobic and hydrophilic amino acids, respectively), and the larger values of these quantities indicate the ambivalent/neutral nature of the preference for contact and noncontact (e.g., pairs containing Ser or Thr); the smaller values ofA _l (a, a) andA _m (a, a) indicate that the distance of an (a, a) pair is determined independently of the amino acid character of the neighboring residues along the chain (e.g., some pairs of Cys or Met with other amino acids) and the larger values of these quantities indicare that such amino acid character contributes strongly to the determination of the distance (e.g., pairs containing Ser or Thr, and pairs between amino acids with small side chains). The difference between the statistics for the long- and medium-range distances is also discussed; the former reflect the difference between the hydrophobic and hydrophilic character of the residues, but the latter cannot be easily interpretable only in terms of hydrophobicity and hydrophilicity. The data analyzed here are used in the optimization of an object function to compute protein conformation in a subsequent paper.