A fluorescence study of Tn10-encoded Tet repressor

Steady-state fluorescence quenching and time-resolved measurements have been performed to resolve the fluorescence contributions of the two tryptophan residues, W43 and W75, in the subunit of the homodimer of the Tet repressor fromEscherichia coli. The W43 residue is localized within the helix-turn-helix structural domain, which is responsible for sequence-specific binding of the Tet repressor to thetet operator. The W75 residue is in the protein matrix near the tetracycline-binding site. The assignment of the two residues has been confirmed by use of single-tryptophan mutants carrying either W43 or W75. The FQRS (fluorescence-quenching-resolved-spectra) method has been used to decompose the total emission spectrum of the wild-type protein into spectral components. The resolved spectra have maxima of fluorescence at 349 and 324 nm for the W43 and W75 residues, respectively. The maxima of the resolved spectra are in excellent agreement with those found using single-tryptophan-containing mutants. The fluorescence decay properties of the wild type as well as of both mutants of Tet repressor have been characterized by carrying out a multitemperature study. The decays of the wild-type Tet repressor and W43-containing mutant can be described as being of double-exponential type. The W75 mutant decay can be described by a Gaussian continuous distribution centered at 5.0 nsec with a bandwidth equal to 1.34 nsec. The quenching experiments have shown the presence of two classes of W43 emission. One of the components, exposed to solvent, has a maximum of fluorescence emission at 355 nm, with the second one at about 334 nm. The red-emitting component can be characterized by bimolecular-quenching rate constant,k _q equal to 2.6×10⁹, 2.8×10⁹, and 2.0×10⁹ M^–1 sec^–1 for acrylamide, iodide, and succinimide, respectively. The bluer component is unquenchable by any of the quenchers used. The W75 residue of the Tet repressor has quenching rate constant equal to 0.85×10⁹ and 0.28 × 10⁹ M^–1 sec^–1 for acrylamide and succinimide, respectively. These values indicate that the W75 is not deeply buried within the protein matrix. Our results indicate that the Tet repressor can exist in its ground state in two distinct conformational states which differ in the microenvironment of the W43 residue.Abbreviations FQRS fluorescence-quenching-resolved spectra - HTH helix-turn-helix motif - TetR tetracycline repressor fromE. coli - WT wild-type TetR - W43 single point mutant with phenyloalanine substituted for tryptophan at position 75 in both subunits - W75 single point mutant with phenyloalanine substituted for tryptophan at position 43 in both subunits     

Tet repressor-tetracycline interaction

Previous studies [Wasylewskiet al. (1996),J. Protein Chem. 15, 45–58] have shown that the W43 residue localized within the helix-turn-helix structure domain of Tet repressor can exist in the ground state in two conformational states. In this paper we investigate the fluorescence properties of W43 of TetR upon binding of tetracycline inducer and its chemical analogs such as anhydro- and epitetracycline. Binding of the drug inducer to the protein indicates that the W43 residue still exists in two conformational states; however, its environment changes drastically, as can be judged by the changes in fluorescence parameters. The FQRS (fluorescence-quenching-resolved spectra) method was used to decompose the total emission spectrum. The resolved spectra exhibit maxima of fluorescence at 346 and 332 nm and the component quenchable by KI (346 nm) is shifted 9 nm toward the blue side of the spectrum upon inducer binding. The observed shift does not result from the changes in the exposure of W43, since the bimolecular quenching rate constant remains the same and is equal to about 2.7×10⁹M^–1sec^–1. The binding of tetracycline leads to drastic decrease of the W43 fluorescence intensity and increase of the tetracycline intensity as well as the decrease of fluorescence lifetime, especially of the W43 component characterized by the emission at 332 nm. The observed energy transfer from W43 to tetracycline is more efficient for the state characterized by the fluorescence emission at 332 nm (88%) than for the component quenchable by iodide (53%) Tetracycline and several of its derivatives were also used to observe how chemical modifications of the hydrophilic groups in tetracycline influence the mechanism of binding of the antibiotic to Tet repressor. By use of pulsed-laser photoacoustic spectroscopy it is shown that the binding of tetracyclines to Tet repressor leads to significant increase of tetracycline fluorescence quantum yields. Steady-state fluorescence quenching of tetracycline analogs in complexes with Tet repressor using potassium iodide as a quencher allowed us to determine the dependence of the exposure of bound antibiotic on the modifications of hydrophilic substituents of tetracycline. Circular dichroism studies of the TetR-[Mg · tc]⁺ complex do not indicate dramatic changes in the secondary structure of the protein; however, the observed small decrease in the TetR helicity may occur due to partial unfolding of the DNA recognition helix of the protein. The observed changes may play an important role in the process of induction in which tetracycline binding results in the loss of specific DNA binding.Abbreviations FQRS fluorescence-quenching-resolved spectra - HTH helix-turn-helix motif - tc tetracycline - TetR tetracycline repressor from Escherichia coli - TetR WT wild-type TetR - TetR W43 single point mutant with phenylalanine substituted for tryptophan at position 75 in both subunits     

Fluorescence and Phosphorescence Study of Tet Repressor–Operator Interaction

Fluorescence and phosphorescence measurements have been carried out on single-p tryptophan (Trp 43 or Trp 75)-containing mutants of Tet repressor (Tet R). Tet R containing Trp 43, the residue localized in the DNA recognition helix of the repressor, has been used to observe the binding of Tet R to two 20-bp DNA sequences of tet O₁ and tet O₂ operators. Binding of Tet R to tet O₁ operator leads to a 78% decrease of the repressor fluorescence intensity, with an accompanying 20-nm blue shift of its fluorescence emission maximum to 330 nm. Upon binding of Tet R to tet O₂ operator, the Trp 43 fluorescence intensity is quenched by 60%, and a 10-nm shift of its emission maximum to 340 nm occurs. Solute fluorescence quenching studies, using acrylamide, performed at low ionic strength indicate that in both the complex of Tet R with the O₁ and that with the O₂ operator, Trp 43 is moderately buried, as indicated by a bimolecular rate quenching constant of about 1.8 × 10⁹ M^–1 sec^–1. In contrast to the Tet R–tet O₂ complex, the Stern–Volmer acrylamide quenching constant K _sv of the complex with tet O₁ operator changes from 7.5 M^–1 at 5 mM NaCl to 22 M^–1 at 200 mM NaCl, indicating different exposures of Trp 43 in the two complexes in solutions of higher ionic strength. Phosphorescence studies showed a 0–0 vibronic transition at 408 and 403 nm for Trp 43 and Trp 75, respectively. Upon binding of Tet R to the tet operators, we observed red shifts of 0–0 vibronic bands of Trp 43 to 413 and 412 nm for tet O₁ and tet O₂ operator, respectively, and the phosphorescence triplet lifetime of Trp 43 at 75 K was quenched from 6.0–5.5 to 3.5–3.3 sec. The thermal phosphorescence quenching profile ranged from –200°C to –20°C, and differed drastically for the two complexes, suggesting different dynamics of the microenvironment of the Trp 43 residue. The luminescence data for Trp 43 of Tet R suggest that the recognition helix of Tet R interacts in different fashions with the tet O₁ and tet O₂ operators.     

Kinetics and Equilibrium Studies of Tet Repressor–Operator Interaction

Binding of a Tet repressor mutant containing a single Trp43 residue in the tet operator recognition α-helix leads to the quenching of the protein fluorescence down to about 23% in the case of the tet O₁ operator and to 40% in the case of the tet O₂ operator. We have used fluorescence detection to describe the binding equilibrium and kinetics of the Tet repressor interaction with the 20-bp DNA operators tet O₁ and tet O₂. Stopped-flow measurements in an excess of the tet operators performed in 5 mM NaCl or 150 mM NaCl indicate that the reaction can be described by at least three exponentials characterized by different relaxation times. The mechanism of interaction for both operators as well as for two salt concentrations used can be described as TetR + Operator ? Complex 1 ? Complex 2 ? Complex 3. Only the much faster process can be described as a second-order reaction characterized by a bimolecular rate constant equal to 2.8 × 10⁶ M^?1 sec^?1 for both operators. The medium and slow processes may be described by relaxational times ranging from 50 msec to seconds. The results of the binding equilibrium measurements extrapolated to 1 M NaCl concentration, which reflects the specific nonionic interaction between TetR and tet operators, indicate K _as equal to 3.2 × 10⁴ and 4.0 × 10⁵ M^?1 for tet O₁ and tet O₂, respectively. The number of monovalent ions replaced upon binding can be calculated as about 5 and 3 for tet O₁ and tet O₂, respectively. The binding of Tet repressor to the operators leads to changes in the circular dichroism spectra of the DNA which could indicate transitions of B-DNA into A-like DNA structure.     

Steroid-protein interactions. Fluorescence quenching of progesterone-binding globulin and alpha1-acid glycoprotein upon binding of steroids.

The influence of progesterone and four other steroids on the intrinsic fluorescence of progesterone-binding globulin was investigated. The corresponding effect of progesterone on α₁-acid glycoprotein was also studied. The intrinsic fluorescence of the progesterone-binding globulin and of α₁-acid glycoprotein was quenched by about 60 and 17%, respectively, upon forming stoichiometric complexes with progesterone. Graphical analysis of fluorescence quenching titrations with progesterone gave affinity constants at 23 °C of 2 × 10⁹m^?1 for progesterone-binding globulin and 1 × 10⁶m^?1 for α₁-acid glycoprotein. With progesterone-binding globulin, affinity constants of 1 × 10⁹m^?1 were determined for desoxycorticosterone, 1 × 10⁸m^?1 for testosterone, and 2 × 10⁶m^?1 for cortisol. The fluorescence quenching of PBG by 5-pregnen-3β-ol-20-one, 5α-pregnanedione, and 5β-pregnanedione, steroids lacking the Δ⁴-3-keto grouping, was too small to be evaluated; however, binding of the pregnanediones to progesterone-binding globulins was demonstrated when the progesterone-progesterone-binding globulin complex was “unquenched” as a result of competitive displacement of progesterone by addition of the pregnanediones. The quenching phenomenon is assumed to be mainly due to radiationless transfer from protein to the near uv (n → π1) absorption band of steroids containing the Δ⁴-3-keto chromophore.     

Fluorescence Quenching Studies of Trp Repressor–Operator Interaction

Steady-state quenching and time-resolved fluorescence measurements of L-tryptophan binding to the tryptophan-free mutant W19/99F of the tryptophan repressor of Escherichia coli have been used to observe the coreperessor microenvirnment changes upon ligand binding. Using iodide and acrylamide as quenchers, we have resolved the emission spectra of the corepressor into two components. The bluer component of L-tryptophan buried in the holorepressor exhibits a maximum of the fluorescence emission at 336 nm and can be characterized by a Stern–Volmer quenching constant equal to about 2.0–2.3 M^?1. The second, redder component is exposed to the solvent and possesses the fluorescence emission and Stern–Volmer quenching constant characteristic of L-tryptophan in the solvent. When the Trp holorepressor is bound to the DNA operator, further alterations in the corepressor fluorescence are observed. Acrylamide quenching experiments indicate that the Stern–Volmer quenching constant of the buried component of the corepressor decreases drastically to a value of 0.56 M^?1. The fluorescence lifetimes of L-tryptophan in a complex with Trp repressor decrease substantially upon binding to DNA, which indicates a dynamic mechanism of the quenching process.     

43Ca NMR studies of Ca2+-Tetrahymena calmodulin complexes

⁴³Ca NMR spectra of Ca²⁺-Tetrahymena calmodulin(Tet. CaM.) complexes have been observed under various conditions. Off-rate of Ca²⁺ from Tet. CaM. is estimated to be approx. 2.7 × 10³ s^?1 under a certain assumption. Relaxation rates of ⁴³Ca NMR of Ca²⁺-Tet. CaM. are remarkably increased(by one order in magnitude) by adding trifluoperazine(TFP), a potent calmodulin antagonist. Relaxation parameters estimated suggest that Ca²⁺ mobility is reduced by the TFP binding. A stoichiometry of TFP is two moles per Tet. CaM. molecule. The relaxation rates of ⁴³Ca NMR signals are increased by adding excessive Mg²⁺ to the Ca²⁺-Tet. CaM. solutions. The addition of Mg²⁺ to the Ca²⁺-Tet. CaM. complex decreases apparent pKa value of the complex as well.     

Fluorescence quenching of tryptophan by trifluoroacetamide

Trifluoroacetamide was found to be a good quencher of tryptophan fluorescence, and the quenching was shown to proceed via both a dynamic and a static process. The respective quenching constants were determined by the measurement of the decrease of the fluorescence lifetime in the presence of the quencher. The static and the bimolecular rate quenching constants of N-acetyltryptophanamide are equal to 0.34 1·mol^?1 and 1.9·10⁹ 1·mol^?1·s^?1, respectively. These values indicate that trifluoroacetamide is an efficient quencher of tryptophan fluorescence. This conclusion is also supported by a complete quenching of bovine serum albumin and wheat germ agglutinin fluorescence. In the case of lysozyme, trifluoroacetamide quenches the fluorescence of tryptophan residues which fluoresce with a maximum at 348 nm but not the buried tryptophan residues which fluoresce with a maximum at 333 nm. Trifluoroacetamide quenching of wheat germ agglutinin emission confirms the homogeneity and the high accessibility of emitting tryptophan residues, in agreement with a previous report (Privat, J.P. and Monsigny, M. (1975) Eur. J. Biochem. 60, 555–567). The tryptophan fluorescence decay of wheat germ agglutinin is biexponential even in the presence of the quencher; the static and bimolecular rate quenching constants are equal to 0.22 1·mol^?1 and 092·10⁹ 1·mol^?1·^?1, respectively. In the presence of a specific lectin ligand, the methyldi-N,N′-trifluoroacetyl-β- chitobioside, the quenching of wheat germ agglutinin fluorescence involves a direct contact between tryptophan residues and trifluoroacetamido groups of the ligand and in contrast with the quenching induced by free trifluoroacetamide shows that the tryptophan fluorescence is not fully quenched.     

Spectroscopic Studies on the Interaction of Fluorine Containing Triazole with Bovine Serum Albumin

The binding of one fluorine including triazole (C₁₀H₉FN₄S, FTZ) to bovine serum albumin (BSA) was studied by spectroscopic techniques including fluorescence spectroscopy, UV–Vis absorption, and circular dichroism (CD) spectroscopy under simulative physiological conditions. Fluorescence data revealed that the fluorescence quenching of BSA by FTZ was the result of forming a complex of BSA–FTZ, and the binding constants (K _a) at three different temperatures (298, 304, and 310 K) were 1.516?×?10⁴, 1.627?×?10⁴, and 1.711?×?10⁴?mol L^?1, respectively, according to the modified Stern–Volmer equation. The thermodynamic parameters ΔH and ΔS were estimated to be 7.752 kJ mol^?1 and 125.217 J?mol^?1?K^?1, respectively, indicating that hydrophobic interaction played a major role in stabilizing the BSA–FTZ complex. It was observed that site I was the main binding site for FTZ to BSA from the competitive experiments. The distance r between donor (BSA) and acceptor (FTZ) was calculated to be 7.42 nm based on the Förster theory of non-radioactive energy transfer. Furthermore, the analysis of fluorescence data and CD data revealed that the conformation of BSA changed upon the interaction with FTZ.     

The binding characteristics of the interaction between 3-(2-cyanoethyl) cytosine and human serum albumin

The binding characteristics of the interaction between 3-(2-cyanoethyl) cytosine (CECT) and human serum albumin (HSA) were investigated using fluorescence, UV absorption spectroscopic and molecular modeling techniques under simulative physiological conditions. The intrinsic fluorescence intensity of HSA was decreased with the addition of CECT. The fluorescence data handled by Stern–Volmer equation proved that the quenching mechanism of the interaction between CECT and HSA was a static quenching procedure. The binding constants evaluated utilizing the Lineweaver–Burk equation at 17, 27 and 37?°C, were 2.340?×?10⁴, 2.093?×?10⁴ and 1.899?×?10⁴?L?mol^?1, respectively. The thermodynamic parameters were calculated according to van’t Hoff equations. Negative enthalpy (ΔH) and positive entropy (ΔS) values indicated that both hydrogen bond and hydrophobic force played a major role in the binding process of CECT to HSA, which was consistent with the results of the molecular modeling study. In addition, the effect of other ions on the binding constant of CECT-HSA was examined.     

Tryptophan in alpha-helix 3 of Tet repressor forms a sequence-specific contact with tet operator in solution

The Tn10-encoded Tet repressor contains two tryptophan residues at positions 43 and 75. The typical tryptophan fluorescence is decreased upon binding of tet operator. The Tet repressor gene was engineered to replace either or both of the Trp codons by Phe codons. The resulting single tryptophan mutants are called F43 and F75 and the double mutant F43F75. The mutant proteins were purified to homogeneity. They recognize tet operator DNA only in the absence of the inducer tetracycline, indicating an intact tertiary structure of the engineered proteins. F75 and wild-type bind tet operator with the same association constant. The association constants of F43 and F43F75 with tet operator are about 3 orders of magnitude smaller. This indicates that Trp43 is important for tet operator recognition. Trp43 fluorescence is completely quenched in the complex with tet operator DNA while Trp75 remains unaffected. Binding to nonspecific DNA leads only to a 40% decrease of Trp43 fluorescence. This is interpreted as the contribution of the changed environment while the complete quench reflects a tight sequence-specific contact of tryptophan 43 to tet operator DNA. Trp43 is solvent-exposed, while Trp75 is buried in the hydrophobic interior of the protein. These results are discussed in light of the alpha-helix turn-alpha-helix DNA binding motif deduced from homology to other repressor proteins.     

Trypsin inhibitors from ridged gourd (Luffa acutangula Linn.) seeds: Purification,properties, and amino acid sequences

Two trypsin inhibitors, LA-1 and LA-2, have been isolated from ridged gourd (Luffa acutangula Linn.) seeds and purified to homogeneity by gel filtration followed by ion-exchange chromatography. The isoelectric point is atpH 4.55 for LA-1 and atpH 5.85 for LA-2. The Stokes radius of each inhibitor is 11.4 å. The fluorescence emission spectrum of each inhibitor is similar to that of the free tyrosine. The biomolecular rate constant of acrylamide quenching is 1.0×10⁹ M^?1 sec^?1 for LA-1 and 0.8 × 10⁹ M^?1 sec^?1 for LA-2 and that of K₂HPO₄ quenching is 1.6×10¹¹ M^?1 sec^?1 for LA-1 and 1.2×10¹¹M^?1 sec^?1 for LA-2. Analysis of the circular dichroic spectra yields 40%α-helix and 60%Β-turn for La-1 and 45%α-helix and 55%Β-turn for LA-2. Inhibitors LA-1 and LA-2 consist of 28 and 29 amino acid residues, respectively. They lack threonine, alanine, valine, and tryptophan. Both inhibitors strongly inhibit trypsin by forming enzymeinhibitor complexes at a molar ratio of unity. A chemical modification study suggests the involvement of arginine of LA-1 and lysine of LA-2 in their reactive sites. The inhibitors are very similar in their amino acid sequences, and show sequence homology with other squash family inhibitors.     

Fluorescence spectrometric study on the interaction of tamibarotene with bovine serum albumin

The interaction between tamibarotene and bovine serum albumin (BSA) was studied using fluorescence quenching technique and ultraviolet–visible spectrophotometry. The results of experiments showed that tamibarotene could strongly quench the intrinsic fluorescence of BSA by a dynamic quenching mechanism. The apparent binding constant, number of binding site and corresponding thermodynamic parameters at different temperatures were calculated respectively, and the main interaction force between tamibarotene and BSA was proved to be hydrophobic force. Synchronous fluorescence spectra showed that tamibarotene changed the molecular conformation of BSA. When BSA concentration was 1.00 × 10^?6 mol L^?1, the quenched fluorescence ΔF had a good linear relationship with the concentration of tamibarotene in the range 1.00 × 10^?6 to 12.00 × 10^?6 mol L^?1 with the detection limit of 6.52 × 10^?7 mol L^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

A new spectrofluorimetric method for the determination of some tetracyclines based on their interfering effect on resonance fluorescence energy transfer

A rapid, simple, inexpensive and highly sensitive spectrofluorimetric method was developed for the determination of trace amounts of some tetracyclines (TCs), namely tetracycline hydrochloride (TCH), oxytetracycline hydrochloride (OTCH) and minocycline hydrochloride (MCH). Binding rhodamine B (RhB) to gold nanoparticles (Au NPs) resulted in quenching of the fluorescence of RhB by a resonance energy transfer (FRET) mechanism, with Au NPs as the energy acceptors. The presence of TCs caused the release of RhB molecules and recovered their fluorescence, and this was used as a basis for the quantitative determination of TCs. The reaction was monitored spectrofluorimetrically by measuring the increase in fluorescence of RhB at 572 nm starting 5 min after mixing the reagents in Tris buffer solution (pH 6.5). The effect of various experimental factors such as buffer type, pH, concentrations of the involved reagents and reaction time were studied to optimize the reaction conditions. Under optimum conditions, the calibration graphs were linear within the ranges 2.08 × 10^?9–1.04 × 10^?6 mol/L, 2.01 × 10^?9–1.00 × 10^?6 mol/L and 2.02 × 10^?9–1.01 × 10^?6 mol/L and detection limits (LODs) of 0.61 × 10^?9, 0.32 × 10^?9 and 0.66 × 10^?9 mol/L were calculated for TCH, OTCH and MCH, respectively, with corresponding percent relative standard deviations (%RSDs) of 1.18, 1.21 and 1.54 (n = 5). The method was successfully applied to the determination of TCs in drinking water, human urine, bovine milk and breast milk samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive determination of enoxacin in pharmaceutical formulations by its quench effect on the fluorescence of glutathione‐capped CdTe quantum dots

A sensitive and simple method for the determination of enoxacin (ENX) was developed based on the fluorescence quenching effect of ENX for glutathione (GSH)‐capped CdTe quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 4.333 × 10^?9 mol?L^?1 to 1.4 × 10^?5 mol?L^?1 with a correlation coefficient (R) of 0.9987, and the detection limit (3σ/K) was 1.313 × 10^?9 mol?L^?1. The corresponding mechanism has been proposed on the basis of electron transfer supported by ultraviolet–visible (UV) light absorption, fluorescence spectroscopy, and the measurement of fluorescence lifetime. The method has been applied to the determination of ENX in pharmaceutical formulations (enoxacin gluconate injections and commercial tablets) with satisfactory results. The proposed method manifested several advantages such as high sensitivity, short analysis time, low cost and ease of operation. Copyright © 2015 John Wiley & Sons, Ltd.     

Mutagenic effect of ultraviolet radiation on the non-acid-fast strain ofMycobacterium phlei

The mutability of the PN strain ofMycobacterium phlei was examined after induction of auxotrophic mutants and of STM and VM-resistant mutants, by UV irradiation. A total of 30 auxotrophic mutants were isolated, most of them amino acid-dependent five purine-dependent, and one uracil-dependent. To induce the mutants higher UV doses had to be used so that the survival of cells in the original suspension would not exceed a few per cent. For further genetic work use can be made of 8 auxotrophic mutants (PN try^?ura^?, PN arg^?ura^?, PN ileu^?val^?, PN ileu^?, PN leu^?, PN lys^?, PN lys^?-VM^r, PN val^?), these showing a low frequency of spontaneous reversions. No spontaneous auxotrophic mutants have been found. The frequency of STM and VM-resistant mutants is increased upon UV irradiation, a post-irradiation incubation in a liquid medium without the drug being essential for their phenotypic expression. The highest increase of the number of these mutants is attained after 48 h of post-irradiation incubation and it has been found that, within a certain experimental scatter, the same frequency increase is found on using a complete or a minimal liquid medium. The frequency of spontaneous STM-resistant mutants lies within 5.8×10^?6–8.8×10^?6, of those VM-resistant between 3.1×10^?5 and 4.1×10^?5. The highest frequency of induced STM-resistant mutants lies between 3.0×10^?5 and 9.3×10^?5 and of VM-resistant mutants between 1.1×10^?4 and 2.2×10^?4     

Multi-spectroscopic studies on the interaction between traditional Chinese herb,helicid with pepsin

Study on the binding properties of helicid by pepsin systematically using multi-spectroscopic techniques and molecular docking method, and these interactions comprise biological recognition at molecular level and backbone of biological significance in medicine concerned with the uses, effects, and modes of action of drugs. We investigated the mechanism of interaction between helicid and pepsin by using various spectroscopic techniques viz., fluorescence spectra, UV–Vis absorption spectra, circular dichroism (CD), 3D spectra, synchronous fluorescence spectra and molecular docking methods. The quenching mechanism associated with the helicid–pepsin interaction was determined by performing fluorescence measurements at different temperatures. From the experimental results show that helicid quenched the fluorescence intensity of pepsin via a combination of static and dynamic quenching process. The binding constants (K_a) at three temperatures (288, 298, and 308 K) were 7.940?×?10⁷, 2.082?×?10⁵ and 3.199?×?10⁵ L mol^?1, respectively, and the number of binding sites (n) were 1.44, 1.14, and 1.18, respectively. The n value is close to unity, which means that there is only one independent class of binding site on pepsin for helicid. Thermodynamic parameters at 298 K were calculated as follows: ΔH^o (??83.85 kJ mol^?1), ΔG^o (??33.279 kJ mol^?1), and ΔS^o (??169.72 J K^?1 mol^?1). Based on thermodynamic analysis, the interaction of helicid with pepsin is driven by enthalpy, and Van der Waals’ forces and hydrogen bonds are the main forces between helicid and pepsin. A molecular docking study further confirmed the binding mode obtained by the experimental studies. The conformational changes in the structure of pepsin was confirmed by 3D fluorescence spectra and circular dichroism.     

Fluorescence lifetime reference standards for the range 0.189 to 115 nanoseconds

A review of the modern literature reveals that the values for quinine fluorescence lifetime are in good agreement, the mean value being 18.91±0.56 nsec. By virtue of some very unusual properties, quinine appears suitable for use as a lifetime reference standard for any value from 0.189 to 18.9 nsec, with an expected accuracy of ±3% throughout this range. Cl^?, not normally considered a quenching agent, quenches quinine emission at diffusion-controlled rates. The Stern-Volmer plot was unique in that the strict lincarity, indicating pure collisional quenching, was maintained even when fluorescence was > 99% quenched. Thus, solutions of quinine-NaCl can be made up having lifetimes known to great accuracy. Similarly, γ-pyrenebutyrate solutions containing KI are suitable standards for the range up to 115 nsec. The compositions of such solutions have been calculated and tabulated. It is argued that the lifetimes of these solutions are at least as reliable as any of the hundreds of lifetimes which have been reported in the literature. Several important applications of such lifetime standards are discussed.     

Trp scanning analysis of Tet repressor reveals conformational changes associated with operator and anhydrotetracycline binding.

We analysed the conformational states of free, tet operator-bound and anhydrotetracycline-bound Tet repressor employing a Trp-scanning approach. The two wild-type Trp residues in Tet repressor were replaced by Tyr or Phe and single Trp residues were introduced at each of the positions 162-173, representing part of an unstructured loop and the N-terminal six residues of alpha-helix 9. All mutants retained in vivo inducibility, but anhydrotetracycline-binding constants were decreased up to 7.5-fold when Trp was in positions 169, 170 and 173. Helical positions (168-173) differed from those in the loop (162-167) in terms of their fluorescence emission maxima, quenching rate constants with acrylamide and anisotropies in the free and tet operator-complexed proteins. Trp fluorescence emission decreased drastically upon atc binding, mainly due to energy transfer. For all proteins, either free, tet operator bound or anhydrtetracycline-bound, mean fluorescence lifetimes were determined to derive quenching rate constants. Solvent-accessible surfaces of the respective Trp side chains were calculated and compared with the quenching rate constants in the anhydrotetracycline-bound complexes. The results support a model, in which residues in the loop become more exposed, whereas residues in alpha-helix 9 become more buried upon the induction of TetR by anhydrotetracycline.