Physical Parameters of a Reactor-Stellarator with Small Ripples of the Helical Magnetic Field

The paper describes the calculation data on the physical parameters of a reactor-stellarator, where the nonuniformities of the helical field are smaller than the toroidal magnetic field nonuniformities: ε_h < ε_t. Unlike the previous studies, where the ion-component transport coefficients had the collision frequency dependence proportional to ν^1/2, this being equivalent to the ε_h > ε_t case, in the present calculations, these coefficients were assumed to be in proportion to the first power of the collision frequency, D_i ∝ ν for ν_eff < 2ω_E, and to D_i ∝ ν^?1 for the inverse inequality. Here, ω_E is the rotation frequency of plasma in the radial electric field. As before, the plasma electrons corresponded to the mode of D_e ∝ ν^?1. As initial parameters for numerical calculations, a reactor with R = 8 m, r_p = 2 m, and B₀ = 5 Т was taken. A numerical code was used to solve the set of equations that describes the plasma space?time behavior in the reactor-stellarator under the conditions of equal diffusion fluxes. The start of reactor operation in the mode of thermonuclear burning was provided by heating sources with a power of several tens of megawatts. Steady-state operating conditions of a self-sustained thermonuclear reaction were attained by maintaining the plasma density through DT fuel pellet injection into the plasma.     

Loss or Mislocalization of Aquaporin-4 Affects Diffusion Properties and Intermediary Metabolism in Gray Matter of Mice

The first aim of this study was to determine how complete or perivascular loss of aquaporin-4 (AQP4) water channels affects membrane permeability for water in the mouse brain grey matter in the steady state. Time-dependent diffusion magnetic resonance imaging was performed on global Aqp4 knock out (KO) and α-syntrophin (α-syn) KO mice, in the latter perivascular AQP4 are mislocalized, but still functioning. Control animals were corresponding wild type (WT) mice. By combining in vivo diffusion measurements with the effective medium theory and previously measured extra-cellular volume fractions, the effects of membrane permeability and extracellular volume fraction were uncoupled for Aqp4 and α-syn KO. The second aim was to assess the effect of α-syn KO on cortical intermediary metabolism combining in vivo [1-¹³C]glucose and [1,2-¹³C]acetate injection with ex vivo ¹³C MR spectroscopy. Aqp4 KO increased the effective diffusion coefficient at long diffusion times by 5%, and a 14% decrease in membrane water permeability was estimated for Aqp4 KO compared with WT mice. α-syn KO did not affect the measured diffusion parameters. In the metabolic analyses, significantly lower amounts of [4-¹³C]glutamate and [4-¹³C]glutamine, and percent enrichment in [4-¹³C]glutamate were detected in the α-syn KO mice. [1,2-¹³C]acetate metabolism was unaffected in α-syn KO, but the contribution of astrocyte derived metabolites to GABA synthesis was significantly increased. Taken together, α-syn KO mice appeared to have decreased neuronal glucose metabolism, partly compensated for by utilization of astrocyte derived metabolites.     

Simulations of the Ion Current to a Probe in Plasma with Allowance for Ionization and Ion–Neutral Collisions: II. Cylindrical Probe

The ion current to a cylindrical probe is considered with allowance for volume ionization, ion–neutral collisions, and the ion orbital moment. A model based on the molecular dynamics method and applicable in a wide range of plasma parameters (r_p/λ_D= 0.01–100, r_i/λ_D= 0.002–200, ν_i/ω_0i= 0.01–0.05, and T_i/T_e = 0?0.01) is proposed A convenient representation of the dependence of the relative ion current density on the Langmuir coefficient β² and a technique for determining the plasma density from simulation results are offered.     

Crown exposure to light and tree allometry of 11 tree species in a snowy cool-temperate forest in Japan

Crown exposure to light (CE) and tree allometry were investigated for 11 species in a snowy cool-temperate secondary forest dominated by Fagus crenata and Betula ermanii in Japan. The 11 species differentiated horizontal and vertical light gradients for regeneration. CE was highly variable across species in small trees, but variation in CE decreased with increasing height. The 11 species were classified into three patterns of height-dependent change in CE in comparison to community-level trends, and rank reversal of CE with increasing height was not apparent. Allometric relationships between trunk diameter (D) and height (H) and between D and trunk length (L) differed little between trees of high and low CE within species. In contrast, slopes of the allometric relationships between D and H differed across species; species with larger maximum height (H _max) were taller at a given D, as was noted in previous studies of warm-temperate and tropical forest trees. Differences in trunk angle among the species of different H _max were the main factor generating the differences in allometric relationships between D and H in this forest. Trunk angle increased with increasing height in the species of large H _max but decreased in those of small H _max. Hence, allometric relationships between D and L were not related to H _max. Since the species of small H _max grow laterally and are easily covered in snow during winter while those of large H _max grow vertically above snow cover, differences in trunk angle may reflect species mechanical properties.     

Characteristics of a transverse RF discharge in Xe/Cl<Subscript>2</Subscript> mixtures

Results are presented from the study of the electrical and optical characteristics of a transverse RF discharge in Xe/Cl₂ mixtures at pressures of p≤400 Pa. The working mixture was excited by a modulated RF discharge (f=1.76 MHz) with a transverse electrode configuration (L≤17 cm). The emission spectrum in the spectral range of 210–600 nm and the waveforms of the discharge current, discharge voltage, and plasma emission intensity were investigated. The UV emission power from the discharge was studied as a function of the pressure and composition of a Xe/Cl₂ mixture. It is shown that a discharge in a xenon-chlorine mixture acts as planar excimer-halogen lamp operating in the spectral range of 220–450 nm, which contains a system of overlapping XeCl(D, B-X; B, C-A) and Cl₂(D′-A′) bands. Transverse RF discharges in Xe/Cl₂ mixtures can be used to create a wideband lamp with two 50-cm² planar apertures and the low circulation rate of the working mixture.     

Polyhydroxylated steroid compounds from the Far Eastern starfish <Emphasis Type="Italic">Distolasterias nipon</Emphasis>

Two new steroid glycosides: distolasteroside D₆, (24S)-24-O-(β-D-xylopyranosyl)-5α-cholestane-3β,6α,8,15β,16β,24-hexaol, and distolasteroside D₇, (22E,24R)-24-O-(β-D-xylopyranosyl)-5α-cholest-22-ene-3β,6α,8,15β,24-pentaol were isolated along with the previously known distolasterosides D₁, D₂, and D₃, echinasteroside C, and (25S)-5α-cholestane-3β4β,6α,7α,8,15α,16β,26-octaol from the Far Eastern starfish Distolasterias nipon. The structures of new compounds were elucidated by NMR spectroscopy and MALDI TOF mass spectrometry. Like neurotrophins, distolasterosides D₁, D₂, and D₃ were shown to induce neuroblast differentiation in a mouse neuroblastoma C1300 cell culture.     

Stomatal regulation in Douglas fir following a fungal-mediated chronic reduction in leaf area

Pathogens can cause chronic premature needle abscission in coniferous species. To assess the potential impacts on tree productivity, stomatal regulation was investigated in Douglas fir with chronic stomatal occlusion and defoliation from varying levels of the Swiss needle cast (SNC) fungus, Phaeocryptopus gaeumannii. Levels of SNC disease and subsequent defoliation were manipulated by choosing six sites with varying levels of disease and by foliar applications of fungicides on six trees per site. Diurnal measurements of leaf water potential (Ψ_leaf), stomatal conductance (g _s) and vapor pressure deficit (D) were made on six fungicide treated and six control trees per site. In addition, leaf specific hydraulic conductance was calculated on a single branch (K _{L_B}) from three trees per treatment per site. Stomatal conductance at D=1 kPa (g _sref) was negatively correlated with fungal colonization (number of fruiting bodies present in needle stomata) and positively correlated with K _{L_B}. Despite reduced needle retention in diseased trees, K _L declined due to a reduction in sapwood area and permeability (i.e., increasing presence of latewood in functional sapwood). In general, stomatal sensitivity to D for all foliage was consistent with stomatal regulation based on a simple hydraulic model [g _s=K _L(Ψ_soil?Ψ_leaf)/ D], which assumes strict stomatal regulation of Ψ_leaf. However, when fungal presence reduced maximum g _s below the potential maximum supported by hydraulic architecture, stomatal sensitivity was lower than expected based on the theoretical relationship: dg _s/dlnD=0.6·g _sref. The results indicate that losses in productivity associated with physical blockage of stomata and defoliation are compounded by additional losses in K _L and a reduction in g _s in remaining functional stomata.     

Characterization of Smad3 knockout mouse derived skin cells

TGF-β plays an important role in skin wound healing process, in which Smad3 acts as a signaling molecule. Smad3 knockout mice exhibit enhanced wound healing and less inflammatory process, but the intrinsic properties of the mouse derived skin cells are generally unexplored. The purpose of this study is to characterize the biological behavior of skin cells derived from Smad3 knockout mice and thus to define the mechanism of this particular wound healing process. Keratinocytes and dermal fibroblasts were harvested from the skin of Smad3 knockout (Smad3 KO) and wild-type (WT) mice and in vitro cultured for one and two passages for various experiments. The results showed that KO mouse serum contained significantly higher levels of TGF-β1 and lower level of IL-6 and IL-10 than WT mouse serum (p < 0.05), which were also supported by the same findings of more TGF-β1 and less IL-6 and IL-10 in the supernatant of cultured KO dermal fibroblasts than those of WT cells (p < 0.05). At gene levels, IL-6, IL-10, and TGF-β1 were significantly less expressed in KO fibroblasts than in WT fibroblasts (p < 0.05). In addition, KO dermal fibroblasts also exhibited stronger migration and proliferation potentials than WT fibroblasts (p < 0.05). Moreover, both KO fibroblasts and keratinocytes showed higher colony-forming efficiency than WT counterparts with significant difference (p < 0.05). These findings indicate that both systemic factors and intrinsic properties of skin cells contribute to enhanced wound healing and less inflammatory reaction observed in Smad3 knock-out mice.     

In planta characterization of a tau class glutathione S-transferase gene from <Emphasis Type="Italic">Juglans regia</Emphasis> (<Emphasis Type="Italic">JrGSTTau1</Emphasis>) involved in chilling tolerance

Key message

JrGSTTau1 is an important candidate gene for plant chilling tolerance regulation.

Abstract

A tau subfamily glutathione S-transferase (GST) gene from Juglans regia (JrGSTTau1, GeneBank No.: KT351091) was cloned and functionally characterized. JrGSTTau1 was induced by 16, 12, 10, 8, and 6 °C stresses. The transiently transformed J. regia showed much greater GST, glutathione peroxidase (GPX), superoxide dismutase (SOD), and peroxidase (POD) activities and lower H₂O₂, malondialdehyde (MDA), reactive oxygen species (ROS), and electrolyte leakage (EL) rate than prokII (empty vector control) and RNAi::JrGSTTau1 under cold stress, indicating that JrGSTTau1 may be involved in chilling tolerance. To further confirm the role of JrGSTTau1, JrGSTTau1 was heterologously expressed in tobacco, transgenic Line5, Line9, and Line12 were chosen for analysis. The germinations of WT, Line5, Line9, and Line12 were similar, but the fresh weight, primary root length, and total chlorophyll content (tcc) of the transgenic lines were significantly higher than those of WT under cold stress. When cultivated in soil, the GST and SOD activities of transgenic tobacco were significantly higher than those of WT; however, the MDA and H₂O₂ contents of WT were on average 1.47- and 1.96-fold higher than those of Line5, Line9, and Line12 under 16 °C. The DAB, Evans blue, and PI staining further confirmed these results. Furthermore, the abundances of NtGST, MnSOD, NtMAPK9, and CDPK15 were elevated in 35S::JrGSTTau1 tobacco compared with WT. These results suggested that JrGSTTau1 improves the plant chilling tolerance involved in protecting enzymes, ROS scavenging, and stress-related genes, indicating that JrGSTTau1 is a candidate gene for the potential application in molecular breeding to enhance plant abiotic stress tolerance.

     

Over-Expression of <Emphasis Type="Italic">PmHSP17.9</Emphasis> in Transgenic <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> Confers Thermotolerance

Small heat shock proteins (sHSPs) have been shown to be involved in stress tolerance. However, their functions in Prunus mume under heat treatment are poorly characterized. To improve our understanding of sHSPs, we cloned a sHSP gene, PmHSP17.9, from P. mume. Sequence alignment and phylogenetic analysis indicated that PmHSP17.9 was a member of plant cytosolic class III sHSPs. Besides heat stress, PmHSP17.9 was also upregulated by salt, dehydration, oxidative stresses and ABA treatment. Leaves of transgenic Arabidopsis thaliana that ectopically express PmHSP17.9 accumulated less O₂ ^? and H₂O₂ compared with wild type (WT) after 42 °C treatment for 6 h. Over-expression of PmHSP17.9 in transgenic Arabidopsis enhanced seedling thermotolerance by decreased relative electrolyte leakage and MDA content under heat stress treatment when compared to WT plants. In addition, the induced expression of HSP101, HSFA2, and delta 1-pyrroline-5-carboxylate synthase (P5CS) under heat stress was more pronounced in transgenic plants than in WT plants. These results support the positive role of PmHSP17.9 in response to heat stress treatment.     

Hardness maximization or equalization? New insights and quantitative relations between hardness increase and bond dissociation energy

It has been overlooked that the change of hardness, η, upon bonding is intimately connected to thermochemical cycles, which determine whether hardness is increased according to Pearson’s “maximum hardness principle” (MHP) or equalized, as expected by Datta’s “hardness equalization principle” (HEP). So far the performances of these likely incompatible “structural principles” have not been compared. Computational validations have been inconclusive because the hardness values and even their qualitative trends change drastically and unsystematically at different levels of theory. Here I elucidate the physical basis of both rules, and shed new light on them from an elementary experimental source. The difference, Δη = η _mol – <η _at>, of the molecular hardness, η _mol, and the averaged atomic hardness, <η _at>, is determined by thermochemical cycles involving the bond dissociation energies D of the molecule, D ⁺ of its cation, and D ^? of its anion. Whether the hardness is increased, equalized or even reduced is strongly influenced by ΔD = 2D – D ⁺  ? D ^?. Quantitative expressions for Δη are obtained, and the principles are tested on 90 molecules and the association reactions forming them. The Wigner-Witmer symmetry constraints on bonding require the valence state (VS) hardness, η _VS, instead of the conventional ground state (GS) hardness, η _GS. Many intriguingly “unpredictable” failures and systematic shortcomings of said “principles” are understood and overcome for the first time, including failures involving exotic and/or challenging molecules, such as Be_2, B₂, O₃, and transition metal compounds. New linear relationships are discovered between the MHP hardness increase Δη _VS and the intrinsic bond dissociation energy D _i . For bond formations, MHP and HEP are not compatible, and HEP does not qualify as an ordering rule.     

Interaction of various types of photosystem I complexes with exogenous electron acceptors

Interaction of photosystem I (PS I) complexes from cyanobacteria Synechocystis sp. PCC 6803 containing various quinones in the A₁-site (phylloquinone PhQ in the wild-type strain (WT), and plastoquinone PQ or 2,3-dichloronaphthoquinone Cl ₂ NQ in the menB deletion strain) and different numbers of Fe₄S₄ clusters (intact WT and F_X-core complexes depleted of F_A/F_B centers) with external acceptors has been studied. The efficiency of interaction was estimated by measuring the light-induced absorption changes at 820 nm due to the reduction of the special pair of chlorophylls (P₇₀₀ ⁺) by an external acceptor(s). It was shown that externally added Cl ₂ NQ is able to effectively accept electrons from the terminal iron-sulfur clusters of PS I. Moreover, the efficiency of Cl ₂ NQ as external acceptor was higher than the efficiency of the commonly used artificial electron acceptor, methylviologen (MV) for both the intact WT PS I and for the F_X-core complexes. The comparison of the efficiency of MV interaction with different types of PS I complexes revealed gradual decrease in the following order: intact WT?>?menB?>?F_X-core. The effect of MV on the recombination kinetics in menB complexes of PS I with Cl ₂ NQ in the A₁-site differed significantly from all other PS I samples. The obtained effects are considered in terms of kinetic efficiency of electron acceptors in relation to thermodynamic and structural characteristics of PS I complexes.     

Bacterial metabolites from intra- and inter-species influencing thermotolerance: the case of <Emphasis Type="Italic">Bacillus cereus</Emphasis> and <Emphasis Type="Italic">Geobacillus stearothermophilus</Emphasis>

Bacterial metabolites with communicative functions could provide protection against stress conditions to members of the same species. Yet, information remains limited about protection provided by metabolites in Bacillus cereus and inter-species. This study investigated the effect of extracellular compounds derived from heat shocked (HS) and non-HS cultures of B. cereus and Geobacillus stearothermophilus on the thermotolerance of non-HS vegetative and sporulating B. cereus. Cultures of B. cereus and G. stearothermophilus were subjected to HS (42 or 65 °C respectively for 30 min) or non-HS treatments. Cells and supernatants were separated, mixed in a combined array, and then exposed to 50 °C for 60 min and viable cells determined. For spores, D values (85 and 95 °C) were evaluated after 120 h. In most cases, supernatants from HS B. cereus cultures added to non-HS B. cereus cells caused their thermotolerance to increase (D ₅₀ 12.2–51.9) when compared to supernatants from non-HS cultures (D ₅₀ 7.4–21.7). While the addition of supernatants from HS and non-HS G. stearothermophilus cultures caused the thermotolerance of non-HS cells from B. cereus to decrease initially (D ₅₀ 3.7–7.1), a subsequent increase was detected in most cases (D ₅₀ 18–97.7). In most cases, supernatants from sporulating G. stearothermophilus added to sporulating cells of B. cereus caused the thermotolerance of B. cereus 4810 spores to decline, whereas that of B. cereus 14579 increased. This study clearly shows that metabolites in supernatants from either the same or different species (such as G. stearothermophilus) influence the thermotolerance of B. cereus.     

Measurements of the plasma density in the FTU tokamak by a pulsed time-of-flight X-wave refractometer

On-line control over the plasma density in tokamaks (especially, in long-term discharges) requires reliable measurements of the averaged plasma density. For this purpose, a new method of density measurements—a pulsed time-of-flight plasma refractometry—was developed and tested in the T-11M tokamak. This method allows one to determine the averaged density from the measured time delay of nanosecond microwave pulses propagating through the plasma. For an O-wave, the measured time delay is proportional to the line-averaged density and is independent of the density profile (f?f _p ) τ_o ≈ k _o \(\tfrac{1}{{f^2 }}\mathop \smallint \limits_l \) N(x dx. A similar formula is valid for an X-wave: τ_X = ≈ k _x \(\tfrac{{f^2 + f_c^2 }}{{(f^2 - f_c^2 )^2 }}\mathop \smallint \limits_l \) N(x)dx. Here, f is the frequency of the probing wave, f _p is the plasma frequency, l= 4 a is the path length for two-pass probing in the equatorial plane, a is the plasma minor radius, k _O and k _X are numerical factors, f _c is the electron-cyclotron frequency at the axis of the plasma column, and f _p ?f _c , f. Measurements of the time delay provide the same information as plasma interferometry, though they do no employ the effect of interference. When the conditions f _p ?f _c , f are not satisfied, the measured time delay depends on the shape of the density profile. In this case, in order to determine the average density regardless of the density profile, it is necessary to perform simultaneous measurements at several probing frequencies in order to determine the average density. In ITER (Bt ～ 5T), a spectral window between the lower and upper cutoff frequencies in the range of 50–100 GHz can be used for pulsed time-of-flight X-wave refractometry. This appreciably simplifies the diagnostics and eliminates the problem of the first mirror. In this paper, the first results obtained in the FTU tokamak with a prototype of the ITER pulsed time-of-flight refractometer are presented. The geometry and layout of experiments similar to the planned ITER experiments are described. The density measured by pulsed time-of-flight refractometry is shown to agree well with the results obtained in FTU with a two-frequency scanning IR interferometer. The results obtained are analyzed, and the future experiments are discussed.     

Thermostability enhancement of chitosanase CsnA by fusion a family 5 carbohydrate-binding module

Objective

To determine the effects of carbohydrate-binding modules (CBMs) on the thermostability and catalytic efficiency of chitosanase CsnA.

Results

Three CBMs (BgCBM5, PfCBM32-2 and AoCBM35) were engineered at the C-terminus of chitosanase CsnA to create hybrid enzymes CsnA-CBM5, CsnA-CBM32 and CsnA-CBM35. K _m values of all the hybrid enzymes were lower than that of the wild type (WT) enzyme; however, only CsnA-CBM5 had an elevated specific activity and catalytic efficiency. The fusion of BgCBM5 enhanced the thermostability of the enzyme, which exhibited a 8.9 °C higher T₅₀ and a 2.9 °C higher T_m than the WT. Secondary structural analysis indicated that appending BgCBM5 at the C-terminus considerably changed the secondary structure content.

Conclusions

The fusion of BgCBM5 improved the thermal stability of CsnA, and the obtained hybrid enzyme (CsnA-CBM5) is a useful candidate for industrial application.