Impact of Natural Variations in Freeze-Drying Parameters on Product Temperature History: Application of Quasi Steady-State Heat and Mass Transfer and Simple Statistics

Inter- and intra-batch variability in heat and mass transfer during the drying phase of lyophilization is well recognized. Heat transfer variability between individual vials in the same batch arise from both different positions in the vial array and from variations in the bottom contour of the vials, both effects contributing roughly equally to variations in the effective heat transfer coefficient of the vials, K_v. Both effects can be measured in the laboratory, and variations in average K_v values as a function of vial position in the array for lab and production can be calculated by use of the simple steady-state heat and mass transfer theory. Typically, in the laboratory dryer, vials on the edge of the array, “edge vials,” run 2–4°C warmer than “center vials,” but differences between laboratory and manufacturing temperatures are modest. The variability in mass transfer can be assigned to major variations in ice nucleation temperature (both intra-batch and inter-batch), including major differences between laboratory and manufacturing. The net effect of all random variations, for each class of vial, can be evaluated by a simple statistical model-propagation of error, which then allows prediction of the distribution in product temperatures and drying times, and therefore prediction of percent of vials dry and percent of vials collapsed and proximity to the edge of failure for a given process. Good agreement between theoretical and experimentally determined maximum temperatures in primary drying and percent collapsed product demonstrates the calculations have useful accuracy.     

Heat and mass transfer scale-up issues during freeze-drying, III: Control and characterization of dryer differences via operational qualification tests

The objective of this research was to estimate differences in heat and mass transfer between freeze dryers due to inherent design characteristics using data obtained from sublimation tests. This study also aimed to provide guidelines for convenient scale-up of the freeze-drying process. Data obtained from sublimation tests performed on laboratory-scale, pilot, and production freeze dryers were used to evaluate various heat and mass transfer parameters: nonuniformity in shelf surface temperatures, resistance of pipe, refrigeration system, and condenser. Emissivity measurements of relevant surfaces such as the chamber wall and the freeze dryer door were taken to evaluate the impact of atypical radiation heat transfer during scale-up. “Hot” and “cold” spots were identified on the shelf surface of different freeze dryers, and the impact of variation in shelf surface temperatures on the primary drying time and the product temperature during primary drying was studied. Calculations performed using emissivity measurements on different freeze dryers suggest that a front vial in the laboratory lyophilizer received 1.8 times more heat than a front vial in a manufacturing freeze dryer operating at a shelf temperature of −25°C and a chamber pressure of 150 mTorr during primary drying. Therefore, front vials in the laboratory are much more atypical than front vials in manufacturing. Steady-state heat and mass transfer equations were used to study a combination of different scaleup issues pertinent during lyophilization cycles commonly used for the freeze-drying of pharmaceuticals.     

Spatial Variation of Pressure in the Lyophilization Product Chamber Part 2: Experimental Measurements and Implications for Scale-up and Batch Uniformity

Product temperature during the primary drying step of freeze-drying is controlled by a set point chamber pressure and shelf temperature. However, recent computational modeling suggests a possible variation in local chamber pressure. The current work presents an experimental verification of the local chamber pressure gradients in a lab-scale freeze-dryer. Pressure differences between the center and the edges of a lab-scale freeze-dryer shelf were measured as a function of sublimation flux and clearance between the sublimation front and the shelf above. A modest 3-mTorr difference in pressure was observed as the sublimation flux was doubled from 0.5 to 1.0 kg·h^?1·m^?2 at a clearance of 2.6 cm. Further, at a constant sublimation flux of 1.0 kg·h^?1·m^?2, an 8-fold increase in the pressure drop was observed across the shelf as the clearance was decreased from 4 to 1.6 cm. Scale-up of the pressure variation from lab- to a manufacturing-scale freeze-dryer predicted an increased uniformity in drying rates across the batch for two frequently used pharmaceutical excipients (mannitol and sucrose at 5% w/w). However, at an atypical condition of shelf temperature of +10°C and chamber pressure of 50 mTorr, the product temperature in the center vials was calculated to be a degree higher than the edge vial for a low resistance product, thus reversing the typical edge and center vial behavior. Thus, the effect of local pressure variation is more significant at the manufacturing-scale than at a lab-scale and accounting for the contribution of variations in the local chamber pressures can improve success in scale-up.     

Study of the oxidation of alkanes in their mixtures with oxygen and air under the action of a pulsed volume nanosecond discharge

The slow oxidation of alkanes (from methane to hexane) in their stoichiometric mixtures with oxygen or air under the action of nanosecond pulsed discharges was investigated. The discharges were excited in a tube of diameter 5 cm and length of 20 cm by 25-ns voltage pulses with an amplitude of 10 kV and a repetition rate of 40 Hz. The initial pressure in the mixture was varied in the range 0.76–10.1 torr. The current, the electric field strength, and the power deposited in a discharge were measured with a nanosecond time resolution. In time-resolved and time-integrated measurements, the intensities of the following bands were determined: CO ₂ ⁺ (B²Σ → X²Π, δv=0), CH(A²Δ, v′=0 → X²Π, v″=0), OH(A²Σ, v′=0 → X²Π, v″=0), CO(B¹Σ, v′=0 → A¹Π, v″=2), NO(A²Σ → X²Π, δv=3), N₂(C³Π, v′=1 → B³Π, v″=7), N₂(B³Π, v′=6 → A³Σ, v″=3), and N ₂ ⁺ (B²Σ, v′=0 → X²Σ, v″=2). The methane concentration was measured from the absorption of He-Ne laser radiation. Based on the results of optical measurements, the times of the complete oxidation of hydrocarbons were determined.     

Nutrient allocation and photochemical responses of <Emphasis Type="Italic">Populus</Emphasis> × <Emphasis Type="Italic">canadensis</Emphasis> ‘Neva’ to nitrogen fertilization and exogenous <Emphasis Type="Italic">Rhizophagus irregularis</Emphasis> inoculation

Arbuscular mycorrhizal fungi (AMF) can promote plant growth performance, but their effectiveness varies depending on soil nitrogen (N) availability. To clarify the effectiveness of exogenous AMF along an N-fertilization gradient (0, 2, 10, 20, and 30 mM), the impacts of exogenous Rhizophagus irregularis and N on the growth, photochemical activity, and nutritional status of Populus?×?canadensis ‘Neva’ in natural soil were evaluated in a pot experiment. The results showed that the 10 mM N level was the optimal fertilization regime with the highest promotion effect on plant growth and the maximum quantum yield of photosystem II (PSII) (F_v/F_m). Excess N (20 and 30 mM) fertilization reduced the actual quantum yield of PSII (ФPSII) and the F_v/F_m of the plants. Regardless of the N availability, inoculated plants exhibited greater F_v/F_m values than did non-inoculated plants. The biomass of inoculated plants was significantly higher compared with the control under low N levels (0 and 2 mM). Under high N levels, inoculated plants showed significant increases in ФPSII. Moreover, the nutrient imbalance of plants inoculated with exogenous R. irregularis was eased by increasing P, Fe, Mn and Cu uptake in roots and higher P, Ca, Mg, Fe, Mn and Zn concentrations in leaves. Moreover, the F_v/F_m and ФPSII exhibited positive correlations with P, Ca, Mg and Zn concentrations in leaves. In conclusion, inoculation with exogenous R. irregularis can benefit plant fitness by improving the photochemical capacity and nutrient composition of poplar under different N levels.     

Diversity in growth patterns among strains of the lethal fungal pathogen <Emphasis Type="Italic">Batrachochytrium dendrobatidis</Emphasis> across extended thermal optima

The thermal sensitivities of organisms regulate a wide range of ecological interactions, including host–parasite dynamics. The effect of temperature on disease ecology can be remarkably complex in disease systems where the hosts are ectothermic and where thermal conditions constrain pathogen reproductive rates. Amphibian chytridiomycosis, caused by the pathogen Batrachochytrium dendrobatidis (Bd), is a lethal fungal disease that is influenced by temperature. However, recent temperature studies have produced contradictory findings, suggesting that our current understanding of thermal effects on Bd may be incomplete. We investigated how temperature affects three different Bd strains to evaluate diversity in thermal responses. We quantified growth across the entire thermal range of Bd, and beyond the known thermal limits (T _max and T _min). Our results show that all Bd strains remained viable and grew following 24 h freeze (?12 °C) and heat shock (28 °C) treatments. Additionally, we found that two Bd strains had higher logistic growth rates (r) and carrying capacities (K) at the upper and lower extremities of the temperature range, and especially in low temperature conditions (2–3 °C). In contrast, a third strain exhibited relatively lower growth rates and carrying capacities at these same thermal extremes. Overall, our results suggest that there is considerable variation among Bd strains in thermal tolerance, and they establish a new thermal sensitivity profile for Bd. More generally, our findings point toward important questions concerning the mechanisms that dictate fungal thermal tolerances and temperature-dependent pathogenesis in other fungal disease systems.     

The involvement of TsFtsH8 in <Emphasis Type="Italic">Thellungiella salsuginea</Emphasis> tolerance to cold and high light stresses

Thellungiella salsuginea is a plant that commonly grows in harsh environments of salinity and low temperature. Although the molecular mechanism underlying salt tolerance in T. salsuginea has been extensively explored, our understanding of how this species tolerates cold stress is limited. In a previous study, Wong et al. (2006) identified a cold-inducible TsFtsH8 gene in T. salsuginea. Based on the role of AtFtsH in D1 protein turnover and in maintaining the normal function of photosystem II, we hypothesized that TsFtsH8 might be related to cold tolerance in T. salsuginea. In the present study, RNAi lines of TsFtsH8 were generated and its tolerance to cold was evaluated. The results showed that in early spring, TsFtsH8-RNAi lines underwent leaf variegation, severe chlorophyll decomposition, organelle deterioration, decrease in the maximum photochemical efficiency of photosystem II (F _v /F _m) and in the proportion of open photosystem II reaction centers (qP), and incomplete degradation of the 23 kDa fragment of the D1 protein. These findings suggest that TsFtsH8 is involved in the development of T. salsuginea in the early spring.     

Nitrogen-induced variations in leaf gas exchange of spring triticale under field conditions

Nitrogen (N) is the key factor limiting photosynthetic processes and crop yield. Little is known about the response of leaf gas exchange of spring triticale (Triticosecale Wittm.) to N supply. The effect of N fertilizers on different gas exchange variables, i.e., photosynthetic rate (A), transpiration rate (E), stomatal conductance (g _s), instantaneous water use efficiency (WUE) and maximum quantum yield of photosystem II (PSII) (F _v/F _m), chlorophyll index (SPAD, soil–plant analysis development), and the relationship of these variables with yield were studied in spring triticale grown under field conditions. Six treatments of N—0, 90, 180, 90 + 30, 90 + 30 + 30 kg ha^?1 (applied as ammonium nitrate, AN) and one treatment of N 90 + 30 + 30 kg ha^?1 (applied as urea ammonium nitrate solution, UAN) were compared. The analysis of variance showed that throughout the triticale growing season, N fertilization had significant effects on A, WUE, g _s and SPAD. On average, N fertilizer application increased A values by 14–70%. E and F _v/F _m values were not influenced by N fertilization levels. The effect of growth stage and year on gas exchange variables and F _v/F _m and SPAD was found to be significant. At different growth stages, A values varied and maximum ones were reached at BBCH 31–33 (decimal code system of growth stages) and BBCH 59. With aging, values of A decreased independently of N fertilization level. The gas exchange variables were equally affected by both fertilizer forms. The interplay among grain yield, leaf gas exchange variables, F _v/F _m and SPAD of spring triticale was estimated. The statistical analysis showed that grain yield positively and significantly correlated with A and SPAD values throughout the growing season.     

Suspended-sediment responses after strip thinning in headwater catchments

We examined changes in suspended-sediment yields (SSY) after a 50 % strip thinning in headwater streams draining a Japanese cedar (Cryptomeria japonica) and cypress (Chamaecyparis obtusa) plantation forest. We applied a paired-catchment analysis to treated (K _T : 17.1 ha) and control (K _C : 8.9 ha) catchments. Annual suspended-sediment yield (SSY_an) in the prethinning period in the K _T and K _C catchments was 110.0 and 142.1 kg/ha per year. For the postthinning period, SSY_an in the K _T catchment became 5055.6 kg/ha per year, whereas that in the K _C catchment increased 893.2 kg/ha per year. The paired-catchment analysis revealed that SSY in the K _T catchment increased 17.0-fold compared with the prethinning period. However, the dominant hysteresis pattern remained clockwise in both pre- and postthinning periods. Sequences of large storm events in the postthinning period elevated SSY in both catchments. Increase in suspended sediment in the K _T catchment was associated with the combined impacts of thinning and sequences of storm events during the period of thinning operation.     

Rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) hydraulic conductivity links to leaf venation architecture under well-watered condition rather than PEG-induced water deficit

Higher plant hydraulic conductivity (K _plant) is vital for plant growth, especially under PEG-induced water deficit stress (PEG-IWDS). Leaf venation architecture is a key determinant of leaf hydraulic conductivity (K _leaf) and K _leaf is a major component of K _plant across different plant species. However, there is little information about (1) varietal difference in leaf vein development in cereal crops, such as rice plants; (2) the effects of PEG-IWDS on leaf vein development; (3) the coordination between leaf venation architecture and K _plant as well as K _leaf under PEG-IWDS. In the present study, widely cultivated eight rice cultivars were grown hydroponically under well-watered condition (WWC) and PEG-IWDS, simulated by adding 15 % (w/v) PEG6000. Leaf venation architecture, including total longitudinal leaf vein number, leaf vein numbers per unit width (LVNW), vein thickness and leaf mass per area, as well as K _plant and K _leaf were measured to address above-mentioned questions. The results showed that leaf venation architecture exhibited significant varietal differences and PEG-IWDS significantly increased LVNW while decreased vein thickness. PEG-IWDS suppressed both K _plant and K _leaf but the decrease was much higher in K _plant than K _leaf. There was a significant and positive correlation observed between LVNW and K _leaf under both WWC and PEG-IWDS but the correlation between LVNW and K _plant was only significant under WWC. K _leaf was significantly and positively correlated with K _plant under WWC but not under PEG-IWDS. It is concluded that K _leaf is a major determinant for K _plant under WWC but not under PEG-IWDS; therefore, breeding or selecting rice cultivars with high LVNW can improve shoot water supplement under WWC but not under PEG-IWDS condition.     

Deciphering the mode of action,structural and biochemical analysis of heparinase II/III (<Emphasis Type="Italic">Ps</Emphasis>PL12a) a new member of family 12 polysaccharide lyase from <Emphasis Type="Italic">Pseudopedobacter saltans</Emphasis>

Heparinases are widely used for production of clinically and therapeutically important bioactive oligosaccharides and in analyzing the polydisperse, heterogeneous, and complex structures of heparin/heparan sulfate. In the present study, the gene (1911 bp) encoding heparinase II/III of family 12 polysaccharide lyase (PsPL12a) from Pseudopedobacter saltans was cloned, expressed, and biochemically and functionally characterized. The purified enzyme PsPL12a of molecular size approximately 76 kDa exhibited maximum activity in the temperature range 45–50 °C and at pH 6.0. PsPL12a gave maximum activity at 1% (w/v) heparin under optimum conditions. The kinetic parameters, K _m and V_max, for PsPL12a were 4.6?±?0.5 mg/ml and 70?±?2 U/mg, respectively. Ten millimolars of each Mg²⁺ and Mn²⁺ ions enhanced PsPL12a activity by 80%, whereas Ni²⁺ inhibited by 75% and Co²⁺ by 10%, and EDTA completely inactivated the enzyme. Protein melting curve of PsPL12a gave a single peak at 55 °C and 10 mM Mg²⁺ ions and shifted the peak to 60 °C. The secondary structure analysis of PsPL12a by CD showed 65.12% α-helix, 11.84% β-strand, and 23.04% random coil. The degradation products of heparin by PsPL12a analyzed by ESI-MS spectra displayed peaks corresponding to heparin di-, tetra-, penta-, and hexa-saccharides revealing the endolytic mode of enzyme action. Heparinase II/III (PsPL12a) from P. saltans can be used for production of low molecular weight heparin oligosaccharides for their utilization as anticoagulants. This is the first report on heparinase cloned from P. saltans.     

Cultivar variation in cotton photosynthetic performance under different temperature regimes

Cotton (Gossypium hirsutum L.) yields are impacted by overall photosynthetic production. Factors that influence crop photosynthesis are the plants genetic makeup and the environmental conditions. This study investigated cultivar variation in photosynthesis in the field conditions under both ambient and higher temperature. Six diverse cotton cultivars were grown in the field at Stoneville, MS under both an ambient and a high temperature regime during the 2006–2008 growing seasons. Mid-season leaf net photosynthetic rates (P_N) and dark-adapted chlorophyll fluorescence variable to maximal ratios (F_v/F_m) were determined on two leaves per plot. Temperature regimes did not have a significant effect on either P_N or F_v/F_m. In 2006, however, there was a significant cultivar × temperature interaction for P_N caused by PeeDee 3 having a lower P_N under the high temperature regime. Other cultivars’ P_N were not affected by temperature. FM 800BR cultivar consistently had a higher P_N across the years of the study. Despite demonstrating a higher leaf F_v/F_m, ST 5599BR exhibited a lower P_N than the other cultivars. Although genetic variability was detected in photosynthesis and heat tolerance, the differences found were probably too small and inconsistent to be useful for a breeding program.     

Intrapopulation heterogeneity of the fluorescence parameters of the marine plankton alga <Emphasis Type="Italic">Thalassiosira weissflogii</Emphasis> at various nitrogen levels

Fluorescence of the marine alga Thalassiosira weissflogii (Grunow) Fryxell et Hasle with open (F _o ) and closed (F _m ) reaction centers of photosystem 2 (PS 2) and its relative variable fluorescence (F _v/F _m ) were measured at various levels of inorganic nitrogen. A significant heterogeneity of the population in terms of these parameters was revealed. Some cells within the population were more sensitive to nitrogen deficiency, and their photosynthetic apparatus was disrupted to a greater extent. The cells within a population also differed in terms of their ability to recover after incubation at low nitrogen levels. Enhancement of nitrogen deficiency resulted in an increase in the variability of the F _o and F _v/F _m values of the cells. Fluorescence variability decreased at a less pronounced deficiency. Fluorescence variability should be taken into consideration in the studies concerning responses of algae to changes in nutrient contents.     

The Effect of Five Biomass Cropping Systems on Soil-Saturated Hydraulic Conductivity Across a Topographic Gradient

Understanding the environmental impact of bioenergy crops is needed to inform bioenergy policy development. We determined the effects of five biomass cropping systems—continuous maize (Zea mays), soybean (Glycine max)-triticale (Triticosecale ×)/soybean-maize, maize-switchgrass (Panicum virgatum), triticale/sorghum (Sorghum bicolor), and triticale-aspen (Populus alba × P. grandidentata)—on soil-saturated hydraulic conductivity (K _S ) across a toposequence in central Iowa, USA. We compared data from the time of cropping system establishment in 2009 to 4 years post-establishment. Both our 2009 and 2013 data confirmed that cropping system impacts on K _S vary by landscape position. We found that differences in cropping system impacts were more likely to occur at lower landscape positions, specifically, within footslope and floodplain positions. Previous research on cropping system impacts suggested that grass and woody systems were associated with a general increase in K _S over time, with greater changes likely occurring at landscape positions with a higher erosive potential or lower SOC content. Our results confirmed that the triticale-aspen woody system was associated with a significant increase in K _S across all landscape positions. In contrast, we did not observe an increase in K _S under maize-switchgrass, which we attributed to the high density of switchgrass roots by the fourth year of study, but expect an increase in K _S under switchgrass under longer measurement periods. We also found a significant increase in K _S in the annual systems, likely due to the conversion to no-till soil management with cropping system establishment. We expect such differences to become more apparent over longer time scales as cropping systems continue to impact soil hydraulic properties.     

Electronic structure,rovibrational, and dipole moment calculations for the AsCl molecule

The potential energy curves of the 19 lowest-lying singlet and triplet electronic states in the ^2S+1Λ^(+/?) representation of the AsCl molecule have been investigated using the complete active space self-consistent field (CASSCF) with multireference configuration interaction (MRCI+Q) method including single and double excitations and with the Davidson correction. The harmonic frequency ω _e, the internuclear distance R _e, the dipole moment, and the electronic energy with respect to the ground state T _e were calculated for the electronic states considered. By using the canonical functions approach, the eigenvalue E _v, the rotational constant B _v, and the abscissae of the turning points R _min and R _max were calculated for the electronic states up to the vibrational level v?=?60. The values obtained in the present work agree well with corresponding values available in the literature for several electronic states. Fifteen new electronic states were investigated here for the first time.     

How Common Are Intragene Windows with <Emphasis Type="Italic">K</Emphasis><Subscript>A</Subscript> > <Emphasis Type="Italic">K</Emphasis><Subscript>S</Subscript> Owing to Purifying Selection on Synonymous Mutations?

One method for diagnosing the mode of sequence evolution considers the ratio of nonsynonymous substitutions per nonsynonymous site (K _A) to the corresponding figure for synonymous substitutions (K _S). A ratio (K _A/K _S) greater than unity is taken as evidence for positive selection. This, however, need not necessarily be the case. Notably, there is one instance of a high intragenic K _A/K _S peak, revealed by sliding window analysis and observed in two pairwise comparisons, better accounted for by localised purifying selection on synonymous mutations that affect splicing. Is this example exceptional? To address this we isolate intragenic domains with K _A/K _S > 1 from more than 1000 long mouse-rat orthologues. Approximately one K _A/K _S > 1 peak is found per 12–15 kb of coding sequence. Surprisingly, low synonymous substitution rates underpin more incidences than do high nonsynonymous rates. Several reasons, however, prevent us from supposing that the low synonymous rates reflect purifying selection on synonymous mutations. First, for many peaks, the null that the peak is no higher than expected given the underlying rates of evolution, cannot be rejected. Second, of 18 statistically significant incidences with unusually low K _S values, only 3 are repeatable across independent comparisons. At least two of these are within alternatively spliced exons. We conclude that repeatable statistically significant intragenic domains of low intragenic K _S are rare. As so few K _A/K _S peaks reflect increased rates of protein evolution and so few hold statistical support, we additionally conclude that sliding window analysis to infer domains of positive selection is highly error-prone.     

Antimicrobial activity,cytotoxicity and chemical analysis of lemongrass essential oil (<Emphasis Type="Italic">Cymbopogon flexuosus</Emphasis>) and pure citral

The aim of this study was to determine the antimicrobial effects of lemongrass essential oil (C. flexuosus) and to determine cytotoxic effects of both test compounds on human dermal fibroblasts. Antimicrobial susceptibility screening was carried out using the disk diffusion method. Antimicrobial resistance was observed in four of five Acinetobacter baumannii strains with two strains confirmed as multi-drug-resistant (MDR). All the strains tested were susceptible to both lemongrass and citral with zones of inhibition varying between 17 to 80 mm. The mean minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of citral (mic—0.14 % and mbc—0.3 % v/v) was lower than that of Lemongrass (mic—0.65 % and mbc—1.1 % v/v) determined using the microtitre plate method. Cell viability using human dermal fibroblasts (HDF; 106-05a) was determined following exposure to both compounds and a control (Grapeseed oil) using the XTT assay and the IC₅₀ determined at 0.095 % (v/v) for citral and 0.126 % (v/v) for lemongrass. Grapeseed oil had no effect on cell viability. Live cell imaging was performed using the LumaScope 500 imaging equipment and changes in HDF cell morphology such as necrotic features and shrinkage were observed. The ability of lemongrass essential oil (EO) and citral to inhibit and kill MDR A. baumannii highlights its potential for use in the management of drug-resistant infections; however, in vitro cytotoxicity does suggest further tests are needed before in vivo or ex vivo human exposure.     

Patterns of pyrite oxidation by different microorganisms

The bacterial-chemical oxidation of natural pyrites with different physical, chemical, and electrophysical characteristics by bacteria Acidithiobacillus ferrooxidans, Sulfobacillus thermotolerans, and the archaeon Ferroplasma acidiphilum were studied. The electrophysical characteristics of three natural pyrites differed in the K _thermoEMF value (pyrites 3, 4, hole conduction (p-type conductivity); pyrite 5, mixed type conductivity (n-p)) and in the logarithm of electric resistance. Chemical oxidation of pyrites 3 and 5 resulted in no changes of K _thermoEMF. When pyrite 4 was oxidized chemically, the K _thermoEMF values remained in the same range as in the initial sample, but the ratio of grains with different K _thermoEMF values in the sample was changed: the number of grains with a higher K _thermoEMF value increased. The same changes were also observed in the course of bacterio-chemical oxidation of pyrite 4. Of the three pyrites studied, an increase in the logarithm of resistance was observed only for chemical oxidation of pyrite 4 at 28°C. At higher experimental temperatures, the logarithm of resistance increased accordingly; more active bacterial-chemical oxidation resulted in a more pronounced increase in the logarithm of resistance than chemical oxidation. On bacterial-chemical oxidation of pyrites 3 and 5 by A. ferrooxidans and S. thermotolerans strains, iron was leached more actively than sulfur. Preferred bacterial-chemical oxidation of certain fractions from the pyrite samples was shown, namely of the pyrite 3 fraction with higher K _thermoEMF values by the F. acidiphilum strain and of a fraction from the pyrite 5 sample with medium K _thermoEMF values by the A. ferrooxidans and S. thermotolerans strains. The comparative assessment of bacterial-chemical pyrite oxidation by three types of microorganisms showed the direction of changes in the K _thermoEMF values to be the same in the case of bacteria Acidithiobacillus ferrooxidans and Sulfobacillus thermotolerans and different in the case of the archaeon Ferroplasma acidiphilum.     

Modeling the effects of extracellular potassium on bursting properties in pre-Bötzinger complex neurons

There are many types of neurons that intrinsically generate rhythmic bursting activity, even when isolated, and these neurons underlie several specific motor behaviors. Rhythmic neurons that drive the inspiratory phase of respiration are located in the medullary pre-Bötzinger Complex (pre-BötC). However, it is not known if their rhythmic bursting is the result of intrinsic mechanisms or synaptic interactions. In many cases, for bursting to occur, the excitability of these neurons needs to be elevated. This excitation is provided in vitro (e.g. in slices), by increasing extracellular potassium concentration (K _out ) well beyond physiologic levels. Elevated K _out shifts the reversal potentials for all potassium currents including the potassium component of leakage to higher values. However, how an increase in K _out , and the resultant changes in potassium currents, induce bursting activity, have yet to be established. Moreover, it is not known if the endogenous bursting induced in vitro is representative of neural behavior in vivo. Our modeling study examines the interplay between K _out , excitability, and selected currents, as they relate to endogenous rhythmic bursting. Starting with a Hodgkin-Huxley formalization of a pre-BötC neuron, a potassium ion component was incorporated into the leakage current, and model behaviors were investigated at varying concentrations of K _out . Our simulations show that endogenous bursting activity, evoked in vitro by elevation of K _out , is the result of a specific relationship between the leakage and voltage-dependent, delayed rectifier potassium currents, which may not be observed at physiological levels of extracellular potassium.