Reactivation of inactive X chromosome in buccal smear of carcinoma of breast

Buccal mucosal smears of 100 female patients of carcinoma of breast were compared with 100 controls matched accordingly. The frequency of Barr bodies was significantly lower in carcinoma of breast patients (menstruating and menopausal women) P < 0.001 when compared with controls indicating reactivation of the inactive X chromosome.     

Reactivation of the totally inactive pancreatic lipase RP1 by structure-predicted point mutations

Both classical pancreatic lipase (DPL) and pancreatic lipase-related protein 1 (DPLRP1) have been found to be secreted by dog exocrine pancreas. These two proteins were purified to homogeneity from canine pancreatic juice and no significant catalytic activity was observed with dog PLRP1 on any of the substrates tested: di- and tri-glycerides, phospholipids, etc. DPLRP1 was crystallized and its structure solved by molecular replacement and refined at a resolution of 2.10 Å. Its structure is similar to that of the classical PL structures in the absence of any inhibitors or micelles. The lid domain that controls the access to the active site was found to have a closed conformation. An amino-acid substitution (Ala 178 Val) in the DPLRP1 may result in a steric clash with one of the acyl chains observed in the structures of a C11 alkyl phosphonate inhibitor, a transition state analogue, bound to the classical PL. This substitution was suspected of being responsible for the absence of DPLRP1 activity. The presence of Val and Ala residues in positions 178 and 180, respectively, are characteristic of all the known PLRP1, whereas Ala and Pro residues are always present in the same positions in all the other members of the PL gene family. Introducing the double mutation Val 178 Ala and Ala 180 Pro into the human pancreatic RP1 (HPLRP1) gene yielded a well expressed and folded enzyme in insect cells. This enzyme is kinetically active on triglycerides. Our findings on DPLRP1 and HPLRP1 are therefore likely to apply to all the RP1 lipases. Proteins 32:523–531, 1998. © 1998 Wiley-Liss, Inc.     

A cold-labile acetyl-coenzyme-A hydrolase from the supernatant fraction of rat liver. Reactivation and reconstitution of the active species from the inactive monomer

An acetyl-coenzyme-A hydrolase from the supernatant fraction of rat liver is known to be rapidly inactivated at low temperature. Loss of catalytic activity is accompanied by apparent dissociation of tetrameric and dimeric forms of the enzyme into monomers. It was found that rewarming under appropriate conditions almost completely reversed the cold-induced inactivation and dissociation of the enzyme: At a protein concentration of 14 micrograms/ml, simple rewarming only partially restored the enzyme activity (less than 3% of the original activity), but at a higher concentration of the enzyme or in the presence of 1 mg/ml bovine serum albumin, the reactivation by warming was greater. Warming at 37 degrees C appeared to be optimal for reactivation; warming at 25 degrees C or at 43 degrees C was less effective. Longer exposure to cold did not affect reactivation on rewarming, but on repeated inactivation and reactivation the reactivation decreased to some extent, especially at lower concentrations of enzyme protein. Among various nucleotides tested, ATP greatly enhanced the restoration of the activity, while ITP, UTP and ADP were less effective and AMP, GTP, TTP and CTP had little effect. At an enzyme-protein concentration of 14 micrograms/ml, 2 mM ATP restored the enzyme activity to about 70% of that before cold treatment, while acetyl-CoA (0.5 mM) restored the activity about 50%. High concentrations of phosphate (0.92 M) and pyrophosphate (0.45 M) restored about 80% and 95%, respectively, of the original activity. Sucrose density gradient centrifugation of the active dimer at high enzyme concentration at 4 degrees C for 20 h produced a monomeric form without catalytic activity. Gel filtration showed that simple rewarming mostly converted the monomeric enzyme obtained in this way to the dimeric form, whereas on rewarming with ATP the monomer was mostly converted to a tetrameric form. The dimeric and tetrameric forms both had catalytic activity.     

Oxidation of lysozyme by iodine: isolation of an inactive product and its conversion to an oxindolealanine-lysozyme

Reaction of lysozyme with a half-molar amount of iodine at pH 5.5 gives, in 50% yield (based on iodine), an enzymatically-inactive singly-oxidized derivative. This intermediate can be converted to an oxindole-lysozyme. Analysis showed no modification other than two-electron oxidation of one tryptophan. Substrate analogs prevent the oxidative inactivation. Reaction of crystalline lysozyme with iodine gives the same inactive product found in solution.     

Second-site revertants of an inactive T4 lysozyme mutant restore activity by restructuring the active site cleft

Substitution of Thr26 by Gln in the lysozyme of bacteriophage T4 produces an enzyme with greatly reduced activity but essentially unaltered stability relative to wild type. Spontaneous second-site revertants of the mutant were selected genetically; two of them were chosen for structural and biochemical characterization. One revertant bears (in addition to the primary mutation) the substitution Tyr18----His, the other, Tyr18----Asp. The primary mutant and both revertant lysozyme genes were reconstructed in a plasmid-based expression system, and the proteins were produced and purified. The two revertant lysozymes exhibit enzymatic activities intermediate between wild type and the primary mutant; both also exhibit melting temperatures approximately 3 degrees C lower than either the wild type or the primary mutant. Crystals suitable for X-ray diffraction analysis were obtained from both revertant lysozymes, but not the primary mutant. Structures of the double mutant lysozymes were refined at 1.8-A resolution to crystallographic residuals of 15.1% (Tyr18----His) and 15.2% (Tyr18----Asp). Model building suggests that the side chain of Gln26 in the primary mutant is forced to protrude into the active site cleft, resulting in low catalytic activity. In contrast, the crystal structures of the revertants reveal that the double substitutions (Gln26 and His18, or Gln26 and Asp18) fit into the same space that is occupied by Thr26 and Tyr18 in the wild-type enzyme; the effect is a restructuring of the surface of the active site cleft, with essentially no perturbation of the polypeptide backbone. This restructuring is effected by a novel series of hydrogen bonds and electrostatic interactions that apparently stabilize the revertant structures.     

Formation of three-dimensional structure in protein fragments. Reactivation of reduced hen egg lysozyme fragment 1-127.

Regeneration of enzymic activity from reduced hen egg lysozyme peptide 1-127 was effected with a glutathione oxidation-reduction buffer. The rate of regeneration was nearly as great for peptide 1-127 as for reduced lysozyme itself, and the yields were the same (greater than 80%). The regenerated fragment 1-127 was shown to be indistinguishable from fragment 1-127 before reduction by ion exchange chromatography, amino acid analysis, polyacrylamide gel electrophoresis, and disulfide analysis. These results show that the COOH-terminal dipeptide Arg-Leu is not essential for the acquisition of the native three-dimensional structure of lysozyme.     

Fast heme release from inactive proteins

Kinetics for the release of the prosthetic group from hemoproteins is presented. Heme-protein separation is a biphasic reaction, where an initial phase is significantly faster than the dominant, slow phase. A previous communication concluded that the slow phase represents the active protein. This communication presents data for porphyrin release which shows that the initial fast phase represents an inactive form of the protein. Moreover, we suggest that the fast to slow phase ratio is a sensitive monitor of sample quality for many hemoproteins and that an extrapolation of the slow phase absorbance leads to new estimates for the true physical parameters of unperturbed proteins.     

Reactivation of covalently immobilized lipase from Thermomyces lanuginosus

Lipase from Thermomyces lanuginosus (TLL) immobilized on cyanogen bromide agarose (CNBr) may be fully inactivated when incubated in saturated solutions of guanidine. When this inactivated enzyme is re-incubated in aqueous medium, 20% of the activity may be recovered for several cycles. However, if the activity was determined in the presence of a detergent (CTAB, an activator of this enzyme), 100% of the initial activity in the presence of detergent was recovered. The enzyme was also inactivated in the presence of organic solvents and at high temperatures. Inactivations were more rapid when the activity was determined in absence of detergent. In both cases, some activity could be recovered just by incubation under mild conditions, and this increase was higher if the activity measurements were performed in the presence of CTAB. These results suggested that the opening of the lipase could be a critical step in the inactivation or reactivation of immobilized TLL. In inactivations in the presence of solvents, 100% of activity could be recovered during several cycles, while in thermal inactivations, the recovered activity decreased in each inactivation–reactivation cycle. The incubation of the enzyme inactivated by temperature in guanidine improved the results, but still 100% could not be achieved during several cycles even measured in the presence of CTAB.Thus, the simple incubation of the partially or fully inactivated enzyme under mild conditions permitted to recover some activity (enhancing the half life of the biocatalysts), even in thermal inactivations.     

Reactivation of 3-phosphoglycerate kinase from its unfolded proteolytic fragments

Limited trypsinolysis of pig muscle 3-phosphoglycerate kinase yielded a nicked enzyme without loss of catalytic activity [Jiang, S. X. & Vas, M. (1988) FEBS Lett. 231, 151-154]. The reactivation rate of the nicked enzyme after denaturation does not differ substantially from the reactivation rate of the denatured intact enzyme: t 1/2 varies between 70-110 s at 25 degrees C, pH 7.0 in both cases. Thus, the absence of a covalent linkage between the two proteolytic fragments of the enzyme molecule apparently does not affect the refolding. The two proteolytic fragments can be separated by FPLC under denaturing conditions. Fluorescence spectra of the isolated fragments may indicate that the tryptic cleavage site is within the N-terminal domain. Thus, the larger fragment (molecular mass about 30 kDa) probably contains the whole nucleotide-binding C-terminal domain plus a small part of the N-terminal domain. The inactive isolated fragments were used in renaturation experiments to study the reassembly of active 3-phosphoglycerate kinase. Kinetic measurements revealed the presence of a bimolecular rate-limiting step of reactivation. Separate preincubation of the fragments under renaturing conditions did not cause substantial acceleration of reactivation. This implies that assembly of the separate structural units (possibly domains) may limit the reactivation of the intact enzyme.     

Nitrous Acid Reactivation of Ultraviolet-Irradiated Transforming DNA from Hemophilus influenzae

Partial recovery of ultraviolet-damaged denatured or native transforming DNA from Hemophilus influenzae, has been obtained by exposing the irradiated DNA in the denatured form to nitrous acid. Some factors that affect this recovery are described. An erythromycin marker (E₂₀) was not reactivated. The UV damage reactivable by nitrous acid is different from that repaired by the photoreactivating enzyme from bakers' yeast. The pretreatment with nitrous acid affords a slight protection for denatured C₂₅ DNA and Sm₂₅₀ DNA against ultraviolet irradiation, but this pretreatment sensitized the E₂₀ DNA to this irradiation.     

On inactive precursor of cathepsin D from chicken liver

Two enzyme preparations (components 1 and 11) were isolated from chicken liver by means of DEAE-cellulose chromatography. The highest proteolytic activity was seen in the zone of comparatively low protein concentration. Storage of the isolated first component in acid medium at pH 3 resulted in considerable increase of its activity, as well as in increase of its ability to bind to diazocarboxyl inhibitor. In the course of this reaction an additional, highly active component and an inactive, low-molecular-weight fraction were formed.     

Structure of phage P22 gene 19 lysozyme inferred from its homology with phage T4 lysozyme. Implications for lysozyme evolution

The amino acid sequence of the lysozyme from phage P22 is shown to be homologous (26% identity) with the lysozyme from bacteriophage T4. The sequence correspondence suggests that the structure of P22 lysozyme is similar to the known structure of T4 lysozyme within the "core" of the molecule, including the active site cleft. However, P22 lysozyme appears to lack two surface loops present in T4 lysozyme. It is possible that P22 lysozyme may provide an "evolutionary link" between the phage-type lysozymes and the goose-type lysozymes.     

Small angle neutron scattering from lysozyme solutions in unsaturated and supersaturated states (SANS from lysozyme solutions)

Small angle neutron scattering (SANS) method was used to study lysozyme solutions, with particular interest in an understanding of the crystallization process at the initial stage. It is found that (1) in the unsaturated solution, the protein molecules aggregate with a continuous increase in size when NaCl concentration is increased, and (2) in the supersaturated solution, an irreversible change, superimposed on the former process, occurs when the supersaturation is realized. These facts indicate the usefulness of SANS in detecting changes of protein molecules in solution on the nanometer scale. The reliability of the SANS results are indicated by (1) comparing them with those of small angle X-ray scattering (SAXS), and (2) comparing the effect of D(2)O and H(2)O as solvent. Since the interparticle interaction is essential in the crystallization process and a simple Guinier plot analysis is not allowed, a more rigorous framework of analyzing data with interference function is developed, through which both average interparticle distance and particle size are estimated.