Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.     

Effects of the cooling mode on the structure and strength of porous scaffolds made of chitosan,alginate, and carboxymethyl cellulose by the freeze-gelation method

A freeze-gelation method was utilized to prepare porous scaffolds made of chitosan, alginate, and carboxymethyl cellulose because of their usefulness in tissue engineering applications. These polysaccharide solutions were cooled down to freezing using either a fast-cooling (FC) mode (>20 °C/min) or a slow-cooling (SC) mode (0.83 °C/min). Then the frozen polysaccharide solutions were immersed in their respective non-solvents to form porous scaffolds. Based on the SEM and optical microscope images of the scaffolds, the FC mode induced non-simultaneous nucleation and generated directional pore structures. In contrast, simultaneous nucleation and uniform and isotropic pore structures (mean pore size: 60–100 μm) were obtained by using the SC mode. Moreover, the tensile strength of the scaffolds prepared by the SC mode (about 60 N/g) was three times higher than that of scaffolds prepared by the FC mode (about 20 N/g). This study reveals that when using the freeze-gelation method, the cooling rate (mode) is a crucial factor which controls the pore structure and strength of porous scaffolds. Therefore, our results suggest that polysaccharide scaffolds with pore structures suitable for tissue engineering applications can be obtained via an appropriate cooling mode.     

Cross-linking chitosan into UV-irradiated cellulose fibers for the preparation of antimicrobial-finished textiles

Chitosan cross-linked cellulose fibers were prepared using non-toxic procedures in order to confer antimicrobial properties to cellulose fibers. Citric acid was used as the cross-linker and NaH₂PO₄ as catalyst in previously UV-irradiated cellulose fibers. Further heat dried-cure process and washing with detergent, water and acetic acid (0.1 M) gave a maximum incorporation of chitosan of 27 mg per gram of functionalized textile. The thermogravimetric analysis of the material with the highest chitosan content showed an increased thermal stability compared to cellulose and chitosan. The UV-irradiation induced morphological changes, such as less entangled cellulose fibers, as observed by scanning electron microscopy, which was prompted to enhance the chitosan incorporation. The biomass and spore germination percentage of Penicillium chrysogenum and colony forming units per millilitre for Escherichia coli decreased significantly on the composed materials as compared to raw cellulose fiber and it was similar to that obtained with a commercial antimicrobial cellulose fiber.     

Sequential immobilization of urease to glycidyl methacrylate grafted sodium alginate

Objective of this study is to realize appropriate enzyme immobilization onto a suitable support material and to develop a model which enables reactions catalyzed with different enzymes arranged in order. Thence, this model was potential for developing a multi-enzyme system. The reactions need more than one enzyme can be realized using immobilized form of them and the enzymes will be in one support at wanted activities. In this study, sodium alginate was used as immobilization material and glycidyl methacrylate was grafted onto sodium alginate. Thus reactive epoxy groups were added to sodium alginate which also has carboxyl groups. Average molecular weight of sodium alginate was determined using Ubbelohde viscosimetri. The molecular mass of sodium alginate was calculated as 15,900 Da. Graft polymerization was made in two steps. Firstly, sodium alginate was activated with benzophenone using UV-light at 254 nm. Secondly, glycidyl methacrylate was grafted under UV-light at 365 nm onto activated sodium alginate. Grafted glycidyl methacrylate was determined gravimetric and titrimetric. Additional groups after grafting were showed with FT-IR spectrum. 1-Ethyl-3-(3-dimetylaminopropyl)-carbodiimide was used for immobilization urease from carboxyl groups at pH 5.0. Suitable 1-ethyl-3-(3-dimetylaminopropyl)-carbodiimide/–COOH ratio was found 1/10 and immobilized product activity was 197 U/g support. Reaction medium pH was 8.0 for immobilization from epoxy group. Optimum immobilization reaction time was found as 2 h and immobilized product activity was 285 U/g support. Sequential immobilization of urease to glycidyl methacrylate grafted sodium alginate was made from –COOH and epoxy groups, respectively.     

Do surface electromyograms provide physiological estimates of conduction velocity from the medial gastrocnemius muscle?

Muscle fiber conduction velocity (CV) is commonly estimated from surface electromyograms (EMGs) collected with electrodes parallel to muscle fibers. If electrodes and muscle fibers are not located in parallel planes, CV estimates are biased towards values far over the physiological range. In virtue of their pinnate architecture, the fibers of muscles such as the gastrocnemius are hardly aligned in planes parallel to surface electrodes. Therefore, in this study we investigate whether physiological CV estimates can be obtained from the gastrocnemius muscle. Specifically, with a large grid of 16 × 8 electrodes we map CV estimates over the whole gastrocnemius muscle while eleven subjects exerted isometric plantar flexions at three different force levels. CV was estimated for couples of single differential EMGs and estimate locations (i.e., channels) were classified as physiological and non-physiological, depending on whether CV estimates were within the physiological range (3–6 ms^?1) or not. Physiological CV values could be estimated from a markedly small muscle region for eight participants; channels providing physiological CV estimates corresponded to about 5% of the total number of channels. As expected, physiological and non-physiological channels were clustered in distinct regions. CV estimates within the physiological range were obtained for the most distal gastrocnemius portion (ANOVA, P < 0.001), where occurrences of propagating potentials were often verified through visual analysis. For the first time, this study shows that CV might be reliably assessed from surface EMGs collected from the most distal gastrocnemius region.     

Purification and characterization of a Na+/K+ dependent alginate lyase from turban shell gut Vibrio sp. YKW-34

An alginate lyase with high specific enzyme activity was purified from Vibrio sp. YKW-34, which was newly isolated from turban shell gut. The alginate lyase was purified by in order of ion exchange, hydrophobic and gel filtration chromatographies to homogeneity with a recovery of 7% and a fold of 25. This alginate lyase was composed of a single polypeptide chain with molecular mass of 60 kDa and isoelectric point of 5.5–5.7. The optimal pH and temperature for alginate lyase activity were pH 7.0 and 40 °C, respectively. The alginate lyase was stable over pH 7.0–10.0 and at temperature below 50 °C. The alginate lyase had substrate specificity for both poly-guluronate and poly-mannuronate units. The k_cat/K_m value for alginate (heterotype) was 1.7 × 10⁶ s⁻¹ M⁻¹. The enzyme activity was completely lost by dialysis and restored by addition of Na⁺ or K⁺. The optimal activity exhibited in 0.1 M of Na⁺ or K⁺. This enzyme was resistant to denaturing reagents (SDS and urea), reducing reagents (β-mercaptoethanol and DTT) and chelating reagents (EGTA and EDTA).     

Dried alginate-entrapped enzymes (DALGEEs) and their application to the production of fructooligosaccharides

A modification of the classical calcium alginate enzyme entrapment technique is described aiming to overcome some of the limitations of the former gel-based biocatalysts. Dried alginate entrapped enzymes (DALGEEs) were obtained dehydrating calcium alginate gel beads containing entrapped enzymes. A fructosyltransferase from Aspergillus aculeatus, present in Pectinex Ultra SP-L, was entrapped using this technique. The resulting DALGEEs were successfully tested both operating batchwise and in a continuous fixed-bed reactor for fructooligosaccharides (FOS) synthesis from sucrose. Interestingly, DALGEEs did not re-swell upon incubation in concentrated (600 g/L) sucrose solutions, probably due to the lowered water activity (a_w) of such media. Confocal laser scanning microscopy of DALGEEs revealed that the enzyme molecules accumulated preferably in the shell of the particles. DALGEEs showed an approximately 30-fold higher volumetric activity (300 U/mL) compared with the calcium alginate gel beads. Moreover, a significant enhancement (40-fold) of the space-time-yield of fixed-bed bioreactors was observed when using DALGEEs as biocatalyst compared with gel beads (4030 g/day L of FOS vs. 103 g/day L). The operational stability of fixed-bed reactors packed with DALGEEs was extraordinary, providing a nearly constant FOS composition of the outlet during at least 700 h. It was also noticeable their resistance against microbial attack, even after long periods of storage at room temperature. The DALGEEs immobilisation strategy may also be useful for other biotransformations, in particular when they take place in low a_w media.     

Advanced glycation end-products diminish tendon collagen fiber sliding

Connective tissue aging and diabetes related comorbidity are associated with compromised tissue function, increased susceptibility to injury, and reduced healing capacity. This has been partly attributed to collagen cross-linking by advanced glycation end-products (AGEs) that accumulate with both age and disease. While such cross-links are believed to alter the physical properties of collagen structures and tissue behavior, existing data relating AGEs to tendon mechanics is contradictory. In this study, we utilized a rat tail tendon model to quantify the micro-mechanical repercussion of AGEs at the collagen fiber-level. Individual tendon fascicles were incubated with methylglyoxal (MGO), a naturally occurring metabolite known to form AGEs. After incubation in MGO solution or buffer only, tendons were stretched on the stage of a multiphoton confocal microscope and individual collagen fiber stretch and relative fiber sliding were quantified. Treatment by MGO yielded increased fluorescence and elevated denaturation temperatures as found in normally aged tissue, confirming formation of AGEs and related cross-links. No apparent ultrastructural changes were noted in transmission electron micrographs of cross-linked fibrils. MGO treatment strongly reduced tissue stress relaxation (p < 0.01), with concomitantly increased tissue yield stress (p < 0.01) and ultimate failure stress (p = 0.036). MGO did not affect tangential modulus in the linear part of the stress–strain curve (p = 0.46). Microscopic analysis of collagen fiber kinematics yielded striking results, with MGO treatment drastically reducing fiber-sliding (p < 0.01) with a compensatory increase in fiber-stretch (p < 0.01). We thus conclude that the main mechanical effect of AGEs is a loss of tissue viscoelasticity driven by matrix-level loss of fiber–fiber sliding. This has potentially important implications to tissue damage accumulation, mechanically regulated cell signaling, and matrix remodeling. It further highlights the importance of assessing viscoelasticity – not only elastic response – when considering age-related changes in the tendon matrix and connective tissue in general.     

Polysaccharides from Sargassum tenerrimum: Structural features,chemical modification and anti-viral activity

Herpes simplex viruses (HSVs) display affinity for cell-surface heparan sulfate proteoglycans with biological relevance in virus entry. Here, we exploit an approach to inhibiting HSV infection by using a sulfated fucoidan, and a guluronic acid-rich alginate derived from Sargassum tenerrimum, mimicking the active domain of the entry receptor. These macromolecules have apparent molecular masses of 30 ± 5 and 26 ± 5 kDa, respectively. They and their chemically sulfated derivatives showed activity against herpes simplex virus type 1 (HSV-1). Their inhibitory concentration 50% (IC₅₀) values were in the range 0.5–15 μg/ml and they lacked cytotoxicity at concentrations up to 1000 μg/ml. The anti-HSV activity increased with increasing sulfate ester content. Our results suggest the feasibility of inhibiting HSV infection by blocking viral entry with polysaccharide having specific structure.     

Effects of diets of differing fiber contents on digestibility,passage rate of digesta and heat production in lesser mouse deer (Tragulus javanicus)

The effects of different levels of dietary fiber on feed intake, digestibility, mean retention times of solute and particle and heat production were studied in twelve male lesser mouse deer (Tragulus javanicus). The animals were randomly assigned into four groups of three mouse deer each and fed on individual basis. Four diets, namely A, B, C and D were prepared in pellet forms. Each diet contained ～14% crude protein and ～18 kJ/g gross energy. The crude fiber contents of diet A, B, C and D were 4.2, 11.3, 16.8 and 22.5%, respectively. The results showed that the crude fiber intake of mouse deer was 1.4 ± 0.04, 3.8 ± 0.4, 5.8 ± 0.7 and 6.0 ± 0.6 g/kg W^0.75/d fed diet A, B, C and D, respectively. Mouse deer fed diet D had significantly lower DM intake than those fed lower levels of fiber. The digestibility values of DM decreased gradually with increasing levels of fiber in the diet. The mean retention times (MRTs) of particles (～1.5 mm) in the reticulorumen were in the range of (19.0–22.9 h), with the shortest time for mouse deer fed diet D. However mouse deer fed diet C and D showed significant shorter solute MRT in the reticulorumen (17.1–18.5 h) when compared to mouse deer fed lower fiber diets (21.4–21.9 h). The selectivity factor in the reticulorumen was in the range of 1.04–1.18, indicating the mouse deer to be a ‘moose-type’ ruminant. Fiber levels had no significant effect on water intake of mouse deer. Heat production tended to decrease with increasing levels of fiber (448.3–435.7 kJ/kg W^0.75/d) but differences among the mouse deer fed the four diets were not significant.     

Tolerance,accumulation and distribution of zinc and cadmium in hyperaccumulator Potentilla griffithii

In this study, zinc (Zn) and cadmium (Cd) tolerance, accumulation and distribution was conducted in Potentilla griffithii H., which has been identified as a new Zn hyperaccumulator found in China. Plants were grown hydroponically with different levels of Zn²⁺ (20, 40, 80 and 160 mg L^?1) and Cd²⁺ (5, 10, 20 and 40 mg L^?1) for 60 days. All plants grew healthy and attained more biomass than the control, except 40 mg L^?1 Cd treatment. Zn or Cd concentration in plants increased steadily with the increasing addition of Zn or Cd in solution. The maximum metal concentrations in roots, petioles and leaves were 14,060, 19,600 and 11,400 mg kg^?1 Zn dry weight (DW) at 160 mg L^?1 Zn treatment, and 9098, 3077 and 852 mg kg^?1 Cd DW at 40 mg L^?1 Cd treatment, respectively. These results suggest that P. griffithii has a high ability to tolerate and accumulate Cd and Zn, and it can be considered not only as Zn but also as a potential cadmium hyperaccumulator. Light microscope (LM) with histochemical method, scanning electron microscope combined with energy dispersive spectrometry (SEM-EDS) and transmission electron microscope (TEM) were used to determine the distribution of Zn and Cd in P. griffithii at tissue and cellular levels. In roots, SEM-EDS confirmed that the highest Zn concentration was found in xylem parenchyma cells and epidermal cells, while for Cd, a gradient was observed with the highest Cd concentration in rhizodermal and cortex cells, followed by central cylinder. LM results showed that Zn and Cd distributed mainly along the walls of epidermis, cortex, endodermis and some xylem parenchyma. In leaves, Zn and Cd shared the similar distribution pattern, and both were mostly accumulated in epidermis and bundle sheath. However, in leaves of 40 mg L^?1 Cd treatment, which caused the phytotoxicity, Cd was also found in the mesophyll cells. The major storage site for Zn and Cd in leaves of P. griffithii was vacuoles, to a lesser extent cell wall or cytosol. The present study demonstrates that the predominant sequestration of Zn and Cd in cell walls of roots and in vacuoles of epidermis and bundle sheath of leaves may play a major role in strong tolerance and hyperaccumulation of Zn and Cd in P. griffithii.     

Immobilization of Candida rugosa lipase on electrospun cellulose nanofiber membrane

A biocatalyst with high activity retention of lipase was fabricated by the covalent immobilization of Candida rugosa lipase on a cellulose nanofiber membrane. This nanofiber membrane was composed of nonwoven fibers with 200 nm nominal fiber diameter. It was prepared by electrospinning of cellulose acetate (CA) and then modified with alkaline hydrolysis to convert the nanofiber surface into regenerated cellulose (RC). The nanofiber membrane was further oxidized by NaIO₄. Aldehyde groups were simultaneously generated on the nanofiber surface for coupling with lipase. Response surface methodology (RSM) was applied to model and optimize the modification conditions, namely NaIO₄ content (2–10 mg/mL), reaction time (2–10 h), reaction temperature (25–35 °C) and reaction pH (5.5–6.5). Well-correlating models were established for the residual activity of the immobilized enzyme (R² = 0.9228 and 0.8950). We found an enzymatic activity of 29.6 U/g of the biocatalyst was obtained with optimum operational conditions. The immobilized lipase exhibited significantly higher thermal stability and durability than equivalent free enzyme.     

Debranching enzyme concentration effected on physicochemical properties and α-amylase hydrolysis rate of resistant starch type III from amylose rice starch

The effect of debranching enzyme concentration on physicochemical properties and α-amylase hydrolysis rate of resistant starch type III from high amylose rice starch were studied. The pullulanase enzyme (8, 10, 12, 14 and 16 U/g starch) was introduced to modify amylopectin molecules of 15% (w/w) gelatinized rice starches at 55 °C for 16 h. The debranched starches with different degrees of hydrolysis (0.14–5.27%), and having 66.60–98.82% β-amylolysis limit were then induced at 4 °C for 16 h, afterward a one cycle of freeze–thaw process (?10/30 °C) was applied. The results showed that a pullulanase hydrolysis improved the degree of syneresis (51.64–54.85% from 8 to 16 U/g starch). Resistant starch content increased sharply as the amount of the enzyme increased, reaching the highest (19.81%) for a 12 U/g starch and decreased to 13.16% by 16 U/g starch. α-Amylase hydrolysis rate showed that incompletely-debranched had a lower estimated glycemic index than completely debranched rice starches. Microstructure of the selected RS III samples using X-ray diffraction and scanning electron microscopy revealed a crystal pattern change from A- to V-type pattern and formed a coarse honeycomb-like and a filamentous network structure.     

An efficient synthesis and biological screening of benzofuran and benzo[d]isothiazole derivatives for Mycobacterium tuberculosis DNA GyrB inhibition

A series of twenty eight molecules of ethyl 5-(piperazin-1-yl)benzofuran-2-carboxylate and 3-(piperazin-1-yl)benzo[d]isothiazole were designed by molecular hybridization of thiazole aminopiperidine core and carbamide side chain in eight steps and were screened for their in vitro Mycobacterium smegmatis (MS) GyrB ATPase assay, Mycobacterium tuberculosis (MTB) DNA gyrase super coiling assay, antitubercular activity, cytotoxicity and protein–inhibitor interaction assay through differential scanning fluorimetry. Also the orientation and the ligand–protein interactions of the top hit molecules with MS DNA gyrase B subunit active site were investigated applying extra precision mode (XP) of Glide. Among the compounds studied, 4-(benzo[d]isothiazol-3-yl)-N-(4-chlorophenyl)piperazine-1-carboxamide (26) was found to be the most promising inhibitor with an MS GyrB IC₅₀ of 1.77 ± 0.23 μM, 0.42 ± 0.23 against MTB DNA gyrase, MTB MIC of 3.64 μM, and was not cytotoxic in eukaryotic cells at 100 μM. Moreover the interaction of protein–ligand complex was stable and showed a positive shift of 3.5 °C in differential scanning fluorimetric evaluations.     

Two novel cosegregating mutations in tRNAMet and COX III,in a patient with exercise intolerance and autoimmune polyendocrinopathy

We report a 12-year-old patient with growth retardation, exercise intolerance, lactic acidosis (increasing after exercise) and autoimmune polyendocrinopathy type 2. Muscle biopsy shows abundant COX-negative fibers, subsarcolemmal mitochondrial aggregates and markedly reduced activities of all respiratory chain complexes. Genetic analysis identified two new cosegregating mutations in Met-tRNA (m.4415A > G) and Cox III (m.9922A > C), located in highly conserved regions of MtDNA. Both the mutations are heteroplasmics in multiple patients’ tissues. Single-muscle fiber analysis showed significantly higher levels of both the mutations in COX-negative than in normal fibers. In addition, a possible link between the mitochondrial dysfunction and the autoimmune disease is suggested.     

Construction of a pilot plant for producing fine linen fibers for textiles

A newly built 200-L-pilot plant was used for testing a novel chemo-enzymatic process for producing fine flax fibers without the weather-associated risks of dew retting. Raw, green and decorticated flax fibers were placed inside trays in the tempered main tank of the pilot plant, where a vertically acting mechanism gently moved the parallel fiber bundles. The fibers were incubated in an alkaline bath, in a pectinolytic culture of Geobacillus thermoglucosidasius PB94A and in a peroxide-softener bath. Finally the fibers were dried, combed and hackled into a sliver that is ready for wet-spinning of linen yarns. A total of 140 kg of raw fibers were treated in 40 different experiments in the pilot plant. The resolution of the raw fibers improved from 7.3 to 2.7 ± 0.3 after the treatment. The fineness was enhanced from 37.4 dtex to 11.1 ± 1.2 dtex. The proposed pilot-plant process produced constant-quality fibers and could be easily up-scaled.     

Shape complexity of space used by American black bears influenced by sex and intensity of use

Disentangling the complexities that influence animal space use poses substantial challenges based on decision trade-offs and constraints imposed on animals. Optimal decisions suggest that the spatial complexity of home-range shapes should be inversely related to energy conservation and fitness. Hence, the most beneficial shape should be the circle. We evaluated whether shape complexity (i.e., an index of circularity) of home ranges was influenced by two extrinsic (spatial heterogeneity, preferred habitat [i.e., deciduous forest]), and three intrinsic (sex, season [breeding, non-breeding], intensity of use) factors, with intensity of use indexed as contours containing core and peripheral areas. We estimated utilization distributions of 39 radiomarked adult American black bears (Ursus americanus), a habitat generalist, using fixed-kernel techniques and estimated 50% (core area) and 95% (peripheral area) contours. We fit a set of 47 models using linear modeling and ranked models using small-sample Akaike Information Criterion. Coefficients for the best model were the intrinsic factors intensity of use (reference category = core; 0.118; 95% CL = 0.064–0.173), sex (reference = female; 0.105; 95% CL = 0.043–0.167), and intercept (0.229; 95% CL = 0.186–0.272). Shape complexity was less for core areas than peripheral areas and less for females than males. Considering complex resource selection patterns within a fragmented landscape, both sexes appeared to use energy-maximizing strategies, although the increase in shape complexity for males may be an allometric relationship based on size dimorphism. Our approach supported the phenomenon of optimality as manifested through home-range shape complexity, but we suggest that assessment of this phenomenon for habitat specialists may yield different results, including the potential importance of intrinsic factors based on more restrictive limiting factors.     

Effects of ozone fumigation on cotton (Gossypium hirsutum L.) morphology,anatomy, physiology,yield and qualitative characteristics of fibers

This experiment was conducted to study the effect of high ozone concentrations on two cotton (Gossypium hirsutum L.) cultivars. Two cotton cultivars (Romanos and Allegria) were exposed to control (CF < 4 ppb O₃) and 100 ppb O₃. Plant exposure to ozone began eight days after emergence and was interrupted one day before removing the leaves, to calculate the leaf area. Plants were exposed to ozone 7 h/day, in closed and controlled-environment chambers, during their illumination with artificial visible light.In comparison to control plants, plants exposed to O₃ showed chlorotic and necrotic patches on their leaves, increased stomatal or epidermal cell density and yellowness of cotton fibers. Elevated ozone concentration did not have a significant effect on stomatal width, total leaf thickness and thickness of histological components of leaves. Exposure to ozone concentration reduced non-glandular hair density of main leaf veins, plant height, mainstem internode length, chlorophyll content, net photosynthetic rate, stomatal conductance and length and area of bracts and petals. Elevated ozone treatment reduced the maximum length of staminal tube, anther number, pollen grain germination, leaf area, leaf dry weight, boll number, raw cotton weight, total branch length, dry weight of the mainstem–branches–bracts–carpophylls and of root dry weight. Furthermore, exposure to O₃ reduced the seed weight, the lint weight, the yield, the ratio of lint weight to seed weight, the fiber strength, the micronaire, the maturity index and the fiber uniformity index values. This study shows that the exposure to high ozone concentrations mainly affected the rate of photosynthesis, raw cotton weight and strength of cotton fibers.     

Hybrid cooling vest for cooling between exercise bouts in the heat: Effects and practical considerations

While continuous cooling strategies may induce some ergonomic problems to occupational workers, cooling between work bouts may be an alternative for cooling them down in hot environments. The purpose of this study was to assess the effects of wearing a newly designed hybrid cooling vest (HCV) between two bouts of exercise. Inside a climatic chamber set at an air temperature of 37 °C and a relative humidity of 60%, twelve male participants underwent two bouts of intermittent exercise interspersed with a 30 min between-bout recovery session, during which HCV or a passive rest without any cooling (PAS) was administered. The results indicated that thermoregulatory, physiological, and perceptual strains were significantly lower in HCV than those in PAS during the recovery session (p≤0.022), which were accompanied with a large effect of cooling (Cohen's d=0.84–2.11). For the second exercise bout, the exercise time following HCV (22.13±12.27 min) was significantly longer than that following PAS (11.04±3.40 min, p=0.005, d=1.23) During this period, core temperature T_c was significantly lower by 0.14±0.0.15 °C in HCV than that in PAS. The heart rate drift over time was declined by 2±2 bpm min⁻¹ (p=0.001, d=1.00) and the rise in physiological strain index was reduced by 0.11±0.12 unit min⁻¹ (p=0.010, d=0.96) following the use of HCV. These findings suggested that using HCV could accelerate between-bout recovery and improve subsequent exercise performance by the enlarged body core temperature margin and blunted cardiovascular drift.     

Multi-channel electromyography during maximal isometric and dynamic contractions

Motor unit behavior differs between contraction types at submaximal contraction levels, however is challenging to study during maximal voluntary contractions (MVCs). With multi-channel surface electromyography (sEMG), mean physiological characteristics of the active motor units can be extracted. Two 8-electrode sEMG arrays were attached on biceps brachii muscle (one on each head) to examine behavior of sEMG variables during isometric, eccentric and concentric MVCs of elbow flexors in 36 volunteers.On average, isometric (364 ± 88 N) and eccentric (353 ± 74 N) MVCs were higher than concentric (290 ± 73 N) MVC (p < 0.001). Mean muscle fiber conduction velocity (CV) was highest during eccentric MVC (4.42 ± 0.49 m/s) than concentric (4.25 ± 0.49 m/s, p < 0.01) and isometric (4.14 ± 0.45 m/s, p < 0.001) MVCs. Furthermore, eccentric MVC showed lower sEMG amplitude at the largest elbow joint angles (120–170°) and higher CV at the smallest (70–150°) elbow joint angles (p < 0.05–0.001) than concentric MVC.The differences in CV and sEMG amplitude between the MVCs suggest that the control strategy of motor units differs between the contraction types during MVCs, and is dependent on the muscle length between the dynamic MVCs.