Labeling studies of some carbonylation reactions of styrene with cationic palladium complexes

The dicarbonylation reaction of E-β-deuteriostyrene to syndiotactic poly(1-oxo-2-phenyltrimethylene) as well as to dimethyl-2-phenylbutanedioate and dimethyl-2,5-diphenyl-4-oxoheptanedioate using Pd(CF₃COO)₂/2,2′-bipyridine as the catalyst precursor in the presence of 1,4-benzoquinone in methanol takes place stereospecifically in a syn-fashion with complete retention of the label. The same result was found for the dicarbonylation to dimethyl 2-phenylbutanedioate catalyzed by [Pd(CF₃COO)₂(Diop)]. In the absence of the oxidant the latter catalytic system produces methyl 2- and 3-phenylpropionates for which some scrambling of deuterium is observed when using either -deuteriostyrene or CH₃OD as the labeled substrate. [Pd(CH₃CN)₄][BF₄]₂ modified with different ligands catalyses the formation of E-1,5-diphenylpent-1-en-3-one or of E-1,4-diphenylpent-1-en-3-one in tetrahydrofuran as the solvent. The label distribution using E-β-deuteriostyrene as the substrate (or styrene in the presence of dideuterium) suggests that in the synthesis of ketones catalyzed by [Pd(p-CH₃C₆H₄SO₃)₂(Dppp)]·2H₂O the regioselectivity of the first inserted olefin unit does not determine the ketone regioisomer; rather which regioisomeric product preferentially forms depends on the rate of carbon monoxide insertion in either the branched or linear metal-hydrocarbyl intermediate. β-Hydrogen elimination is very rapid both after the first and the second olefin insertion.     

Synthesis, structure, and heterogeneous catalytic activity of tungsten chalcogenide cubane cluster containing alkaline earth metal complex

A new compound containing a cubane tungsten chalcogenide cluster [W₄(μ₃-Te)₄(CN)₁₂]⁶⁻ and Ca²⁺ complex units has been prepared by the reaction of aqueous solution of K₆[W₄(μ₃-Te)₄(CN)₁₂] · 5H₂O with the solution of a Ca(NO₃)₂ and phen(1,10-phenanthroline) (1:2 molar ratio) in a solvent mixture of H₂O/EtOH. The structure of [{Ca(phen)₂(H₂O)}{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄Te₄(CN)₁₂] · 5H₂O 1 has been determined by X-ray crystallography. Compound 1 contains [{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄(μ₃- Te)₄(CN)₁₂] units bridged by {Ca(phen)₂(H₂O)}²⁺ units to form an one-dimensional zigzag chain structure. Interestingly, compound 1 showed a heterogeneous catalytic activity in the transesterification of a range of esters with methanol under the mild conditions. Moreover, it can be reused without any loss of activity through 10 runs with ester.     

Syntheses and molecular structures of ruthenium(II) complexes of the atropisomeric ligands 1,1′-biphenyl-2,2′-diamine and 3,3′-diamino-2,2′-bipyridine

The unique ligands of [Ru(bipy)₂(bpda)](PF₆)₂ (1, BPDA=1,1′-biphenyl-2,2′-diamine) and [Ru(bipy)₂(dabipy)](PF₆)₂ (2, DABIPY=3,3′-diamino-2,2′-bipyridine) are atropisomeric (exhibit hindered rotation about the sigma bonds that connect the two aromatic groups), so the complexes are diasteromeric with conformation isomers possible for the atropisomeric ligands and configurational isomers possible at the metal centers. Only one diastereomer is observed in the solid-state in both cases. The seven- (1) and five-membered (2) chelate ring of dabipy and bpda (the ligand is bound through its pyridyl groups) ligands are δ when the configuration at the metal is Δ. No evidence for atropisomerization is found in solution. For 1, we conclude bpda binds stereospecifically; however, the atropisomerization barrier of dabipy may be sufficiently low for 2 to preclude the observation of diastereomers by low-temperature NMR spectroscopy.     

N,N′-Ethylene-bis(3-methoxysalicylideneimine) mononuclear (4f) and heterodinuclear (3d–4f) metal complexes: Synthesis, crystal structure and luminescent properties

The stepwise synthesis of mononuclear (4f) and heterodinuclear (3d–4f) Salen-like complexes has been investigated through structural determination of the intermediate and final products occurring in the process. In the first step, reactions of ligand H₂L and Ln(NO₃)₃ · 6H₂O give rise to three mononuclear lanthanide complexes Ln(H₂L)(NO₃)₃ [H₂L = N,N′-ethylene-bis(3-methoxysalicylideneimine), Ln = Nd (1), Eu (2) and Tb (3)], in which N,N′-ethylene-bis(3-methoxysalicylideneimine) acts as tetradentate ligands with the O₂O₂ set of donor atoms capable of effective coordination. These species are fairly stable and have been isolated. Then, addition of Cu(Ac)₂ · H₂O to the mononuclear lanthanide complex yields expected heterodinuclear (3d–4f) complexes Cu(L)Ln(NO₃)₃ · H₂O [Ln = Nd (4) and Eu (5)] where the Cu(II) ion is inserted to the inner N₂O₂ cavity. Luminescent analysis reveals that complex 3 exhibits characteristic metal-centered fluorescence of Tb(III) ion. However, the characteristic luminescence of both Sm(III) and Eu(III) ions is not observed both in solution and solid state of the complexes.     

One-dimensional polymeric chlorocadmate(II) systems of N-methylpiperazinium and N,N′-dimethylpiperazinium compounds: synthesis, structural and thermal properties

The chlorocadmate(II) systems of (H₂me₂pipz)[Cd₂Cl₆(H₂O)₂] (1) and (H₂mepipz)₂[Cd₃Cl₁₀(H₂O)] (2) (L = me₂pipz = N,N′-dimethylpiperazine; L′ = mepipz = N-methylpiperazine) were prepared and their structural and thermal properties investigated. Compound 1 is monoclinic, space group P2₁/c, A = 7.664(1), B = 7.472(4), C = 15.347(1) Å, β = 99.468(7)°, Z = 2, R = 0.024. The crystal structure consists of organic cations and infinite one-dimensional chains of [CdCl₃(H₂O)]_n³⁻ anions. Each Cd atom is octahedrally surrounded by bridged and terminal chlorine atoms and by a water molecule, which is in trans position with respect to the terminal chlorine atom. Inter- and intrachain hydrogen bond interactions between the terminal chlorine atoms and the water molecules contribute to the crystal packing. Compound 2 is orthorhombic, space group Cmc2₁, A = 15.286(3), B = 13.354(3), C = 13.154(3) Å, R = 0.023. The crystal structure consists of organic dications and infinite chains of [Cd₂Cl₆(CdCl₄H₂O]_n⁴⁻ units running along the [001] axis. Each unit is formed of regularly alternate six-coordinated Cd atoms, one of them linking one pentacoordinated Cd atom which completes its coordination througha water molecule. A strong hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential scanning calorimetry measurements did not show the presence of any structural phase transitions. The structures are compared with those of (H₂pipz)[Cd₂Cl₆(H₂O)₂] (3), (H₂mepipz)[Cd₂Cl₆(H₂O)₂]·H₂O (4) and (H₂mepipz)[Cd₂Cl₆] (5) (L = pipz = piperazine, L′ = mepipz = N-ethylpiperazine).     

Monomeric and dimeric mixed-ligand copper(II) complexes of 2,2′-bipyridine/1,10-phenanthroline and 1-methylimidazole with imidazoles as catalysts for superoxide dismutation

Monomeric complexes [Cu(LL)(L′)(NO₃)₂] (where LL is 2,2′-bipyridine or 1,10-phenanthroline and L′ is 1-methylimidazole) and dimeric complexes [Cu₂(LL)₂(L″)]NO₃ (where L″ is an anion of imidazole or 2-methylimidazole) have been synthesized. These complexes show a d-d transition in the range of 600 to 710 nm. The infrared spectra of monomeric complexes show that the NO₃⁻ is coordinated to copper as a monodentate ligand through an oxygen atom. The ESR spectra of monomeric complexes indicate that the ligands are bonded in axial environment around copper (square pyramidal geometry) with three nitrogen donors occupying an equatorial plane. The ESR spectra of dimeric complexes show a broad signal at about G = 2 with an additional weak signal at about G = 4. This suggests that two copper atoms are in close proximity of < 7 Å. The ESR studies reveal that the formation of imidazolate-bridged binuclear copper(II) complexes from [Cu(LL)(L′)(NO₃)₂] and imidazole is pH dependent with apparent pK_a values of 8.25 to 8.30. The superoxide dismutase activity of ICu(phen)(L′)(NO₃)₂], [Cu(bipy)(L′)(NO₃)₂], and [Cu₂(bipy)₂(L′)₂(L″)]NO₃ has been measured and the latter two complexes show better activity than the former complex.     

Syntheses, spectra and crystal structures of ruthenium(II) complexes with polypyridyl: [Ru(bipy)2(phen)](ClO4)2 · H2O and [Ru(bipy)2(Me-phen)](ClO4)2

Two ruthenium(II) complexes with polypyridyl, Ru(bipy)₂(phen)](ClO₄)₂·H₂O (1) and [Ru(bipy)₂(Me-phen)](ClO₄)₂ (2), (phen = 1,10-phenanthroline, bipy = 2,2′-bipyridine, Me-phen = 5-methyl-1,10-phenanthroline), were synthesized and characterized by IR, MS and NMR spectra. Their structures were determined by single crystal X-ray diffraction techniques. The strong steric interaction between the polypyridyl ligands was relieved neither by the elongation of the Ru---N bonds nor increase of the N---Ru---N bite angles. The coordination sphere was distorted to relieve the ligand interaction by forming specific angles (δ) between the polypyridyl ligand planes and coordination planes (N---Ru---N), and forming larger twisted angles between the two pyridine rings for each bipy. The bond distances of Ru---N(bipy) and Ru---N(phen) were virtually identical with experimental error, as expected of π back-bonding interactions which statistically involve each of the ligands present in the coordination sphere.     

Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Structural determinations, magnetic and EPR studies of complexes involving the Cr(OH)2Cr unit

Five heterometallic compounds with formulae [Ba(H₂O)₄Cr₂(μ-OH)₂(nta)₂] · 3H₂O (I), [M(bpy)₂(H₂O)₂] [Cr₂(OH)₂(nta)₂] · 7H₂O, where M²⁺ = Zn, (II); Ni, (III); Co, (IV) and [Mn(H₂O)₃(bpy)Cr₂(OH)₂(nta)₂] · (bpy) · 5H₂O (V); bpy = 2,2′-bipyridine, (nta = nitrilotriacetate ion) have been prepared by reaction of I with the corresponding M^II-sulfates in the presence of 2,2′-bipyridine. Substances I–V have been characterized by magnetic susceptibility measurements, EPR and X-ray determinations. I represents a 2D coordination polymer formed by coordination of centrosymmetrical dimeric chromium(III) units and Barium cations. The 10-coordinate Ba polyhedron is completed by four water molecules. Compounds II–IV are isostructural and consist of non-centrosymmetric dimeric anions [Cr₂(μ-OH)₂(nta)₂]²⁻, complex cations [M^II(bpy)₂(H₂O)₂]²⁺ and solvate water molecules. The octahedral coordination of chromium atoms implies four donor atoms of the nta³⁻ ligands and two bridging OH groups. Multiple hydrogen bonds of coordinated and solvate water molecules link anions and cations in a 3D network. A similar [Cr₂(μ-OH)₂(nta)₂]²⁻ unit is found in V. The bridging function is performed by a carboxylate oxygen atom of the nta ligand that leads to the formation of a trinuclear complex [Mn(bpy)(H₂O)₂Cr₂(μ-OH)₂(nta)₂]. Experimental and calculated frequency and temperature dependences of EPR spectra of these compounds are presented. The fine structure appearing on the EPR spectra of compound V is analyzed in detail at different temperatures. It is established that the main part of the EPR signals is due to the transitions in the spin states of a spin multiplet with S = 2. Analyses of experimental and calculated spectra confirm the absence of interaction between metal ions (M^II) and Cr-dimers in complexes III and IV and the presence of weak Mn–Cr interactions in V. The temperature dependence of magnetic susceptibilities for I–V was fitted on the basis of the expression derived from isotropic Hamiltonian including a bi-quadratic exchange term.     

Dioxo-molybdenum(VI) and -tungsten(VI) BINOL and alkoxide complexes: Synthesis and catalysis in sulfoxidation, olefin epoxidation and hydrosilylation of carbonyl groups

The reaction of MoO₂(mes)₂ with S-H₂BINOL (mes = 2,4,6-Me₃C₆H₂; H₂BINOL = 1,1′-bi-2-naphthol) and (CF₃)₂MeCOH in THF yielded the novel dioxo-molybdenum(VI) complexes MoO₂(S-BINOL)(THF)₂ and MoO₂[OCMe(CF₃)₂]₂(THF), respectively. Similar tungsten derivatives WO₂(S-BINOL)(THF) and WO₂[OCMe(CF₃)₂]₂(THF) have been prepared by the reaction of WO₂Cl₂(DME) with the corresponding lithium salts of BINOL and 1,1,1,3,3,3-hexafluoro-2-methyl-2-propanol, respectively. Catalytic experiments have shown that MoO₂(S-BINOL)(THF)₂ is an active catalyst in the sulfoxidation of methyl phenyl sulfide and in the epoxidation of cis-cyclooctene with tert-butylhydroperoxide, under mild conditions. The BINOL complex was, however, not found to be enantioselective. In addition, the catalytic activity of the molybdenum species MoO₂(S-BINOL)(THF)₂ and MoO₂[OCMe(CF₃)₂]₂(THF) in the hydrosilylation of carbonyl groups has been explored.     

Ruthenium complexes containing tertiary phosphines and imidazole or 2,2′-bipyridine ligands

Complexes RuCl₃(PPh₃)L₂ (L = MeIm (1a, Im (1b)) and [RuCl₂(PPh₃)₂(bipy)]Cl·4H₂O (2) have been synthesized via the ruthenium(III) precursor RuCl₃(PPh₃)₂ (DMA), and characterized, including an X-ray structural analysis for 1a (MeIm = N-methylimidazole, Im = imidazole, bipy = 2,2′-bipyridyl, and DMA = N, N′-dimethylacetamide). Crystals of 1a are monoclinic, space group P2₁/n, A = 10.5491(5), B = 20.4934(9), C = 12.8285(4) Å, β = 90.166(4)°, Z = 4. The structure, which reveals a mer configuration for the chlorides, and cis-methylimidazoles, was solved by conventional heavy atom methods and was refined by full-matrix least-square procedures to R = 0.041 and R_w = 0.042 for 3328 reflections with I 3σ(I). From the RuCl₂(PPh₃)₃ precursor, the ruthenium(II) complexes RuCl₂(PPh₃)₂L₂ and [RuCl(PPh₃)L₄]Cl have been made (L = Im or MeIm), while [RuCl(dppb)Im₃]Cl has been made from [RuCl₂(dppb)]₂(μ-dppb) (dppb = Ph₂P(CH₂)₄PPh₂).     

Two new multi-cobalt-containing heteropolyoxotungstates

Two new multi-cobalt-containing polyoxotungstates K₄Na₆Co₂(H₂O)₁₂{Co(H₂O)₄[Co₂(H₂O)₁₀Co₄(H₂O)₂(B--SiW₉O₃₄)₂]₂} · 40H₂O (1) and K₁₀Na₂[Co₄(H₂O)₂(GeW₉O₃₄)₂] · 20H₂O (2) have been obtained by the routine synthetic reactions in aqueous solution. The polyoxoanion framework of 1 consists of two sandwich-type polyoxoanions [Co₄(H₂O)₂(B--SiW₉O₃₄)₂]¹²⁻ connected together by a [CoO₂(H₂O)₄] cluster to constitute the sandwich dimer, and then, four isolated Co(H₂O)₅ cations coordinate to the dimer through four μ₂-O atoms. The polyoxoanion 2 is isomorphic to the sandwich-type polyoxoanion [Co₄(H₂O)₂(B--SiW₉O₃₄)₂]¹²⁻ in 1. The magnetic property of compound 1 has been studied by measuring its magnetic susceptibility in the temperature range 2.0–300.0 K, indicating the existence of intramolecular ferromagnetic Co–Co interactions, and, the electrochemical properties of 1 and 2 are detected in the pH 4 buffer solution.     

Gold in organic synthesis Part 2. Preparation of benzyl-alkyl and-arylketones via C---C coupling

Reaction of [Au(η²-Ar){CH₂C(O)R}Cl] (Ar=C₆H₄N=N- Ph-₂, R=Me, C₆H₂(OMe)₃-3′,4′,5′; Ar=C₆H₃(N=NC₆H₄Me- 4′)-2, Me-5, R=Me) with PPh₃ and NaClO₄·H₂O (1:2:1) at room temperature, leads to reductive elimination giving [Au(PPh₃)₂]ClO₄ and the corresponding carbon-carbon coupling product ArCH₂C(O)R. A similar process takes place when complexes [Au(η²-Ar){CH₂C(O)R}(PPh₃)Cl] are refluxed in tetrahydrofuran, through elimination of [Au(PPh₃)Cl].     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

1D copper(II) and zinc(II) coordination polymers containing an unusual twisted oxalate bridge

Two new copper(II) complexes, Cu(L1)(ClO₄)₂ (1), {[(μ-oxalate)Cu(L1)] · 5H₂O}_n (2), and a zinc(II) complex, {[(μ-oxalate)Zn(L2)] · 3H₂O · 0.5DMF}_n (3) (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0^1.18,0^7.12]docosane), have been synthesized and characterized by X-ray crystallography. In 1, the ligand conformation is planar, and the octahedral coordination about the copper(II) ion is completed by weakly interacting ions. In 2 and 3, bridging oxalate ligands coordinate to copper(II) or zinc(II) ions in an unusually twisted bis-monodentate (trans-1,1′-bicoordination) mode.

The rigidity and steric hindrance of macrocycles L1 and L2 by the introduction of two cyclohexane rings and methyl groups on a cyclam (1,4,8,11-tetraazacyclotetradecane) skeleton cause the bridging oxalate ligands to adopt such unusual geometries in 2 and 3.     

Synthesis and characterization of polypyridineruthenium(II) complexes containing a linear ambidentate ligand, NCO or NCS, and reaction of isocyanato complexes under acidic conditions

Isocyanato and isothiocyanatopolypyridineruthenium complexes, [Ru(NCX)Y(bpy)(py)₂]ⁿ⁺ (bpy=2,2′-bipyridine, PY=pyridine; X=O, Y=NO₂ for n=0, and Y=py for n=1; X=S, Y=NO₂ for n=0, Y=NO for n=2, and Y=py for n=1), were synthesized by the reaction of polypyridineruthenium complexes with potassium cyanate or sodium thiocyanate salt. Isocyanatoruthenium(II) complexes, [Ru(NCO)(NO₂)(bpy)(py)₂] and [Ru(NCO)(bpy)(py)₃]⁺, react under acidic conditions to form the corresponding ammineruthenium complexes, [Ru(NO)(NH₃)(bpy)(py)₂]³⁺. The molecular structures of [Ru(NCO)(bpy)(py)₃]ClO₄, [Ru(NCS)(NO)(bpy)(py)₂](PF₆)₂ and [Ru(NO)(NH₃)(bpy)(py)₂](PF₆)₃ were determined by X-ray crystallography.     

One-dimensional copper phosphonates containing μ-halide, μ-pyridyl N-oxide and phosphonate bridging ligands

This paper reports the syntheses and characterization of four copper phosphonates with chain structures based on (2-pyridyl-N-oxide)phosphonate, namely, [Cu₂X₂(C₅H₄NOPO₃)₂][Cu(H₂O)₆] · 2H₂O [X = Cl (1), Br (2)] and CuX(C₅H₄NOPO₃H) · H₂O [X = Cl (3), Br (4)]. Compounds 1 and 2 are isostructural and show a chain structure where Cu(1) and Cu(2) are triply bridged by halide, oxygen donor of the pyridyl N-oxide and O–P–O group. The [Cu(H₂O)₆]²⁺ serves as a charge-balancing cation and locate between the chains together with the water molecules. Compounds 3 and 4 are also isostructural. In these cases, one of the three phosphonate oxygen atoms is protonated, thus leading to a neutral chain structure which is very similar to the anionic chains in compounds 1 and 2. Magnetic studies of compounds 1–4 reveal that antiferromagnetic interactions are mediated between the copper ions.     

Polynuclear copper(II) complexes with μ2-1,1-azide bridges. Structural and magnetic properties

Two novel, weakly antiferromagnetically coupled, tetranuclear copper(II) complexes [Cu₄(PAP)₂(μ₂-1,1-N₃)₂(μ₂-1,3-N₃)₂(μ₂-CH₃OH)₂(N₃)₄ (1) (PAP = 1,4-bis-(2′-pyridylamino)phthalazine) and [Cu₄(PAP3Me)₂ (μ₂-1,1-N₃)₂(μ₂-1,3-N₃)₂(H₂O)₂(NO₂)₂]- (NO₃)₂ (2) (PAP3Me = 1,4-bis-(3′-methyl-2′-pyridyl)aminophthalazine) contain a unique structural with two μ₂-1,1-azide intramolecular bridges, and two μ₂-1,3-azide intermolecular bridges linking pairs of copper(II) centers. Four terminal azide groups complete the five-coordinate structures in 1, while two terminal waters and two nitrates complete the coordination spheres in 2. The dinuclear complexes [Cu₂(PPD)(μ₂-1,1-N₃)(N₃)₂(CF₃SO₃)]CH₃OH) (3) and [Cu₂(PPD)(μ₂-1,1-N₃)(N₃)₂(H₂O)(ClO₄)] (4) (PPD = 3,6-bis-(1′-pyrazolyl)pyridazine) contain pairs of copper centers with intramolecular μ₂-1,1-azid and pyridazine bridges, and exhibit strong antiferromagnetic coupling. A one-dimensional chain structure in 3 occurs through intermolecular μ₂-1,1-azide bridging interactions. Intramolecular Cu-N₃-Cu bridge angles in 1 and 2 are small (107.9 and 109.4°, respectively), but very large in 3 and 4 (122.5 and 123.2°, respectively), in keeping with the magnetic properties. 2 crystallizes in the monoclinic system, space group C2/c with a = 26.71(1), b = 13.51(3), c = 16.84(1) Å, β = 117.35(3)° and R = 0.070, R_w = 0.050. 3 crystallizes in the monoclinic system, space group P2₁/c with a = 8.42(1), b = 20.808(9), c = 12.615(4) Å, β = 102.95(5)° and R = 0.045, R_w = 0.039. 4crystallizes in the triclinic system, space group P1, with a = 10.253(3), b = 12.338(5), c = 8.072(4) Å, = 100.65(4), β = 101.93(3), γ = 87.82(3)° and R = 0.038, R_w = 0.036 . The magnetic properties of 1 and 2 indicate the presence of weak net antiferromagnetic exchange, as indicated by the presence of a low temperature maximum in χ_m (80 K (1), 65 K (2)), but the data do not fit the Bleaney-Bowers equation unless the exchange integral is treated as a temperature dependent term. A similar situation has been observed for other related compounds, and various approaches to the problem will be discussed. Magnetically 3 and 4 are well described by the Bleaney-Bowers equation, exhibiting very strong antiferromagnetic exchange (− 2J = 768(24) cm⁻¹ (3); − 2J = 829(11) cm⁻¹ (4)).     

Triphenylbismuth seven-coordinate complexes of molybdenum(II) and tungsten(II)

The seven-coordinate complexes [MI₂(CO)₃(NCMe)₂] (M = Mo and W) react with one equivalent of BiPh₃ in CH₂Cl₂ at room temperature to give the monoacetonitrile complexes [MI₂(CO)₃(NCMe)(BiPh₃)]. The molybdenum complex [MoI₂(CO)₃(NCMe)(BiPh₃)] after stirring in CH₂Cl₂ at room temperature for 5 h affords the iodide-bridged dimer [Mo(μ-I)I(CO)₃(BiPh₃)]₂, whereas the tungsten complex [WI₂(CO)₃(NCMe)(BiPh₃)] does not appear to dimerise even after stirring for 48 h in CH₂Cl₂ at room temperature. Reaction of [MI₂(CO)₃(NCMe)₂] with two equivalents of BiPh₃ gives the bistriphenylbismuth compounds [MI₂(CO)₃(BiPh₃)₂] in good yield. The new mixed ligand complexes [MI₂(CO)₃L(BiPh₃)] were prepared either by reaction of [MI₂(CO)₃(NCMe)(BiPh₃)]in situ with one equivalent of L(L = P(OPh)₃), or an in situ reaction of [MI₂(CO)₃(NCMe)L] (L = PPh₃ and SbPh₃; and L = AsPh₃ and PPh₂Cy (for M = Mo only) with an equimolar quantity of BiPh₃. Reaction of [MoI₂(CO)₃(NCMe)(BiPh₃)] with one equivalent of 2,2′-bipyridyl (bipy) in CH₂Cl₂ at room temperature afforded the cationic complexes [MoI(CO)₃(bipy)(BiPh₃)]I in good yield. The complex [WI₂(CO)₃(NCMe)(BiPh₃)] (prepared in situ) reacts with two equivalents of NaS₂CNMe₂·2H₂O to eventually give the non-triphenylbismuth containing product [W(CO)₃(S₂CNMe₂)₂] in high yield.     

Nitrogen atom transfer and redox chemistry of terpyridyl phosphoraniminato complexes of osmium (IV)

Rapid reactions occur between [Os^VI(tpy)(Cl)₂(N)]X (X = PF₆⁻, Cl⁻, tpy = 2,2′:6′,2″-terpyridine) and aryl or alkyl phosphi nes (PPh₃, PPh₂Me, PPhMe₂, PMe₃ and PEt₃) in CH₂Cl₂ or CH₃CN to give [Os^IV(tpy)(Cl)₂(NPPh₃)]⁺ and its analogs. The reaction between trans-[Os^VI(tpy)(Cl)₂(N)]⁺ and PPh₃ in CH₃CN occurs with a 1:1 stoichiometry and a rate law first order in both PPh₃ and Os^VI with k(CH₃CN, 25°C) = 1.36 ± 0.08 × 10⁴ M⁻ s⁻¹. The products are best formulated as paramagnetic d⁴ phosphoraniminato complexes of Os^IV based on a room temperature magnetic moment of 1.8 μ_B for trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆), contact shifted ¹H NMR spectra and UV-Vis and near-IR spectra. In the crystal structures of trans-[Os^IV(tpy)(Cl)₂( NPPh₃)](PF₆)·CH₃CN (monoclinic, P2₁/n with a = 13.384(5) Å, b = 15.222(7) Å, c = 17.717(6) Å, β = 103.10(3)°, V = 3516(2) ų, Z = 4, R_w = 3.40, R_w = 3.50) and cis-[Os^IV(tpy)(Cl)₂(NPPh₂Me)]-(PF₆)·CH₃CN (monoclinic, P2₁/c, with a = 10.6348(2) Å, b = 15.146(9) ÅA, c = 20.876(6) Å, β = 97.47(1)°, V = 3334(2) ų, Z = 4, R = 4.00, R_w = 4.90), the long Os-N(P) bond lengths (2.093(5) and 2.061(6) Å), acute Os-N-P angles (132.4(3) and 132.2(4)°), and absence of a significant structural trans effect rule out significant Os-N multiple bonding. From cyclic voltammetric measurements, chemically reversible Os^V/IV and Os^IV/III couples occur for trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) in CH₃CN at +0.92 V (Os^V/IV) and −0.27 V (Os^IV/III) versus SSCE. Chemical or electrochemical reduction of trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) gives isolable trans-Os^III(tpy)(Cl)₂(NPPh₃). One-electron oxidation to Os^V followed by intermolecular disproportionation and PPh₃ group transfer gives [Os^VI(tpy)Cl₂(N)]⁺, [OS^III(tpy)(Cl)₂(CH₃CN)]⁺ and [Ph₃=N=PPh₃]⁺ (PPN⁺). trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) undergoes reaction with a second phosphine under reflux to give PPN⁺ derivatives and Os^II(tpy)(Cl)₂(CH₃CN) in CH₃CN or Os^II(tpy)(Cl)₂(PR₃) in CH₂Cl₂. This demonstrates that the Os^VI nitrido complex can undergo a net four-electron change by a combination of atom and group transfers.