Disulfide formation within the regulatory light chain of skeletal muscle myosin

Thiol-disulfide exchange reactions between myosin and 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) lead to the formation of 5-thio-2-nitrobenzoic acid (TNB)-mixed disulfides as well as to protein disulfide bonds. After incubation with DTNB, myosin was treated with an excess of N-ethylmaleimide (NEM) before electrophoretic analysis of the protein subunits in sodium dodecyl sulfate (SDS) without prior reduction by dithiothreitol (DTT). Without NEM treatment, thiol-disulfide rearrangement reactions occurred in the presence of SDS between the residual free thiols and DTNB. In the absence of divalent metal ions at 25 degrees C, DTNB was shown to induce an intrachain disulfide bond between Cys-127 and Cys-156 of the RLC. This intrachain cross-link restricts partially the unfolding of the RLC in SDS and can be followed as a faster migrating species, RLC'. Densitometric evaluation of the electrophoretic gel patterns indicated that the stoichiometric relation of the light chains (including RLC and RLC') remained unchanged. The two cysteine residues of the fast migrating RLC' were no more available for reaction with [14C]NEM, but upon reduction with DTT, the electrophoretic mobility of the RLC' reverted to that of unmodified RLC and of the RLC modified with two TNB groups. Ca2+ or Mg2+ was able to prevent this disulfide formation in the RLC of myosin by 50% at a free ion concentration of 1.1 X 10(-8) and 4.0 X 10(-7) M, respectively, at 25 degrees C and pH 7.6. Intrachain disulfide formation of RLC never occurred in myosin at 0 degree C.(ABSTRACT TRUNCATED AT 250 WORDS)     

Intermolecular cross-links mediate aggregation of phospholipid vesicles by pulmonary surfactant protein SP-A

As the most abundant glycoprotein component of pulmonary surfactant, SP-A (Mr = 30,000-36,000) plays a central role in the organization of phospholipid bilayers in the alveolar air space. SP-A, isolated from lung lavage, exists in oligomeric forms (N = 6, 12, 18, ...), mediated by collagen-like triple helices and intermolecular disulfide bonds. These protein-protein interactions, involving the amino-terminal domain of SP-A, are hypothesized to facilitate the alignment of surfactant lipid bilayers into unique tubular myelin structures. SP-A reorganization of surfactant lipid was assessed in vitro by quantitating the calcium-dependent light scattering properties of lipid vesicle suspensions induced by SP-A. Accelerated aggregation of unilamellar vesicles required SP-A and at least 3 mM free calcium. The initial rate of aggregation was proportional to the concentration of canine SP-A over lipid:protein molar ratios ranging from 200:1 to 5000:1. Digestion with bacterial collagenase or incubation with dithiothreitol (DTT) completely blocked lipid aggregation activity. Both treatments decreased the binding of SP-A to phospholipids. The conditions used in the DTT experiments (10 mM DTT, nondenaturing Tris buffer, 37 degrees C) resulted in the selective reduction and 14C-alkylation of the intermolecular disulfide bond involving residue 9Cys, whereas the four cysteines found in the noncollagenous domain of SP-A were inefficiently alkylated with [14C]-iodoacetate. HPLC analysis of tryptic SP-A peptides revealed that these four cysteine residues participate in intramolecular disulfide bond formation (138Cys-229Cys and 207Cys-221Cys). Our data demonstrate the importance of the quaternary structure (triple helix and intermolecular disulfide bond) of SP-A for the aggregation of unilamellar phospholipid vesicles.     

Effect of oxidizing agents and sulfhydryl group reagents on beta toxin from Clostridium perfringens type C

Purified beta toxin from Clostridium perfringens type C was inactivated by the oxidizing agents o-iodosobenzoate (OIBA), oxidized glutathione, and ferricyanide, and by the sulfhydryl group regents 5,5'-dithio-bis(2-nitrobenzoic acid) (DTNB) and N-ethylmaleimide, iodoacetamide, and iodoacetic acid, causing loss of activity in various degrees depending on the concentration used. The activity of the toxin was not influenced by exposure to 1.0 mM of p-chloromercuribenzoate. The toxin treated by OIBA or DTNB was reactivated by incubation with 2-mercaptoethanol and dithiothreitol. The data suggest that beta toxin contains thiol groups which are essential for the activity.     

Human cofilin forms oligomers exhibiting actin bundling activity.

Human cofilin possesses the tendency for self-association, as indicated by the rapid formation of dimers and oligomers when reacted with water-soluble carbodiimide, Ellman's reagent, or glutathione disulfide. Intermolecular disulfide bonds involve Cys(39) and probably Cys(147) of two adjacent cofilin units. The disulfide-linked dimers and oligomers exhibit a biological activity distinct from the monomer. While monomeric cofilin decreased viscosity and light-scattering of F-actin solutions, dimers and oligomers caused an increase in viscosity and light scattering. Electron microscopy revealed that cofilin oligomers induce the formation of highly ordered actin bundles with occasionally blunt ends similar to actin-cofilin rods observed in cells under oxidative stress. Bundling activity of the disulfide-linked oligomers could be completely reversed into severing activity by dithiothreitol. Formation of cofilin oligomers occurred also in the presence of actin at pH 8, but not at pH 6.6, and was significantly enhanced in the presence of phosphatidylinositol 4,5-bisphosphate. Our data are consistent with the idea that cofilin exists in two forms in vivo also: as monomers exhibiting the known severing activity and as oligomers exhibiting actin bundling activity. However, stabilization of cofilin oligomers in cytoplasm is probably achieved not by disulfide bonds but by a local increase in cofilin concentration and/or binding of regulatory proteins.     

Extensive unfolding of the C-LytA choline-binding module by submicellar concentrations of sodium dodecyl sulphate

We have investigated the stability of the choline-binding module C-LytA against sodium dodecyl sulphate (SDS)-induced unfolding at pH 7.0 and 20 degrees C. A major intermediate with an unfolded N-terminal region accumulates at around 0.75 mM SDS, whereas 2.0 mM SDS was sufficient for a complete unfolding. This might be the first report of a protein being extensively unfolded by submicellar concentrations of SDS, occurring through formation of detergent clusters on the protein surface. All transitions were reversible upon SDS complexation with beta-cyclodextrin, allowing the calculation of thermodynamic parameters. A model for the unfolding of C-LytA by SDS is presented and compared to a previous denaturation scheme by guanidine hydrochloride.     

Irreversible thermoinactivation of glucoamylase from Aspergillus niger and thermostabilization by chemical modification of carboxyl groups

The incubation of glucoamylase from Aspergillus niger at 70 degrees C induced its rapid and irreversible inactivation. The covalent modifications of the protein structure involved in the thermoinactivation depended on the pH of the medium. We observed the formation of a low amount of disulfide-linked oligomers showing that disulfide exchange takes place at pH 5.5. Hydrolysis of peptide bonds at pH 3.5 and 4.5 was also detected. The chemical modification of carboxyl groups with a water-soluble carbodiimide, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) decreased the rate of appearance of low-molecular-weight peptides at pH 3.5 and 4.5 upon heating at 70 degrees C. However, the rate of inactivation at such pH values was not modified. Modification of carboxyl groups with EDC in the presence of ethylenediamine leading to the transformation of three carboxyl groups to amino groups increased the thermostability of the enzyme for temperatures above the temperature of compensation, Tc, which is 60 degrees C.     

Oxidation and reduction of pig skeletal muscle ryanodine receptors

Time-dependent effects of cysteine modification were compared in skeletal ryanodine receptors (RyRs) from normal pigs and RyR(MH) (Arg(615) to Cys(615)) from pigs susceptible to malignant hyperthermia, using the oxidizing reagents 4,4'-dithiodipyridine (4, 4'-DTDP) and 5,5'-dithio-bis(2-nitrobenzoic acid) (DTNB) or the reducing agent dithiothreitol (DTT). Normal and RyR(MH) channels responded similarly to all reagents. DTNB (1 mM), either cytoplasmic (cis) or luminal (trans), or 1 mM 4,4'-DTDP (cis) activated RyRs, introducing an additional long open time constant. 4,4'-DTDP (cis), but not DTNB, inhibited channels after >5 min. Activation and inhibition were relieved by DTT (1-10 mM). DTT (10 mM, cytoplasmic or luminal), without oxidants, activated RyRs, and activation reversed with 1 mM DTNB. Control RyR activity was maintained with 1 mM DTNB and 10 mM DTT present on the same or opposite sides of the bilayer. We suggest that 1) 4,4'-DTDP and DTNB covalently modify RyRs by oxidizing activating or inhibiting thiol groups; 2) a modified thiol depresses mammalian skeletal RyR activity under control conditions; 3) both the activating thiols and the modified thiols, accessible from either cytoplasm or lumen, reside in the transmembrane region; 4) some cardiac sulfhydryls are unavailable in skeletal RyRs; and 5) Cys(615) in RyR(MH) is functionally unimportant in redox cycling.     

Membrane-wall interrelationship in Gaffkya homari: sulfhydryl sensitivity and heat lability of nascent peptidoglycan incorporation into walls.

Membrane-walls from Gaffkya homari require a specific interrelationship between membrane and wall that functions in the incorporation of nascent peptidoglycan into the preexisting peptidoglycan of the wall. Two different methods were used to inhibit selectively this incorporation process: (i) sensitivity to sulfhydryl reagents and (ii) heat inactivation. Of the sulfhydryl reagents tested, 2.2 mM iodoacetamide inhibited the synthesis of wall peptidoglycan 50%, whereas greater than 100 mM was required to inhibit the synthesis of sodium dodecyl sulfate (SDS)-soluble peptidoglycan. Heat treatment at 37 degrees C (t 1/2 = 5.7 min) inhibited wall peptidoglycan synthesis without affecting SDS-soluble peptidoglycan synthesis. Inhibition of LD-carboxypeptidase by iodoacetamide and heat gave 50% inhibition and t 1/2 values similar to those observed for the incorporation process. Thus, it is suggested that the LD-carboxypeptidase may be one of the enzymes responsible for the sulfhydryl sensitivity and heat lability and that this enzyme may play a role in the relationship between membrane and wall in G. homari.     

Reactive sulfhydryl groups of coenzyme B12-dependent diol dehydrase: Differential modification of essential and nonessential ones

The apoenzyme of diol dehydrase was inactivated by four sulfhydryl-modifying reagents, p-chloromercuribenzoate, 5,5′-dithiobis(2-nitrobenzoate) (DTNB), iodoacetamide, and N-ethylmaleimide. In each case pseudo-first-order kinetics was observed. p-Chloromercuribenzoate modified two sulfhydryl groups per enzyme molecule and modification of the first one resulted in complete inactivation of the enzyme. DTNB also modified two sulfhydryl groups, but modification of the second one essentially corresponded to the inactivation. In both cases, the inactivation was reversed by incubation with dithiothreitol. Cyanocobalamin, a potent competitive inhibitor of adenosylcobalamin, protected the essential residue, but not the nonessential one, against the modification by these reagents. By resolving the sulfhydryl-modified cyanocobalamin-enzyme complex, the enzyme activity was recovered, irrespective of treatment with dithiothreitol. From these results, we can conclude that diol dehydrase has two reactive sulfhydryl groups, one of which is essential for catalytic activity and located at or in close proximity to the coenzyme binding site. The other is nonessential for activity. Neitherp-chloromercuribenzoate- nor DTNB-modified apoenzyme was able to bind cyanocobalamin, whereas the iodoacetamide- and N-ethylmaleimide-modified apoenzyme only partially lost the ability to bind cyanocobalamin. The inactivation of diol dehydrase by p-chloromercuribenzoate and DTNB did not bring about dissociation of the enzyme into subunits. Total number of the sulfhydryl groups of this enzyme was 14 when determined in the presence of 6 m guanidine hydrochloride. No disulfide bond was detected.     

The relationship between polymerization of complement component C9 and membrane channel formation.

C9 was studied with the objective to clarify the relationship between the process of C9 polymerization and membrane channel formation. Conditions that favor C9 polymerization include low ionic strength and calcium ion in the buffer. Moreover, polymerization is dependent on the concentration of C9. Calcium ion evokes about a threefold increase in the affinity constant for C9 self-association, and at 0 degrees C it imparts reversible amphiphilic properties in the molecule. These were discerned by measuring increases in the degree of reversible nonspecific binding of C9 to hydrophobic (tyramine-zymosan) and hydrophilic (arginyl-glutamyl-zymosan) supports as well as to erythrocytes. At 0 degrees C the hydrophilic-to-amphiphilic alteration of C9 is reversible, but upon incubation at 37 degrees C this transition is rendered permanent with the formation of poly(C9). A functional relationship between C9 polymerization and cytolysis was demonstrated by showing that polymerizing C9 can lyse reduced and alkylated erythrocytes. By studying comparative radiolabeling of tyrosine side chains within thrombin-nicked C9 and its polymerized form, it was demonstrated that upon polymerization the membrane-binding site of C9 becomes exposed. It is concluded that the process of circular polymerization of C9 causes a hydrophilic-to-amphiphilic transition that is required for membrane perforation and channel formation.     

Effect of protein disulfide isomerase on the regeneration of bovine ribonuclease A with dithiothreitol.

The role of protein disulfide isomerase (PDI) in the regeneration of ribonuclease A with dithiothreitol (DTT) was investigated at three different temperatures. The rates of formation of the native protein were markedly increased in the presence of PDI, 9-fold at 15 degrees C, 6-fold at 25 degrees C and 62-fold at 37 degrees C, respectively. In the presence of PDI, major changes were found in the distribution of intermediates in the three-disulfide region at 25 and 15 degrees C and also in the one-disulfide region at 15 degrees C, with the fast accumulation of the two native-like species des-[65-72] and des-[40-95]. The present results indicate that PDI does not alter the two major parallel pathways involving des-[65-72] and des-[40-95] in the regeneration of ribonuclease A with DTT.     

A posttranslational modification of beta-actin contributes to the slow dissociation of the spectrin-protein 4.1-actin complex of irreversibly sickled cells

Irreversibly sickled cells (ISCs) remain sickled even under conditions where they are well oxygenated and hemoglobin is depolymerized. In our studies we demonstrate that triton extracted ISC core skeletons containing only spectrin, protein 4.1, and actin also retain their sickled shape; while reversibly sickled cell (RSC) skeletons remodel to a round or biconcave shape. We also demonstrate that these triton extracted ISC core skeletons dissociate more slowly upon incubation at 37 degrees C than do RSC or control (AA) core skeletons. This observation may supply the basis for the inability of the ISC core skeleton to remodel its shape. Using an in vitro ternary complex dissociation assay, we demonstrate that a modification in beta-actin is the major determinant of the slow dissociation of the spectrin-protein 4.1-actin complex isolated from the ISC core skeleton. We demonstrate that the difference between ISC and control beta-actin is the inaccessibility of two cysteine residues in ISC beta-actin to labeling by thiol reactive reagents; due to the formation of a disulfide bridge between cysteine284 and cysteine373 in ISC beta-actin, or alternatively another modification of cysteine284 and cysteine373 which is reversible with DTT and adds less than 100 D to the molecular weight of beta-actin.     

Water transport in human red cells: effects of 'non-inhibitory' sulfhydryl reagents

The water diffusional permeability of human red blood cells following exposure to various sulfhydryl group (SH) reagents have been studied using a nuclear magnetic resonance technique. Exposure of red blood cells up to 12 mM N-ethylmaleimide (NEM) or 10 mM 5,5'-dithio-bis(2-nitrobenzoic acid) (DTNE) alone does not affect water diffusion. In contrast, when DTNB treatment follows a preincubation of the cells with NEM, a small (18% at 37 degrees C) but significant inhibition of water permeability occurs. The NEM and DTNB treatment of the cells caused no change of the cell shape and volume or of the cell water volume. Consequently, the inhibition observed after NEM and DTNB treatment has a real significance.     

Possible relationship between membrane proteins and phospholipid asymmetry in the human erythrocyte membrane.

After incubation of human erythrocytes at 37 degrees C in the absence of glucose (A) for 24 h, (B) for 4 h with 8 mM hexanol or (C) for 3 h with SH reagents, phosphatidylethanolamine becomes partly susceptible to hydrolysis by phospholipase A2 from Naja naja. The presence of glucose during the pretreatments suppresses this effect, except in the case of SH reagents that inhibit glycolysis. After incubation with tetrathionate, up to 45% of the phosphatidylethanolamine is degraded by the enzyme, an amount considerably in excess of the 20% attacked in fresh erythrocytes. Pancreatic phospholipase A2, an enzyme unable to hydrolyse the phospholipids of intact erythrocytes, partially degrades phosphatidylcholine and phosphatidylethanolamine of erythrocytes pretreated with hexanol or SH reagents. Reagents capable of oxidizing SH groups to disulfides (tetrathionate, o-iodosobenzoate and hydroquinone) even render susceptible to pancreatic phospholipase A2 phosphatidylserine, a phospholipid supposed to be entirely located in the inner lipid layer of the membrane. Alkylating or acylating SH reagents have no such effect. It is postulated that disulfide bond formation between membrane protein SH groups leads to an alteration in protein-phospholipid interactions and consequently induces a reorientation of phospholipids between the inner and the outer membrane lipid layer.     

Cyclic oxidation-reduction reactions regulate thromboxane A2/prostaglandin H2 receptor number and affinity in human platelet membranes

The radiolabeled thromboxane A2/prostaglandin H2 (TXA2/PGH2) agonist 125I-BOP bound to the TXA2/PGH2 receptor on human platelet membranes. Scatchard analysis showed that pretreatment of platelet membranes with the reducing agent dithiothreitol (DTT) (10 mM) for 10 min decreased maximal 125I-BOP binding (Bmax) from 1.51 +/- 0.11 pmol/mg to 0.51 +/- 0.05 pmol/mg (p = 0.001) and increased the affinity of the remaining binding sites (Kd = 647 +/- 64 pM (untreated), 363 +/- 46 pM (treated), p = 0.006). Prolonged incubation of membranes with DTT (10 mM) for 40 min further reduced the Bmax to 0.23 +/- 0.08 pmol/mg (p = 0.001 from untreated), and the binding affinity remained elevated (Kd = 334 +/- 117 pM, p = 0.035 from untreated). Kinetic analysis of 125I-BOP binding indicated that the apparent increase in binding affinity after DTT treatment was due exclusively to an increase in the rate of ligand-receptor association with no change in dissociation rate. The effects of DTT on 125I-BOP binding were dose-dependent with an EC50 of 8.1 +/- 0.2 mM. DTT inactivation of TXA2/PGH2 receptors was time-dependent with a second order rate constant (k2) of 0.123 M-1 s-1 at 20 degrees C. The platelet membrane 125I-BOP binding site was partially protected from DTT inactivation by prior occupation with the ligand. TXA2/PGH2 receptor protection by I-BOP was dose-dependent and linearly related (r = 0.97, p = 0.002) to the proportion of receptors occupied, but was incomplete since agonist occupation of 89% of the total number of receptors resulted in only a 38% protective effect. Inhibition of 125I-BOP binding after reduction with DTT could be made permanent by addition of the sulfhydryl alkylating agent N-ethylmaleimide (25 mM), but was completely reversed by reoxidation with dithionitrobenzoic acid (DTNB) (5 mM). Oxidation of untreated receptors with DTNB resulted in a 64% increase in 125I-BOP binding sites from 1.65 +/- 0.12 pmol/mg to 2.70 +/- 0.08 pmol/mg (p = 0.013) without affecting binding affinity. DTNB-induced increases in 125I-BOP binding were concentration-dependent with an EC50 of 668 +/- 106 microM and occurred in less than 1 min at 37 degrees C. In the absence of DTT, alkylation of free sulfhydryl groups with N-ethylmaleimide reduced 125I-BOP Bmax in platelet membranes to 0.85 +/- 0.08 pmol/mg (p = 0.003), but did not change the affinity of the remaining receptors. The EC50 for N-ethylmaleimide inactivation of TXA2/PGH2 receptors was 139 +/- 8 mM, and the k2 in time course experiments was 0.067 M-1 s-1 at 20 degrees C.(ABSTRACT TRUNCATED AT 400 WORDS)     

Disulfide-linked integrase oligomers involving C280 residues are formed in vitro and in vivo but are not essential for human immunodeficiency virus replication

The human immunodeficiency virus type 1 integrase (IN) forms an oligomer that integrates both ends of the viral DNA. The nature of the active oligomer is unclear. Recombinant IN obtained under reducing conditions is always in the form of noncovalent oligomers. However, disulfide-linked oligomers of IN were recently observed within viral particles. We show that IN produced from a baculovirus expression system can form disulfide-linked oligomers. We investigated which residues are responsible for the disulfide bridges and the relationship between the ability to form covalent dimers and IN activity. Only the mutation of residue C280 was sufficient to prevent the formation of intermolecular disulfide bridges in oligomers of recombinant IN. IN activity was studied under and versus nonreducing conditions: the formation of disulfide bridges was not required for the in vitro activities of the enzyme. Moreover, the covalent dimer does not dissociate into individual protomers on disulfide bridge reduction. Instead, IN undergoes a spontaneous multimerization process that yields a homogenous noncovalent tetramer. The C280S mutation also completely abolished the formation of disulfide bonds in the context of the viral particle. Finally, the replication of the mutant virus was investigated in replicating and arrested cells. The infectivity of the virus was not affected by the C280S IN mutation in either dividing or nondividing cells. The disulfide-linked form of the IN oligomers observed in the viral particles is thus not required for viral replication.     

Secondary structural changes of non-reduced and reduced ribonuclease A in solutions of urea, guanidine hydrochloride and sodium dodecyl sulfate

The secondary structures of ribonuclease A (RNAase A) before and after reduction of the disulfide bridges and blockage of the thiol groups with iodoacetamide were examined in solutions of urea, guanidine hydrochloride, and sodium dodecyl sulfate (SDS). The relative proportions of alpha-helix, beta-structure, and disordered structure were estimated by the curve-fitting method of circular dichroism (Chen, Y.H., Yang, J.T. and Chau, K.H. (1974) Biochemistry 13, 3350-3359). The native RNAase A, with the disulfide bridges intact, contained 19% helix and 38% beta-structure. Reduction of its disulfide bridges led to a decrease in the proportion of these structures to 9% for the alpha-helix and 17% for the beta-structure. The non-reduced RNAase A resisted unfolding in low concentrations of urea and guanidine hydrochloride. The beta-structure which remained after reduction appeared to be stable even in solutions of 6 M guanidine and 9 M urea. A considerable amount of the beta-structure in both the non-reduced and the reduced RNAase A remained unaffected by high concentrations of SDS.     

Solution studies of the quaternary structure and assembly of human von Willebrand factor

The reversible association of protomers of von Willebrand protein (vWF) was studied in order to analyze the forces and mechanism of vWF polymer assembly. At concentrations of vWF found in plasma (approximately 16 micrograms/mL), disulfide bond reduction with 50 mM 2-mercaptoethanol (2-ME) markedly reduced both vWF activity, as measured by ristocetin-dependent platelet agglutination, and average polymer size (Rh, the mean hydrodynamic radius) in solution, as determined by quasi-elastic light scattering (QLS) and by gel filtration chromatography. With increasing vWF concentration, activity and Rh increased despite reduction of interprotomer disulfide bonds. Changes in temperature after 2-ME treatment produced reversible changes in activity and Rh. Varying the total vWF concentration at any given temperature after 2-ME treatment changed Rh in a consistent and predictable fashion, so that estimates of the dissociation constant for vWF protomer-polymer equilibrium were obtained: Kd5 degrees C = 0.77 micrograms/mL, Kd25 degrees C = 2.4 micrograms/mL, and Kd37 degrees C = 7.7 micrograms/mL, where under the conditions of reduction presented here, the basic protomer of vWF is a dimer. Increasing ionic strength after 2-ME treatment with 1 M KCl did not change Rh, while approximately 100 microM sodium dodecyl sulfate (SDS) or approximately 300 microM sodium deoxycholate (DOC) reduced both Rh and activity compared with those of unreduced polymer. These data show that disulfide bonds are necessary to maintain vWF polymer size and activity at plasma concentrations but that noncovalent forces of association can maintain vWF polymer size and activity at higher concentrations. These forces of association may be important for polymer assembly during intracellular synthesis of vWF.     

Expression, purification, renaturation and activation of fish myostatin expressed in Escherichia coli: facilitation of refolding and activity inhibition by myostatin prodomain

Myostatin (growth and differentiation factor-8) is a member of the transforming growth factor-beta superfamily, is expressed mainly in skeletal muscle and acts as a negative growth regulator. Mature myostatin (C-terminal) is a homodimer that is cleaved post-translationally from the precursor myostatin, also yielding the N-terminal prodomain. We expressed in Escherichia coli three forms of fish myostatin: precursor, prodomain and mature. The three forms were over-expressed as inclusion bodies. Highly purified inclusion bodies were solubilized in a solution containing guanidine hydrochloride and the reducing agent DTT. Refolding (indicated by a dimer formation) of precursor myostatin, mature myostatin or a mixture of prodomain and mature myostatin was compared under identical refolding conditions, performed in a solution containing sodium chloride, arginine, a low concentration of guanidine hydrochloride and reduced and oxidized glutathione at 4 degrees C for 14 days. While precursor myostatin formed a reversible disulfide bond with no apparent precipitation, mature myostatin precipitated in the same refolding solution, unless CHAPS was included, and only a small proportion formed a disulfide bond. The trans presence of the prodomain in the refolding solution prevented precipitation of mature myostatin but did not promote formation of a dimer. Proteolytic cleavage of purified, refolded precursor myostatin with furin yielded a monomeric prodomain and a disulfide-linked, homodimeric mature myostatin, which remained as a latent complex. Activation of the latent complex was achieved by acidic or thermal treatments. These results demonstrate that the cis presence of the prodomain is essential for the proper refolding of fish myostatin and that the cleaved mature dimer exists as a latent form.     

Detection of reversible protein thiol modifications in tissues

Oxidation/reduction reactions of protein thiol groups (PSH) have been implicated in many physiological and pathological processes. Although many new techniques for separation and identification of modified cysteinyl residues in proteins have been developed, critical assessment of reagents and sample processing often are overlooked. We carefully compared the effectiveness of N-ethylmaleimide (NEM), iodoacetamide (IAM), and iodoacetic acid (IAA) in alkylating protein thiols and found that NEM required less reagent (125 vs. 1000 mol:mol excess), required less time (4 min vs. 4h), and was more effective at lower pHs (4.3 vs. 8.0) in comparison with IAM and IAA. The relative efficacy of dithiothreitol (DTT) and tris(2-carboxyethyl)phosphine (TCEP) for reducing protein disulfides suspended in NaPO(4) buffer or MeOH was assessed, and no differences in total normalized fluorescence were detected at the concentrations tested (10-100mM); however, individual band resolution appeared better in samples reduced with DTT in MeOH. In addition, we found that oxidation ex vivo was minimized in tissue samples that were homogenized in aqueous buffers containing excess molar quantities of NEM compared with samples homogenized in MeOH containing NEM. Using NEM for thiol alkylation, DTT for disulfide reduction, and mBBr for labeling the reduced disulfide and fluorimetric detection, we were able to generate an in-gel standard curve and quantitate total disulfide contents within biological samples as well as to identify changes in specific protein bands by scanning densitometry. We demonstrated that reagents and techniques we have identified for disulfide detection in complex samples are also applicable to two-dimensional electrophoresis separations.