Stereospecific alkylation of cis-3-chloroacrylic acid dehalogenase by (R)-oxirane-2-carboxylate: analysis and mechanistic implications

The enzymes trans-3-chloroacrylic acid dehalogenase (CaaD) and cis-3-chloroacrylic acid dehalogenase (cis-CaaD) represent the two major classes of bacterial, isomer-selective 3-chloroacrylic acid dehalogenases. They catalyze the hydrolytic dehalogenation of either trans- or cis-3-haloacrylates to yield malonate semialdehyde, presumably through unstable halohydrin intermediates. In view of a proposed general acid/base mechanism for these enzymes, (R)- and (S)-oxirane-2-carboxylate were investigated as potential irreversible inhibitors. Only cis-CaaD is irreversibly inhibited in a time- and concentration-dependent manner and only by the (R)-enantiomer of oxirane-2-carboxylate. The enzyme displays saturation kinetics and is protected from inactivation by the presence of substrate. These findings indicate that the inactivation process involves the initial formation of a reversibly bound enzyme-inhibitor complex at the active site followed by covalent modification. Mass spectral analysis of the inactivated cis-CaaD shows that Pro-1 is the site of modification. It has also been determined that Arg-70 and Arg-73 are required for covalent modification because incubation of either the R70A or R73A mutant with inhibitor does not result in enzyme alkylation. Studies of the pH dependence of the kinetic parameters of wild-type cis-CaaD reveal that a protonated group with a pK(a) of approximately 9.3 is essential for catalysis. The group is likely Pro-1, making it predominately a charged species under the conditions of the inactivation experiments. Two mechanisms could account for these observations. In one mechanism, the oxirane undergoes acid-catalyzed ring opening followed by alkylation of the conjugate base of Pro-1. Alternatively, the oxirane undergoes a nucleophilic substitution reaction where the conjugate base of Pro-1 functions as the nucleophile and an acid catalyst polarizes the carbon oxygen bond. The two arginine residues likely bind the carboxylate group and position the inhibitor in a favorable orientation for the alkylation reaction. These findings set the stage for a crystallographic analysis of the inactived enzyme to delineate further the roles of active site residues in both the inactivation process and the catalytic mechanism.     

Characterization of Cg10062 from Corynebacterium glutamicum: implications for the evolution of cis-3-chloroacrylic acid dehalogenase activity in the tautomerase superfamily

A 149-amino acid protein designated Cg10062 is encoded by a gene from Corynebacterium glutamicum. The physiological function of Cg10062 is unknown, and the gene encoding this protein has no obvious genomic context. Sequence analysis links Cg10062 to the cis-3-chloroacrylic acid dehalogenase ( cis-CaaD) family, one of the five known families of the tautomerase superfamily. The characterized tautomerase superfamily members have two distinctive characteristics: a beta-alpha-beta structure motif and a catalytic amino-terminal proline. Pro-1 is present in the Cg10062 amino acid sequence along with His-28, Arg-70, Arg-73, Tyr-103, and Glu-114, all of which have been implicated as critical residues for cis-CaaD activity. The gene for Cg10062 has been cloned and the protein overproduced, purified, and subjected to kinetic and mechanistic characterization. Like cis-CaaD, Cg10062 functions as a hydratase: it converts 2-oxo-3-pentynoate to acetopyruvate and processes 3-bromopropiolate to a species that inactivates the enzyme by acylation of Pro-1. Kinetic and (1)H NMR spectroscopic studies also show that Cg10062 processes both isomers of 3-chloroacrylic acid at low levels with a clear preference for the cis isomer. Pro-1 is critical for the dehalogenase and hydratase activities because the P1A mutant no longer catalyzes either reaction. The presence of the six key catalytic residues and the hydratase activity coupled with the absence of an efficient cis-CaaD activity and the lack of isomer specificity implicate factors beyond this core set of residues in cis-CaaD catalysis and specificity. This work sets the stage for in-depth mechanistic and structural studies of Cg10062, which could identify the additional features necessary for a fully active and highly specific cis-CaaD. Such results will also shed light on how cis-CaaD emerged in the tautomerase superfamily because Cg10062 could be characteristic of an intermediate along the evolutionary pathway for this dehalogenase.     

Crystal structures of native and inactivated cis-3-chloroacrylic acid dehalogenase. Structural basis for substrate specificity and inactivation by (R)-oxirane-2-carboxylate

The bacterial degradation pathways for the nematocide 1,3-dichloropropene rely on hydrolytic dehalogenation reactions catalyzed by cis- and trans-3-chloroacrylic acid dehalogenases (cis-CaaD and CaaD, respectively). X-ray crystal structures of native cis-CaaD and cis-CaaD inactivated by (R)-oxirane-2-carboxylate were elucidated. They locate four known catalytic residues (Pro-1, Arg-70, Arg-73, and Glu-114) and two previously unknown, potential catalytic residues (His-28 and Tyr-103'). The Y103F and H28A mutants of these latter two residues displayed reductions in cis-CaaD activity confirming their importance in catalysis. The structure of the inactivated enzyme shows covalent modification of the Pro-1 nitrogen atom by (R)-2-hydroxypropanoate at the C3 position. The interactions in the complex implicate Arg-70 or a water molecule bound to Arg-70 as the proton donor for the epoxide ring-opening reaction and Arg-73 and His-28 as primary binding contacts for the carboxylate group. This proposed binding mode places the (R)-enantiomer, but not the (S)-enantiomer, in position to covalently modify Pro-1. The absence of His-28 (or an equivalent) in CaaD could account for the fact that CaaD is not inactivated by either enantiomer. The cis-CaaD structures support a mechanism in which Glu-114 and Tyr-103' activate a water molecule for addition to C3 of the substrate and His-28, Arg-70, and Arg-73 interact with the C1 carboxylate group to assist in substrate binding and polarization. Pro-1 provides a proton at C2. The involvement of His-28 and Tyr-103' distinguishes the cis-CaaD mechanism from the otherwise parallel CaaD mechanism. The two mechanisms probably evolved independently as the result of an early gene duplication of a common ancestor.     

Cloning, expression, and characterization of a cis-3-chloroacrylic acid dehalogenase: insights into the mechanistic, structural, and evolutionary relationship between isomer-specific 3-chloroacrylic acid dehalogenases

The gene encoding the cis-3-chloroacrylic acid dehalogenase (cis-CaaD) from coryneform bacterium strain FG41 has been cloned and overexpressed, and the enzyme has been purified to homogeneity and subjected to kinetic and mechanistic characterization. Kinetic studies show that cis-CaaD processes cis-3-haloacrylates, but not trans-3-haloacrylates, with a turnover number of approximately 10 s(-1). The product of the reaction is malonate semialdehyde, which was confirmed by its characteristic 1H NMR spectrum. The enzyme shares low but significant sequence similarity with the previously studied trans-3-chloroacrylic acid dehalogenase (CaaD) and with other members of the 4-oxalocrotonate tautomerase (4-OT) family. While 4-OT and CaaD function as homo- and heterohexamers, respectively, cis-CaaD appears to be a homotrimeric protein as assessed by gel filtration chromatography. On the basis of the known three-dimensional structures and reaction mechanisms of CaaD and 4-OT, a sequence alignment implicated Pro-1, Arg-70, Arg-73, and Glu-114 as important active-site residues in cis-CaaD. Subsequent site-directed mutagenesis experiments confirmed these predictions. The acetylene compounds, 2-oxo-3-pentynoate and 3-bromo- and 3-chloropropiolate, were processed by cis-CaaD to products consistent with an enzyme-catalyzed hydration reaction previously established for CaaD. Hydration of 2-oxo-3-pentynoate afforded acetopyruvate, while the 3-halopropiolates became irreversible inhibitors that modified Pro-1. The results of this work revealed that cis-CaaD and CaaD have different primary and quaternary structures, and display different substrate specificity and catalytic efficiencies, but likely share a highly conserved catalytic mechanism. The mechanism may have evolved independently because sequence analysis indicates that cis-CaaD is not a 4-OT family member, but represents the first characterized member of a new family in the tautomerase superfamily that probably resulted from an independent duplication of a 4-OT-like sequence. The discovery of a fifth family of enzymes within this superfamily further demonstrates the diversity of activities and structures that can be created from 4-OT-like sequences.     

Characterization of a newly identified mycobacterial tautomerase with promiscuous dehalogenase and hydratase activities reveals a functional link to a recently diverged cis-3-chloroacrylic acid dehalogenase

The enzyme cis-3-chloroacrylic acid dehalogenase (cis-CaaD) is found in a bacterial pathway that degrades a synthetic nematocide, cis-1,3-dichloropropene, introduced in the 20th century. The previously determined crystal structure of cis-CaaD and its promiscuous phenylpyruvate tautomerase (PPT) activity link this dehalogenase to the tautomerase superfamily, a group of homologous proteins that are characterized by a catalytic amino-terminal proline and a β-α-β structural fold. The low-level PPT activity of cis-CaaD, which may be a vestige of the function of its progenitor, prompted us to search the databases for a homologue of cis-CaaD that was annotated as a putative tautomerase and test both its PPT and cis-CaaD activity. We identified a mycobacterial cis-CaaD homologue (designated MsCCH2) that shares key sequence and active site features with cis-CaaD. Kinetic and 1H NMR spectroscopic studies show that MsCCH2 functions as an efficient PPT and exhibits low-level promiscuous dehalogenase activity, processing both cis- and trans-3-chloroacrylic acid. To further probe the active site of MsCCH2, the enzyme was incubated with 2-oxo-3-pentynoate (2-OP). At pH 8.5, MsCCH2 is inactivated by 2-OP due to the covalent modification of Pro-1, suggesting that Pro-1 functions as a nucleophile at pH 8.5 and attacks 2-OP in a Michael-type reaction. At pH 6.5, however, MsCCH2 exhibits hydratase activity and converts 2-OP to acetopyruvate, which implies that Pro-1 is cationic at pH 6.5 and not functioning as a nucleophile. At pH 7.5, the hydratase and inactivation reactions occur simultaneously. From these results, it can be inferred that Pro-1 of MsCCH2 has a pKa value that lies in between that of a typical tautomerase (pKa of Pro-1～6) and that of cis-CaaD (pKa of Pro-1～9). The shared activities and structural features, coupled with the intermediate pKa of Pro-1, suggest that MsCCH2 could be characteristic of an evolutionary intermediate along the past route for the divergence of cis-CaaD from an unknown superfamily tautomerase. This makes MsCCH2 an ideal candidate for laboratory evolution of its promiscuous dehalogenase activity, which could identify additional features necessary for a fully active cis-CaaD. Such results will provide insight into pathways that could lead to the rapid divergent evolution of an efficient cis-CaaD enzyme.     

Synthesis of enantiomerically pure trans-(1R,2R)- and cis-(1S,2R)-1-amino-2-indanol by lipase and omega-transaminase

Syntheses of trans-(1R,2R) and cis-(1S,2R)-1-amino-2-indanol (AI) were accomplished by a series of enantioselective enzymatic reactions using lipase and transaminase (TA). Lipase catalysed enantioselective hydrolysis of 2-acetoxyindanone was employed to prepare (R)-2-hydroxy indanone (HI). trans-AI (5 mM) (de > 98%) was produced from 20 mM (R)-2- HI using omega-TA and 50 mM (S)-1-aminoindan as an amino donor in water-saturated ethyl acetate. For the production of cis-AI, the diastereomeric (2R)-AI was synthesized from (R)-2-HI using reductive amination, and the kinetic resolution was performed with omega-TA. The enantioselectivity of omega-TA for (2R)-AI was increased to 22.1 in the presence of 5% gamma-cyclodextrin. cis-AI (15.4 mM) (96% de) was obtained from 40 mM (2R)-AI using 30 mM pyruvate and omega-TA (25 mg) in 10 mL of 100 mM phosphate buffer (pH 7.0).     

Primary deuterium isotope effects for the 3-methylaspartase-catalyzed deamination of (2S)-aspartic acid, (2S,3S)-3-methylaspartic acid, and (2S,3S)-3-ethylaspartic acid

3-Methylaspartate ammonia-lyase catalyzes the deamination of (2S)-aspartic acid 137 times more slowly than the deamination of (2S,3S)-3-methylaspartic acid but catalyzes the amination of fumaric acid 1.8 times faster than the amination of mesaconic acid [Botting, N.P., Akhtar, M., Cohen, M. A., & Gani, D. (1988) Biochemistry (preceding paper in this issue)]. In order to understand the mechanistic basis for these observations, the deamination reaction was examined kinetically with (2S)-aspartic acid, (2S,3S)-3-methylaspartic acid, (2S,3S)-3-ethylaspartic acid, and the corresponding C-3-deuteriated isotopomers. Comparison of the double-reciprocal plots of the initial reaction velocities for each of the three pairs of substrates revealed that the magnitude of the primary isotope effect on both Vmax and V/K varied with the substituent at C-3 of the substrate. 3-Methylaspartic acid showed the largest isotope effect (1.7 on Vmax and V/K), 3-ethylaspartic acid showed a smaller isotope effect (1.2 on Vmax and V/K), and aspartic acid showed no primary isotope effect at all. These results, which are inconsistent with earlier reports that there is no primary isotope effect for 3-methylaspartic acid [Bright, H. J. (1964) J. Biol. Chem. 239, 2307], suggest that for both 3-methylaspartic acid and 3-ethylaspartic acid elimination occurs via a predominantly concerted mechanism whereas for aspartic acid an E1cb mechanism prevails.(ABSTRACT TRUNCATED AT 250 WORDS)     

A straightforward stereoselective synthesis of meso-, (S,S)- and (R,R)-2,6-diaminopimelic acids from cis-1,4-diacetoxycyclohept-2-ene

A straightforward synthesis of meso-2,6-diaminopimelic acid (DAP) meso-1 was developed from 1,4-diacetoxycyclohept-2-ene (2) via an oxidative ring cleavage. Subsequently, an enantio-divergent synthesis of (S,S)- and (R,R)-1 was performed using a homochiral monoacetate 7 available from 2 by enzymatic desymmetrization.     

Syntheses of 2-Deoxy-2-[(2R,3S)-2-fluoro-3-hydroxytetradecanamido]-3-O-[(3R)-3-hydroxytetradecanoyl]-4-O-phosphono-D-glucopyranose and Its (2S,3R)-Isomer

2-Deoxy-2-[(2R,3S)-2-fluoro-3-hydroxytetradecanamido]-3-O-[(3R)-3-hydroxytetradecanoyl]-4-O-phosphono-D-glucopyranose and its (2S,3R)-isomer were respectively synthesized from allyl 2-[(2R,3S)-3-(benzyloxycarbonyloxy)-2-fluorotetradecanamido]-2-deoxy-4,6-O-isopropylidene-β-D-glucopyranoside and its corresponding (2S,3R)-isomer. Both target compounds did not activate macrophage, but the (2S,3R)-analogue strongly inhibited the binding of LPS to macrophage.     

(2R,3S)-(+)- and (2S,3R)-(-)-Halofuginone lactate: synthesis, absolute configuration, and activity against Cryptosporidium parvum

The trans-enantiomers of the commercially important anti-protozoal compound Halofuginone have been prepared and characterized, and the absolute configuration was assigned by X-ray crystallography. The activity of both enantiomers against Cryptosporidium parvum was determined in vitro and related to acute toxicity in vivo. It was shown that both the activity and the toxicity are properties of the (2R,3S)-enantiomer. We conclude that with respect to broadening the therapeutic window there is no advantage in application of one enantiomer over the application of the racemic mixture in the treatment of C. parvum infections.     

The roles of active-site residues in the catalytic mechanism of trans-3-chloroacrylic acid dehalogenase: a kinetic, NMR, and mutational analysis

trans-3-Chloroacrylic acid dehalogenase (CaaD) converts trans-3-chloroacrylic acid to malonate semialdehyde by the addition of H(2)O to the C-2, C-3 double bond, followed by the loss of HCl from the C-3 position. Sequence similarity between CaaD, an (alphabeta)(3) heterohexamer (molecular weight 47,547), and 4-oxalocrotonate tautomerase (4-OT), an (alpha)(6) homohexamer, distinguishes CaaD from those hydrolytic dehalogenases that form alkyl-enzyme intermediates. The recently solved X-ray structure of CaaD demonstrates that betaPro-1 (i.e., Pro-1 of the beta subunit), alphaArg-8, alphaArg-11, and alphaGlu-52 are at or near the active site, and the >or=10(3.4)-fold decreases in k(cat) on mutating these residues implicate them as mechanistically important. The effect of pH on k(cat)/K(m) indicates a catalytic base with a pK(a) of 7.6 and an acid with a pK(a) of 9.2. NMR titration of (15)N-labeled wild-type CaaD yielded pK(a) values of 9.3 and 11.1 for the N-terminal prolines, while the fully active but unstable alphaP1A mutant showed a pK(a) of 9.7 (for the betaPro-1), implicating betaPro-1 as the acid catalyst, which may protonate C-2 of the substrate. These results provide the first evidence for an amino-terminal proline, conserved in all known tautomerase superfamily members, functioning as a general acid, rather than as a general base as in 4-OT. Hence, a reasonable candidate for the general base in CaaD is the active site residue alphaGlu-52. CaaD has 10 arginine residues, six in the alpha-subunit (Arg-8, Arg-11, Arg-17, Arg-25, Arg-35, and Arg-43), and four in the beta-subunit (Arg-15, Arg-21, Arg-55, and Arg-65). (1)H-(15)N-heteronuclear single quantum coherence (HSQC) spectra of CaaD showed seven to nine Arg-NepsilonH resonances (denoted R(A) to R(I)) depending on the protein concentration and pH. One of these signals (R(D)) disappeared in the spectrum of the largely inactive alphaR11A mutant (deltaH = 7.11 ppm, deltaN = 89.5 ppm), and another one (R(G)) disappeared in the spectrum of the inactive alphaR8A mutant (deltaH = 7.48 ppm, deltaN = 89.6 ppm), thereby assigning these resonances to alphaArg-11NepsilonH, and alphaArg-8NepsilonH, respectively. (1)H-(15)N-HSQC titration of the enzyme with the substrate analogue 3-chloro-2-butenoic acid (3-CBA), a competitive inhibitor (K(I)(slope) = 0.35 +/- 0.06 mM), resulted in progressive downfield shifts of the alphaArg-8Nepsilon resonance yielding a K(D) = 0.77 +/- 0.44 mM, comparable to the (K(I)(slope), suggestive of active site binding. Increasing the pH of free CaaD to 8.9 at 5 degrees C resulted in the disappearance of all nine Arg-NepsilonH resonances due to base-catalyzed NepsilonH exchange. Saturating the enzyme with 3-CBA (16 mM) induced the reappearance of two NepsilonH signals, those of alphaArg-8 and alphaArg-11, indicating that the binding of the substrate analogue 3-CBA selectively slows the NepsilonH exchange rates of these two arginine residues. The kinetic and NMR data thus indicate that betaPro-1 is the acid catalyst, alphaGlu-52 is a reasonable candidate for the general base, and alphaArg-8 and alphaArg-11 participate in substrate binding and in stabilizing the aci-carboxylate intermediate in a Michael addition mechanism.     

Synthesis of cis-lactone lignan, cis-(2S,3R)-parabenzlactone, from L-arabinose

As a model synthesis on cis-2,3-dibenzyl-4-butanolide lignan, cis-(2S,3R)-parabenzlactone bearing a chiral benzyl alcohol moiety was stereoselectively synthesized from L-arabinose.     

Incorporation of (2S,3S) and (2S,3R) beta-methyl aspartic acid into RGD-containing peptides

We report the synthesis and biological activity of a series of side-chain-constrained RGD peptides containing the (2S,3R) or (2S,3S) beta-methyl aspartic acid within the RGD sequence. These compounds have been assayed for binding to the integrin receptors alpha(IIb)beta3 and alpha(v)beta3 and the results demonstrate the importance of the side-chain orientation of this particular residue within the RGD sequence. Based on our findings, the (2S,3S) beta-methylated analogues of our RGD sequences maintain their binding potency to the integrin receptors while the (2S,3R) beta-methylated analogues exhibit a drastically reduced binding affinity. Our studies demonstrate that the three-dimensional orientation of the aspartyl side chain is a very important parameter for integrin binding and that small changes that affect the side-chain orientations give rise to drastic changes in binding affinity. These results provide important information for the design of more potent RGD mimetics.     

Practical access to the proline analogs (S,S,S)- and (R,R,R)-2-methyloctahydroindole-2-carboxylic acids by HPLC enantioseparation

An efficient methodology for the preparation of the α‐tetrasubstituted proline analog (S,S,S)‐2‐methyloctahydroindole‐2‐carboxylic acid, (S,S,S)‐(αMe)Oic, and its enantiomer, (R,R,R)‐(αMe)Oic, has been developed. Starting from easily available substrates and through simple transformations, a racemic precursor has been synthesized in excellent yield and further subjected to HPLC resolution using a cellulose‐derived chiral stationary phase. Specifically, a semipreparative (250 mm × 20 mm ID) Chiralpak® IC column has allowed the efficient resolution of more than 4 g of racemate using a mixture of n‐hexane/tert‐butyl methyl ether/2‐propanol as the eluent. Multigram quantities of the target amino acids have been isolated in enantiomerically pure form and suitably protected for incorporation into peptides. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Production of (R)-3-amino-3-phenylpropionic acid and (S)-3-amino-3-phenylpropionic acid from (R,S)-N-acetyl-3-amino-3-phenylpropionic acid using microorganisms having enantiomer-specific amidohydrolyzing activity

(R)-3-Amino-3-phenylpropionic acid ((R)-beta-Phe) and (S)-3-amino-3-phenylpropionic acid ((S)-beta-Phe) are key compounds on account of their use as intermediates in synthesizing pharmaceuticals. Enantiomerically pure non-natural amino acids are generally prepared by enzymatic resolution of the racemic N-acetyl form, but despite the intense efforts this method could not be used for preparing enantiomerically pure beta-Phe, because the effective enzyme had not been found. Therefore, screening for microorganisms capable of amidohydrolyzing (R,S)-N-acetyl-3-amino-3-phenylpropionic acid ((R,S)-N-Ac-beta-Phe) in an enantiomer-specific manner was performed. A microorganism having (R)-enantiomer-specific amidohydrolyzing activity and another having both (R)-enantiomer- and (S)-enantiomer-specific amidohydrolyzing activities were obtained from soil samples. Using 16S rDNA analysis, the former organism was identified as Variovorax sp., and the latter as Burkholderia sp. Using these organisms, enantiomerically pure (R)-beta-Phe (>99.5% ee) and (S)-beta-Phe (>99.5% ee) with a high molar conversion yield (67%-96%) were obtained from the racemic substrate.     

Structures and Properties of a Diastereoisomeric Molecular Compound of (2S,3S)- and (2R,3S)-N-Acetyl-2-amino-3-methylpentanoic Acids

An X-ray crystal structural analysis revealed that (2S,3S)-N-acetyl-2-amino-3-methylpentanoic acid (N-acetyl-L-isoleucine; Ac-L-Ile) and (2R,3S)-N-acetyl-2-amino-3-methylpentanoic acid (N-acetyl-D-alloisoleucine; Ac-D-aIle) formed a molecular compound containing one Ac-L-Ile molecule and one Ac-D-aIle molecule as an unsymmetrical unit. This molecular compound is packed with strong hydrogen bonds forming homogeneous chains consisting of Ac-L-Ile molecules or Ac-D-aIle molecules and weak hydrogen bonds connecting these homogeneous chains in a fashion similar to that observed for Ac-L-Ile and Ac-D-aIle. Recrystallization of an approximately 1:1 mixture of Ac-L-Ile and Ac-D-aIle from water gave an equimolar molecular compound due to its lower solubility than that of Ac-D-aIle or especially Ac-L-Ile. The results suggest that the equimolar mixture of Ac-L-Ile and Ac-D-aIle could be obtained from an Ac-L-Ile-excess mixture by recystallization from water.     

Enantioselective synthesis of (2R, 3S)- and (2S, 3R)-4,4,4-trifluoro-N-Fmoc-O-tert-butyl-threonine and their racemization-free incorporation into oligopeptides via solid-phase synthesis

An efficient method for the enantioselective synthesis of (2R, 3S)- and (2S, 3R)-4,4,4-trifluoro-N-Fmoc-O-tert-butyl-threonine on multigram scales was developed. Absolute configurations of the two stereoisomers were ascertained by X-ray crystallography. Racemization-free coupling conditions for the incorporation of tfT into oligopeptides were then explored. For solution-phase synthesis, tfT racemization was not an issue under conventional coupling conditions. For solid-phase synthesis, the following conditions were identified to achieve racemization-free synthesis: if tfT (3.0 equiv) was not the first amino acid to be linked to the resin (1.0 equiv), the condition is 2.7 equiv DIC/3.0 equiv HOBt as the coupling reagent at 0 degrees C for 20 h; if tfT (3.0 equiv) was the first amino acid to be linked to the resin (1.0 equiv), then 1.0 equiv of CuCl(2) needs to be added to the coupling reagent.     

Construction of a Corynebacterium glutamicum platform strain for the production of stilbenes and (2S)-flavanones

Corynebacterium glutamicum is an important organism in industrial biotechnology for the microbial production of bulk chemicals, in particular amino acids. However, until now activity of a complex catabolic network for the degradation of aromatic compounds averted application of C. glutamicum as production host for aromatic compounds of pharmaceutical or biotechnological interest. In the course of the construction of a suitable C. glutamicum platform strain for plant polyphenol production, four gene clusters comprising 21 genes involved in the catabolism of aromatic compounds were deleted. Expression of plant-derived and codon-optimized genes coding for a chalcone synthase (CHS) and a chalcone isomerase (CHI) in this strain background enabled formation of 35 mg/L naringenin and 37 mg/L eriodictyol from the supplemented phenylpropanoids p-coumaric acid and caffeic acid, respectively. Furthermore, expression of genes coding for a 4-coumarate: CoA-ligase (4CL) and a stilbene synthase (STS) led to the production of the stilbenes pinosylvin, resveratrol and piceatannol starting from supplemented phenylpropanoids cinnamic acid, p-coumaric acid and caffeic acid, respectively. Stilbene concentrations of up to 158 mg/L could be achieved. Additional engineering of the amino acid metabolism for an optimal connection to the synthetic plant polyphenol pathways enabled resveratrol production directly from glucose. The construction of these C. glutamicum platform strains for the synthesis of plant polyphenols opens the door towards the microbial production of high-value aromatic compounds from cheap carbon sources with this microorganism.     

Synthesis of (3R,10R)- and (3S,10S)-Diastereomers of 3,10-Dimethylspermine

Russian Journal of Bioorganic Chemistry - A simple and practical 10-step synthesis is reported for previously unknown diastereomers of C?methylated spermine (Spm) analogue,...     

Synthesis of (+)-(2R,3S,4R)-2,3,4-trihydroxycyclohexanone from D-glucose

We have described the synthesis of (+)-(2R,3S,4R)-2,3,4-trihydroxycyclohexanone by the reduction of a keto-conduritol derivative, the latter being prepared in five steps from (-)-(2S,3R,4S,5S)-2,3,4-tribenzyloxy-5-hydroxycyclohexanone, which is in turn readily synthesized from D-glucose.