Synthesis and characterization of a new polysaccharide-graft-polymethacrylate copolymer for three-dimensional hybrid hydrogels

Hybrid materials constituted by hydrophobic and hydrophilic biocompatible macromolecules are useful for biomedical applications. In this context, a well-known acrylic monomer (methyl methacrylate) was polymerized and grafted onto the polysaccharide dextran by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. The effects of concentrations of dextran, acrylic monomer, and ceric ions on the copolymerization yields were investigated in detail. The obtained polymers were studied by solubility measurements, Fourier transform infrared spectrometry, (13)C nuclear magnetic resonance spectroscopy, and viscosimetric analysis. Interestingly, we found conditions to form transparent and homogeneous thin films or 3D structures with hybrid properties. Indeed, the copolymer, but not dextran or PMMA, could be dissolved in water/THF (20/80 v/v). The thermomechanical properties of the resulting copolymer analyzed by differential scanning calorimetry and dynamic mechanical analysis showed the occurrence of a single glass-transition temperature and a marked difference with the two homopolymers. The cytocompatibility of the copolymer with human endothelial cells was evidenced by the normal cell adhesion, proliferation, and morphology after 5 days in culture on these gels. In conclusion, this type of copolymer with hybrid properties of two biocompatible macromolecules could be of great interest as a 3D scaffold or for coating in biomedical applications.     

Gradients with depth in electrospun fibrous scaffolds for directed cell behavior

A major obstacle in creating viable tissue-engineered constructs using electrospinning is the lack of complete cellularization and vascularization due to the limited porosity in these densely packed fibrous scaffolds. One potential approach to circumvent this issue is the use of various gradients of chemical and biophysical cues to drive the infiltration of cells into these structures. Toward this goal, this study focused on creating durotactic (mechanical) and haptotactic (adhesive) gradients through the thickness of electrospun hyaluronic acid (HA) scaffolds using a unique, yet simple, modification of common electrospinning protocols. Specifically, both mechanical (via cross-linking: ranging from 27-100% modified methacrylated HA, MeHA) and adhesive (via inclusion of the adhesive peptide RGD: 0-3 mM RGD) gradients were each fabricated by mixing two solutions (one ramping up, one ramping down) prior to electrospinning and fiber collection. Gradient formation was verified by fluorescence microscopy, FTIR, atomic force microscopy, and cellular morphology assessment of scaffolds at different points of collection (i.e., with scaffold thickness). To test further the functionality of gradient scaffolds, chick aortic arch explants were cultured on adhesive gradient scaffolds for 7 days, and low RGD-high RGD gradient scaffolds showed significantly greater cell infiltration compared with high RGD-low RGD gradients and uniform high RGD or uniform low RGD control scaffolds. In addition to enhanced infiltration, this approach could be used to fabricate graded tissue structures, such as those that occur at interfaces.     

Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells

Electrospun nanocomposite scaffolds were fabricated by encapsulating multi-walled carbon nanotubes (MWNT) in poly (lactic acid) (PLA) nanofibers. Scanning electron microscopy (SEM) confirmed the fabrication of nanofibers, and transmission electron microscopy identified the alignment and dispersion of MWNT along the axis of the fibers. Tensile testing showed an increase in the tensile modulus for a MWNT loading of 0.25 wt% compared with electrospun nanofibrous mats without MWNT reinforcement. Conductivity measurements indicated that the confined geometry of the fibrous system requires only minute doping to obtain significant enhancements at 0.32 wt%. Adipose-derived human mesenchymal stem cells (hMSCs) were seeded on electrospun scaffolds containing 1 wt% MWNT and 0 wt% MWNT, to determine the efficacy of the scaffolds for cell growth, and the effect of MWNT on hMSC viability and proliferation over two weeks in culture. Staining for live and dead cells and DNA quantification indicated that the hMSCs were alive and proliferating through day 14. SEM images of hMSCs at 14 days showed morphological differences, with hMSCs on PLA well spread and hMSCs on PLA with 1% MWNT closely packed and longitudinally aligned.     

Fabrication of thin-layer matrigel-based constructs for three-dimensional cell culture

Extracellular matrix-based hydrogels such as Matrigel are easy-to-use, commercially available, and offer environments for three-dimensional (3-D) cell culture that mimic native tissue. However, manipulating small volumes of these materials to produce thin-layer 3-D culture systems suitable for analysis is difficult because of air–liquid-substrate interfacial tension effects and evaporation. Here, we demonstrate two simple techniques that use standard liquid-handling tools and nontreated 96-well plates to produce uniform, thin-layer constructs for 3-D culture of cells in Matrigel. The first technique, the floating 3-D cell culture method, uses phase-separating polymers to form a barrier between the dispensed Matrigel, air, and cultureware surface to generate consistently thin hydrogels from volumes as low as 5 μL. These unanchored gels provide a useful assay for investigating airway smooth muscle cell contraction and may have future applications in studying asthma pathophysiology. The second technique, the fixed 3-D cell culture method, provides an anchored gel system for culturing noncontractile cells (e.g., neurons) where 20 μL of Matrigel is dispensed into the bottom of a well filled with culture medium to form a thin gel containing embedded cells. This technique has potential widespread applications as an accessible 3-D culture platform for high-throughput production of disease models for evaluation of novel drug therapies. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2733, 2019     

The effect of implantation on scaffoldless three-dimensional engineered bone constructs

Our laboratory has previously developed scaffoldless engineered bone constructs (EBC). Bone marrow stromal cells (BMSC) were harvested from rat femur and cultured in medium that induced osteogenic differentiation. After reaching confluence, the monolayer of cells contracted around two constraint points forming a cylinder. EBCs were placed in small diameter (0.5905 × 0.0625 in.) or large diameter (0.5905 × 0.125 in.) silicone tubing and implanted intramuscularly in the hind limb of a rat. Bone mineral content (BMC) of the EBC was analyzed before implantation and at 1 and 2 mo following implantation and compared to that of native femur bone at different stages of development. Negligible BMC was observed in E-20 femur or EBCs prior to implantation. One-month implantation in both small and large tubing increased BMC in the EBC. BMC of EBC from large tubing was greater than in 14 d rat neonatal femurs, but was 2% and 3% of BMC content in adult bone after 1 and 2 mo of implantation, respectively. Alizarine Red and osteopontin staining of the EBCs before and after implantation confirmed increased bone mineralization in the implanted EBCs. Implanted EBCs also had extensive vascularization. Our data suggest that BMSC can be successfully used for the generation of scaffoldless EBC, and this model can be potentially used for the generation of autologous bone transplants in humans.     

Fabrication of conducting electrospun nanofibers scaffold for three-dimensional cells culture

Electrospinning is a versatile method to fabricate nanofibers of a range of polymeric and composite materials suitable as scaffolds for tissue engineering applications. In this study, we report the fabrication and characterization of polyaniline-carbon nanotube/poly(N-isopropyl acrylamide-co-methacrylic acid) (PANI-CNT/PNIPAm-co-MAA) composite nanofibers and PNIPAm-co-MAA nanofibers suitable as a three-dimensional (3D) conducting smart tissue scaffold using electrospinning. The chemical structure of the resulting nanofibers was characterized with FTIR and (1)H NMR spectroscopy. The surface morphology and average diameter of the nanofibers were observed by SEM. Cellular response of the nanofibers was studied with mice L929 fibroblasts. Cell viability was checked on 7th day of cell culture by double staining the cells with calcein-AM and PI dye. PANI-CNT/PNIPAm-co-MAA composite nanofibers were shown the highest cell growth and cell viability as compared to PNIPAm-co-MAA nanofibers. Cell viability in the composite nanofibers was obtained in order of 98% that indicates the composite nanofibers provide a better environment as a 3D scaffold for the cell proliferation and attachment suitable for tissue engineering applications.     

Facile and selective covalent grafting of an RGD‐peptide to electrospun scaffolds improves HUVEC adhesion

The development of a biomimetic surface able to promote endothelialization is fundamental in the search for blood vessel substitutes that prevent the formation of thrombi or hyperplasia. This study aims at investigating the effect of functionalization of poly‐ε‐caprolactone or poly(L‐lactic acid‐co‐?‐caprolactone) electrospun scaffolds with a photoreactive adhesive peptide. The designed peptide sequence contains four Gly‐Arg‐Gly‐Asp‐Ser‐Pro motifs per chain and a p‐azido‐Phe residue at each terminus. Different peptide densities on the scaffold surface were obtained by simply modifying the peptide concentration used in pretreatment of the scaffold before UV irradiation. Scaffolds of poly‐ε‐caprolactone embedded with adhesive peptides were produced to assess the importance of peptide covalent grafting. Our results show that the scaffolds functionalized with photoreactive peptides enhance adhesion at 24 h with a dose‐dependent effect and control the proliferation of human umbilical vein endothelial cells, whereas the inclusion of adhesive peptide in the electrospun matrices by embedding does not give satisfactory results. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Vascular tissue engineering: Fabrication and characterization of acetylsalicylic acid-loaded electrospun scaffolds coated with amniotic membrane lysate

As the incidence of small-diameter vascular graft (SDVG) occlusion is considerably high, a great amount of research is focused on constructing a more biocompatible graft. The absence of a biocompatible surface in the lumen of the engineered grafts that can support confluent lining with endothelial cells (ECs) can cause thrombosis and graft failure. Blood clot formation is mainly because of the lack of an integrated endothelium. The most effective approach to combat this problem would be using natural extracellular matrix constituents as a mimic of endothelial basement membrane along with applying anticoagulant agents to provide local antithrombotic effects. In this study, we fabricated aligned and random electrospun poly-L-lactic acid (PLLA) scaffolds containing acetylsalicylic acid (ASA) as the anticoagulation agent and surface coated them with amniotic membrane (AM) lysate. Vascular scaffolds were structurally and mechanically characterized and assessed for cyto- and hemocompatibility and their ability to support endothelial differentiation was examined. All the scaffolds showed appropriate tensile strength as expected for vascular grafts. Lack of cytotoxicity, cellular attachment, growth, and infiltration were proved using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and scanning electron microscopy. The blood compatibilities of different scaffolds examined by in vitro hemolysis and blood coagulation assays elucidated the excellent hemocompatibility of our novel AM-coated ASA-loaded nanofibers. Drug-loaded scaffolds showed a sustained release profile of ASA in 7 days. AM-coated electrospun PLLA fibers showed enhanced cytocompatibility for human umbilical vein ECs, making a confluent endothelial-like lining. In addition, AM lysate-coated ASA-PLLA-aligned scaffold proved to support endothelial differentiation of Wharton's jelly-derived mesenchymal stem cells. Our results together indicated that AM lysate-coated ASA releasing scaffolds have promising potentials for development of a biocompatible SDVG.     

In vitro bone growth responds to local mechanical strain in three-dimensional polymer scaffolds

Mechanical stimulation plays a key role in healing and remodelling of bone tissue in vivo, and is used in bone tissue regeneration strategies in vitro. Although macroscopic compression of three-dimensional (3-D) seeded constructs can increase bone formation, it is not yet reported how this response is related to differences in local mechanical strains inside the scaffolds. In this study, we experimentally test the hypothesis that differences in local average of heterogeneous strains in a polymer scaffold will correlate with induced differences in the local biological response.Twenty-four poly(l-lactic acid) porous scaffolds seeded with rat bone cells were cultured first for 2 and 3 weeks under static conditions, respectively. Then for 1 week, half of the scaffolds were cyclically compressed (1.5%, 1 Hz), 1 h daily, with continuous perfusion (0.1 ml/min). The remaining half was kept under static conditions. The pore-surface strains in the scaffolds at the start of culture were calculated with micro-finite element modelling based on micro-Computed Tomography (μCT) images. The locations of mineralized nodules were determined from μCT images and coupled to the calculated strains.Detectable mineralized nodules (>10³ μm³) were only present in the loaded samples. Averages of absolute principal strains at the start of culture were significantly higher at nodule sites than at sites without a nodule.The results support the hypothesis that regenerating bone tissue in a 3-D porous scaffold responds to local mechanical strain. The methodology presented in this study can contribute design optimisation of tissue regeneration strategies relying on mechanical stimulation.     

Scaffold stiffness affects the contractile function of three-dimensional engineered cardiac constructs

We investigated the effects of the initial stiffness of a three-dimensional elastomer scaffold--highly porous poly(glycerol sebacate)--on functional assembly of cardiomyocytes cultured with perfusion for 8 days. The polymer elasticity varied with the extent of polymer cross-links, resulting in three different stiffness groups, with compressive modulus of 2.35 ± 0.03 (low), 5.28 ± 0.36 (medium), and 5.99 ± 0.40 (high) kPa. Laminin coating improved the efficiency of cell seeding (from 59 ± 15 to 90 ± 21%), resulting in markedly increased final cell density, construct contractility, and matrix deposition, likely because of enhanced cell interaction and spreading on scaffold surfaces. Compact tissue was formed in the low and medium stiffness groups, but not in the high stiffness group. In particular, the low stiffness group exhibited the greatest contraction amplitude in response to electric field pacing, and had the highest compressive modulus at the end of culture. A mathematical model was developed to establish a correlation between the contractile amplitude and the cell distribution within the scaffold. Taken together, our findings suggest that the contractile function of engineered cardiac constructs positively correlates with low compressive stiffness of the scaffold.     

Responsive hybrid hydrogels with volume transitions modulated by a titin immunoglobulin module

The I28 immunoglobulin (Ig)-like module of human cardiac titin, an elastic muscle protein, was used to cross-link acrylamide (AAm) copolymers into hybrid hydrogels. Cross-linking was accomplished through metal coordination bonding between terminal histidine tags (His tags) of the I28 module and metal-chelating nitrilotriacetic acid (NTA)-containing side chains on the copolymer. In solution, the beta-sheet structure of the I28 module unfolded with a transition midpoint of about 58 degrees C as the temperature was elevated. Hydrogels cross-linked with the I28 module demonstrated positive temperature responsiveness; they swelled to 3 times their initial volume at temperatures above the melting temperature of the cross-links. Positive temperature responsiveness is unusual for synthetic hydrogels. The I28 hybrid hydrogels demonstrate that cross-linking synthetic polymers with natural, well-characterized protein modules is a practical strategy for creating new materials with unique environmental responsiveness predictably determined by the mechanical properties of the protein cross-links. These new materials may be useful for controlled chemical delivery.     

Probing of exosites leads to novel inhibitor scaffolds of HCV NS3/4A proteinase

Background

Hepatitis C is a treatment-resistant disease affecting millions of people worldwide. The hepatitis C virus (HCV) genome is a single-stranded RNA molecule. After infection of the host cell, viral RNA is translated into a polyprotein that is cleaved by host and viral proteinases into functional, structural and non-structural, viral proteins. Cleavage of the polyprotein involves the viral NS3/4A proteinase, a proven drug target. HCV mutates as it replicates and, as a result, multiple emerging quasispecies become rapidly resistant to anti-virals, including NS3/4A inhibitors.

Methodology/Principal Findings

To circumvent drug resistance and complement the existing anti-virals, NS3/4A inhibitors, which are additional and distinct from the FDA-approved telaprevir and boceprevir α-ketoamide inhibitors, are required. To test potential new avenues for inhibitor development, we have probed several distinct exosites of NS3/4A which are either outside of or partially overlapping with the active site groove of the proteinase. For this purpose, we employed virtual ligand screening using the 275,000 compound library of the Developmental Therapeutics Program (NCI/NIH) and the X-ray crystal structure of NS3/4A as a ligand source and a target, respectively. As a result, we identified several novel, previously uncharacterized, nanomolar range inhibitory scaffolds, which suppressed of the NS3/4A activity in vitro and replication of a sub-genomic HCV RNA replicon with a luciferase reporter in human hepatocarcinoma cells. The binding sites of these novel inhibitors do not significantly overlap with those of α-ketoamides. As a result, the most common resistant mutations, including V36M, R155K, A156T, D168A and V170A, did not considerably diminish the inhibitory potency of certain novel inhibitor scaffolds we identified.

Conclusions/Significance

Overall, the further optimization of both the in silico strategy and software platform we developed and lead compounds we identified may lead to advances in novel anti-virals.     

Preparation and characterization of imogolite/DNA hybrid hydrogels

Imogolite is one of the clay minerals contained in volcanic ash soils. The novel hybrid hydrogels were prepared from imogolite nanofibers and DNA by utilizing strong interaction between the aluminol groups on imogolite surface and phosphate groups of DNA. The hybrid hydrogels of imogolite and DNA were prepared in various feed ratios, and their physicochemical properties and molecular aggregation states were investigated in both dispersion and gel states. The maximum DNA content in the hybrid gels was shown in equivalent molar ratio of imogolite and DNA. The physical properties of the hybrid gels were changed by varying DNA blend ratios. In the dispersion state, the hybrid gels showed a fibrous structure of imogolite, whereas a continuous network structure was observed in pure imogolite, indicating that the hybrid with DNA enhanced the dispersion of imogolite. In the gel state, DNA and imogolite nanofibers formed a 3D network structure.     

Modeling the behavior of human induced pluripotent stem cells seeded on melt electrospun scaffolds

Background

Human induced pluripotent stem cells (hiPSCs) can form any tissue found in the body, making them attractive for regenerative medicine applications. Seeding hiPSC aggregates into biomaterial scaffolds can control their differentiation into specific tissue types. Here we develop and analyze a mathematical model of hiPSC aggregate behavior when seeded on melt electrospun scaffolds with defined topography.

Results

We used ordinary differential equations to model the different cellular populations (stem, progenitor, differentiated) present in our scaffolds based on experimental results and published literature. Our model successfully captures qualitative features of the cellular dynamics observed experimentally. We determined the optimal parameter sets to maximize specific cellular populations experimentally, showing that a physiologic oxygen level (～?5%) increases the number of neural progenitors and differentiated neurons compared to atmospheric oxygen levels (～?21%) and a scaffold porosity of ～?63% maximizes aggregate size.

Conclusions

Our mathematical model determined the key factors controlling hiPSC behavior on melt electrospun scaffolds, enabling optimization of experimental parameters.

     

Novel hybrid scaffolds for the cultivation of osteoblast cells

In this study, natural biodegradable polysaccharide, chitosan, and synthetic biodegradable polymer, poly(?-caprolactone) (PCL) were used to prepare 3D, hybrid polymeric tissue scaffolds (PCL/chitosan blend and PCL/chitosan/PCL layer by layer scaffolds) by using the electrospinning technique. The hybrid scaffolds were developed through HA addition to accelerate osteoblast cell growth. Characteristic examinations of the scaffolds were performed by micrometer, SEM, contact angle measurement system, ATR-FTIR, tensile machine and swelling experiments. The thickness of all electrospun scaffolds was determined in the range of 0.010 ± 0.001-0.012 ± 0.002 mm. In order to optimize electrospinning processes, suitable bead-free and uniform scaffolds were selected by using SEM images. Blending of PCL with chitosan resulted in better hydrophilicity for the PCL/chitosan scaffolds. The characteristic peaks of PCL and chitosan in the blend and layer by layer nanofibers were observed. The PCL/chitosan/PCL layer by layer structure had higher elastic modulus and tensile strength values than both individual PCL and chitosan structures. The layer by layer scaffolds exhibited the PBS absorption values of 184.2; 197.2% which were higher than those of PCL scaffolds but lower than those of PCL/chitosan blend scaffolds. SaOs-2 osteosarcoma cell culture studies showed that the highest ALP activities belonged to novel PCL/chitosan/PCL layer by layer scaffolds meaning better cell differentiation on the surfaces.     

Effects of three-dimensional scaffolds on cell organization and tissue development

Tissue engineering scaffolds play a critical role in regulating the reconstructed human tissue development. Various types of scaffolds have been developed in recent years, including fibrous matrix and foam-like scaffolds. The design of scaffold materials has been investigated extensively. However, the design of physical structure of the scaffold, especially fibrous matrices, has not received much attention. This paper compares the different characteristics of fibrous and foam-like scaffolds, and reviews regulatory roles of important scaffold properties, including surface geometry, scaffold configuration, pore structure, mechanical property and bioactivity. Tissue regeneration, cell organization, proliferation and differentiation under different microstructures were evaluated. The importance of proper scaffold selection and design is further discussed with the examples of bone tissue engineering and stem cell tissue engineering. This review addresses the importance of scaffold microstructure and provides insights in designing appropriate scaffold structure for different applications of tissue engineering.     

Transient immunosuppressive treatment leads to long-term retention of allogeneic myoblasts in hybrid myofibers

Normal and genetically engineered skeletal muscle cells (myoblasts) show promise as drug delivery vehicles and as therapeutic agents for treating muscle degeneration in muscular dystrophies. A limitation is the immune response of the host to the transplanted cells. Allogeneic myoblasts are rapidly rejected unless immunosuppressants are administered. However, continuous immunosuppression is associated with significant toxic side effects. Here we test whether immunosuppressive treatment, administered only transiently after allogeneic myoblast transplantation, allows the long-term survival of the transplanted cells in mice. Two immunosuppressive treatments with different modes of action were used: (a) cyclosporine A (CSA); and (b) monoclonal antibodies to intracellular adhesion molecule-1 and leukocyte function- associated molecule-1. The use of myoblasts genetically engineered to express beta-galactosidase allowed quantitation of the survival of allogeneic myoblasts at different times after cessation of the immunosuppressive treatments. Without host immunosuppression, allogeneic myoblasts were rejected from all host strains tested, although the relative time course differed as expected for low and high responder strains. The allogeneic myoblasts initially fused with host myofibers, but these hybrid cells were later destroyed by the massive immunological response of the host. However, transient immunosuppressive treatment prevented the hybrid myofiber destruction and led to their long-term retention. Even four months after the cessation of treatment, the hybrid myofibers persisted and no inflammatory infiltrate was present in the tissue. Such long-term survival indicates that transient immunosuppression may greatly increase the utility of myoblast transplantation as a therapeutic approach to the treatment of muscle and nonmuscle disease.     

Design of hybrid hydrogels with self-assembled nanogels as cross-linkers: interaction with proteins and chaperone-like activity

New hybrid hydrogels with nanogel domains were obtained by using polymerizable self-assembled nanogels as cross-linkers. Methacryloyl groups were introduced to cholesteryl group-bearing pullulan (CHP). The methacryloyl group-bearing CHPs (CHPMAs) formed nanogels by their self-association in water (R(g) = 14-17 nm). CHPMA nanogels were polymerized with 2-methacryloyloxyethyl phosphorylcholine (MPC) by radical polymerization in a semidilute aqueous solution. CHPMA nanogels acted as effective cross-linkers for gelation. TEM observation showed that the nanogel structure was retained after gelation and that the nanogels were well dispersed in the macrogel. The hybrid hydrogels showed two well-defined networks such as a nanogel intranetwork structure of less than 10 nm (physically cross-linking) and an internetwork structure of several hundred nanometers (chemically cross-linking). The immobilized nanogels retained their ability to trap and release protein (insulin was used as a model protein) by host-guest interaction of the cholesteryl group and cyclodextrin and also showed high chaperone-like activity for refolding of chemically denatured protein.