Genetic influences on dentition and dental arch dimensions: a study of monozygotic and dizygotic triplets

Previous studies of the tooth and dental arch dimensions in twins have suggested that the size and form of the dentition is more under genetic control than the size and form of the dental arch. A study of dentition and dental arch was carried out on three sets of same-sex triplets, two sets being monozygotic and one set dizygotic. No significant differences were found in the dental arch dimensions in any set of the triplets. The tooth dimensions showed no significant differenes in the monozygotic triplet sets or in the monozygotic pair from the dizygotic triplet set, but showed significant differences between the monozygotic pair and the third member of the dizygotic set. This confirms the data obtained from twin studies.     

Heritability of dental arch dimensions in humans.

The purposes of this study were to estimate the heritabilities of several human dental arch dimensions and compare the hereditary differences among kinships and among variables. The sample consisted of 102 Japanese families, each including both parents and one of their offspring, and on average all subjects had relatively well-aligned permanent dentitions. The heritabilities of all variables were estimated from the regression of offspring on parent and on midparent. Results showed that genetics played a role regarding dental arch dimensions, and arch perimeter (sum of tooth width) was a more definite genetic-related factor than other arch dimensions, such as width, length, or size. There were few significant hereditary differences between sons and daughters, and between upper and lower arches for each variable. Sex chromosomal involvement was not confirmed, but maternal effects were found to be more evident in daughters than in sons, for both arches. Comparisons among the heritabilities of overall and of anterior arch dimensions indicated that size of the anterior part of the dental arch might be less resistant to environmental factors, especially in case of the lower arch.     

A study of the taxonomic significance of the dental arch.

Sixteen dimensions were measured from the maxillary and mandibular dental arches of different ethnic groups of man, apes and monkeys. Multivariate analysis showed that discrimination was possible among the ethnic groups of man on the one hand and between the ape and monkey samples on the other. Nevertheless, the actual degree of discrimination between the primate samples depended upon whether the maxillary or mandibular arch dimensions were analysed. Furthermore, subsequent inclusion of the dental arch dimensions of fossil hominoid samples into the analysis confirmed the taxonomic significance of the dental arch, although its importance must await the acquisition of the more non-human primate data.     

Comparative study of mesiodistal crown diameters and arch dimensions between indigenous British and Pakistani immigrant populations

Over the last two decades, the United Kingdom has seen an increase in the number of immigrants from the Indian subcontinent, mainly Pakistan. The amount of information that is available regarding parameters such as mesiodistal crown diameters and dental arch dimensions is, however, somewhat limited for this population. An investigation was carried out to compare corresponding mesiodistal crown diameters and arch dimensions between samples of the indigenous British population in Leeds (England) and the Pakistani immigrant population living in Rochdale (England). Measurements were taken from dental casts. The results showed that there were no significant differences between the two ethnic groups in corresponding mesiodistal crown diameters or arch dimensions. Data are provided for the Pakistani immigrant population in Britain.     

Non-human primate dental arch form.

Multivariate statistical analysis, based upon a number of dimensions, showed significant contrasts in dental arch form between four primate groups, which was difficult to identify from subjective visual inspection. Furthermore, analysis of dental arch size was shown to differ from dental arch shape, although whether this reflected predominantly genetic or environmental factors, requires further research.     

The relationship of dental crowding to tooth size, dental arch width, and arch depth

This study was undertaken to answer the question, "Are there any differences in the mesiodistal tooth diameters, dental arch width and dental arch depth between the crowded and noncrowded dentitions?" The materials submitted for study consisted of the Orthoscan intraoral occlusograms of 89 subjects with well-aligned dentition and those of 74 subjects with gross dental crowding. The tooth size and arch dimensions were measured from these intraoral occlusograms. The data were subjected to statistical treatment for comparison of noncrowded and crowded groups. The findings in this study lead to the following conclusions: The mesiodistal tooth diameters of the crowded group were significantly larger than those of the noncrowded group. The dental arch widths of the crowded group were significantly smaller than those of the noncrowded group. No substantial or significant difference in dental arch depth between the crowded and noncrowded subjects could be noted. From these findings it seems that tooth size and dental arch width are determining factors in the formation of dental crowding. Clinically, these results suggest that in the treatment of dental crowding, extraction of teeth and/or expansion of dental arches should be considered depending on what is the main causative factor.     

A comparative study of tooth and dental arch dimensions in Jewish children of different ethnic descent. I. Kurds and Yemenites

Dental casts of 99 Kurdish and 98 Yemenite Jewish children evenly distributed between the sexes, aged 12 years, were measured for mesio-distal and buccolingual tooth dimensions, and arch depth and width. Dental dimensions showed significant differences between the two groups in certain permanent teeth in mesiodistal length, while in the buccolingual diameter the differences did not reach statistical significance. Dental arch form in Kurdish children was more rounded due to significantly bigger arch width, while arch depth was not significantly different from Yemenites. Intragroup sex differences were found in both groups with reference to arch dimensions, while in the dental parameters they were more strongly expressed in Kurdish children.     

Longitudinal study of dental arch relationships in Australian aboriginals with reference to alternate intercuspation

The patterns of age change in dental arch breadths and depths were studied longitudinally in Australian Aboriginals, 92 males and 68 females. Three types of change in relative arch dimensions were recognized: a divergent pattern in which the differences between maxillary and mandibular dimensions increased with age, a convergent pattern in which the differences decreased, and a parallel pattern in which the arch differences remained metrically stable. The feature that best distinguished the Aboriginals from Caucasian groups was the high frequency of subjects, 71% of males and 40% of females, who showed a divergent growth pattern. The association between divergent growth in arch breadths and the development of alternate intercuspation, which is characterized by an inability to occlude the teeth on both sides of the arch at the same time, is discussed.     

Dental arch form in the cercopithecidae

The dental arches of the major genera of Old World monkeys (superfamily Cercopithecoidea) were studied by morphometric techniques. Bicanine and bimolar breadths and arch lengths were ascertained for maxillary and mandibular arches. This data was then subjected to a variety of statistical tests. Corresponding arch dimensions of the upper and lower dentition showed the highest correlations, while the lowest correlations were generally observed between comparisons of arch dimensions and body size. A new expression was developed, relative male palate size (RMPS), which quantified the degree of sexual dimorphism while correcting for body size. The four hierarchies examined using RMPS values were sexual dimorphism, modes of sexual selection and predator defense and diet. Maxillary bicanine breadth was the only parameter that exhibited sexual dimorphism consistently in each of the four hierarchies, although differences in arch size were identified for diet and predator defense. Species grouped by predator defense showed the most sexual dimorphism in arch parameters.     

Interspecific allometry of the mandible,dental arch,and molar area in anthropoid primates: Functional morphology of masticatory components

Allometric equations relating the lengths and widths of the mandible and dental arch, and of molar area, were obtained in a wide range of anthropoid primates grouped into four subsets, pongids, cercopithecids, nonmarmoset platyrrhines, and marmosets. Mandibular width is negatively allometric against length across anthropoids but cercopithecids had relatively wider mandibles than nonmarmosets of the same size class. Mandibular length relative to dental arch length was isometric within and between the four groups but dental arch width scaled negatively against all the other dimensions examined in this study, indicating a functional dissociation between the dental arcade and the bony mandible. Molar area showed various scaling patterns relative to mandibular length (isometry) and width (positive). There were no parameters that scaled positively against body weight across groups, except for molar area in cercopithecids (strongly) and nonmarmoset (moderately). Notable functional specializations include relatively long dental arches in cercopithecoids, related to large, elongate bilophodont molars, and the tendency to increase relative jaw length across the range of anthropoid sizes, reflecting negative allometry of the brain (cranial bicondylar width). We caution that various allometry and functional patterns may be masked by generalizing from broad taxonomic comparison involving a large sweep of adaptative patterns.     

The Aymara of Western Bolivia. II. Maxillofacial and dental arch variation

Maxillofacial and dental arch dimensions of the Bolivian Aymara population are age and sex dependent. Interpopulational comparisons reveal these dimensions to differ from those seen in Aleuts, Australian aborigines, and Swedes, but to be similar to those of the indigenous Taiwanese. Finally, these dimensions are not the same in Aymara of unmixed ancestry, and Mestizos residing in the same villages.     

Three-dimensional assessment of transverse dentoskeletal mandibular dimensions after utilizing two designs of fixed mandibular expansion appliance: A prospective clinical investigation

The aim of this clinical study was to evaluate and compare the dentoskeletal transverse mandibular arch dimensions following the use of two designs of fixed mandibular expanders using cone beam computed tomography (CBCT). Twenty orthodontic patients, 12 females and 8 males, with mean age of 13.4 ± 0.5 years were selected and randomly divided into two equivalent groups; group A consisted of 10 patients (4 boys, 6 girls) who were treated with modified Williams expander and group B consisted of 10 patients (4 boys, 6 girls) who were treated with a two-arm fixed expander. Consistent expansion instructions were given to all patients according to a standardized slow protocol of one quarter turn twice/week for both expanders. Routine orthodontic records as well as mandibular CBCTs were obtained before (T1) and immediately after expansion (T2) to estimate changes in dentoskeletal mandibular transverse dimensions. The data was statistically analyzed and the significance level was set at p ≤ 0.05. Mandibular intercanine, inter-premolar, intermolar widths; and arch perimeter were significantly increased (p ≤ 0.05) following expansion with both fixed expanders. However, the changes in inter-premolar width, intercanine width, and arch perimeter were significantly augmented in two-arm fixed expander group than modified Williams’s group. In contrast, their effects on the skeletal mandibular body width were non-significant (p > 0.05). Both expanders yielded significant and equivalent dentoalveolar effects that were more evident with two-arm fixed expander than the William one. Both fixed designs enhanced mandibular transverse dental dimensions; however, they were unsuccessful to create any considerable skeletal effects.     

Palatal and dental arch morphology in Down syndrome

The analysis of palatal vault morphology and maxillary dental arch shape was carried out in the sample of 42 Down syndrome (DS) patients with trisomy 21. The data were compared to those of healthy controls from the same population matched for age and sex. Palatal morphology and upper dental arch shape were studied on hard plaster casts of the patients and controls. No sexual dimorphism in palatal and dental arch shape was observed in DS and controls. Normal palatal shape was more frequent in controls than in DS subjects (52.38% vs. 28.57%; p < 0.05). DS patients displayed significantly higher frequency of shelf-like or "stair palate" (38.1%) than controls (11.9%) (p < 0.02). The younger age group (3-14 year) showed much higher frequency of "stair palate" than controls (26.19% vs. 2.38%; c2 = 9.72; p = 0.003). The older group of DS patients did not show increased frequency of such shape of the palatal vault. There was no significant difference in dental arch shape between DS patients and controls. High frequency of shelf-like palate in DS subjects is decreasing by age. The obtained results indicate that palatal vault morphology is subjected to the age related changes. These changes can be attributed to the growth of caraniofacial structures and increased tonus of tongue and other orofacial muscles.     

Morphology of Liberian Negro deciduous teeth. II. Arch dimensions and occlusion

Liberian Negro deciduous dentitions have arch dimensions which significantly exceed those of a variety of White populations. Winged incisors were present in 14.3% of the Negro population, again exceeding White values. No differences were noted in incisal overbite or overjet. Diastemal spaces were greater in the Negro dentitions than in the White, but the significance of this is as yet unknown. An exceptional finding was the absolute lack of Class II (distocclusion) in the Negro series. A discussion of functional occlusion stressed the necessity for the inclusion of such dynamic factors as dental abrasion, mesial migration and physiological rest position in future studies of comparative dental anthropology.     

儿童下牙弓发育的测量

本研究测量了１９３６名６－１２岁男女儿童的下颌牙弓的宽度和弦长。儿童前牙弓在７－９岁时增长最快,为此时恒尖牙萌出所致,１０岁以后各年龄组均数差异检验没有显著性意义。在整个替牙期,儿童前牙弓宽度约增加２ｍｍ,弦长增加１．８ｍｍ,儿童后牙弓的宽度和弦长约增加１ｍｍ左右。男孩前牙弓宽度比女孩大１ｍｍ左右。后牙弓的宽度和弦箕各年龄组均为男大于女,约１ｍｍ在右。可以把小学年龄阶段儿童的牙列分为乳牙弓、第１恒     

A computer program for the analysis of dental arch form using the cubic spline function.

This paper presents the details and logic of a FORTRAN computer program which fits a cubic interpolatory spline to a set of data points digitized from an exact size photographic reproduction of a dental model. It also measures the length of the arc and computes a set of normals to the curve to be used in evaluating the error in the fit of the spline. The program is used in studies of dental arch form and is useful in evaluating changes in the form of the arches due to orthodontic treatment. The measurement of the arc length provides an adequate assessment of space available in the dental arch, which is of importance to the orthodontist.     

Risk factors for poor dental arch relationships in young children born with unilateral cleft lip and palate

To identify risk factors for poor dental arch relationships in children with unilateral cleft lip and palate in the United Kingdom, the authors performed a cross-sectional outcome study with retrospective data capture of treatment histories in children under the care of 44 cleft teams in the United Kingdom. The study sample comprised 238 children born with nonsyndromic complete unilateral cleft lip and palate between April 1, 1989, and March 31, 1991, who were between 5.0 and 7.7 years of age (mean age, 6.5 years) at the time of data collection. The Five-Year-Old Index was used to rank dental arch relationships from dental study models. Velopharyngeal insufficiency was assessed with the use of the Cleft Audit Protocol for Speech. An independent panel recorded surgical treatment histories from the clinical notes. There was no association between the technique and the timing of primary repair, the experience of the surgeon, or presurgical orthopedics and dental arch relationships. Secondary velopharyngeal surgery was independently associated with poor outcome (OR, 4.14; 95 percent CI, 1.6 to 10.7; p = 0.003). Primary nasal repair was protective (OR, 0.47; 95 percent CI, 0.23 to 0.93; p = 0.031) against poor dental arch relationships. Secondary velopharyngeal surgery and primary nasal repair were found to be independently associated with dental arch relationship outcomes in young children with unilateral cleft lip and palate in the United Kingdom.     

Accuracy in Dental Medicine,A New Way to Measure Trueness and Precision

Reference scanners are used in dental medicine to verify a lot of procedures. The main interest is to verify impression methods as they serve as a base for dental restorations. The current limitation of many reference scanners is the lack of accuracy scanning large objects like full dental arches, or the limited possibility to assess detailed tooth surfaces. A new reference scanner, based on focus variation scanning technique, was evaluated with regards to highest local and general accuracy. A specific scanning protocol was tested to scan original tooth surface from dental impressions. Also, different model materials were verified. The results showed a high scanning accuracy of the reference scanner with a mean deviation of 5.3 ± 1.1 µm for trueness and 1.6 ± 0.6 µm for precision in case of full arch scans. Current dental impression methods showed much higher deviations (trueness: 20.4 ± 2.2 µm, precision: 12.5 ± 2.5 µm) than the internal scanning accuracy of the reference scanner. Smaller objects like single tooth surface can be scanned with an even higher accuracy, enabling the system to assess erosive and abrasive tooth surface loss. The reference scanner can be used to measure differences for a lot of dental research fields. The different magnification levels combined with a high local and general accuracy can be used to assess changes of single teeth or restorations up to full arch changes.     

Congenital defects of the upper lateral incisors: Multivariate analysis of measurements of the other teeth,the superior arch,head and face

The survey of a French male population allowed us to ascertain 75 propositi with one or two missing ULI, 59 propositi with one or two reduced ULI and 99 controls on whom measurements (mesiodistal and buccolingual diameters) of all teeth of the superior arch are available. Principal Component Analysis gave a first estimated principal component highly correlated with each of the dental measurements or arch measurements. This size factor was eliminated by observing the plane of the second and third principal components. Strikingly different clusters of MD diameters or BL diameters were observed for the controls, the propositi missing one or two of the ULI and the propositi with reduced ULI. For the controls, the arch length is correlated with the MD molar diameters and the MD incisor diameter, the arch width being isolated from the other measurements. For the propositi with missing ULI, among the dental measurements the MD and BL diameters cluster, the arch length is isolated as are the arch widths. For the propositi with reduced ULI, the arch length is closer to the dental measurements while the widths, especially the first one, are isolated. The best discriminant measurements are the diameters of the first premolars and the canine, the first arch width and the arch length. Among controls, the arch is narrowed and shorter for the propositi with absence and wider for the propositi with reduction. Teeth measurements are always smaller in propositi.     

Nasal shape,prognathism and adaptation in man

The association between nasal shape, prognathism and the shape of the maxillary dental arch has been examined within samples of Negro and European skulls. Prognathism tends to be accompanied by an increasingly broad and short nose. Particularly high correlations exist between nasal height and the length of the cranial base and between nasal breadth and the distance which separates the upper canine teeth. Regression analysis has yielded quantitative estimates of the effect on a given dimension of variation in one or more of the others. It seems probable that both nasal shape and the maxillary dental arch-prognathism complex may be subject to direct selection by environmental stress. The morphological association between these complexes suggests that a part of the interpopulation variation in prognathism may be a secondary effect of selection acting on the nose. Similarly, selection acting on the dental arch or maxilla could produce secondary changes in the nasal index (i.e. a non-adaptive component of nasal variation).