A biphasic, anisotropic model of the aortic wall

A biphasic, anisotropic elastic model of the aortict wall is developed and compared to literature values of experimental measurements of vessel wall radii, thickness, and hvdraulic conductivity as a function of intraluminal pressure. The model gives good predictions using a constant wall modulus for pressures less than 60 mmHg, but requires a strain-dependent modulus for pressures greater than this. In both bovine and rabbit aorta, the tangential modulus is found to be approximately 20 times greater than the radial modulus. These moduli lead to predictions that, when perfused in a cylindrical geometry, the aortic volume and its specific hydraulic coonductivity are relatively independent of perfusion pressure, in agreement with experimental measurements. M, the parameter that relates specific hydraulic conductivy, to tissue dilation, is found to be a positive quantity correcting a previous error in the literature.     

A custom image-based analysis tool for quantifying elastin and collagen micro-architecture in the wall of the human aorta from multi-photon microscopy

The aorta possesses a micro-architecture that imparts and supports a high degree of compliance and mechanical strength. Alteration of the quantity and/or arrangement of the main load-bearing components of this micro-architecture – the elastin and collagen fibers – leads to mechanical, and hence functional, changes associated with aortic disease and aging. Therefore, in the future, the ability to rigorously characterize the wall fiber micro-architecture could provide insight into the complicated mechanisms of aortic wall remodeling in aging and disease. Elastin and collagen fibers can be observed using state-of-the-art multi-photon microscopy. Image-analysis algorithms have been effective at characterizing fibrous constructs using various microscopy modalities. The objective of this study was to develop a custom MATLAB-language automated image-based analysis tool to describe multiple parameters of elastin and collagen micro-architecture in human soft fibrous tissue samples using multi-photon microscopy images. Human aortic tissue samples were used to develop the code. The tool smooths, cleans and equalizes fiber intensities in the image before segmenting the fibers into a binary image. The binary image is cleaned and thinned to a fiber skeleton representation of the image. The developed software analyzes the fiber skeleton to obtain intersections, fiber orientation, concentration, porosity, diameter distribution, segment length and tortuosity. In the future, the developed custom image-based analysis tool can be used to describe the micro-architecture of aortic wall samples in a variety of conditions. While this work targeted the aorta, the software has the potential to describe the architecture of other fibrous materials, tube-like networks and connective tissues.     

The association of medial collagenous tissue with atheroma formation in the aging human aorta as revealed by a special technique

A new technique which brilliantly colors collagen fibers in a field of polarized light reveals that during mid-life the smooth muscle cells in the tunica media of the human aorta begin to disappear. The connective tissue is divided between two regions; one below the subintimal layer and the other under the adventitia. Fine collagen fibers extend upward from the former into the subintima and beyond into the intima and the overlying atheromatous plaques of the aging aorta. Thus, the source of fibrous thickening of the vessel is not confined solely to the intimal layer; at least, a portion of the total collagen content arises deep within the aortic wall.     

Characterization of a partially purified diacylglycerol lipase from bovine aorta

A partially-purified diacylglycerol (DG) lipase from bovine aorta has been characterized with respect to the effects of lipid metabolites and two lipase inhibitors, phenylboronic acid and tetrahydrolipstatin (THL). DG lipase activity was determined by the hydrolysis of the sn-1 position of 1-[1-⁴C]palmitoyl-2-oleoyl-sn-glycerol. The products of the lipase reaction, 2-monoacylglycerol (2-monoolein) and non-esterified fatty acids (oleate, arachidonate) produced a concentration-dependent (20–200 μM) inhibition of DG lipase activity. Oleoyl-CoA and dioleoylphosphatidic acid also inhibited aortic DG lipase activity, but lysophosphatidylcholine had little or no effect. The inhibition of aortic DG lipase by phenylboronic acid was competitive, with a K_i of approx. 4 mM. THL was a very potent inhibitor of aortic DG lipase; the concentration required for inhibition to 50% of control was 2–6 nM. THL was a very potent inhibitor of concentration of substrate in the assay was increased. Attempts to identify the aortic DG lipase by covalent-labelling with [¹⁴C]THL were unsuccessful. Immunoblotting experiments revealed that hormone-sensitive triacylglycerol lipase (HSL) could not be detected in bovine aorta.     

Unsteady and three-dimensional simulation of blood flow in the human aortic arch

A three-dimensional and pulsatile blood flow in a human aortic arch and its three major branches has been studied numerically for a peak Reynolds number of 2500 and a frequency (or Womersley) parameter of 10. The simulation geometry was derived from the three-dimensional reconstruction of a series of two-dimensional slices obtained in vivo using CAT scan imaging on a human aorta. The numerical simulations were obtained using a projection method, and a finite-volume formulation of the Navier-Stokes equations was used on a system of overset grids. Our results demonstrate that the primary flow velocity is skewed towards the inner aortic wall in the ascending aorta, but this skewness shifts to the outer wall in the descending thoracic aorta. Within the arch branches, the flow velocities were skewed to the distal walls with flow reversal along the proximal walls. Extensive secondary flow motion was observed in the aorta, and the structure of these secondary flows was influenced considerably by the presence of the branches. Within the aorta, wall shear stresses were highly dynamic, but were generally high along the outer wall in the vicinity of the branches and low along the inner wall, particularly in the descending thoracic aorta. Within the branches, the shear stresses were considerably higher along the distal walls than along the proximal walls. Wall pressure was low along the inner aortic wall and high around the branches and along the outer wall in the ascending thoracic aorta. Comparison of our numerical results with the localization of early atherosclerotic lesions broadly suggests preferential development of these lesions in regions of extrema (either maxima or minima) in wall shear stress and pressure.     

Computational analysis of blood flow in an integrated model of the left ventricle and the aorta

To study the effects of intraventricular flow dynamics on the aortic flow, we created an integrated model of the left ventricle and aorta and conducted a computer simulation of diastolic and systolic blood flow within this model. The results demonstrated that the velocity profile at the aortic annulus changed dynamically, and was influenced by the intraventricular flow dynamics. The profile was almost flat in early systole but became nonuniform as systole progressed, and was skewed toward the posterior side in midsystole and toward the anterior side in later systole. At a distance from the aortic annulus, a different velocity profile was induced by the twisting and torsion of the aorta. In the ascending aorta, the fastest flow was initially located in the posteromedial sector, and it moved to the posterior section along the circumference as systole progressed. The nonuniformity of the aortic inflow gave rise to a complex wall shear stress (WSS) distribution in the aorta. A comparison of the WSS distribution obtained in this integrated analysis with that obtained in flow calculations using an isolated aorta model with Poiseuille and flat inlet conditions showed that intraventricular flow affected the WSS distribution in the ascending aorta. These results address the importance of an integrated analysis of flow in the left ventricle and aorta.     

Hypoperfusion of the Adventitial Vasa Vasorum Develops an Abdominal Aortic Aneurysm

The aortic wall is perfused by the adventitial vasa vasorum (VV). Tissue hypoxia has previously been observed as a manifestation of enlarged abdominal aortic aneurysms (AAAs). We sought to determine whether hypoperfusion of the adventitial VV could develop AAAs. We created a novel animal model of adventitial VV hypoperfusion with a combination of a polyurethane catheter insertion and a suture ligation of the infrarenal abdominal aorta in rats. VV hypoperfusion caused tissue hypoxia and developed infrarenal AAA, which had similar morphological and pathological characteristics to human AAA. In human AAA tissue, the adventitial VV were stenotic in both small AAAs (30–49 mm in diameter) and in large AAAs (> 50 mm in diameter), with the sac tissue in these AAAs being ischemic and hypoxic. These results indicate that hypoperfusion of adventitial VV has critical effects on the development of infrarenal AAA.     

Axial nonuniformity of geometric and mechanical properties of mouse aorta is increased during postnatal growth

The hemodynamic conditions of aorta are relatively uniform prenatally and become more heterogeneous postnatally. Our objective was to quantify the heterogeneity of geometry and mechanical properties during growth and development. To accomplish this objective, we obtained a systematic set of data on the geometry and mechanical properties along the length of mouse aorta during postnatal development. C57BL/6 mice of ages 1-33 days were studied. The ascending aorta was cannulated in situ and preconditioned with several cyclic changes in pressure. We investigated the axial variations of geometry (diameter and length) and mechanical properties (stress-stain relation, elastic modulus and compliance) of the mouse aorta from the aortic valve to the common iliac. Our results show that the arterial blood pressure of mice increased from approximately 30 to 80 mmHg during the first 2 wk of life. The stretch ratio, diameter, wall (intima-media) thickness, and total lumen volume of mouse aorta increased with age. The aorta was transformed from a cylindrical tube at birth to a tapered structure during growth. Furthermore, we found the mechanical properties were fairly uniform along the length of the aorta at birth and become more nonuniform with age. We conclude that the rapid change of blood pressure and blood flow after birth alter the geometric and mechanical properties differentially along the length of the aorta. Hence, the axial nonuniformity of the aorta increases as the organ becomes more specialized during growth and development.     

Including surrounding tissue improves ultrasound-based 3D mechanical characterization of abdominal aortic aneurysms

ObjectivesIn this study the influence of surrounding tissues including the presence of the spine on wall stress analysis and mechanical characterization of abdominal aortic aneurysms using ultrasound imaging has been investigated.MethodsGeometries of 7 AAA patients and 11 healthy volunteers were acquired using 3-D ultrasound and converted to finite element based models. Model complexity of externally unsupported (aorta-only) models was complemented with inclusion of both soft tissue around the aorta and a spine support dorsal to the aorta. Computed 3-D motion of the aortic wall was verified by means of ultrasound speckle tracking. Resulting stress, strain, and estimated shear moduli were analyzed to quantify the effect of adding surrounding material supports.ResultsAn improved agreement was shown between the ultrasound measurements and the finite element tissue and spine models compared to the aorta-only models. Peak and 99-percentile Von Mises stress showed an overall decrease of 23–30%, while estimated shear modulus decreased with 12–20% after addition of the soft tissue. Shear strains in the aortic wall were higher in areas close to the spine compared to the anterior region.ConclusionsImproving model complexity with surrounding tissue and spine showed a homogenization of wall stresses, reduction in homogeneity of shear strain at the posterior side of the AAA, and a decrease in estimated aortic wall shear modulus. Future research will focus on the importance of a patient-specific spine geometry and location.     

A fast computational model for circulatory dynamics: effects of left ventricle–aorta coupling

The course of diseases such as hypertension, systolic heart failure and heart failure with a preserved ejection fraction is affected by interactions between the left ventricle (LV) and the vasculature. To study these interactions, a computationally efficient, biophysically based mathematical model for the circulatory system is presented. In a four-chamber model of the heart, the LV is represented by a previously described low-order, wall volume-preserving model that includes torsion and base-to-apex and circumferential wall shortening and lengthening, and the other chambers are represented using spherical geometries. Active and passive myocardial mechanics of all four chambers are included. The cardiac model is coupled with a wave propagation model for the aorta and a closed lumped-parameter circulation model. Parameters for the normal heart and aorta are determined by fitting to experimental data. Changes in the timing and magnitude of pulse wave reflections by the aorta are demonstrated with changes in compliance and taper of the aorta as seen in aging (decreased compliance, increased diameter and length), and resulting effects on LV pressure–volume loops and LV fiber stress and sarcomere shortening are predicted. Effects of aging of the aorta combined with reduced LV contractile force (failing heart) are examined. In the failing heart, changes in aortic properties with aging affect stroke volume and sarcomere shortening without appreciable augmentation of aortic pressure, and the reflected pressure wave contributes an increased proportion of aortic pressure.

     

Increased production of prostacyclin (PGI2) by vascular intimal smooth muscle cells from atherosclerotic rabbit aorta

PGI₂ synthesis by aortic strips obtained from thoracic aorta of rabbits fed a high cholesterol diet was examined and compared with that of control rabbits fed a normal diet. In this report, the amounts of PGI₂ produced were shown as 6-keto-PGF_1α per μg of aortic tissue DNA instead of per mg wet weight. We also investigated PGI₂ synthesis by cultured smooth muscle cells (SMC) obtained from atherosclerotic intima.Basal PGI₂ production by aortic strips from atherosclerotic rabbit aorta was significantly augmented compared with that of controls. Arachidonic acid (AA)-induced PGI₂ production by atherosclerotic aorta was also significantly higher than that of controls. PGI₂ producing capacities of intimal and medial layers, separated from atherosclerotic aorta, were examined and the intimal layer was found to elicit a significantly greater PGI₂ production than the medial layer.Furthermore, cultured intimal SMC obtained from atherosclerotic rabbit aorta produced a greater amount of PGI₂ than medial SMC from normal rabbit aorta at various cultured conditions. These results suggest that the possibility of enhanced PGI₂ production by atherosclerotic aorta may well be considered as a defence mechanism of the vessel wall against damaging stimuli.     

Effect of hypertension on fibronectin expression in the rat aorta

Interactions between extracellular fibronectin and vascular cells are thought to influence the phenotype of those cells. To determine if changes in fibronectin expression accompany the phenotypic changes of vascular tissue characteristic of experimental hypertension, steady state mRNA levels for fibronectin were determined in aortae of normotensive and hypertensive rats. A 3-6-fold increase in fibronectin mRNA was observed in aortic tissue of hypertensive rats following 3 weeks of treatment with deoxycorticosterone and salt, whereas if rats were treated only with deoxycorticosterone or salt alone, no changes occurred. The changes were reversed by normalization of blood pressure. The increases observed were localized to aorta and not to the periaortic tissue. Angiotensin II infusion using osmotic minipumps also caused an increase in fibronectin expression. Age-dependent increases in aortic fibronectin mRNA occurred in several rat strains, and the combined effects of hypertension and aging were greater than either variable alone. A clear distinction between the expression of fibronectin mRNA and that for collagen or tropoelastin were found in hypertensive and aging models. Aortic fibronectin was also increased in the hypertensive rats as determined by Western blot analysis. The findings indicate that elevation in blood pressure increases fibronectin expression in rat aorta and suggest that such changes may influence the aortic cellular responses to hypertension.     

3D geometric reconstruction of thoracic aortic aneurysms

Background  

The thoracic aortic aneurysm (TAA) is a pathology that involves an expansion of the aortic diameter in the thoracic aorta, leading to risk of rupture. Recent studies have suggested that internal wall stress, which is affected by TAA geometry and the presence or absence of thrombus, is a more reliable predictor of rupture than the maximum diameter, the current clinical criterion. Accurate reconstruction of TAA geometry is a crucial step in patient-specific stress calculations.     

Wall shear stress distribution in a model human aortic arch: assessment by an electrochemical technique

Wall shear stress (WSS) distribution in a human aortic arch model is studied using 130 cathode electrodes flush-mounted on the model walls. Flow visualizations are made in a transparent geometry model to identify the regions of fluid mechanical interests, e.g. regions of flow separation, eddy formation and flow stagnancy. The 130 electrodes are strategically positioned in the arch based on information obtained from the flow visualizations. The measured data indicate that the aortic arch may be categorized into eight regions: three along the inner wall of the arch (A,B,C); and five near the outer wall (D,E,F,G,H). (1) The regions of low WSS are distributed along the inner wall of the ascending aorta A; the inner wall of the descending aorta C; and the upstream inner wall of the innominate and the common carotid branchings F. (2) The high WSS regions are distributed along the outer wall of the arch E; and the inner wall in the arch opposite to the left subclavian branching B. (3) In certain regions, high and low WSS may be found next to each other (e.g. G and H) without a definable boundary in between; and (4) as the Reynolds number increases, the areas of low WSS decrease, while the high WSS areas increase with no obvious change in magnitude of the stress along the inner wall of the arch. At the branchings, the WSS distribution is not affected by the Reynolds number within the range of observations. The measured WSS distribution is compared with Rodkiewicz's map of early atherosclerotic lesions in the aortic arch of cholesterol fed rabbits.     

Passive elastic properties of the rat aorta

The passive anisotropic elastic properties of rat's aorta were studied in vitro by subjecting cylindrical segments of thoracic and abdominal aorta to a wide range of deformations. Using data on pressure, axial stretch, outer diameter, axial force and wall thickness, incremental moduli of elasticity in the circumferential, axial and radial directions were computed. Results indicate that while the elastic behavior of the aortic wall is globally anisotropic, there exists a state of deformation at which the vessel displays incremental isotropy. This state of deformation corresponds approximately to the loading conditions to which the aorta is exposed in situ. Values of the moduli, analyzed as a function of transmural pressure, show that the stiffness of the aortic wall is fairly constant at low pressures but raises steeply for pressures higher than physiological. For axial stretches as occurring in situ, the magnitudes of the circumferential and radial moduli do not differ significantly for the thoracic aorta; hence this vessel can be regarded as transversely isotropic over a wide range of pressures. The same observation is valid also for the abdominal aorta when pressures equal or smaller than physiological are considered. For both the thoracic and abdominal segments of the aorta, the circumferential and radial moduli are smaller than the axial modulus at low pressures, while the reverse is true for large pressures.     

Measurement of wall shear stress distal to a tri-leaflet valve in a rigid model of the aortic arch with branch flows

Flush mounted hot film anemometer probes were used to measure wall shear stress magnitudes on the inside and outside walls of a rigid model of the human aortic arch. The effects of the presence of an Ionescu-Shiley tri-leaflet bioprosthetic heart valve at the entrance of the aortic arch and the side flows through arteries located in the mid-arch region on wall shear stress magnitudes were determined. It was found that the presence of the tri-leaflet valve leads to an elevation of wall shear stress (relative to the same flow without a valve) over the entire aortic arch region by as much as 50 percent. The valve influence extended to about 180 deg from the entrance to the aorta on the inside wall and even further on the outside wall based on extrapolation of available data. Peak wall shear stress magnitudes measured on the outside wall were in the range of 1.5-4.0 N/m2 (15-40 dynes/cm2) over the length of the aortic arch and took on their highest values in the mid-arch region. Inside wall values were of comparable magnitude. It was observed that the presence of the aortic valve and side flow from the top of the aortic arch reduced wall shear stress reversal in the arch region.     

Prostacyclin-stimulating drugs: New prospects

SKF 525-A (proadifen), a well-known inhibitor of drug metabolism and cytochrome P-450 activity, stimulated the release of prostacyclin (PGI₂) from the rabbit aorta in vitro. The PGI₂-stimulating activity of SKF 525-A was characterized by specific structural requirements : activity was abolished by the deletion of the terminal propyl chain and increased by its elongation into an isobutyl chain; chlorination of the phenyl rings increased the potency. SKF 525-A increased the production of PGI₂ by cultured endothelial cells from bovine aorta and human umbilical vein, but had no effect on cultured smoooth muscle from the bovine aortic media. In human platelets, SKF 525-A inhibited prostaglandin and thromboxane production induced by A23187, thrombin and ADP. Simultaneous stimulation of endothelial PGI₂ and inhibition of platelet TxA₂ represents an original pharmacological profile : SKF 525-A might thus constitute the prototype of a new class of antiplatelet drugs.     

Medin Oligomer Membrane Pore Formation: A Potential Mechanism of Vascular Dysfunction

Medin, a 50-amino-acid cleavage product of the milk fat globule-EGF factor 8 protein, is one of the most common forms of localized amyloid found in the vasculature of individuals older than 50 years. Medin induces endothelial dysfunction and vascular inflammation, yet despite its prevalence in the human aorta and multiple arterial beds, little is known about the nature of its pathology. Medin oligomers have been implicated in the pathology of aortic aneurysm, aortic dissection, and more recently, vascular dementia. Recent in vitro biomechanical measurements found increased oligomer levels in aneurysm patients with altered aortic wall integrity. Our results suggest an oligomer-mediated toxicity mechanism for medin pathology. Using lipid bilayer electrophysiology, we show that medin oligomers induce ionic membrane permeability by pore formation. Pore activity was primarily observed for preaggregated medin species from the growth-phase and rarely for lag-phase species. Atomic force microscopy (AFM) imaging of medin aggregates at different stages of aggregation revealed the gradual formation of flat domains resembling the morphology of supported lipid bilayers. Transmission electron microscopy images showed the coexistence of compact oligomers, largely consistent with the AFM data, and larger protofibrillar structures. Circular dichroism spectroscopy revealed the presence of largely disordered species and suggested the presence of β-sheets. This observation and the significantly lower thioflavin T fluorescence emitted by medin aggregates compared to amyloid-β fibrils, along with the absence of amyloid fibers in the AFM and transmission electron microscopy images, suggest that medin aggregation into pores follows a nonamyloidogenic pathway. In silico modeling by molecular dynamics simulations provides atomic-level structural detail of medin pores with the CNpNC barrel topology and diameters comparable to values estimated from experimental pore conductances.