Macromolecular assemblies of myosin.

The self-assembly of myosin into filamentous structures is a highly cooperative and rapid process. Nevertheless, the presence of nonequivalent bonding interactions within the filament permits differential stabilization of several macromolecular assemblies of myosin under well-controlled ionic conditions in citrate/Tris buffer at pH 8.0. We have detected and characterized bipolar myosin minifilaments, myosin octamers, and tetramers by using light scattering, analytical ultracentrifugation, and viscosity techniques. These structures have molecular weights of 8.0 X 10(6), 3.9 X 10(6) g/mol, sedimentation coefficients of 32S, 22S, and 18S, and radii of gyration of 990 A, 890 A and 790, A, respectively. The similar radii of gyration indicate similar bipolar geometry for all these particles. The 32S minifilaments in 10 mM citrate/Tris buffer (pH 8.0) are the most stable species. The smaller 18S and 22S assemblies in 2 mM and 5 mM citrate/Tris, pH 8.0, are readily affected by low concentrations of KCl and fuse into the minifilament particles. The instability of the 18S and 22S forms of myosin assembly is also revealed by their titration with ATP. These structures are dissociated at lower ATP concentrations than the minifilaments and do not show the cooperative dissociation transitions characteristic of filaments and minifilaments. Sedimentation velocity analysis of the 18S and 22S species in the presence of ATP reveals the involvement of 10S myosin dimer in the dissociation of assembled myosin. The different forms of assembled myosin are discussed in the context of formation of myosin minifilaments.     

Crossbridge release and alpha-helix-coil transition in myosin and rod minifilaments

The relationship between crossbridge release and alpha-helix-coil transition in myosin has been investigated by employing synthetic myosin and rod minifilaments prepared in 10 mM-citrate/Tris buffer at pH 7.0 and 8.0. Initial sedimentation velocity and turbidity measurements have established that the minifilament structures obtained at pH 7.0 and 8.0 are relatively similar in size and homogeneity, and can be used in comparative circular dichroism studies. Chemical crosslinkings and proteolytic digestions carried out at pH 7.0 and 8.0 verify that myosin and rod minifilaments undergo the same pH-induced changes as myosin filaments, i.e. a decrease in the rate of subfragment-2 crosslinking to the filament surface, and an increase in proteolytic susceptibility of the light meromyosin-heavy meromyosin hinge at alkaline pH. These results suggest charge-induced release of the S-2 element from the myosin and rod minifilament surface. Circular dichroism measurements reveal a reduced alpha-helical content of myosin (5%) and rod minifilaments (10%) at pH 8.0 compared to the respective pH 7.0 structures. These results establish a direct link between crossbridge release and alpha-helix-coil transition in myosin.     

Ordered assemblies of myosin minifilaments

Electron microscopic observations of negatively stained myosin minifilaments in a solution containing 10 mM-citrate buffer (pH 8.0), 4 mM-MgCl2 reveal ordered assemblies. They reveal bundles of parallel minifilaments of about 330 nm in length, aggregated into periodic linear and hexagonal structures. These structures are formed by means of interaction between myosin heads, arranged at the ends of minifilament bundles. The addition of 1 mM-ATP to the above solution causes dissociation of minifilament bundles into individual minifilaments without preventing the latter from association into linear "end-to-end" assemblies. Phosphorylation of myosin light chains does not exert any noticeable effect on the structure of the ordered minifilament assemblies but significantly increases their quantity. The interaction between minifilaments observed by us should be taken into consideration in studies on the properties of myosin which make use of minifilament systems.     

Assembly of smooth muscle myosin into side-polar filaments

The in vitro assembly of myosin purified from calf aorta muscle has been studied by electron microscopy. Two types of filament are formed: short bipolar filament similar to those formed from skeletal muscle myosin, and longer "side-polar" filaments having cross bridges with a single polarity along the entire length of one side and the opposite polarity along the other side. Unlike the case with skeletal myosin filaments, antiparallel interactions between myosin molecules occur along the whole length of side-polar filaments. The side-polar structure may be related to the in vivo form of myosin in vertebrate smooth muscle.     

Structural changes in synthetic myosin minifilaments and their dissociation by adenosine triphosphate and pyrophosphate

Morphologically similar short myosin and rod filaments (minifilaments) have been prepared in 10 mM Tris--citrate buffer, pH 8.0, in the absence of other myosin or rod forms. Both minifilament systems are dissociated in the same manner in the presence of ATP or pyrophosphate. Identical binding of these ligands to myosin and rod minifilaments suggests that myosin heads play no role in substrate-induced destabilization of the minifilaments. The effects of ATP and pyrophosphate on minifilaments are similar to their dissociating effect on synthetic filaments [Harrington, W. F., & Himmelfarb, S. (1972) Biochemistry 11, 2945--2952], thus justifying their use in conformational studies in lieu of filaments. In view of their small size and homogeneity, the minifilaments constitute an appropriate material for such studies. The binding of pyrophosphate to myosin and rod minifilaments decreases their alpha-helical content, as measured by circular dichroism. No change in the secondary structure of subfragment 1 and light meromyosin is observed upon binding of pyrophosphate, but substantial changes (10%) are detected in subfragment 2. The structural changes in myosin, possibly relevant to contraction, are localized in the subfragment 2 region of the molecule. These results emphasize the importance of charge interactions in the functional behavior of thick filaments.     

Cold-sensitive regulatory mutants of simian virus 40

A preparation of short synthetic myosin filaments (minifilaments) in the absence of other myosin forms is reported. Myosin minifilaments have been prepared by dialysing myosin from vertebrate striated muscle into 10 mm-citrate/Tris buffer (pH 8.0 at 4 °C) containing no other salt. These polymers of myosin are very stable and show little tendency to aggregate or dissociate in the original solvent. Sedimentation velocity, diffusion and viscosity measurements indicate that the minifilaments are composed of 16 to 18 molecules. Examination of electron micrographs reveals that the bare central region of minifilaments extends over 1600 to 1800 Å and the entire particles are about 3000 Å long with a diameter of 80 Å across the smooth region. They have the appearance of short bipolar filaments (Huxley, 1963). In solution the minifilaments are homogeneous in terms of size distribution and exhibit normal MgATPase and CaATPase activities. When examined in the ultracentrifuge, the minifilaments sediment in the form of a hypersharp peak (or bar) with a sedimentation coefficient independent of rotor speed. The minifilaments can be dissociated by ATP, hardly by MgATP; whereas KCl (between 0.04 and 0.2 m) induces further polymerization. It is suggested that the minifilaments are an intermediate in the assembly of myosin filaments.     

Subunit exchange between smooth muscle myosin filaments

Filaments formed from phosphorylated smooth muscle myosin are stable in the presence of MgATP, whereas dephosphorylated filaments are disassembled to a mixture of folded monomers and dimers. The stability of copolymers of phosphorylated and dephosphorylated myosin was, however, unknown. Gel filtration, sedimentation velocity, and pelleting assays were used to show that MgATP could dissociate dephosphorylated myosin from copolymers containing either rod and myosin or dephosphorylated and phosphorylated myosin. Copolymers were typically formed by dialyzing monomeric mixtures into filament-forming buffer but, unexpectedly, could also be formed within minutes of mixing preformed rod and myosin minifilaments. This result suggested that molecules can rapidly and extensively exchange between filaments, presumably via the monomeric pool of myosin in equilibrium with polymer. An exchange of molecules between filaments was demonstrated directly by electron microscopy using gold-labeled streptavidin or antibody to detect the exchanged species. By this approach it was shown that smooth muscle myosin filaments, like other macromolecular assemblies, are dynamic structures that can readily alter their composition in response to changing solvent conditions. Moreover, because folded monomeric myosin is unable to polymerize, these experiments suggest a mechanism for the disassembly of the filament by MgATP.     

Myosin filament structure in vertebrate smooth muscle

The in vivo structure of the myosin filaments in vertebrate smooth muscle is unknown. Evidence from purified smooth muscle myosin and from some studies of intact smooth muscle suggests that they may have a nonhelical, side-polar arrangement of crossbridges. However, the bipolar, helical structure characteristic of myosin filaments in striated muscle has not been disproved for smooth muscle. We have used EM to investigate this question in a functionally diverse group of smooth muscles (from the vascular, gastrointestinal, reproductive, and visual systems) from mammalian, amphibian, and avian species. Intact muscle under physiological conditions, rapidly frozen and then freeze substituted, shows many myosin filaments with a square backbone in transverse profile. Transverse sections of fixed, chemically skinned muscles also show square backbones and, in addition, reveal projections (crossbridges) on only two opposite sides of the square. Filaments gently isolated from skinned smooth muscles and observed by negative staining show crossbridges with a 14.5-nm repeat projecting in opposite directions on opposite sides of the filament. Such filaments subjected to low ionic strength conditions show bare filament ends and an antiparallel arrangement of myosin tails along the length of the filament. All of these observations are consistent with a side-polar structure and argue against a bipolar, helical crossbridge arrangement. We conclude that myosin filaments in all smooth muscles, regardless of function, are likely to be side-polar. Such a structure could be an important factor in the ability of smooth muscles to contract by large amounts.     

Actin-facilitated assembly of smooth muscle myosin induces formation of actomyosin fibrils

To identify regulatory mechanisms potentially involved in formation of actomyosin structures in smooth muscle cells, the influence of F-actin on smooth muscle myosin assembly was examined. In physiologically relevant buffers, AMPPNP binding to myosin caused transition to the soluble 10S myosin conformation due to trapping of nucleotide at the active sites. The resulting 10S myosin-AMPPNP complex was highly stable and thick filament assembly was suppressed. However, upon addition to F-actin, myosin readily assembled to form thick filaments. Furthermore, myosin assembly caused rearrangement of actin filament networks into actomyosin fibers composed of coaligned F-actin and myosin thick filaments. Severin-induced fragmentation of actin in actomyosin fibers resulted in immediate disassembly of myosin thick filaments, demonstrating that actin filaments were indispensable for mediating myosin assembly in the presence of AMPPNP. Actomyosin fibers also formed after addition of F-actin to nonphosphorylated 10S myosin monomers containing the products of ATP hydrolysis trapped at the active site. The resulting fibers were rapidly disassembled after addition of millimolar MgATP and consequent transition of myosin to the soluble 10S state. However, reassembly of myosin filaments in the presence of MgATP and F-actin could be induced by phosphorylation of myosin P-light chains, causing regeneration of actomyosin fiber bundles. The results indicate that actomyosin fibers can be spontaneously formed by F-actin-mediated assembly of smooth muscle myosin. Moreover, induction of actomyosin fibers by myosin light chain phosphorylation in the presence of actin filament networks provides a plausible hypothesis for contractile fiber assembly in situ.     

Effect of phosphorylation of myosin light chains on the interaction of myosin minifilaments with F-actin

The effect of phosphorylation of light chains-2 (LC2) of rabbit skeletal muscle myosin on the interaction of myosin minifilaments with F-actin as well as on the actin-stimulated Mg2+-ATPase of minifilaments was studied. It was shown that in the absence of KCl the degree of F-actin-induced stimulation of myosin minifilament Mg2+-ATPase with phosphorylated LC2 exceeds 2-4-fold that with unphosphorylated LC2. Phosphorylation of LC2 considerably increases the rate of actin-stimulated Mg2+-ATPase reaction of myosin minifilaments but exerts only a very weak influence on the affinity of minifilaments for F-actin. After addition of KCl the differences in the actin-stimulated Mg2+-ATPase activity disappear in a great degree; in the presence of 50 mM KCl they do not exceed 50%. It was assumed that the observed specific influence of LC2 phosphorylation on the kinetic parameters of actin-stimulated Mg2+-ATPase reaction of myosin minifilaments is due to unique properties of the minifilaments (e.g., their ability to ordered self-assembly as a result of interaction between the heads of myosin molecules) which reflect their structural peculiarities.     

The effect of heavy chain phosphorylation and solution conditions on the assembly of Acanthamoeba myosin-II

At low ionic strength, Acanthamoeba myosin-II polymerizes into bipolar minifilaments, consisting of eight molecules, that scatter about three times as much light as monomers. With this light scattering assay, we show that the critical concentration for assembly in 50-mM KCl is less than 5 nM. Phosphorylation of the myosin heavy chain over the range of 0.7 to 3.7 P per molecule has no effect on its KCl dependent assembly properties: the structure of the filaments, the extent of assembly, and the critical concentration for assembly are the same. Sucrose at a concentration above a few percent inhibits polymerization. Millimolar concentrations of MgCl2 induce the lateral aggregation of fully formed minifilaments into thick filaments. Compared with dephosphorylated minifilaments, minifilaments of phosphorylated myosin have a lower tendency to aggregate laterally and require higher concentrations of MgCl2 for maximal light scattering. Acidic pH also induces lateral aggregation, whereas basic pH leads to depolymerization of the myosin- II minifilaments. Under polymerizing conditions, millimolar concentrations of ATP only slightly decrease the light scattering of either phosphorylated or dephosphorylated myosin-II. Barring further modulation of assembly by unknown proteins, both phosphorylated and dephosphorylated myosin-II are expected to be in the form of minifilaments under the ionic conditions existing within Acanthamoeba.     

Myosin II filament assemblies in the active lamella of fibroblasts: their morphogenesis and role in the formation of actin filament bundles

The morphogenesis of myosin II structures in active lamella undergoing net protrusion was analyzed by correlative fluorescence and electron microscopy. In rat embryo fibroblasts (REF 52) microinjected with tetramethylrhodamine-myosin II, nascent myosin spots formed close to the active edge during periods of retraction and then elongated into wavy ribbons of uniform width. The spots and ribbons initially behaved as distinct structural entities but subsequently aligned with each other in a sarcomeric-like pattern. Electron microscopy established that the spots and ribbons consisted of bipolar minifilaments associated with each other at their head-containing ends and arranged in a single row in an "open" zig-zag conformation or as a "closed" parallel stack. Ribbons also contacted each other in a nonsarcomeric, network-like arrangement as described previously (Verkhovsky and Borisy, 1993. J. Cell Biol. 123:637-652). Myosin ribbons were particularly pronounced in REF 52 cells, but small ribbons and networks were found also in a range of other mammalian cells. At the edge of the cell, individual spots and open ribbons were associated with relatively disordered actin filaments. Further from the edge, myosin filament alignment increased in parallel with the development of actin bundles. In actin bundles, the actin cross-linking protein, alpha-actinin, was excluded from sites of myosin localization but concentrated in paired sites flanking each myosin ribbon, suggesting that myosin filament association may initiate a pathway for the formation of actin filament bundles. We propose that zig-zag assemblies of myosin II filaments induce the formation of actin bundles by pulling on an actin filament network and that co-alignment of actin and myosin filaments proceeds via folding of myosin II filament assemblies in an accordion-like fashion.     

ATP-linked monomer-polymer equilibrium of smooth muscle myosin: the free folded monomer traps ADP.Pi.

In vitro and at physiological ionic strength, unphosphorylated smooth muscle myosin filaments dissolve on addition of ATP, forming folded (10S) myosin monomers. By following the fate of ATP and the time course of filament disassembly we have established details of the mechanism of this process. Myosin filaments first bind and hydrolyse 2.0 mol/mol of ATP before significant filament dissolution occurs. Following dissolution, the hydrolysis products ADP.Pi are retained on the heads of the folded myosin monomers, and are released so slowly (half time approximately 100 min at 100 mM KCl) as to be effectively trapped. The straight (6S) conformation of myosin, stable at greater than 225 mM KCl, did not exhibit this product trapping, and neither did myosin filaments held under conditions which disfavour ATP-induced disassembly. The implications of these results for filament stability in vivo are discussed in terms of a simple, testable model for smooth muscle myosin self-assembly.     

Control of filament length by the regulatory light chains in skeletal and cardiac myosins

The possible role of the regulatory light chains (LC2) in in vitro assembly of rabbit skeletal and dog cardiac myosins was examined by formation of minifilaments and synthetic thick filaments. After LC2 was removed, the resulting myosin preparations exhibited little aggregation in 0.5 M KCl and 0.05 M potassium phosphate (pH 6.5). Minifilaments migrated as a single, hypersharp peak during sedimentation velocity, but electron microscopic analysis revealed a more destabilized structure for LC2-deficient minifilaments. Thick filaments were formed in buffers containing 0.15 M KCl and the following: 20 mM imidazole; 20 mM imidazole, 5 mM ATP; or 20 mM imidazole, 5 mM ATP, and 5 mM MgCl2, all at pH 7.0. Skeletal and cardiac myosin filaments formed in imidazole buffer alone were bipolar, tapered at both ends, and about 1.6 micron long. Removal of LC2 resulted in the formation of shorter thick filaments (1.2 micron long). This effect could be reversed by reassociation with LC2. Inclusion of ATP in the buffer disrupted the filament structure, resulting in irregular, short filaments (less than 0.6 micron); addition of both ATP and MgCl2 largely reversed the effects of ATP alone. In cardiac myosin filaments, the bare zone diameter increased from 16 nm as measured in control and LC2-recombined samples to 20 nm in LC2-deficient myosin assemblies. These results implicate LC2 in an active role in controlling synthetic thick filament length in both skeletal and cardiac muscles.     

Mechanism of smooth muscle myosin phosphorylation

In vertebrate smooth muscles, phosphorylation of the regulatory light chain appears to be necessary for actin activation of the Mg-ATPase activity and for the in vitro assembly of myosin into filaments. From a correlation between the degree of phosphorylation and enzymatic activity, it was suggested that both myosin heads must be phosphorylated before either head could be activated by actin, and that phosphorylation of filamentous myosin occurred in a negatively cooperative manner (Persechini, A., and Hartshorne, D. J. (1981) Science 213, 1383-1385; Ikebe, M., Ogihara, S., and Tonomura, Y. (1982) J. Biochem. (Tokyo) 91, 1809-1812; Sellers, J. R., Chock, P. B., and Adelstein, R. S. (1983) J. Biol. Chem. 258, 14181-14188). Here we have determined the mechanism of phosphorylation by separating dephosphorylated and phosphorylated myosin species based on their different structural properties in the minifilament buffer system (5 mM citrate, 22 mM Tris). Fully phosphorylated myosin remained assembled as minifilaments in 1 mM Mg-ATP, but dephosphorylated myosin dissociated to a mixture of folded monomers and dimers. Gel filtration was used to separate these two structures. At intermediate levels of phosphorylation, the relative amount of myosin that formed minifilament and dimer and the degree of phosphorylation of the separated species relative to the initial level of phosphorylation was measured. From these data, it was possible to deduce that singly and doubly phosphorylated myosin remained assembled in the presence of nucleotide. Myosin molecules with 0, 1, or 2 heads phosphorylated could also be separated by nondenaturing gel electrophoresis. The amount of myosin which formed each species was quantitated as a function of phosphorylation. Results from the combined approaches are consistent with a model in which light chain kinase randomly phosphorylates myosin, independent of the state of aggregation of the myosin.     

The mechanism of assembly of Acanthamoeba myosin-II minifilaments: minifilaments assemble by three successive dimerization steps

We used 90 degrees light scattering, analytical ultracentrifugation, and electron microscopy to deduce that Acanthamoeba myosin-II minifilaments, composed of eight molecules each, assemble by a novel mechanism consisting of three successive dimerization steps rather than by the addition of monomers or parallel dimers to a nucleus. Above 200 mM KCl, Acanthamoeba myosin-II is monomeric. At low ionic strength (less than 100 mM KCl), myosin-II polymerizes into bipolar minifilaments. Between 100 and 200 mM KCl, plots of light scattering vs. myosin concentration all extrapolate to the origin but have slopes which decrease with increasing KCl. This indicates that structures intermediate in size between monomers and full length minifilaments are formed, and that the critical concentrations for assembly of these structures is very low. Analytical ultracentrifugation has confirmed that intermediate structures exist at these salt concentrations, and that they are in rapid equilibrium with each other. We believe these structures represent assembly intermediates and have used equilibrium analytical ultracentrifugation and electron microscopy to identify them. Polymerization begins with the formation of antiparallel dimers, with the two tails overlapping by approximately 15 nm. Two antiparallel dimers then associated with a 15-nm stagger to form an antiparallel tetramer. Finally, two tetramers associate with a 30-nm stagger to form the completed minifilament. At very low ionic strengths, the last step in the assembly mechanism is largely reversed and antiparallel tetramers are the predominant species. Alkaline pH, which can also induce minifilament disassembly, produces the same assembly intermediates as are found for salt induced disassembly.     

Physical integrity of smooth muscle myosin filaments is enhanced by phosphorylation of the regulatory myosin light chain.

BACKGROUND AND AIMS: Smooth muscle myosin monomers self-assemble in solution to form filaments. Phosphorylation of the 20-kD regulatory myosin light chain (MLC20) enhances filament formation. It is not known whether the phosphorylated and non-phosphorylated filaments possess the same structural integrity. METHODS: We purified myosin from bovine trachealis to form filaments, in ATP-containing zero-calcium solution during a slow dialysis that gradually reduced the ionic strength. Sufficient myosin light chain kinase and phosphatase, as well as calmodulin, were retained after the myosin purification and this enabled phosphorylation of MLC20 within 20-40s after addition of calcium to the filament suspension. The phosphorylated and non-phosphorylated filaments were then partially disassembled by ultrasonification. The extent of filament disintegration was visualized and quantified by atomic force microscopy. RESULTS: MLC20 phosphorylation reduced the diameter of the filaments and rendered the filaments more resistant to ultrasonic agitation. Electron microscopy revealed a similar reduction in filament diameter in intact smooth muscle when the cells were activated. CONCLUSION: Modification of the structural and physical properties of myosin filaments by MLC20 phosphorylation may be a key regulation step in smooth muscle where formation and dissolution of the filaments are required in the cells' adaptation to different cell length.     

Growth cones contain myosin II bipolar filament arrays

Nonmuscle myosin II is among the most abundant forms of myosin in nerve growth cones. At least two isoforms of myosin II (A and B) that have overlapping but distinct distributions are found in growth cones. It appears that both myosin IIA and IIB may be necessary for normal nerve outgrowth and motility, but the molecular interactions responsible for their activity remain unclear. For instance, it is unknown if these myosin II isoforms produce bipolar "minifilaments" in growth cones similar to those observed in other nonmuscle cells. To determine if minifilaments are present in growth cones, we modified the electron microscopy preparative procedures used to detect minifilaments in other cell types. We found structures that appeared very similar to bipolar minifilaments found in noneuronal cells. They also labeled with antibodies to either myosin IIA or IIB. Thus, the activity of myosin II in growth cones is likely to be similar to that in other nonmuscle cells. Bipolar filaments interacting with oppositely oriented actin filaments will produce localized contractions or exert tension on actin networks. This activity will be responsible for the myosin II dependent motility in growth cones.     

Human platelet myosin. II. In vitro assembly and structure of myosin filaments

We have used electron microscopy and solubility measurements to investigate the assembly and structure of purified human platelet myosin and myosin rod into filaments. In buffers with ionic strengths of less than 0.3 M, platelet myosin forms filaments which are remarkable for their small size, being only 320 nm long and 10-11 nm wide in the center of the bare zone. The dimensions of these filaments are not affected greatly by variation of the pH between 7 and 8, variation of the ionic strength between 0.05 and 0.2 M, the presence or absence of 1 mM Mg++ or ATP, or variation of the myosin concentration between 0.05 and 0.7 mg/ml. In 1 mM Ca++ and at pH 6.5 the filaments grow slightly larger. More than 90% of purified platelet myosin molecules assemble into filaments in 0.1 M KC1 at pH 7. Purified preparations of the tail fragment of platelet myosin also form filaments. These filaments are slightly larger than myosin filaments formed under the same conditions, indicating that the size of the myosin filaments may be influenced by some interaction between the head and tail portions of myosin molecules. Calculations based on the size and shape of the myosin filaments, the dimensions of the myosin molecule and analysis of the bare zone reveal that the synthetic platelet myosin filaments consists of 28 myosin molecules arranged in a bipolar array with the heads of two myosin molecules projecting from the backbone of the filament at 14-15 nm intervals. The heads appear to be loosely attached to the backbone by a flexible portion of the myosin tail. Given the concentration of myosin in platelets and the number of myosin molecules per filament, very few of these thin myosin filaments should be present in a thin section of a platelet, even if all of the myosin molecules are aggregated into filaments.     

Smitin, a novel smooth muscle titin-like protein, interacts with myosin filaments in vivo and in vitro.

Smooth muscle cells use an actin-myosin II-based contractile apparatus to produce force for a variety of physiological functions, including blood pressure regulation and gut peristalsis. The organization of the smooth muscle contractile apparatus resembles that of striated skeletal and cardiac muscle, but remains much more poorly understood. We have found that avian vascular and visceral smooth muscles contain a novel, megadalton protein, smitin, that is similar to striated muscle titin in molecular morphology, localization in a contractile apparatus, and ability to interact with myosin filaments. Smitin, like titin, is a long fibrous molecule with a globular domain on one end. Specific reactivities of an anti-smitin polyclonal antibody and an anti-titin monoclonal antibody suggest that smitin and titin are distinct proteins rather than differentially spliced isoforms encoded by the same gene. Smitin immunofluorescently colocalizes with myosin in chicken gizzard smooth muscle, and interacts with two configurations of smooth muscle myosin filaments in vitro. In physiological ionic strength conditions, smitin and smooth muscle myosin coassemble into irregular aggregates containing large sidepolar myosin filaments. In low ionic strength conditions, smitin and smooth muscle myosin form highly ordered structures containing linear and polygonal end-to-end and side-by-side arrays of small bipolar myosin filaments. We have used immunogold localization and sucrose density gradient cosedimentation analyses to confirm association of smitin with both the sidepolar and bipolar smooth muscle myosin filaments. These findings suggest that the titin-like protein smitin may play a central role in organizing myosin filaments in the contractile apparatus and perhaps in other structures in smooth muscle cells.