抗白念珠菌生物被膜药物的研究进展

白念珠菌是临床最常见的一种能产生生物被膜的致病真菌,所产生的生物被膜是导致高度耐药性和临床白念珠菌反复感染的直接原因.近年来,科学家们开始关注天然产物的抗生物被膜活性,以及不同药物联合应用的抗生物被膜效果,该文对抗白念珠菌生物被膜药物的研究进展作一综述.     

大蒜素对白色念珠菌生物被膜形成的作用

生物被膜的形成是白色念珠菌产生耐药性的重要原因之一。本研究首先构建白色念珠菌体外生物被膜模型,通过倒置显微镜和甲基四氮盐（XTT）法检测大蒜素对白色念珠菌生物被膜形成的影响,同时采用实时荧光定量PCR法（qRT-PCR）对白色念珠菌生物被膜相关基因ALS1、ALS3、HWP1、MP65、SUN41的表达水平进行检测。结果显示,当大蒜素浓度≥12.5μg/mL时,白色念珠菌生物被膜的生长被抑制,并且在生物被膜形成的早期,大蒜素干预能有效抑制其形成;大蒜素能下调白色念珠菌生物被膜相关基因ALS1、ALS3、HWP1、MP65、SUN41的表达水平。研究结果提示,大蒜素可有效抑制体外白色念珠菌生物被膜的形成,可能与其下调生物被膜相关基因的表达有关。     

Candida albicans biofilm formation on peptide functionalized polydimethylsiloxane

In order to prevent biofilm formation by Candida albicans, several cationic peptides were covalently bound to polydimethylsiloxane (PDMS). The salivary peptide histatin 5 and two synthetic variants (Dhvar 4 and Dhvar 5) were used to prepare peptide functionalized PDMS using 4-azido-2,3,5,6-tetrafluoro-benzoic acid (AFB) as an interlinkage molecule. In addition, polylysine-, polyarginine-, and polyhistidine-PDMS surfaces were prepared. Dhvar 4 functionalized PDMS yielded the highest reduction of the number of C. albicans biofilm cells in the Modified Robbins Device. Amino acid analysis demonstrated that the amount of peptide immobilized on the modified disks was in the nanomole range. Poly-d-lysine PDMS, in particular the homopeptides with low molecular weight (2500 and 9600) showed the highest activity against C. albicans biofilms, with reductions of 93% and 91%, respectively. The results indicate that the reductions are peptide dependent.     

白念珠菌生物被膜形成的遗传调控机制

白念珠菌是人体重要的条件性致病真菌。形态的多样性和可塑性是白念珠菌典型的生物学特征,这与它的致病性、宿主适应能力以及有性生殖过程密切相关。白念珠菌生物被膜(Biofilm)是由不同形态细胞(包括酵母型、菌丝和假菌丝)以及胞外基质组成的致密结构,也是毒性和耐药性形成的重要因子。生物被膜对抗真菌药物、宿主免疫系统和环境胁迫因子等都表现出较强的抵抗力和耐受性,是临床上病原真菌感染防治的重大挑战。随着基因表达谱和遗传操作技术的发展,白念珠菌生物被膜的形成及其耐药性的获得所依赖的遗传调控通路和分子调控机制越来越清楚。主要包括MAPK和cAMP介导的信号途径以及Bcr1和Tec1等因子介导的转录调控。此外,白念珠菌生物被膜的形成与形态转换和有性生殖之间存在密切的联系。文中综述了白念珠菌生物被膜形成的遗传调控机制,重点介绍了细胞壁相关蛋白、转录因子和交配型对该过程的调控以及生物被膜的耐药机制。     

Relationship between thigmotropism and Candida biofilm formation in vitro

The biofilm formation of the oral fungal pathogen Candida on denture acrylic strips coated with saliva or serum was examined in relation to the ability to induce hyphae by thigmotropic reaction, using C. albicans (4 isolates), C. glabrata (3 isolates) and C. tropicalis (3 isolates). Both the degree of biofilm formation and the amount of hyphae exhibiting thigmotropism varied depending upon both the species and strains of Candida. Although there was no significant correlation between the amount of hyphae induced by thigmotropic reaction of fungal isolates and biofilm formation on uncoated control specimens (r = 0.577; p < 0.05), the ability of hyphae induced by thigmotropic reaction significantly correlated with the amount of both saliva- and serum-admixed biofilms (r = 0.734; p < 0.05 and r = 0.793; p < 0.01, respectively). Taken together our in vitro data suggested that the hyphal induction by thigmotropic reaction is of importance in candidal biofilm formation on saliva- or serum-coated acrylic surfaces. This revised version was published online in August 2006 with corrections to the Cover Date.     

Impact of oxidative and osmotic stresses on Candida albicans biofilm formation

Candida albicans possesses an ability to grow under different host-driven stress conditions by developing robust protective mechanisms. In this investigation the focus was on the impact of osmotic (2M NaCl) and oxidative (5 mM H₂O₂) stress conditions during C. albicans biofilm formation. Oxidative stress enhanced extracellular DNA secretion into the biofilm matrix, increased the chitin level, and reduced virulence factors, namely phospholipase and proteinase activity, while osmotic stress mainly increased extracellular proteinase and decreased phospholipase activity. Fourier transform infrared and nuclear magnetic resonance spectroscopy analysis of mannan isolated from the C. albicans biofilm cell wall revealed a decrease in mannan content and reduced β-linked mannose moieties under stress conditions. The results demonstrate that C. albicans adapts to oxidative and osmotic stress conditions by inducing biofilm formation with a rich exopolymeric matrix, modulating virulence factors as well as the cell wall composition for its survival in different host niches.     

Efficacy of surface-generated nitric oxide against Candida albicans adhesion and biofilm formation

This report details the efficacy of nitric oxide (NO)-releasing xerogel surfaces composed of N-(6-aminohexyl)aminopropyl trimethoxysilane (AHAP3) and isobutyltrimethoxysilane (BTMOS) against Candida albicans adhesion, viability, and biofilm formation. A parallel plate flow cell assay was used to examine the effect of NO on planktonic fungal cells. Nitric oxide fluxes as low as 14 pmol cm^?2 s^?1 were sufficient to reduce fungal adhesion by ～49% over the controls after 90 min. By utilizing a fluorescence live/dead assay and replicate plating, NO flux was determined to reduce fungal viability in a dose-dependent manner. The formation of C. albicans biofilms on NO-releasing xerogel-coated silicon rubber (SiR) coupons was impeded when compared to control (non-NO-releasing) and bare SiR surfaces. The synergistic efficacy of NO and silver sulfadiazine against adhered fungal cells and biofilms is reported with increased killing and biofilm inhibition over NO alone.     

Optimization of Salmonella Typhi biofilm assay on polypropylene microtiter plates using response surface methodology

The objective of this study was to develop an optimized assay for Salmonella Typhi biofilm that mimics the environment of the gallbladder as an experimental model for chronic typhoid fever. Multi-factorial assays are difficult to optimize using traditional one-factor-at-a-time optimization methods. Response surface methodology (RSM) was used to optimize six key variables involved in S. Typhi biofilm formation on cholesterol-coated polypropylene 96-well microtiter plates. The results showed that bile (1.22%), glucose (2%), cholesterol (0.05%) and potassium chloride (0.25%) were critical factors affecting the amount of biofilm produced, but agitation (275 rpm) and sodium chloride (0.5%) had antagonistic effects on each other. Under these optimum conditions the maximum OD reading for biofilm formation was 3.4 (λ_600 nm), and the coefficients of variation for intra-plate and inter-plate assays were 3% (n?=?20) and 5% (n?=?8), respectively. These results showed that RSM is an effective approach for biofilm assay optimization.     

Statistical optimization of production conditions of alkaline pectin lyase from Bacillus cereus using response surface methodology

Alkaline pectin lyase finds applications in the degumming and retting of plant fibres, textile industry and pectic wastewater treatment where it degrades highly methylesterified pectin without prior action of any other pectinase. Response surface methodology (RSM) has been frequently utilized for the optimization of production process of industrially important enzymes from microbes. In the present work, fermentation conditions for the production of pectin lyase from Bacillus cereus were optimized using the factorial and central composite design of RSM. The cubic order polynomial regression model was found to be adequate and significant with a determination coefficient R² of 0.9505 (p?相似文献   

The antagonistic effect of Saccharomyces boulardii on Candida albicans filamentation, adhesion and biofilm formation

The dimorphic fungus Candida albicans is a member of the normal flora residing in the intestinal tract of humans. In spite of this, under certain conditions it can induce both superficial and serious systemic diseases, as well as be the cause of gastrointestinal infections. Saccharomyces boulardii is a yeast strain that has been shown to have applications in the prevention and treatment of intestinal infections caused by bacterial pathogens. The purpose of this study was to determine whether S. boulardii affects the virulence factors of C. albicans . We demonstrate the inhibitory effect of live S. boulardii cells on the filamentation (hyphae and pseudohyphae formation) of C. albicans SC5314 strain proportional to the amount of S. boulardii added. An extract from S. boulardii culture has a similar effect. Live S. boulardii and the extract from S. boulardii culture filtrate diminish C. albicans adhesion to and subsequent biofilm formation on polystyrene surfaces under both aerobic and microaerophilic conditions. This effect is very strong and requires lower doses of S. boulardii cells or concentrations of the extract than serum-induced filamentation tests. Saccharomyces boulardii has a strong negative effect on very important virulence factors of C. albicans , i.e. the ability to form filaments and to adhere and form biofilms on plastic surfaces.     

Candida albicans enhances initial biofilm growth of Cutibacterium acnes under aerobic conditions

Candida albicans and Cutibacterium acnes are opportunistic pathogens that co-colonize the human body. They are involved in biofilm-related infections of implanted medical devices. The objective of this study was to evaluate the ability of these species to interact and form polymicrobial biofilms. SEM imaging and adhesion assays showed that C. acnes adhesion to C. albicans did not have a preference for a specific morphological state of C. albicans; bacteria adhered to both hyphal and yeast forms of C. albicans. C. albicans did not influence growth of C. acnes under anaerobic growth conditions, however under aerobic growth condition, C. albicans enhanced early C. acnes biofilm formation. This favorable impact of C. albicans was not mediated by secreted compounds accumulating in the medium, but required the presence of metabolically active C. albicans. The ability of these microorganisms to interact together could modulate the physiopathology of infections.     

Evaluation of Candida albicans adhesion and biofilm formation on a denture base acrylic resin containing silver nanoparticles

Aim: This study firstly evaluated the activity of a silver nanoparticle (AgNPs) solution against Candida albicans and then the effect of incorporation of AgNPs into a denture base acrylic resin on the material’s hydrophobicity, C. albicans adhesion and biofilm formation. Methods and Results: The AgNPs solution was synthesized by chemical reduction and characterized. Minimum inhibitory (MIC) and minimum fungicidal (MFC) concentrations for planktonic cells and sessile cells (MFCs) of the AgNPs solution against C. albicans were determined. Specimens (n = 360) of silver‐incorporated acrylic resin at concentrations of 1000, 750, 500, 250 and 30 ppm were also prepared and stored in PBS for 0, 7, 90 and 180 days. Control was acrylic resin without AgNPs (0 ppm). After the storage periods, contact angles were measured and the specimens were used for C. albicans adherence (37°C; 90 min; n = 9) and biofilm formation (37°C; 48 h; n = 9) by XTT reduction assay. MIC, MFC and MFCs values were 3·98, 15·63 and 1000 ppm, respectively. Incorporation of AgNPs reduced the hydrophobicity of the resin. No effect on adherence and biofilm formation was observed. At 90 and 180 days of storage, there was significant increase in adherence and biofilm formation. Conclusions: Although the AgNPs solution had antifungal activity, no effect on C. albicans adherence and biofilm formation was observed after its incorporation into a denture base resin. Significance and Impact of the Study: The synthesized AgNPs solution is a promising antifungal agent, warranting investigations of more efficient methods of incorporation into denture base resins.     

Response surface methodology for optimization of medium components in submerged culture of Aspergillus flavus for enhanced heparinase production

Aims: Aim of the study was to develop a medium for optimal heparinase production with a strain of Aspergillus flavus (MTCC‐8654) by using a multidimensional statistical approach. Methods and Results: Statistical optimization of intracellular heparinase production by A. flavus, a new isolate, was investigated. Plackett–Burman design was used to evaluate the affect of medium constituents on heparinase yield. The experimental results showed that the production of heparinase was dependent upon heparin, the inducer; chitin, structurally similar to heparin and NH₄NO_3, the nitrogen source. A central composite design was applied to derive a statistical model for optimizing the composition of the fermentation medium for the production of heparinase enzyme. The optimum fermentation medium consisted of (g l^?1) Mannitol, 8·0; NH₄NO₃, 2·5; K₂HPO₄, 2·5; Na₂HPO₄, 2·5; MgSO₄.7H₂O, 0·5; Chitin, 17·1; Heparin, 0·6; trace salt solution (NaMoO₄.2H₂O, CoCl₂.6H₂O, CuSO₄.5H₂O, FeSO₄.7H₂O, CaCl₂), 10^?4 mol l^?1. Conclusions: A 2·37‐fold increase in heparinase production was achieved in economic and effective manner by the application of statistical designs in medium optimization. Significance and Impact of the Study: Heparinase production was doubled by statistical optimization in a cost‐effective manner. This heparinase can find application in pharmaceutical industry and for the generation of low‐molecular‐weight heparins, active as antithrombotic and antitumour agents.     

Effect of farnesol on Candida dubliniensis biofilm formation and fluconazole resistance

Candida dubliniensis and Candida albicans are dimorphic fungal species with a number of pathogenic capabilities, including biofilm formation, systemic infection and development of fluconazole resistance. In this study, the ability of farnesol to disrupt these virulence capabilities was investigated. Biofilm assessment and susceptibility studies indicated antifungal and antibiofilm properties for farnesol on both species with a disruptive effect on the cell membrane. Synergy testing of farnesol and fluconazole in resistant strains resulted in reversal of fluconazole resistance, indicating a potential application for farnesol as an adjuvant therapeutic agent.     

CRK1基因缺失对白念珠菌形态、黏附、生物被膜的影响

目的 研究CRK1基因缺失对白念珠菌形态、黏附、生物被膜的影响.方法 显微镜下观察,计算菌丝形成率,比较CRK1基因缺失菌（Δcrk1菌）及标准菌SC5314形成菌丝的能力;建立肠黏膜模型,计算黏附率,评价CRK1基因缺失对白念珠菌黏附的影响;MTT法及结晶紫法（CV）评价CRK1基因缺失对白念珠菌生物被膜形成的影响.结果 与SC5314相比,Δcrk1菌分别在10％胎牛血清和RPMI-1640培养条件下形成菌丝能力均较弱,两者之间有统计学差异;Δcrk1菌在60、90、120 min时对肠黏膜的黏附数明显少于标准菌SC5314,两者之间有统计学差异;通过MTT法、结晶紫法两种方法证实了,在经48 h培养后,Δcrk1菌与其标准菌SC5314相比,形成生物膜的能力弱,两者之间差异有统计学差异.结论 CRK 1基因缺失影响白念珠菌菌丝二态性的转化,进而影响黏附力和生物被膜的形成.     

Proteomics for the analysis of the Candida albicans biofilm lifestyle

Candida albicans is an opportunistic pathogenic fungus capable of causing infections in immunocompromised patients. Candidiasis is often associated with the formation of biofilms on the surface of inert or biological materials. Biofilms are structured microbial communities attached to a surface and encased within a matrix of exopolymeric substance (EPS). At present, very little is known about the changes in protein profiles that occur during the transition from the planktonic to the biofilm mode of growth. Here, we report the use of proteomics for the comparative analysis of subcellular fractions obtained from C. albicans biofilm and planktonic cultures, including cell surface-associated proteins and secreted components present in liquid culture supernatants (for planktonic cultures) and EPS (for biofilms). The analysis revealed a high degree of similarity between the protein profiles associated with the planktonic and biofilm extracts, and led to the identification of several differentially expressed protein spots. Among the differentially expressed proteins, there was a preponderance of metabolic enzymes that have been described as cell surface proteins and immunodominant antigens. Proteins found in the biofilm matrix included a few predicted to form part of the secretome, and also many secretion-signal-less proteins. These observations contribute to our understanding of the C. albicans biofilm lifestyle.     

A subpopulation of Candida albicans and Candida tropicalis biofilm cells are highly tolerant to chelating agents

Many Candida spp. produce surface-adherent biofilm populations that are resistant to antifungal compounds and other environmental stresses. Recently, certain chelating agents have been recognized as having strong antimicrobial activity against biofilms of Candida species. This study investigated and characterized the concentration- and time-dependent killing of Candida biofilms by the chelators tetrasodium EDTA and sodium diethyldithiocarbamate. Here, Candida albicans and Candida tropicalis biofilms were cultivated in the Calgary Biofilm Device and then exposed to gradient arrays of these agents. Population survival was evaluated by viable cell counting and by confocal laser scanning microscopy (CLSM) in conjunction with fluorescent viability staining. At concentrations of > or =2 mM, both EDTA and diethyldithiocarbamate killed c. 90-99.5% of the biofilm cell populations. Notably, a small fraction (c. 0.5-10%) of biofilm cells were able to withstand the highest concentrations of these antifungals that were tested (16 and 32 mM for EDTA and diethyldithiocarbamate, respectively). Interestingly, CLSM revealed that these surviving cells were irregularly distributed throughout the biofilm community. These data suggest that the use of chelating agents against biofilms of Candida spp. may be limited by the refractory nature of a variant cell subpopulation in the surface-adherent community.     

荧光定量PCR检测不同状态下白念珠菌CPH1、EFG1基因的表达

目的 检测转录因子CPH1和EFG1基因在游离态及生物膜态呼吸道白念珠菌临床分离株的表达差异,探讨其在生物膜形成过程中的作用.方法 选取10株白念珠菌临床分离株,分别提取游离态及生物膜态白念珠菌总RNA,用荧光定量PCR的方法测定两种状态下CPH1和EFG1基因的表达,用△△Ct的方法计算其相对表达量.结果 白念珠菌生物膜态转录因子EFG1的表达是游离态表达水平的1.42 ～7.14倍,差异有显著意义(P＜0.05),而转录因子CPH1的表达有8株菌生物膜态较游离态增高,1株降低,1株无明显变化,差异无显著意义(P＞0.05).结论 白念珠临床株转录因子CPH1和EFG1参与生物膜形成的调控,并需在体内实验中进一步研究.     

Association of the hypha‐related protein Pra1 and zinc transporter Zrt1 with biofilm formation by the pathogenic yeast Candida albicans

Bloodstream infection by the pathogenic fungus Candida albicans is a major health problem. Candidemia is often associated with medical devices, which can act as substrates for biofilm development. Biofilm‐related infections are relatively difficult to treat because of their resistance to antimicrobial agents. It is therefore important to explore the mechanisms of biofilm formation. Dimorphism is a major contributor to biofilm formation in C. albicans. To determine whether the hypha‐related proteins Pra1 (pH‐regulated antigen) and Zrt1 (zinc transporter) are responsible for biofilm formation, the ability of pra1 and zrt1 deletion mutants to form biofilms was investigated. Biofilm formation by both deletion mutants was less than that of the wild‐type strain. Because Pra1 and Zrt1 are also related to the zinc homeostasis system, the effects of adding zinc on biofilm formation were also examined. Biofilm formation was increased in the presence of zinc. These data suggest that Pra1 and Zrt1 regulate biofilm formation through zinc homeostasis.