Impact of Substratum Surface on Microbial Community Structure and Treatment Performance in Biological Aerated Filters

The impact of substratum surface property change on biofilm community structure was investigated using laboratory biological aerated filter (BAF) reactors and molecular microbial community analysis. Two substratum surfaces that differed in surface properties were created via surface coating and used to develop biofilms in test (modified surface) and control (original surface) BAF reactors. Microbial community analysis by 16S rRNA gene-based PCR-denaturing gradient gel electrophoresis (DGGE) showed that the surface property change consistently resulted in distinct profiles of microbial populations during replicate reactor start-ups. Pyrosequencing of the bar-coded 16S rRNA gene amplicons surveyed more than 90% of the microbial diversity in the microbial communities and identified 72 unique bacterial species within 19 bacterial orders. Among the 19 orders of bacteria detected, Burkholderiales and Rhodocyclales of the Betaproteobacteria class were numerically dominant and accounted for 90.5 to 97.4% of the sequence reads, and their relative abundances in the test and control BAF reactors were different in consistent patterns during the two reactor start-ups. Three of the five dominant bacterial species also showed consistent relative abundance changes between the test and control BAF reactors. The different biofilm microbial communities led to different treatment efficiencies, with consistently higher total organic carbon (TOC) removal in the test reactor than in the control reactor. Further understanding of how surface properties affect biofilm microbial communities and functional performance would enable the rational design of new generations of substrata for the improvement of biofilm-based biological treatment processes.     

Development of a multispecies oral bacterial community in a saliva-conditioned flow cell

Microbial communities within the human oral cavity are dynamic associations of more than 500 bacterial species that form biofilms on the soft and hard tissues of the mouth. Understanding the development and spatial organization of oral biofilms has been facilitated by the use of in vitro models. We used a saliva-conditioned flow cell, with saliva as the sole nutritional source, as a model to examine the development of multispecies biofilm communities from an inoculum containing the coaggregation partners Streptococcus gordonii, Actinomyces naeslundii, Veillonella atypica, and Fusobacterium nucleatum. Biofilms inoculated with individual species in a sequential order were compared with biofilms inoculated with coaggregates of the four species. Our results indicated that flow cells inoculated sequentially produced biofilms with larger biovolumes compared to those biofilms inoculated with coaggregates. Individual-species biovolumes within the four-species communities also differed between the two modes of inoculation. Fluorescence in situ hybridization with genus- and species-specific probes revealed that the majority of cells in both sequentially and coaggregate-inoculated biofilms were S. gordonii, regardless of the inoculation order. However, the representation of A. naeslundii and V. atypica was significantly higher in biofilms inoculated with coaggregates compared to sequentially inoculated biofilms. Thus, these results indicate that the development of multispecies biofilm communities is influenced by coaggregations preformed in planktonic phase. Coaggregating bacteria such as certain streptococci are especially adapted to primary colonization of saliva-conditioned surfaces independent of the mode of inoculation and order of addition in the multispecies inoculum. Preformed coaggregations favor other bacterial strains and may facilitate symbiotic relationships.     

Development of a Multispecies Oral Bacterial Community in a Saliva-Conditioned Flow Cell

Microbial communities within the human oral cavity are dynamic associations of more than 500 bacterial species that form biofilms on the soft and hard tissues of the mouth. Understanding the development and spatial organization of oral biofilms has been facilitated by the use of in vitro models. We used a saliva-conditioned flow cell, with saliva as the sole nutritional source, as a model to examine the development of multispecies biofilm communities from an inoculum containing the coaggregation partners Streptococcus gordonii, Actinomyces naeslundii, Veillonella atypica, and Fusobacterium nucleatum. Biofilms inoculated with individual species in a sequential order were compared with biofilms inoculated with coaggregates of the four species. Our results indicated that flow cells inoculated sequentially produced biofilms with larger biovolumes compared to those biofilms inoculated with coaggregates. Individual-species biovolumes within the four-species communities also differed between the two modes of inoculation. Fluorescence in situ hybridization with genus- and species-specific probes revealed that the majority of cells in both sequentially and coaggregate-inoculated biofilms were S. gordonii, regardless of the inoculation order. However, the representation of A. naeslundii and V. atypica was significantly higher in biofilms inoculated with coaggregates compared to sequentially inoculated biofilms. Thus, these results indicate that the development of multispecies biofilm communities is influenced by coaggregations preformed in planktonic phase. Coaggregating bacteria such as certain streptococci are especially adapted to primary colonization of saliva-conditioned surfaces independent of the mode of inoculation and order of addition in the multispecies inoculum. Preformed coaggregations favor other bacterial strains and may facilitate symbiotic relationships.     

Standardized reactors for the study of medical biofilms: a review of the principles and latest modifications

Biofilms can cause severe problems to human health due to the high tolerance to antimicrobials; consequently, biofilm science and technology constitutes an important research field. Growing a relevant biofilm in the laboratory provides insights into the basic understanding of the biofilm life cycle including responses to antibiotic therapies. Therefore, the selection of an appropriate biofilm reactor is a critical decision, necessary to obtain reproducible and reliable in vitro results. A reactor should be chosen based upon the study goals and a balance between the pros and cons associated with its use and operational conditions that are as similar as possible to the clinical setting. However, standardization in biofilm studies is rare. This review will focus on the four reactors (Calgary biofilm device, Center for Disease Control biofilm reactor, drip flow biofilm reactor, and rotating disk reactor) approved by a standard setting organization (ASTM International) for biofilm experiments and how researchers have modified these standardized reactors and associated protocols to improve the study and understanding of medical biofilms.     

Autoinducer‐2 is produced in saliva‐fed flow conditions relevant to natural oral biofilms

Aims: We evaluated the ability of a dual‐species community of oral bacteria to produce the universal signalling molecule, autoinducer‐2 (AI‐2), in saliva‐fed biofilms. Methods and Results: Streptococcus oralis 34, S. oralis 34 luxS mutant and Actinomyces naeslundii T14V were grown as single‐ and dual‐species biofilms within sorbarods fed with 25% human saliva. AI‐2 concentration in biofilm effluents was determined by the Vibrio harveyi BB170 bioluminescence assay. After homogenizing the sorbarods to release biofilm cells, cell numbers were determined by fluorometric analysis of fluorescent antibody‐labelled cells. After 48 h, dual‐species biofilm communities of interdigitated S. oralis 34 and A. naeslundii T14V contained 3·2 × 10⁹ cells: fivefold more than single‐species biofilms. However, these 48‐h dual‐species biofilms exhibited the lowest concentration ratio of AI‐2 to cell density. Conclusions: Oral bacteria produce AI‐2 in saliva‐fed biofilms. The decrease of more than 10‐fold in concentration ratio seen between 1 and 48 h in S. oralis 34–A. naeslundii T14V biofilms suggests that peak production of AI‐2 occurs early and is followed by a very low steady‐state level. Significance and Impact of the Study: High oral bacterial biofilm densities may be achieved by inter‐species AI‐2 signalling. We propose that low concentrations of AI‐2 contribute to the establishment of oral commensal biofilm communities.     

Anaerobes in the upper respiratory tract in infancy

Development of the indigenous microbiota begins on the surfaces of the human body after birth when infants are exposed to continuous person-to-person and environmental contacts with microbes. Anaerobes constitute a significant part of indigenous bacterial communities at different body sites. Pioneering anaerobic commensals are able to colonize and survive in the oral cavity during the first months of life. After teeth emerge, more attachment sites and potential niches are available for anaerobic bacterial colonization. Specific partner relationships influence the composition and stability of forming multigeneric communities, biofilms, where Fusobacterium nucleatum is of specific interest. In infancy, the oral colonization seems to be rather stable at species level, though not at clonal level. The colonization pattern in the nasopharynx is different from that in the oral cavity; anaerobes are absent from healthy nasopharynges but transiently colonize this anatomical site during infection. The most plausible origin for nasopharyngeal anaerobes is the oral cavity and, conceivably, saliva is the most likely transmission vehicle. Whether anaerobic bacteria colonize the nasopharynx just because of ecological changes favoring their growth or whether they could play an active role in the pathogenesis of respiratory infections is not known.     

L-Arginine Destabilizes Oral Multi-Species Biofilm Communities Developed in Human Saliva

The amino acid L-arginine inhibits bacterial coaggregation, is involved in cell-cell signaling, and alters bacterial metabolism in a broad range of species present in the human oral cavity. Given the range of effects of L-arginine on bacteria, we hypothesized that L-arginine might alter multi-species oral biofilm development and cause developed multi-species biofilms to disassemble. Because of these potential biofilm-destabilizing effects, we also hypothesized that L-arginine might enhance the efficacy of antimicrobials that normally cannot rapidly penetrate biofilms. A static microplate biofilm system and a controlled-flow microfluidic system were used to develop multi-species oral biofilms derived from pooled unfiltered cell-containing saliva (CCS) in pooled filter-sterilized cell-free saliva (CFS) at 37^oC. The addition of pH neutral L-arginine monohydrochloride (LAHCl) to CFS was found to exert negligible antimicrobial effects but significantly altered biofilm architecture in a concentration-dependent manner. Under controlled flow, the biovolume of biofilms (μm³/μm²) developed in saliva containing 100-500 mM LAHCl were up to two orders of magnitude less than when developed without LAHCI. Culture-independent community analysis demonstrated that 500 mM LAHCl substantially altered biofilm species composition: the proportion of Streptococcus and Veillonella species increased and the proportion of Gram-negative bacteria such as Neisseria and Aggregatibacter species was reduced. Adding LAHCl to pre-formed biofilms also reduced biovolume, presumably by altering cell-cell interactions and causing cell detachment. Furthermore, supplementing 0.01% cetylpyridinium chloride (CPC), an antimicrobial commonly used for the treatment of dental plaque, with 500 mM LAHCl resulted in greater penetration of CPC into the biofilms and significantly greater killing compared to a non-supplemented 0.01% CPC solution. Collectively, this work demonstrates that LAHCl moderates multi-species oral biofilm development and community composition and enhances the activity of CPC. The incorporation of LAHCl into oral healthcare products may be useful for enhanced biofilm control.     

Association between living environment and human oral viral ecology

The human oral cavity has an indigenous microbiota known to include a robust community of viruses. Very little is known about how oral viruses are spread throughout the environment or to which viruses individuals are exposed. We sought to determine whether shared living environment is associated with the composition of human oral viral communities by examining the saliva of 21 human subjects; 11 subjects from different households and 10 unrelated subjects comprising 4 separate households. Although there were many viral homologues shared among all subjects studied, there were significant patterns of shared homologues in three of the four households that suggest shared living environment affects viral community composition. We also examined CRISPR (clustered regularly interspaced short palindromic repeat) loci, which are involved in acquired bacterial and archaeal resistance against invading viruses by acquiring short viral sequences. We analyzed 2 065 246 CRISPR spacers from 5 separate repeat motifs found in oral bacterial species of Gemella, Veillonella, Leptotrichia and Streptococcus to determine whether individuals from shared living environments may have been exposed to similar viruses. A significant proportion of CRISPR spacers were shared within subjects from the same households, suggesting either shared ancestry of their oral microbiota or similar viral exposures. Many CRISPR spacers matched virome sequences from different subjects, but no pattern specific to any household was found. Our data on viromes and CRISPR content indicate that shared living environment may have a significant role in determining the ecology of human oral viruses.     

Channel structures in aerobic biofilms of fixed-film reactors treating contaminated groundwater.

Scanning electron microscopy, confocal scanning laser microscopy, and fatty acid methyl ester profiles were used to study the development, organization, and structure of aerobic multispecies biofilm communities in granular activated-carbon (GAC) fluidized-bed reactors treating petroleum-contaminated groundwaters. The sequential development of biofilm structure was studied in a laboratory reactor fed toluene-amended groundwater and colonized by the indigenous aquifer populations. During the early stages of colonization, microcolonies were observed primarily in crevices and other regions sheltered from hydraulic shear forces. Eventually, these microcolonies grew over the entire surface of the GAC. This growth led to the development of discrete discontinuous multilayer biofilm structures. Cell-free channel-like structures of variable sizes were observed to interconnect the surface film with the deep inner layers. These interconnections appeared to increase the biological surface area per unit volume ratio, which may facilitate transport of substrates into and waste products out of deep regions of the biofilm at rates greater than possible by diffusion alone. These architectural features were also observed in biofilms from four field-scale GAC reactors that were in commercial operation treating petroleum-contaminated groundwaters. These shared features suggest that formation of cell-free channel structures and their maintenance may be a general microbial strategy to deal with the problem of limiting diffusive transport in thick biofilms typical of fluidized-bed reactors.     

Evidence of a robust resident bacteriophage population revealed through analysis of the human salivary virome

Viruses are the most abundant known infectious agents on the planet and are significant drivers of diversity in a variety of ecosystems. Although there have been numerous studies of viral communities, few have focused on viruses within the indigenous human microbiota. We analyzed 2 267 695 virome reads from viral particles and compared them with 263 516 bacterial 16S rRNA gene sequences from the saliva of five healthy human subjects over a 2- to 3-month period, in order to improve our understanding of the role viruses have in the complex oral ecosystem. Our data reveal viral communities in human saliva dominated by bacteriophages whose constituents are temporally distinct. The preponderance of shared homologs between the salivary viral communities in two unrelated subjects in the same household suggests that environmental factors are determinants of community membership. When comparing salivary viromes to those from human stool and the respiratory tract, each group was distinct, further indicating that habitat is of substantial importance in shaping human viromes. Compared with coexisting bacteria, there was concordance among certain predicted host–virus pairings such as Veillonella and Streptococcus, whereas there was discordance among others such as Actinomyces. We identified 122 728 virulence factor homologs, suggesting that salivary viruses may serve as reservoirs for pathogenic gene function in the oral environment. That the vast majority of human oral viruses are bacteriophages whose putative gene function signifies some have a prominent role in lysogeny, suggests these viruses may have an important role in helping shape the microbial diversity in the human oral cavity.     

Human oral cavity as a model for the study of genome-genome interactions

The enormous diversity of culturable bacteria within the oral microbial community coupled with experimental accessibility renders the human oral cavity a valuable model to investigate genome-genome interactions. The complex interactions of oral bacteria result in the formation of biofilms on the surfaces of the oral cavity. One mechanism thought to be important in biofilm formation is the coaggregation of bacterial partners. In this paper, we examine the role of coaggregation in oral biofilms and develop protocols to elucidate the spatial organization of bacterial species retained within oral biofilms. To explore these issues, we have employed two experimental systems: the saliva-coated flowcell and the retrievable enamel chip. From flowcell studies, we have determined that coaggregation can greatly influence the ability of an oral bacterial species to grow and be retained within the developing biofilm. To examine the spatial architecture of oral biofilms, fluorescent in situ hybridization protocols were developed that successfully target specific members of the oral microbial community. Together, these approaches provide insight into the development of oral biofilms and expand our understanding of genome-genome interactions.     

基于微流控的生物被膜研究进展及口腔微生态系统应用展望

口腔是人体最重要的微生物储藏库之一,这些微生物通常以生物被膜的形式稳定地黏附于口腔内粘膜及牙齿表面,在病理条件下则可以深入髓腔及牙槽骨内,成为龋病、根尖周炎、牙周病等常见口腔疾病的主要病因,甚至与许多全身性疾病密切相关.在人类口腔微生态系统中,微生物种类繁多,生物被膜的构成及相互作用关系复杂,目前对其认识还十分有限;此...     

Population diversity in model potable water biofilms receiving chlorine or chloramine residual

Abstract

Most water utilities use chlorine or chloramine to produce potable water. These disinfecting agents react with water to produce residual oxidants within a water distribution system (WDS) to control bacterial growth. While monochloramine is considered more stable than chlorine, little is known about the effect it has on WDS biofilms. Community structure of 10-week old WDS biofilms exposed to disinfectants was assessed after developing model biofilms from unamended distribution water. Four biofilm types were developed on polycarbonate slides within annular reactors while receiving chlorine, chloramine, or inactivated disinfectant residual. Eubacteria were identified through 16S rDNA sequence analysis. The model WDS biofilm exposed to chloramine mainly contained Mycobacterium and Dechloromonas sequences, while a variety of alpha- and additional beta-proteobacteria dominated the 16S rDNA clone libraries in the other three biofilms. Additionally, bacterial clones distantly related to Legionella were found in one of the biofilms receiving water with inactivated chlorine residual. The biofilm reactor receiving chloraminated water required increasing amounts of disinfectant after 2 weeks to maintain chlorine residual. In contrast, free chlorine residual remained steady in the reactor that received chlorinated water. The differences in bacterial populations of potable water biofilms suggest that disinfecting agents can influence biofilm development. These results also suggest that biofilm communities in distribution systems are capable of changing in response to disinfection practices.     

Population diversity in model potable water biofilms receiving chlorine or chloramine residual

Most water utilities use chlorine or chloramine to produce potable water. These disinfecting agents react with water to produce residual oxidants within a water distribution system (WDS) to control bacterial growth. While monochloramine is considered more stable than chlorine, little is known about the effect it has on WDS biofilms. Community structure of 10-week old WDS biofilms exposed to disinfectants was assessed after developing model biofilms from unamended distribution water. Four biofilm types were developed on polycarbonate slides within annular reactors while receiving chlorine, chloramine, or inactivated disinfectant residual. Eubacteria were identified through 16S rDNA sequence analysis. The model WDS biofilm exposed to chloramine mainly contained Mycobacterium and Dechloromonas sequences, while a variety of alpha- and additional beta-proteobacteria dominated the 16S rDNA clone libraries in the other three biofilms. Additionally, bacterial clones distantly related to Legionella were found in one of the biofilms receiving water with inactivated chlorine residual. The biofilm reactor receiving chloraminated water required increasing amounts of disinfectant after 2 weeks to maintain chlorine residual. In contrast, free chlorine residual remained steady in the reactor that received chlorinated water. The differences in bacterial populations of potable water biofilms suggest that disinfecting agents can influence biofilm development. These results also suggest that biofilm communities in distribution systems are capable of changing in response to disinfection practices.     

Communication among Oral Bacteria

Human oral bacteria interact with their environment by attaching to surfaces and establishing mixed-species communities. As each bacterial cell attaches, it forms a new surface to which other cells can adhere. Adherence and community development are spatiotemporal; such order requires communication. The discovery of soluble signals, such as autoinducer-2, that may be exchanged within multispecies communities to convey information between organisms has emerged as a new research direction. Direct-contact signals, such as adhesins and receptors, that elicit changes in gene expression after cell-cell contact and biofilm growth are also an active research area. Considering that the majority of oral bacteria are organized in dense three-dimensional biofilms on teeth, confocal microscopy and fluorescently labeled probes provide valuable approaches for investigating the architecture of these organized communities in situ. Oral biofilms are readily accessible to microbiologists and are excellent model systems for studies of microbial communication. One attractive model system is a saliva-coated flowcell with oral bacterial biofilms growing on saliva as the sole nutrient source; an intergeneric mutualism is discussed. Several oral bacterial species are amenable to genetic manipulation for molecular characterization of communication both among bacteria and between bacteria and the host. A successful search for genes critical for mixed-species community organization will be accomplished only when it is conducted with mixed-species communities.     

Communication among oral bacteria.

Human oral bacteria interact with their environment by attaching to surfaces and establishing mixed-species communities. As each bacterial cell attaches, it forms a new surface to which other cells can adhere. Adherence and community development are spatiotemporal; such order requires communication. The discovery of soluble signals, such as autoinducer-2, that may be exchanged within multispecies communities to convey information between organisms has emerged as a new research direction. Direct-contact signals, such as adhesins and receptors, that elicit changes in gene expression after cell-cell contact and biofilm growth are also an active research area. Considering that the majority of oral bacteria are organized in dense three-dimensional biofilms on teeth, confocal microscopy and fluorescently labeled probes provide valuable approaches for investigating the architecture of these organized communities in situ. Oral biofilms are readily accessible to microbiologists and are excellent model systems for studies of microbial communication. One attractive model system is a saliva-coated flowcell with oral bacterial biofilms growing on saliva as the sole nutrient source; an intergeneric mutualism is discussed. Several oral bacterial species are amenable to genetic manipulation for molecular characterization of communication both among bacteria and between bacteria and the host. A successful search for genes critical for mixed-species community organization will be accomplished only when it is conducted with mixed-species communities.     

Influence of detachment,substrate loading and reactor scale on the formation of biofilms in airlift reactors

 For a stable and reliable operation of the biofilm airlift suspension reactor (BAS reactor) means to control biomass concentration, biofilm thickness and biofilm morphology are required. For this reason, the influence of applied detachment forces and surface substrate loading on the formation of heterotrophic biofilms in laboratory-scale BAS reactors was studied. Detachment forces were altered by variation of the initial bare carrier concentration or the superficial air velocity. In addition, the dynamics of biofilm formation during start-up of a full scale BAS reactor (300 m³) was monitored and compared with the laboratory-scale start-up (3 l). This study shows that the biofilm morphology and strength were influenced to a large extent by the surface substrate loading and applied detachment forces. A moderate surface substrate loading and a high detachment force yielded smooth and strong biofilms. The combination of a high surface substrate loading and low detachment forces did lead to rough biofilms, but did not lead to the expected high amount of biomass on the carrier, apparently because of the formation of weaker biofilms. The strength of the bio-films appeared to be related to the detachment forces applied during biofilm formation, in combination with the surface substrate loading. The biofilm morphology and biomass on carrier in the BAS reactor can be controlled using the carrier concentration, substrate loading rate and the superficial air velocity as parameters. The dynamics of biofilm formation during the start-up of a full-scale BAS reactor proved to be similar to heterotrophic biofilm formation in laboratory-scale reactors. This indicates that a model system on the laboratory scale can successfully be applied to predict dynamic phenomena in the full-scale reactor. Received: 31 March 1995/Received revision: 11 August 1995/Accepted: 22 August 1995     

A simple rotating annular reactor for replicated biofilm studies

The performance of two types of rotating annular reactors for the cultivation of river biofilms was compared qualitatively and quantitatively. One reactor was a commercially available system with a rotating inner solid cylinder and polycarbonate slides in the outer fixed cylinder. The other, a non-commercial system manufactured in the laboratory, had the polycarbonate slides positioned on a machined, rotating inner cylinder. Microscale comparison of the biofilms was carried out using confocal laser scanning microscopy techniques including, fluorescent nucleic acid staining, fluor conjugated lectins and autofluorescence imaging. The results obtained indicated that the reactors were similar in terms of biofilm development pattern, thickness, bacterial biomass, and exopolymer production. Significant differences were found in terms of photosynthetic biomass with the glass bodied non-commercial reactor providing more favourable conditions for algal growth than the opaque polycarbonate outer cylinder of the commercial reactor. The study indicated that a simple inexpensive reactor constructed from available components and materials, produced river biofilms similar to those obtained using a commercial system but at substantially lower cost. The availability of such inexpensive annular reactors should facilitate much needed replicated studies of biofilm development.     

Novel Polyfermentor Intestinal Model (PolyFermS) for Controlled Ecological Studies: Validation and Effect of pH

In vitro gut fermentation modeling offers a useful platform for ecological studies of the intestinal microbiota. In this study we describe a novel Polyfermentor Intestinal Model (PolyFermS) designed to compare the effects of different treatments on the same complex gut microbiota. The model operated in conditions of the proximal colon is composed of a first reactor containing fecal microbiota immobilized in gel beads, and used to continuously inoculate a set of parallel second-stage reactors. The PolyFermS model was validated with three independent intestinal fermentations conducted for 38 days with immobilized human fecal microbiota obtained from three child donors. The microbial diversity of reactor effluents was compared to donor feces using the HITChip, a high-density phylogenetic microarray targeting small subunit rRNA sequences of over 1100 phylotypes of the human gastrointestinal tract. Furthermore, the metabolic response to a decrease of pH from 5.7 to 5.5, applied to balance the high fermentative activity in inoculum reactors, was studied. We observed a reproducible development of stable intestinal communities representing major taxonomic bacterial groups at ratios similar to these in feces of healthy donors, a high similarity of microbiota composition produced in second-stage reactors within a model, and a high time stability of microbiota composition and metabolic activity over 38 day culture. For all tested models, the pH-drop of 0.2 units in inoculum reactors enhanced butyrate production at the expense of acetate, but was accompanied by a donor-specific reorganization of the reactor community, suggesting a concerted metabolic adaptation and trigger of community-specific lactate or acetate cross-feeding pathways in response to varying pH. Our data showed that the PolyFermS model allows the stable cultivation of complex intestinal microbiota akin to the fecal donor and can be developed for the direct comparison of different experimental conditions in parallel reactors continuously inoculated with the exact same microbiota.