Polarization microscopy and microspectrophotometry of Sirius Red, Picrosirius and Chlorantine Fast Red aggregates and of their complexes with collagen

Summary A detailed quantitative analysis of the anisotropic properties of Sirius Red F3B, Picrosirius, and Chlorantine Fast Red crystals, and of their complexes with a macromolecularly oriented protein either in a pure form or as part of a tissue structure was carried out. Collagen I was used as the protein model. Linear dichroism and dispersion of birefringence were investigated in dye aggregates, in stained filaments of collagen I and in collagen bundles in sections of tendon. A positive linear dichroism, the characteristics of which varied as a function of the dye type used, was demonstrated for the dye aggregates and stained substrates. However, even thin regions of the stained tendon collagen bundles showed very high absorbances, differing from the pattern reported previously, for collagen stained with another sulphonated azo dye, Xylidine Ponceau. Consequently, not all these dyes enable protein concentration and orientation to be determined in collagen-containing structures. From the linear dichroism patterns it is assumed that the long axis of the molecules of these azo dye is mostly parallel to that of filaments of pure collagen I and statistically parallel to the long axis of collagen bundles of tendon sections. The dye aggregates and, stained pure collagen I and tendon collagen bundles exhibited birefringent images with interference colours that varied as a function of thickness and packing state of the preparations, which is in agreement with reports in the literature. The optical retardations of the collagen bundles increased by a factor of 5–6 times after staining with Picrosirius. From data on form dichroism it is concluded that when studying the macromolecular orientation of collagen preparations stained with azo dyes, the choice of the mounting medium deserves consideration.     

Experimental tendon repair: glycosaminoglycan arrangement in newly synthesized collagen fibers.

Changes in the macromolecular orientation and metachromasy of glycosaminoglycans (GAG) in newly synthesized and assembled collagen fibers in rat Achilles tendon after tendon excision were investigated in toluidine blue (TB)-stained preparations, based in the selective absorption of polarized light (= linear dichroism, LD) and of absorption of unpolarized light in situ. Extrinsic LD was observed microspectrophotometrically from the early phases of tendon repair onwards, although the absorption peaks in both parallel and perpendicular directions with respect to the plane of polarized light and the long axis of the collagen fibers occurred at the same wavelength, and thus differed from the pattern situation in normal adult controls. Compared to normal adult tendons, the pattern of LD in newly synthesized and assembled fibers was still not fully attained 110 days after surgical tendon removal. This incomplete recovery possibly reflected the influence of aging during the repair process. There was no correlation between LD and metachromasy. The highest absorption values for metachromatic staining occurred on the 7th day after tendon removal, at a time when LD was not intense. Treatment with hyaluronidase showed that the LD in the early stages of tendon repair was mostly due to hyaluronate whereas the LD in the later stages was due to chondroitin sulfates. The changes in LD during Achilles tendon repair were attributed to gradual modifications in the composition and macromolecular orientation of GAGs relative to the long axis of the collagen fibers.     

Spatial orientation mapping of fibers using polarization‐sensitive second harmonic generation microscopy

In this work, we present a non‐invasive approach to determine azimuth and elevation angles of collagen fibers capable of generating second harmonic signal. The azimuth angle was determined using the minimum of second harmonic generation (SHG) signal while rotating the plane of polarization of excitation light. The elevation angle was estimated from the ratio of the minimal SHG intensity to the intensity when laser polarization and fiber directions were parallel to each other using experimentally determined calibration curve. Pixel‐resolution images of collagen fiber spatial orientation in tendon from bovine leg, chicken leg, and chicken skin were acquired using our approach of SHG polarization‐resolved microscopy. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterization of collagen fiber architecture in the canine diaphragmatic central tendon.

The diaphragmatic central tendon (DCT), a collagenous soft tissue membrane, acts as a mechanical buffer between the costal and crural muscles. Its direction of mechanical anisotropy has been shown to correspond to the collagen fiber preferred directions. These preferred directions were determined by gross histological examination, and were thus qualitative. In this work we quantified the collagen fiber architecture throughout the DCT using small angle light scattering (SALS). Helium-Neon laser light was passed through tendon specimens and the resultant scattered light distribution, which characterized the local collagen fiber architecture, was recorded with a linear array of five photodiodes. Throughout the DCT two distinct collagen fiber populations were consistently found. For each population three parameters were determined: 1) the preferred directions of collagen fibers, 2) the volume fraction (Vf) of fibers, 3) OI, an orientation index, which ranges from 0 percent for a random network to 100 percent for a perfectly oriented network. Vector maps were used to display results from 1) and 2), and showed a primary group (G1) going from the crural to costal muscles and a secondary one (G2) running perpendicular to G1. Comparisons of Vf between G1 and G2 showed that G1 contained about three times as many fibers as G2, a ratio similar to that found for the degree of mechanical anisotropy. OI were found to be about 60 percent, indicating a high degree of orientation, with no significant regional or population differences (p less than 0.05). These quantitative results suggest that throughout the DCT the degree of mechanical anisotropy is controlled exclusively by Vf.     

Cover Picture: J. Biophotonics 10/2012

Pixel‐resolution mapping of collagen fiber spatial orientation in bovine leg tendon (upper row), chicken skin (middle row) and chicken leg tendon (bottom row) was achieved using polarization‐resolved SHG microscopy. Shown in the left column are SHG intensity images acquired by circularly polarized femtosecond laser. In addition, maps of fiber azimuthal angles are shown in the middle column. Finally, SHG image at different depths for bovine tendon (right column, upper panel) and fiber elevation angle maps for chicken skin and chicken leg tendon are shown in right column. Individual image size: 120 × 120 mm². (Picture: V. A. Hovhannisyan et al., pp. 768–776 in this issue)     

CD of gels and suspensions: apparent CD in the soret region of sickle hemoglobin gels

CD spectra in the soret region of sickle-cell deoxyhemoglobin (deoxy-HbS) fiber gels are radically different from the CD of deoxy-HbS in solution. An explanation is found using the Stokes–Mueller representation of the interaction of a polarized beam with the instrument optical train and sample to derive expressions for the apparent CD of gels and suspensions of optically active molecules that consist of randomly oriented domains or particles that are linearly dichroic and linearly birefringent. These theoretical considerations show that the apparent CD spectra from such systems have contributions from the LD and birefringence of each domain even if no net linear birefringence and dichroism is apparent in the sample. Thus, the interpretation of the CD from gels and suspensions is problematic, unless it can be demonstrated that each domain or particle has extremely small absorbance or that the LD and birefringence of each is a very small fraction of the total absorbance. As a result, we conclude that the spectra of HbS gels are not due to the CD of the heme per se; rather, they also reflect the randomly oriented domain structure of the gels and the LD and linear birefringence associated with each domain.     

On the anisotropy of the canine diaphragmatic central tendon

We studied the mechanical and anatomical anisotropy of the canine diaphragmatic central tendon (CT). Dumb-bell-shaped strips with effective dimensions of 10 x 2 mm (length x width) were cut from different regions of the canine diaphragmatic CT in two different orientations relative to the direction of neighboring muscle fibers. Specimens sampled with their long axial dimension oriented parallel to the neighboring muscle fibers were named Group-1 and those sampled with an orientation perpendicular to the neighboring muscle fibers were named Group-2. Results from one-dimensional stress-strain and tensile failure strength tests revealed that the CT is a nonlinear, inelastic, and anisotropic material. Group-1 specimens were found to have a higher stiffness, higher failure strength and higher strain energy density at failure than Group-2 specimens. Polarized microscopy showed that multiple sheets of collagen fiber bundles formed an orthogonal network in the tendon. Collagen fiber bundles along Group-1 direction formed parallel trajectory lines connecting the neighboring costal and crural muscles; bundles along Group-2 direction were observed to orient 90 degrees away. At the central apex region of the CT, collagen bundles of Group-1 formed a fan-like trajectory pattern. This collagen network architecture was compared favorably to the trajectories of an approximated principal stress field in the CT due to simulated contractile forces from its adjacent costal and crural muscles. These combined results suggest a structure-function relationship for the anatomical and mechanical anisotropy in the canine diaphragmatic CT.     

Effect of preconditioning and stress relaxation on local collagen fiber re-alignment: inhomogeneous properties of rat supraspinatus tendon

Repeatedly and consistently measuring the mechanical properties of tendon is important but presents a challenge. Preconditioning can provide tendons with a consistent loading history to make comparisons between groups from mechanical testing experiments. However, the specific mechanisms occurring during preconditioning are unknown. Previous studies have suggested that microstructural changes, such as collagen fiber re-alignment, may be a result of preconditioning. Local collagen fiber re-alignment is quantified throughout tensile mechanical testing using a testing system integrated with a polarized light setup, consisting of a backlight, 90 deg-offset rotating polarizer sheets on each side of the test sample, and a digital camera, in a rat supraspinatus tendon model, and corresponding mechanical properties are measured. Local circular variance values are compared throughout the mechanical test to determine if and where collagen fiber re-alignment occurred. The inhomogeneity of the tendon is examined by comparing local circular variance values, optical moduli and optical transition strain values. Although the largest amount of collagen fiber re-alignment was found during preconditioning, significant re-alignment was also demonstrated in the toe and linear regions of the mechanical test. No significant changes in re-alignment were seen during stress relaxation. The insertion site of the supraspinatus tendon demonstrated a lower linear modulus and a more disorganized collagen fiber distribution throughout all mechanical testing points compared to the tendon midsubstance. This study identified a correlation between collagen fiber re-alignment and preconditioning and suggests that collagen fiber re-alignment may be a potential mechanism of preconditioning and merits further investigation. In particular, the conditions necessary for collagen fibers to re-orient away from the direction of loading and the dependency of collagen reorganization on its initial distribution must be examined.     

A Blind Spot in Confocal Reflection Microscopy: The Dependence of Fiber Brightness on Fiber Orientation in Imaging Biopolymer Networks

We investigate the dependence of fiber brightness on three-dimensional fiber orientation when imaging biopolymer networks with confocal reflection microscopy (CRM) and confocal fluorescence microscopy (CFM). We compare image data of fluorescently labeled type I collagen networks concurrently acquired using each imaging modality. For CRM, fiber brightness decreases for more vertically oriented fibers, leaving fibers above ∼50° from the imaging plane entirely undetected. As a result, the three-dimensional network structure appears aligned with the imaging plane. In contrast, CFM data exhibit little variation of fiber brightness with fiber angle, thus revealing an isotropic collagen network. Consequently, we find that CFM detects almost twice as many fibers as are visible with CRM, thereby yielding more complete structural information for three-dimensional fiber networks. We offer a simple explanation that predicts the detected fiber brightness as a function of fiber orientation in CRM.     

In Vitro Orientation of Fibroblasts and Myoblasts on Aligned Collagen Film

A collagen film in which the collagen fibers were aligned was prepared and characterized by scanning electron microscopy. Cell orientation on this film was studied in vitro using human fibroblasts and chick embryo myoblasts. Ninety-four percent of innoculated fibroblasts were aligned along the direction of the collagen fiber. The cell orientation was disturbed when cytochalasin B or colchicine was added to the culture medium. The myoblasts showed a similar alignment along the direction of collagen fiber. The scanning electron microscopic observation revealed that none of the cytoplasmic extensions had consistent relationships to the direction of collagen fiber. Myoblast fusion was accelerated on the aligned membrane as compared to a randomly oriented film, suggesting some role of contact guidance in muscle cell differentiation.     

X-ray diffraction of reconstituted collagen fibers

The X-ray diffraction of fibers reconstituted from purified rat tail tendon collagen has been compared with that of native rat tail tendon. The axial structure is very similar in the two specimens, while the ordered lateral array found in the native state is only poorly reproduced in the reconstituted fiber. Thus, the axial order is determined by the collagen molecules alone, while the native lateral packing may depend, in part at least, on other tissue components.     

Is the tendon embryogenesis process resurrected during tendon healing?

The process of embryonic tendon development, including the nature and purpose of collagen fibril segments, is reviewed. It is proposed that tendon fibrillogenesis of repair is related to the fibrillogenesis of tendon embryonic development. The assembly of collagen fibril segment units into longer fibers occurs on the surface of tendon fibroblasts in embryonic tendon development. The biochemist's view of tendon healing, whereby the spontaneous polymerization of tropocollagen monomers regenerates lost tendon collagen fibers, needs to be reconsidered. Furthermore, the importance of direct fibroblast involvement in collagen fiber reassembly during tendon healing needs to be studied in tendon intrinsic regenerative repair.     

Absorbance signals from resting frog skeletal muscle fibers injected with the pH indicator dye, phenol red

Singly dissected twitch fibers from frog muscle were studied on an optical bench apparatus after micro-injection with the pH indicator dye, phenol red. Dye-related absorbances in myoplasm, denoted by A0(lambda) and A90(lambda), were estimated as a function of wavelength lambda (450 nm less than or equal to lambda less than or equal to 640 nm) with light polarized parallel (0 degrees) and perpendicular (90 degrees) to the fiber axis respectively. At all lambda, A0(lambda) was slightly greater than A90(lambda), indicating that some of the phenol red molecules were bound to oriented structures accessible to myoplasm. The phenol red "isotropic" signal, [A0(lambda) + 2A90(lambda)]/3, a quantity equal to the average absorbance of all the dye molecules independent of their orientation, had a spectral shape that was red-shifted by approximately 10 nm in comparison with in vitro dye calibration curves measured in 140 mM KCl. The red-shifted spectrum also indicates that some phenol red molecules were bound in myoplasm. A quantitative estimate of indicator binding was obtained from measurements of the dye's apparent diffusion constant in myoplasm, denoted by Dapp. The small value of Dapp, 0.37 x 10(-6) cm2 s-1 (at 16 degrees C), can be explained if approximately 80% of the dye was bound to myoplasmic sites of low mobility. To estimate the apparent myoplasmic pH, denoted by pHapp, the isotropic absorbance of phenol red was fitted by in vitro calibration spectra. pHapp was found to be independent of dye concentration (0.2-2 mM), but varied widely (range, 6.8-7.5; mean value, 7.17) among fibers judged from functional characteristics to be normal. When fibers were subjected to acid or alkaline loads by exposure to Ringer's solution containing, respectively, dissolved CO2 or NH3, the changes in pHapp were in agreement with those expected from pH micro-electrode studies. It is concluded that in spite of the several indications for the presence of bound phenol red inside muscle cells, the pHapp signal from the indicator is useful for monitoring changes in myoplasmic pH in response to physiological and pharmacological manipulations.     

Collagen fiber orientation and geometry effects on the mechanical properties of secondary osteons.

The effects of collagen fiber orientation and osteon geometry on the mechanical properties of secondary osteons under axial compression/tension and combined loadings (compression, bending and torsion) were investigated using a composite-beam finite-element model. Three cross-sectional shapes of secondary osteons were studied to show the effect of geometry. The results of stiffness are presented using the tension and compression properties for each lamella. The model shows that the mechanical properties of osteons are enhanced in bending and torsion when collagen fibers are oriented within 30 degrees of the loading axis. Osteons with alternating lamellar orientation are not well adapted to resist torsional moments, but alternate collagen fiber orientation has virtually no effect on the bending stiffness of osteons. Fiber orientation affects the mechanical properties less significantly when osteons are non-circular. Collagen fiber orientation and osteon geometry interact to determine the mechanical behavior of the osteon, and may act in a compensatory manner in the adaptive process.     

Physico-chemical study of the complexes of "33258 Hoechst" with DNA and nucleohistone.

The degree of binding of "33258 Hoechst" to DNA and nucleohistone has been determined by equilibrium dialysis and the properties of the complexes have been followed by different optical and electro-optical methods, after determining the orientation of the main transition moments within the dye molecule. The binding isotherm was found composed of a Langmuir-type and of a strongly cooperative component. The existence of two bound species yielded a continuous variation of most of the properties of the complexes studied as the amount of binding increased, while the hydrodynamic properties of the macromolecules were not affected. At low binding, the strongly bound dye molecules appeared to bind to highly fluorescent sites with their long axis oriented at 45 degree to the helix axis. As the binding proceeds, less fluorescent sites are cooperatively occupied and the inclination of these ligand molecules becomes closer to that of the base planes. These results are compatible with the formation of two external complexes with the double helical structure.     

Liquid crystallinity in collagen solutions and magnetic orientation of collagen fibrils

Studies of the optical birefringence of solutions of acid-soluble collagen from rat-tail tendon at 22°C in the pH range 1.0–6.0 show that collagen exhibits an isotropic to mesophase transition only between pH 2.4 and 3.0 at 10% weight concentration. Such liquid crystalline order is probably essential for the orientation of collagen in a magnetic field. When solutions of neutral salt-soluble collagen were precipitated at pH 7.0 by warming to 37°C (“heat gelling”) in a magnetic field of ca. 20 kG, the resulting fibrils wee oriented perpendicular to the direction of the field. Heat gelling is shown to be a useful technique for maintaining the orientation induced in precursor solutions even after the sample is removed from the magnetic field.     

Functional Grading of Mineral and Collagen in the Attachment of Tendon to Bone

Attachment of dissimilar materials is a major challenge because high levels of localized stress may develop at their interfaces. An effective biologic solution to this problem exists at one of nature's most extreme interfaces: the attachment of tendon (a compliant, structural “soft tissue”) to bone (a stiff, structural “hard tissue”). The goal of our study was to develop biomechanical models to describe how the tendon-to-bone insertion derives its mechanical properties. We examined the tendon-to-bone insertion and found two factors that give the tendon-to-bone transition a unique grading in mechanical properties: 1), a gradation in mineral concentration, measured by Raman spectroscopy; and 2), a gradation in collagen fiber orientation, measured by polarized light microscopy. Our measurements motivate a new physiological picture of the tissue that achieves this transition, the tendon-to-bone insertion, as a continuous, functionally graded material. Our biomechanical model suggests that the experimentally observed increase in mineral accumulation within collagen fibers can provide significant stiffening of the partially mineralized fibers, but only for concentrations of mineral above a “percolation threshold” corresponding to formation of a mechanically continuous mineral network within each collagen fiber (e.g., the case of mineral connectivity extending from one end of the fiber to the other). Increasing dispersion in the orientation distribution of collagen fibers from tendon to bone is a second major determinant of tissue stiffness. The combination of these two factors may explain the nonmonotonic variation of stiffness over the length of the tendon-to-bone insertion reported previously. Our models explain how tendon-to-bone attachment is achieved through a functionally graded material composition, and provide targets for tissue engineered surgical interventions and biomimetic material interfaces.     

Binding of cationic dyes to DNA: distinguishing intercalation and groove binding mechanisms using simple experimental and numerical models

Abstract

Simple methods for predicting intercalation or groove binding of dyes and analogous compounds with double stranded DNA are described. The methods are based on a quantitative assessment of the aspect (width to length) ratio of the dyes. The procedures were validated using a set of 38 cationic dyes of varied chemical structures binding to well oriented DNA fibers and assessing binding orientation by linear dichroism and polarized fluorescence. We demonstrated that low aspect ratio dyes bound by intercalation, whereas more rod-like dyes were groove binders. Some problems that result and possible applications are discussed briefly.     

Ultraviolet dichroic ratio of DNA from T2 and T5 bacteriophages

The dichroic ratios of T5st-O and T2H bacteriophage DNA molecules were measured throughout the ultraviolet region of the spectrum. Two methods of DNA orientation were studied: (1) orientation in solution in a Shimadzu flow dichroism instrument attached to a Beckman DU spectrophotometer, and (2) alcohol precipitation of the DNA from solution and orientation in a thin film on the quartz face of a humidity chamber. Spectra in the latter case were recorded using a Gary Model 14 spectrophotomcter fitted with Glan prisms. The lower wavelength limit was 215 mμ in both systems. The DNA preparations were carefully characterized as to spectral purity, sedimentation coefficient, hyperchromicity, protein content, and DNA content. In addition, the structure of the DNA oriented in films was inferred from x-ray diffraction patterns of fibers of the precipitated DXA. The A and B configurations of DNA in films could not be distinguished by the dichroic ratio measuiements. The dichroic ratio obtained for the film-oriented DNA at high relative humidity shows the same wavelength dependence as for the flow-oriented DNA. The same wavelength dependence for DNA in the fibrous state and in solution, when considered together with the x-ray diffract ion results, indicates that DNA in solution maintains an orientation of bases which is similar to that in fibers. I¹Or both solutions and films of DNA, the dichroic ratio is constant from 290mμ to 240 mμ and increases at wavelengths below 240 mμ. The increased parallel absorption below 240 mμ is consistent with the existence of an n→π* transition. The inherent molecular dichroic ratio is found to be the same for T5st-O DNA and T2H DNA in solution, and is a maximum of 0.09 ± 0.02 at 260 mμ.     

Preservation of elastic system fibers and of collagen molecular arrangement and stainability in an Egyptian mummy

The present findings show that both elastic system fibers and collagen markedly resisted change in tissues more than 2000 years old. The distribution of elastic fibers and elastic-related fibers (namely, oxytalan and elaunin fibers) in mummified tissues coincided with the observations made on the modern human tissues used as controls. The collagenous structures present in tissue sections obtained from the Egyptian mummy studied took on a deeply red colour when stained in the Picrosirius solution indicating that, as well as in the fresh controls, the basic groups in the collagen molecules were available for reacting with the strongly acidic dye Sirius Red. When viewed with polarized light, the collagen in the same tissue sections displayed an increased birefringence, which shows that the collagen molecules in mummified tissues maintain the oriented disposition which is typical of the modern human tissues used as controls. The methods employed have proved to be useful for the delineation of the elastic system fibers and of the collagenous scaffolding, which may be used as valuable landmarks in the study of the histoarchitecture of organs that have undergone considerable distortion.