The ratio and allometric scaling of speed, power, and strength in elite male rugby union players

This study compared the effectiveness of ratio and allometric scaling for normalizing speed, power, and strength in elite male rugby union players. Thirty rugby players (body mass [BM] 107.1 ± 10.1 kg, body height [BH] 187.8 ± 7.1 cm) were assessed for sprinting speed, peak power during countermovement jumps and squat jumps, and horizontal jumping distance. One-repetition maximum strength was assessed during a bench press, chin-up, and back squat. Performance was normalized using ratio and allometric scaling (Y/X), where Y is the performance, X, the body size variable (i.e., BM or BH), and b is the power exponent. An exponent of 1.0 was used during ratio scaling. Allometric scaling was applied using proposed exponents and derived exponents for each data set. The BM and BH variables were significantly related, or close to, performance during the speed, power and/or strength tests (p < 0.001-0.066). Ratio scaling and allometric scaling using proposed exponents were effective in normalizing performance (i.e., no significant correlations) for some of these tests. Allometric scaling with derived exponents normalized performance across all the tests undertaken, thereby removing the confounding effects of BM and BH. In terms of practical applications, allometric scaling with derived exponents may be used to normalize performance between larger rugby forwards and smaller rugby backs, and could provide additional information on rugby players of similar body size. Ratio scaling may provide the best predictive measure of performance (i.e., strongest correlations).     

Relations between force-velocity characteristics of the knee-hip extension movement and vertical jump performance

Relations between force-velocity characteristics of the multijoint movement of the lower limbs and vertical jump performance were investigated. A total of 67 untrained subjects (age: 19.54 +/- 2.38 years; height: 166.88 +/- 8.53 cm; body mass: 59.14 +/- 10.82 kg, mean +/- SD) performed isometric and isotonic knee-hip extension movements on a servo-controlled dynamometer, and the force-velocity relations were determined. Also, vertical jump (VJ) performance was measured with a jump gauge. The force-velocity relation was described with a linear function so that the maximum isometric force (Fmax) and the maximum unloaded velocity (Vmax) for the knee-hip extension movement were estimated by extrapolation. Maximum isometric force coincided with maximum isometric force, F(0) (F(0)/Fmax = 1.03 +/- 0.24). Maximum isometric force, Vmax, and maximum power output (Pmax) were positively correlated with VJ (r = 0.48, 0.68, and 0.76, respectively; p < 0.001). However, when Fmax, Vmax, and Pmax were normalized with body mass (BM), leg length (LL), and BM, respectively, no correlation was seen between Fmax/BM and VJ (r = 0.24, p > 0.05), and significant correlations were seen between Vmax/LL and VJ (r = 0.56, p < 0.001) and between Pmax/BM and VJ (r = 0.65, p < 0.001). On the other hand, Fmax and Vmax (r = 0.12, p > 0.05) and Fmax/BM and Vmax/LL (r = 0.05, p > 0.05) were not significantly correlated, indicating that Fmax and Vmax were independent variables. The present estimates of Fmax, Vmax, and Pmax can be useful for evaluating the actual performance of multijoint movement of the lower limbs. It is suggested that, although in untrained individuals the speed of movement might be a more important determinant of jump performance, jump performance ability has a potential to improve with increases in strength of the lower limb.     

Quantitative analysis of serum sodium concentration after prolonged running in the heat.

This study compared measured serum [Na(+)] (S([Na+]); brackets denote concentration) with that predicted by the Nguyen-Kurtz equation after manipulating ingested [Na(+)] and changes in body mass (DeltaBM) during prolonged running in the heat. Athletes (4 men, 4 women; 22-36 yr) ran for 2 h, followed by a run to exhaustion and 1-h recovery. During exercise and recovery, subjects drank a 6% carbohydrate solution without Na(+) (Na(+)0), 6% carbohydrate solution with 18 mmol/l Na(+) (Na(+)18), or 6% carbohydrate solution with 30 mmol/l Na(+) (Na(+)30) to maintain BM (0%DeltaBM), increase BM by 2%, or decrease BM by 2% or 4% in 12 separate trials. Net fluid, Na(+), and K(+) balance were measured to calculate the Nguyen-Kurtz predicted S([Na+]) for each trial. For all beverages, predicted and measured S([Na+]) were not significantly different during the 0%, -2%, and -4%DeltaBM trials (-0.2 +/- 0.2 mmol/l) but were significantly different during the +2%DeltaBM trials (-2.6 +/- 0.5 mmol/l). Overall, Na(+) consumption attenuated the decline in S([Na+]) (-2.0 +/- 0.5, -0.9 +/- 0.5, -0.5 +/- 0.5 mmol/l from pre- to postexperiment of the 0%DeltaBM trials for Na(+)30, Na(+)18, and Na(+)0, respectively) but the differences among beverages were not statistically significant. Beverage [Na(+)] did not affect performance; however, time to exhaustion was significantly shorter during the -4% (8 +/- 3 min) and -2% (14 +/- 3 min) vs. 0% (22 +/- 5 min) and +2% (26 +/- 6 min) DeltaBM trials. In conclusion, when athletes maintain or lose BM, changes in S([Na+]) can be accurately predicted by changes in the mass balance of fluid, Na(+), and K(+) during prolonged running in the heat.     

The effectiveness of scaling procedures for comparing ground reaction forces

Various scaling methods are used when attempting to remove the influence of anthropometric differences on ground reaction forces (GRF) when comparing groups. Though commonly used, ratio scaling often results in an over-correction. Allometric scaling has previously been suggested for kinetic variables but its effectiveness in partialing out the effect of anthropometrics is unknown due to a lack of consistent application. This study examined the effectiveness of allometric scaling vertical, braking and propulsive GRF and loading rate for 84 males and 47 females while running at 4.0 m/s. Raw, unfiltered data were ratio scaled by body mass (BM), height (HT), and BM multiplied by HT (BM1HT). Gender specific exponents for allometric scaling were determined by performing a log-linear (for BM and HT individually) or log-multilinear regression (BMHT). Pearson productmoment correlations were used to assess the effectiveness of each scaling method. Ratio scaling by BM, HT, or BM1HT resulted in an over-correction of the data for most variables and left a considerable portion of the variance still attributable to anthropometrics. Allometric scaling by BM successfully removed the effect of BM and HT for all variables except for braking GRF in males and vertical GRF in females. However, allometric scaling for BMHT successfully removed the effect of BM and HT for all reactionary forces in both genders. Based on these results, allometric scaling for BMHT was the most appropriate scaling method for partialing out the effect of BM and HT on kinetic variables to allow for effective comparisons between groups or individuals.     

Aerobic and anaerobic correlates of multiple sprint cycling performance

The aims of this study were to examine (a) the relationship between maximal oxygen uptake (VO(2)max) and several performance indices of multiple sprint cycling; (b) the relationship between maximal accumulated oxygen deficit (MAOD) and those same performance indices; and (c) the influence of recovery duration on the magnitude of those relationships. Twenty-five physically active men completed a VO(2)max test, a MAOD test, and 2 maximal intermittent (20 x 5 seconds) sprint cycling tests with contrasting recovery periods (10 seconds or 30 seconds). Mean +/- SD for age, height, and body mass were 20.6 +/- 1.5 years, 177.2 +/- 5.4 cm, and 78.2 +/- 8.2 kg, respectively. All tests were conducted on a friction-braked cycle ergometer with subsequent data normalized for body mass. Moderate (0.3 < or = r < 0.5) positive correlations were observed between power output data and MAOD (range, 0.31-0.46; 95% confidence limits, -0.10 to 0.72). Moderate to large positive correlations also were observed between power output data and VO(2)max, the magnitude of which increased as values were averaged across all sprints (range, 0.45-0.67; 95% confidence limits 0.07-0.84). Correlations between fatigue and VO(2)max were greater in the intermittent protocol with 30-second recovery periods (r = -0.34; 95% confidence limits, 0.06 to -0.65). The results of this study reflect the complex energetics associated with multiple sprint work. Though the findings add support to the idea that multiple sprint sports demand a combination of speed and endurance, further longitudinal research is required to confirm the relative importance of these parameters.     

A comparison of force curve profiles between the bench press and ballistic bench throws

The purpose of this study was to compare the peak force and force curve characteristics during a traditional bench press (BP) and a ballistic bench throw (BT). Eight (age = 21.0 +/- 2.3 years, height = 182.3 +/- 7.4 cm, body mass = 85.9 +/- 5.5 kg) semi-professional rugby league players with resistance and power training experience performed both BP and BT exercises at loads of 55 and 80% of their predicted one-repetition maximum. The force curves for each test were then divided into three intensity levels, set at low to moderate (0-75%), high (75-95%), and near-maximal force (95-100%). These values were obtained by determining the percentage of the range of motion (ROM) in which the force produced during each test was within these thresholds. The BT exercise produced significantly (p < 0.05) higher peak force than BP under both loading conditions. A significantly greater portion of the ROM during the 80% BT was at a high intensity in comparison with the BP. No significant differences were found between force intensity conditions at 55% loads. It can be concluded that performing the BT exercise results in a greater peak force output when compared with the traditional BP movement under both resistance training and maximal power loading conditions. Furthermore, performing the BT exercise with heavy loads results in a more efficient training method for maintaining high force levels throughout the ROM.     

Force-time curve characteristics and hormonal alterations during an eleven-week training period in elite women weightlifters

The purpose of this investigation was to study the effects of an 11-week training period performed by female weightlifters. Two weeks before this investigation, baseline measures for total testosterone, cortisol, and testosterone:cortisol ratio were collected. The 11-week training program consisted of the core exercises (i.e., clean, clean and jerk, and snatch) and other supplemental exercises (i.e., clean pull, snatch pull, squat, and front squat). Hormonal, isometric, and dynamic middle thigh pull force-time curve characteristics were assessed biweekly throughout the duration of the investigation, whereas volume load and training intensity were assessed weekly throughout the investigation. The testosterone:cortisol ratio of the baseline (1.19 +/- 0.64) was significantly different from the ratio of weeks 1 (0.67 +/- 0.36) and 9 (0.94 +/- 0.66). When the week-to-week values were compared, week 1 (0.67 +/- 0.36) was significantly different (P < 0.05; eta = 0.84) from week 3 (1.06 +/- 0.54). A very strong correlation (r = -0.83; r = 0.69) was found between the percentage change of the testosterone:cortisol ratio and volume load from weeks 1 to 11. Moderate to very strong correlations were noted between the percentage change in volume load and isometric peak force, peak force during the 30% isometric peak force trial, and peak force during the 100-kg trial during the 11 weeks of training. The primary finding of this study was that alterations in training volume load can result in concomitant changes in the anabolic-to-catabolic balance, as indicated by the testosterone:cortisol ratio, and the ability to generate maximal forces.     

Is there an influence of body mass on digesta mean retention time in herbivores? A comparative study on ungulates

The relation between body mass (BM) and digesta mean retention time (MRT) in herbivores was the focus of several studies in recent years. It was assumed that MRT scaled with BM(0.25) based on the isometric scaling of gut capacity (BM(1.0)) and allometric scaling of energy intake (BM(0.75)). Literature studies that tested this hypothesis produced conflicting results, arriving sometimes at higher or lower exponents than the postulated 0.25. This study was conducted with 8 ruminants (n=2-6 per species) and 6 hindgut fermenting species/breeds (n=2-6, warthog n=1) with a BM range of 60-4000 kg. All animals received a ration of 100% grass hay with ad libitum access. Dry matter intake was measured and the MRT was estimated by the use of a solute and a particle (1-2 mm) marker. No significant scaling of MRT(particle) with BM was observed for all herbivores (32 BM(0.04), p=0.518) and hindgut fermenters (32 BM(0.00), p=1.00). The scaling exponent for ruminants only showed a tendency towards significance (29 BM(0.12), p=0.071). Ruminants on average had an MRT(particle) 1.61-fold longer than hindgut fermenters. Whereas an exponent of 0.25 is reasonable from theoretical considerations, much lower exponents were found in this and other studies. The energetic benefit of increasing MRT is by no means continuous, since the energy released from a given food unit via digestion decreases over time. The low and non-significant scaling factors for both digestion types suggest that in ungulates, MRT is less influenced by BM (maximal allometric exponent ≤0.1) than often reported.     

Biomechanical comparison of unilateral and bilateral power snatch lifts

Biomechanical characteristics of the one-handed dumbbell power snatch (DBPS) were examined to determine whether significant differences existed between unilateral and bilateral weightlifting movements. Kinetic and kinematic movement data were recorded from 10 male weightlifters (mean +/- SD: age: 30.2 +/- 10.2 years; height: 174.2 +/- 4.4 cm; body mass: 81.5 +/- 14.6 kg) during one-handed dumbbell (DB) and traditional barbell (BBPS) power snatch performance with loads of approximately 80% of respective lift one repetition maximums (1RM) with the use of 2 synchronized Kistler force plates and high-speed 3-dimensional video. Results highlighted asymmetry in the ground reaction force and kinematic profile of the DBPS, which deviated from the observed patterns of the bilateral movement. This study found that the nonlifting side (the side corresponding with the hand that did not hold the DB) tended to generate a greater pull phase peak vertical ground reaction forces significantly faster (p = 0.001) than the lifting side (the side corresponding with the hand that held the DB) during the DBPS. In addition, the DBPS nonlifting side catch phase loading rate was approximately double that of the lifting side loading rate (p < 0.05). These results quantify symmetrical deviations in the movement patterns of the unilateral power snatch movement both during the concentric muscular contraction of load vertical displacement, and the loading implications of unilateral landing. This asymmetry supports the contention that unilateral variations of weightlifting movements may provide a different training stimulus to athletes.     

Hypertrophy signaling during peripartum cardiac remodeling

Molecular signaling pathways that regulate peripartum cardiac remodeling are not well understood. Our objectives were to study the role of mitogen-activated protein kinases (MAPKs), protein kinase B (Akt), and endothelial nitric oxide synthase (eNOS) in mediating pregnancy and postpartum (PP) cardiac remodeling. Methods: Adult female Sprague-Dawley rats were divided into nonpregnant (n = 5), 18 days pregnant (n = 5), 0 days PP (n = 7), and 14 days PP (n = 8). Rats underwent echocardiography under sedation to measure left ventricle (LV) size and function, and Western blots were performed to measure myocardial protein expression of MAPKs (p38, JNK, ERK), Akt, and eNOS. Results: 1) During pregnancy, there was an increase in LV mass (0.62 +/- 0.03 to 1.1 +/- 0.04 g, P < 0.001), mass/volume ratio (0.7 +/- 0.02 to 1.28 +/- 0.02 g/ml, P < 0.0001), and ejection fraction (EF) (64 +/- 3 to 74 +/- 2%). Whereas LV mass and mass/volume ratio returned to prepregnancy values in the PP period, EF remained below normal range (53 +/- 3%, P < 0.05). 2) The expression of anti-hypertrophic factors (p38, JNK, Akt) decreased during pregnancy and normalized PP, except JNK, which increased to higher than normal levels. eNOS also increased to higher than baseline levels PP. 3) Activation of p38 and JNK was directly correlated with lower LV mass/volume ratio (r = -0.81 and -0.71, respectively; P < 0.05). Conclusion: Pregnancy is associated with physiological cardiac hypertrophy. There is rapid reversal of hypertrophy in the PP period while recovery of cardiac function is delayed, possibly related to PP upregulation of JNK. A dysregulation of MAPK signaling may be an important determinant of PP cardiac dysfunction.     

Relationship between fat-to-fat-free mass ratio and decrements in leg strength after downhill running.

The purpose of this study was to determine whether greater body fat mass (FM) relative to lean mass would result in more severe muscle damage and greater decrements in leg strength after downhill running. The relationship between the FM-to-fat-free mass ratio (FM/FFM) and the strength decline resulting from downhill running (-11% grade) was investigated in 24 male runners [age 23.4 +/- 0.7 (SE) yr]. The runners were divided into two groups on the basis of FM/FFM: low fat (FM/FFM = 0.100 +/- 0.008, body mass = 68.4 +/- 1.3 kg) and normal fat (FM/FFM = 0.233 +/- 0.020, body mass = 76.5 +/- 3.3 kg, P < 0.05). Leg strength was reduced less in the low-fat (-0.7 +/- 1.3%) than in the normal-fat individuals (-10.3 +/- 1.5%) 48 h after, compared with before, downhill running (P < 0.01). Multiple linear regression analysis revealed that the decline in strength could be predicted best by FM/FFM (r2 = 0.44, P < 0.05) and FM-to-thigh lean tissue cross-sectional area ratio (r2 = 0.53, P < 0.05), with no additional variables enhancing the prediction equation. There were no differences in muscle glycogen, creatine phosphate, ATP, or total creatine 48 h after, compared with before, downhill running; however, the change in muscle glycogen after downhill running was associated with a higher FM/FFM (r = -0.56, P < 0.05). These data suggest that FM/FFM is a major determinant of losses in muscle strength after downhill running.     

The effects of combined ballistic and heavy resistance training on maximal lower- and upper-body strength in recreationally trained men

The purpose of the present study was to investigate the additive effects of ballistic training to a traditional heavy resistance training program on upper- and lower-body maximal strength. Seventeen resistance-trained men were randomly assigned to 1 of 2 groups: (i) a combined ballistic and heavy resistance training group (COM; age = 21.4 +/- 1.7 years, body mass = 82.7 +/- 15.1 kg) or (ii) a heavy resistance training group (HR; age = 20.1 +/- 1.2 years, body mass = 81.0 +/- 9.2 kg) and subsequently participated in an 8-week periodized training program. Training was performed 3 days per week, that is, 6-8 exercises per workout (6-8 traditional exercises for HR; 4-6 traditional + 2 ballistic exercises in COM) for 3-8 repetitions. A significant increase in 1-repetition maximum (1RM) squat was shown in both groups (COM = 15.2%; HR = 17.3%) with no difference observed between groups. However, 1RM bench press increased to a significantly greater extent (P = 0.04) in COM than HR (11.6% vs. 7.1%, respectively). For peak power attained during the jump squat, an interaction (P = 0.02) was observed where the 5.4% increase in COM and -3.2% reduction in HR were statistically significant. Nonsignificant increases were observed in peak plyometric push-up power in COM (8.5%) and HR (3.4%). Lean body mass increased significantly in both groups, with no between-group differences observed. The results of this study support the inclusion of ballistic exercises into a heavy resistance training program for increasing 1RM bench press and enhancing lower-body power.     

Flight speeds among bird species: allometric and phylogenetic effects

Flight speed is expected to increase with mass and wing loading among flying animals and aircraft for fundamental aerodynamic reasons. Assuming geometrical and dynamical similarity, cruising flight speed is predicted to vary as (body mass)^1/6 and (wing loading)^1/2 among bird species. To test these scaling rules and the general importance of mass and wing loading for bird flight speeds, we used tracking radar to measure flapping flight speeds of individuals or flocks of migrating birds visually identified to species as well as their altitude and winds at the altitudes where the birds were flying. Equivalent airspeeds (airspeeds corrected to sea level air density, U_e) of 138 species, ranging 0.01–10 kg in mass, were analysed in relation to biometry and phylogeny. Scaling exponents in relation to mass and wing loading were significantly smaller than predicted (about 0.12 and 0.32, respectively, with similar results for analyses based on species and independent phylogenetic contrasts). These low scaling exponents may be the result of evolutionary restrictions on bird flight-speed range, counteracting too slow flight speeds among species with low wing loading and too fast speeds among species with high wing loading. This compression of speed range is partly attained through geometric differences, with aspect ratio showing a positive relationship with body mass and wing loading, but additional factors are required to fully explain the small scaling exponent of U_e in relation to wing loading. Furthermore, mass and wing loading accounted for only a limited proportion of the variation in U_e. Phylogeny was a powerful factor, in combination with wing loading, to account for the variation in U_e. These results demonstrate that functional flight adaptations and constraints associated with different evolutionary lineages have an important influence on cruising flapping flight speed that goes beyond the general aerodynamic scaling effects of mass and wing loading.     

Hemodynamics of local cerebral blood flow induced by somatosensory stimulation under normoxia and hyperoxia in rats.

We observed changes in the local cerebral blood flow (LCBF), red blood cell (RBC) concentration and RBC velocity in alpha-chloralose anesthetized rats using laser-Doppler flowmetry during activation of the somatosensory cortex following electrical stimulation of the hind paw under hyperoxia (PaO(2)=513.5+/-48.4 mmHg; mean+/-S.D.) and normoxia (PaO(2)=106.4+/-8.4 mmHg). Electrical stimuli of 5 and 10 Hz (pulse width 0.1 ms) with an intensity of 1.5 mA were applied for 5 s (n=13 at 5 Hz, n=9 at 10 Hz). Baseline levels of LCBF and RBC concentration under hyperoxia were, respectively, 5.6+/-3.3 and 8.8+/-3.0% lower than those under normoxia (P<0.05), and that of RBC velocity under hyperoxia was slightly higher than that under normoxia (NS), suggesting mild vasoconstriction at rest under hyperoxia. At 5 Hz stimulation, after normalization to each baseline level, normalized response magnitudes of LCBF, RBC concentration and RBC velocity under hyperoxia were, respectively, 68.2+/-48.0, 71.1+/-65.5 and 66.0+/-56.3% greater than those under normoxia (P<0.05). At 10-Hz stimulation, normalized response magnitudes of LCBF and RBC concentration under hyperoxia were, respectively, 44.6+/-32.0 and 55.9+/-43.5% greater than those under normoxia (P<0.05), although a significant difference in the normalized response magnitude of RBC velocity was not detected between both conditions. The evoked LCBF under hyperoxia increased earlier, by approximately 0.15 s, than that under normoxia regardless of the stimulus frequency (P<0.05). These results suggest the involvement of oxygen interaction on the regulation of LCBF during neuronal activation.     

The influence of body size on measurements of overall cardiac function

The purpose of this study was to determine the best scaling method to account for the effects of body size on measurements of overall cardiac function and subsequently the interpretation of data based on cardiac power output (CPO). CPO was measured at rest (CPO(rest)) and at maximal exercise (CPO(max)) on 88 and 103 healthy but untrained men and women, respectively, over the age range of 20-70 yr. Cardiac reserve (CR) was calculated as CPO(max) - CPO(rest). CPO(rest), CPO(max), and CR were all significantly related to body mass (BM), body surface area (BSA), and lean body mass (LBM). The linear regression model failed to completely normalize these measurements. In contrast, the allometric model produced size-independent values of CPO. Furthermore, all the assumptions associated with the allometric model were achieved. For CPO(rest), mean body size exponents were BM(0.33), BSA(0.60), and LBM(0.47). For CPO(max), the exponents were BM(0.41), BSA(0.81), and LBM(0.71). For CR, mean body size exponents were BM(0.44), BSA(0.87), and LBM(0.79). LBM was identified (from the root-mean-squares errors of the separate regression models) as the best physiological variable (based on its high metabolic activity) to be scaled in the allometric model. Scaling of CPO to LBM(b) (where b is the scaling exponent) dramatically reduced the between-gender differences with only a 7% difference in CPO(rest) and CPO(max) values. In addition, the gender difference in CR was completely removed. To avoid erroneous interpretations and conclusions being made when comparing data between men and women of different ages, the allometric scaling of CPO to LBM(b) would seem crucial.     

Myocardial oxygen consumption and mechanical efficiency of a perfused dogfish heart preparation

Summary Oxygen consumption of an in-pericardium heart preparation from the spiny dogfish (Squalus acanthias) was linearly related to cardiac power output. Basal oxygen consumption, predicted from the regression, was 0.127 l · s^-1 · g ventricle mass^-1 and increased by 0.189 l · s^-1 · g ventricle mass^-1 per milliwatt of power generated. From the relationship between cardiac power output and mechanical efficiency, mechanical efficiency was predicted to increase with cardiac power output to a maximum of 21 %. Mechanical efficiency was measured during volume loading and pressure loading at two power outputs (50% and 72% of maximum power output). At 50% of maximum power output, mechanical efficiency increased significantly by 2.87%, from 11.9±0.3% to 14.8±0.5% (n=7), when flow was halved and output pressure doubled to achieve the same power output. Similarly, at 72% of maximum power output, mechanical efficiency increased from 14.74±0.92% to 17.61±0.84% (n=6) when flow was halved and output pressure doubled to generate the same higher level of power output. The increased mechanical efficiency at higher output pressures is believed to result from cardiac myocytes working within a length range where they are able to generate the most tension during contraction and are most efficient. We speculate that the loss of mechanical efficiency associated with large changes in sarcomere length, when stroke volume is large, is a driving force behind the use of frequency as the principal means of increasing cardiac output as observed in more active fishes, birds and mammals.Abbreviations BM body mass - CO cardiac output - HR heart rate - P _i mean cardiac input pressure - P _o mean cardiac output pressure - PO partial pressure of oxygen - SV stroke volume of heart - VM ventricle mass     

Normalization of joint moments during gait: a comparison of two techniques

Joint moments are commonly used to characterize gait. Factors like height and weight influence these moments. This study determined which of two commonly used normalization methods, body mass or body weight times height, most reduced the effects of height and weight on peak hip, knee, and ankle external moments during walking. The effectiveness of each normalization method in reducing gender differences was then tested. Gait data from 158 normal subjects were analyzed using unnormalized values, body mass normalized values, and body weight times height normalized values. Without normalization, height or weight accounted for 7-82% of the variance in all 10 peak components of the moments. With normalization, height and weight accounted for at most 6% of the variance with the exception of the hip adduction moment normalized by body weight times height and the ankle dorsiflexion moment normalized by body mass. For the hip adduction moment normalized by body weight times height, height still accounted for 13% of the variance (p<0.001) and for the ankle dorsiflexion moment normalized by body mass, 22% of the variance (p<0.001). After normalization, significant differences between males and females remained for only two out of 10 moments with the body weight times height method compared to six out of 10 moments with the body mass method. When compared to the unnormalized data, both normalization methods were highly effective in reducing height and weight differences. Even for the two cases where one normalization method was less effective than the other (hip adduction-body weight times height; ankle dorsiflexion-body mass) the normalization process reduced the variance ascribed to height or weight by 48% and 63%, respectively, as compared to the unnormalized data.     

Trabecular bone modulus-density relationships depend on anatomic site

One outstanding issue regarding the relationship between elastic modulus and density for trabecular bone is whether the relationship depends on anatomic site. To address this, on-axis elastic moduli and apparent densities were measured for 142 specimens of human trabecular bone from the vertebra (n=61), proximal tibia (n=31), femoral greater trochanter (n=23), and femoral neck (n=27). Specimens were obtained from 61 cadavers (mean+/-SD age=67+/-15 years). Experimental protocols were used that minimized end-artifact errors and controlled for specimen orientation. Tissue moduli were computed for a subset of 18 specimens using high-resolution linear finite element analyses and also using two previously developed theoretical relationships (Bone 25 (1999) 481; J. Elasticity 53 (1999) 125). Resultant power law regressions between modulus and density did depend on anatomic site, as determined via an analysis of covariance. The inter-site differences were among the leading coefficients (p<0.02), but not the exponents (p>0.08), which ranged 1.49-2.18. At a given density, specimens from the tibia had higher moduli than those from the vertebra (p=0.01) and femoral neck (p=0.002); those from the trochanter had higher moduli than the vertebra (p=0.02). These differences could be as large as almost 50%, and errors in predicted values of modulus increased by up to 65% when site-dependence was ignored. These results indicate that there is no universal modulus-density relationship for on-axis loading. Tissue moduli computed using methods that account for inter-site architectural variations did not differ across site (p>0.15), suggesting that the site-specificity in apparent modulus-density relationships may be attributed to differences in architecture.     

Carbohydrate loading failed to improve 100-km cycling performance in a placebo-controlled trial.

We evaluated the effect of carbohydrate (CHO) loading on cycling performance that was designed to be similar to the demands of competitive road racing. Seven well-trained cyclists performed two 100-km time trials (TTs) on separate occasions, 3 days after either a CHO-loading (9 g CHO. kg body mass(-1). day(-1)) or placebo-controlled moderate-CHO diet (6 g CHO. kg body mass(-1). day(-1)). A CHO breakfast (2 g CHO/kg body mass) was consumed 2 h before each TT, and a CHO drink (1 g CHO. kg(.)body mass(-1). h(-1)) was consumed during the TTs to optimize CHO availability. The 100-km TT was interspersed with four 4-km and five 1-km sprints. CHO loading significantly increased muscle glycogen concentrations (572 +/- 107 vs. 485 +/- 128 mmol/kg dry wt for CHO loading and placebo, respectively; P < 0.05). Total muscle glycogen utilization did not differ between trials, nor did time to complete the TTs (147.5 +/- 10.0 and 149.1 +/- 11.0 min; P = 0.4) or the mean power output during the TTs (259 +/- 40 and 253 +/- 40 W, P = 0.4). This placebo-controlled study shows that CHO loading did not improve performance of a 100-km cycling TT during which CHO was consumed. By preventing any fall in blood glucose concentration, CHO ingestion during exercise may offset any detrimental effects on performance of lower preexercise muscle and liver glycogen concentrations. Alternatively, part of the reported benefit of CHO loading on subsequent athletic performance could have resulted from a placebo effect.