Micropatterning of porous silicon films by direct laser writing

In this study, we demonstrate that porous silicon films can be ablated by the pulsed nitrogen laser of a commercial MALDI mass spectrometer. The extent of laser-induced ablation was found to depend on the doping level and surface chemistry of the porous silicon film. Using direct laser writing with or without a mask, micropatterns were generated on the porous silicon surface. These micropatterns were subsequently used to guide the growth of mammalian cells including neuroblastoma. Excellent selectivity of cell growth toward the laser-ablated regions was established.     

Response of MG63 Osteoblast Cells to Surface Modification of Ti-6Al-4V Implant Alloy by Laser Interference Lithography

The response of human osteoblast-like osteosarcoma cells (MG63) to surface modification of Ti-6Al-4V implant alloy was investigated by Laser Interference Lithography (LIL).In this work,laser interference lithography was employed to fabricate the microstructures of grooves,dots and dimples onto the surfaces of Ti-6Al-4V samples.Two and three beam LIL systems were developed to carry out the experiments.The laser treatment resulted in the increases of the roughness and the contact angle of water on the implant alloy surfaces.The proliferation of osteoblasts was analyzed by MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide) assay for the time periods of 4 hours,2 days,3 days,and 6 days.The MTT test results demonstrated that the laser treatment surfaces had a positive impact on the proliferation of osteoblast cells after 24 hours.The alloy surface morphology and the morphological changes of MG63 cells cultured on the laser textured Ti-6Al-4V surface were observed by Scanning Electron Microscope (SEM).The SEM results indicated that the osteoblast cells were aligned on grooved surfaces and they were prolonged with the structures.Enzymatic detachment results showed that the 20 μm grooved structures provided the better cell adhesion to the textured Ti-6Al-4V surfaces.     

Enhanced Cell Adhesion and Alignment on Micro-Wavy Patterned Surfaces

Various micropatterns have been fabricated and used to regulate cell adhesion, morphology and function. Micropatterns created by standard photolithography process are usually rectangular channels with sharp corners (microgrooves) which provide limited control over cells and are not favorable for cell-cell interaction and communication. This paper proposes a new micropattern with smooth wavy surfaces (micro-waves) to control the position and orientation of cells. To characterize cell growth and responses on the micro-patterned substrates, bovine aortic endothelial cells were seeded onto surfaces with micro-grooves and micro-waves for 24 h. As a result, the cells on the micro-wavy pattern appeared to have a lower death rate and better alignment compared to those on the micro-grooved pattern. In addition, flow-induced shear stress was applied to examine the adhesion strength of cells on the micro-wavy pattern. Results showed that cells adhered to the wavy surface displayed both improved alignment and adhesion strength compared to those on the flat surface. The combination of increased alignment, lower death rate and enhanced adhesion strength of cells on the micro-wavy patterns will offer advantages in potential applications for cell phenotype, proliferation and tissue engineering.     

Micropatterns in Festuca rubra-dominated salt-marsh vegetation induced by sheep grazing

Micropatterns induced by sheep grazing, were studied in three consecutive years in a Festuca rubra-dominated salt marsh in a grazing trial with five different stocking rates (0, 1.5, 3, 4.5 and 10 sheep ha^-1). The micropatterns were formed by a mosaic of short and tall F. rubra stands on a scale of square decimeters. Permanent transects of 2 m × 10 m were used to study the stability of these patterns, and to analyze interactions between the vegetation, the marsh elevation and the sheep. Micropatterns occurred only in the lightly to moderately grazed paddocks (1.5–4.5 sheep ha^-1) with the highest spatial diversity in the 3 sheep ha^-1 transect. When grazing was excluded, micropatterns did not develop; nor did they develop in the traditionally and most intensively grazed paddock (10 sheep ha^-1). Detailed observations in one year showed that crude-protein content did not differ between green leaves from the short and tall stands, whereas in vitro digestibility was slightly higher in the short stands. In the same year, tiller density and length of full-grown leaves increased substantially in both stands from May to September. At the same time, sheep preference shifted from tall to short stands, which suggests an interplay between intake rate and digestibility in the sheep selectivity.Seven years after establishment of the grazing trial, the 10 sheep ha^-1 transect still showed a smooth relief typical of the starting point of the other transects. These transects developed a more hummocky topography, with the highest spatial diversity occurring on the 1.5 sheep ha^-1 transect. Marsh elevations were on average up to 3 cm lower in the short than in the tall stands, which indicates that the somewhat lower-elevated patches were grazed more intensively than the higher-elevated patches.In most cases, micropatterns changed from one year to the other, probably due to weather fluctuations. The incidence of tall stands was influenced by the rainfall balance. If the incidences of both the short and the tall stands were around 50%, however, the micropatterns showed a clear correlation with the marsh elevation. The rainfall balance seemed therefore a decisive factor for a possible correspondence between micropatterns in two consecutive years. Elevation differences were so subtle that greater than average sedimentation during a winter season could change the elevation pattern. Hence both rainfall balance and winter sedimentation counteracted the stability of the micropatterns. During our three-year study period, micropatterns were only stable in one out of six possible paired comparisons. This low micropattern stability contrasts with other studies in inland environments, which shows that in more dynamic environments, abiotic processes are likely to overrule summer grazing in determining vegetation patterns.     

Microfilament distribution and adhesion patterns in cultured cells after glutaraldehyde-formaldehyde fixation

To study the relationship between microfilament distribution and adhesion patterns in the same cultured cell, we have employed a simple glutaraldehyde-formaldehyde fixation technique followed by permeabilization of the cells in buffered Triton X-100. This method gives an excellent preservation of cellular morphology in general and of adhesion patterns in particular for examination with surface reflection interference microscopy. It also permits the concomitant use of the actin-specific fluorescent probe NBD-phallacidin to visualize the distribution of microfilaments.     

An air-liquid interface promotes the differentiation of gastric surface mucous cells (GSM06) in culture

The gastric surface epithelium is situated at an air-liquid interface because the luminal surface of the alimentary tract is in continuity with the air phase. However, the effects of this microenvironment on the gastric epithelium remain unclear. The aim of this study was to clarify the effects of an air-liquid interface on gastric epithelial cell biology. Gastric surface mucous cells (GSM06) were cultured at an air-liquid interface. Cultured cells were examined by histology, histochemistry, and transmission electron microscopy. When the cells were cultured at an air-liquid interface, the surface cells on the collagen gel became tall columnar and secreted periodic acid-Shiff-positive substances at the apical surface. These cells indicated many mucous granules in the apical cytoplasm and organized the basal lamina at the contact side with the gel. In contrast, under immersed condition, the surface cells showed immature features. This is the first report of an air-liquid interface promoting the differentiation of gastric surface mucous cells in a reconstruction culture of the gastric surface epithelial layer, suggesting that an air-liquid interface may function as a crucial luminal factor to maintain the homeostasis of gastric mucosa.     

Response of cells on surface-induced nanopatterns: fibroblasts and mesenchymal progenitor cells

Ultrathin films of a poly(styrene)-block-poly(2-vinylpyrindine) diblock copolymer (PS-b-P2VP) and poly(styrene)-block-poly(4-vinylpyrindine) diblock copolymer (PS-b-P4VP) were used to form surface-induced nanopattern (SINPAT) on mica. Surface interaction controlled microphase separation led to the formation of chemically heterogeneous surface nanopatterns on dry ultrathin films. Two distinct nanopatterned surfaces, namely, wormlike and dotlike patterns, were used to investigate the influence of topography in the nanometer range on cell adhesion, proliferation, and migration. Atomic force microscopy was used to confirm that SINPAT was stable under cell culture conditions. Fibroblasts and mesenchymal progenitor cells were cultured on the nanopatterned surfaces. Phase contrast and confocal laser microscopy showed that fibroblasts and mesenchymal progenitor cells preferred the densely spaced wormlike patterns. Atomic force microscopy showed that the cells remodelled the extracellular matrix differently as they migrate over the two distinctly different nanopatterns.     

Micropatterning and characterization of electrospun poly(ε‐caprolactone)/gelatin nanofiber tissue scaffolds by femtosecond laser ablation for tissue engineering applications

Experimental investigations aimed at assessing the effectiveness of femtosecond (FS) laser ablation for creating microscale features on electrospun poly(ε‐caprolactone) (PCL)/gelatin nanofiber tissue scaffold capable of controlling cell distribution are described. Statistical comparisons of the fiber diameter and surface porosity on laser‐machined and as‐spun surface were made and results showed that laser ablation did not change the fiber surface morphology. The minimum feature size that could be created on electrospun nanofiber surfaces by direct‐write ablation was measured over a range of laser pulse energies. The minimum feature size that could be created was limited only by the pore size of the scaffold surface. The chemical states of PCL/gelatin nanofiber surfaces were measured before and after FS laser machining by attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS) and showed that laser machining produced no changes in the chemistry of the surface. In vitro, mouse embryonic stem cells (mES cells) were cultured on as‐spun surfaces and in laser‐machined microwells. Cell densities were found to be statistically indistinguishable after 1 and 2 days of growth. Additionally, confocal microscope imaging confirmed that spreading of mES cells cultured within laser‐machined microwells was constrained by the cavity walls, the expected and desired function of these cavities. The geometric constraint caused statistically significant smaller density of cells in microwells after 3 days of growth. It was concluded that FS laser ablation is an effective process for microscale structuring of these electrospun nanofiber tissue scaffold surfaces. Biotechnol. Bioeng. 2011; 108:116–126. © 2010 Wiley Periodicals, Inc.     

A lymphoblastoid cell line with high phagocytic activity established from peripheral blood of a patient with chronic myelocytic leukemia in blast crisis

A human hematopoietic cell line (K-23-M) was established from a patient with chronic myelocytic leukemia in blast crisis. Morphologically, the cultured cells were lymphoblastoid cells that produced IgA and were Epstein-Barr viral nuclear antigen positive. But they showed high phagocytic activity to glutaraldehyde-treated sheep red cells and had properties of a monocyte or macrophage that included surface Fc receptors, alpha-naphthyl butyrate esterase positivity blocked by NaF, migration in soft agar and the ability to attach to a glass surface. Lysozyme secretion was absent, and chromosomes were diploid and Ph1 negative. This cell line is unique in that it has strong phagocytic activity. Its existence shows that lymphoblastoid cell line may be a more important cell line for the study of human hematopoietic cells than previously has been believed.     

Establishment of a cell line producing basement membrane components from an adenoid cystic carcinoma of the human salivary gland

A new cell line has been established from an adenoid cystic carcinoma arising in the submandibular gland of a 63-year-old woman. The cultured epithelial-like cells grew vigorously and adhered together to form a sheet. Immunohistochemical stainings for type IV collagen, laminin and fibronectin were clearly positive in the intercellular matrix and on the surface of the culture cells. Chondroitin 6-sulfate proteoglycan and heparan sulfate were also detected. Ultrastructural studies showed that the cells had abundant rough endoplasmic reticulum and a well-developed Golgi apparatus. Rough endoplasmic reticulum near the cell surface was markedly dilated, and contained material of low electron density. This cell line would be useful for biological and biochemical studies on the mechanisms by which the stromal component is formed.     

Establishment of a cell line producing basement membrane components from an adenoid cystic carcinoma of the human salivary gland

A new cell line has been established from an adenoid cystic carcinoma arising in the submandibular gland of a 63-year-old woman. The cultured epithelial-like cells grew vigorously and adhered together to form a sheet. Immunohistochemical stainings for type IV collagen, laminin and fibronectin were clearly positive in the intercellular matrix and on the surface of the culture cells. Chondroitin 6-sulfate proteoglycan and heparan sulfate were also detected. Ultrastructural studies showed that the cells had abundant rough endoplasmic reticulum and a well-developed Golgi apparatus. Rough endoplasmic reticulum near the cell surface was markedly dilated, and contained material of low electron density. This cell line would be useful for biological and biochemical studies on the mechanisms by which the stromal component is formed.     

Vascular smooth muscle cells on polyelectrolyte multilayers: hydrophobicity-directed adhesion and growth

Polyelectrolyte multilayer films were employed to support attachment of cultured rat aortic smooth muscle A7r5 cells. Like smooth muscle cells in vivo, cultured A7r5 cells are capable of converting between a nonmotile "contractile" phenotype and a motile "synthetic" phenotype. Polyelectrolyte films were designed to examine the effect of surface charge and hydrophobicity on cell adhesion, morphology, and motility. The hydrophobic nature and surface charge of different polyelectrolyte films significantly affected A7r5 cell attachment and spreading. In general, hydrophobic polyelectrolyte film surfaces, regardless of formal charge, were found to be more cytophilic than hydrophilic surfaces. On the most hydrophobic surfaces, the A7r5 cells adhered, spread, and exhibited little indication of motility, whereas on the most hydrophilic surfaces, the cells adhered poorly if at all and when present on the surface displayed characteristics of being highly motile. The two surfaces that minimized cell adhesion consisted of two varieties of a diblock copolymer containing hydrophilic poly(ethylene oxide) and a copolymer bearing a zwitterionic group AEDAPS, (3-[2-(acrylamido)-ethyldimethyl ammonio] propane sulfonate). Increasing the proportion of AEDAPS in the copolymer decreased the adhesion of cells to the surface. Cells presented with micropatterns of cytophilic and cytophobic surfaces generated by polymer-on-polymer stamping displayed a surface-dependent cytoskeletal organization and a dramatic preference for adhesion to, and spreading on, the cytophilic surface, demonstrating the utility of polyelectrolyte films in manipulating smooth muscle cell adhesion and behavior.     

Investigating design principles of micropatterned encapsulation systems containing high-density microtissue arrays

Immunoisolation is an important strategy to protect transplanted cells from rejection by the host immune system.Recently,microfabrication techniques have been used to create hydrogel membranes to encapsulate microtissue in an arrayed organization.The method illustrates a new macroencapsulation paradigm that may allow transplantation of a large number of cells with microscale spatial control,while maintaining an encapsulation device that is easily maneuverable and remaining integrated following transplantation.This study aims to investigate the design principles that relate to the translational application of micropatterned encapsulation membranes,namely,the control over the transplantation density/quantity of arrayed microtissues and the fidelity of pre-formed microtissues to micropatterns.Agarose hydrogel membranes with microwell patterns were used as a model encapsulation system to exemplify these principles.Our results show that high-density micropatterns can be generated in hydrogel membranes,which can potentially maximize the percentage volume of cellular content and thereby the transplantation efficiency of the encapsulation device.Direct seeding of microtissues demonstrates that microwell structures can efficiently position and organize pre-formed microtissues,suggesting the capability of micropatterned devices for manipulation of cellular transplants at multicellular or tissue levels.Detailed theoretical analysis was performed to provide insights into the relationship between micropatterns and the transplantation capacity of membrane-based encapsulation.Our study lays the ground for developing new macroencapsulation systems with microscale cellular/tissue patterns for regenerative transplantation.     

Inhibition of Murine Bladder Cancer Cell Growth In Vitro by Photocontrollable siRNA Based on Upconversion Fluorescent Nanoparticles

This study provides a unique approach to activate caged small interfering RNAs (siRNAs) using indirect UV light emitted by the near-infrared (NIR)-to-UV upconversion process to achieve high spatial and temporal gene interference patterns. siRNA molecules against the anti-apoptotic gene survivin was caged by light-sensitive molecules (4,5-dimethoxy-2-nitroacetophenone, DMNPE), which rendered them temporarily non-functional. NIR-to-UV NaYF₄:Yb,Tm upconversion nanoparticles (UCPs) served as delivery vehicles and activators of the caged siRNA molecules in murine bladder cancer cells (MB49 cell line). Upconverted UV light at 355 nm was emitted from the NIR-irradiated UCPs, which well coincided with the wavelength needed to uncage DMNPE. Consequently, UV light acted as a switch to uncage the delivered siRNA molecule, thereby rendering fully functional for exerting its therapeutic effect in the bladder cancer cells. To achieve the highest RNA interference efficiency, conditions such as time after cellular uptake, excitation time, UCPs concentration and laser power were optimized. Results showed that 200 µg/mL nanoparticle concentration combined with 12 h incubation with MB49 cells and excitation with NIR laser at 100 mW power for 15 min provided the ideal interference efficiency and strongest induction of MB49 cell death. Our findings demonstrate the potential biological application of UCPs in treating bladder cancer by a novel therapeutic approach.     

Locomotion of sponges and its physical mechanism

Active locomotion by individual marine and freshwater sponges across glass, plastic and rubber substrata has been studied in relation to the behavior of the sponges' component cells. Sequential tracing of sponge outlines on aquarium walls shows that sponges can crawl up to 160 microns/hr (4 mm/day). Time-lapse cinemicrography and scanning electron microscopy reveal that moving sponges possess distinctive leading edges composed of motile cells. Sponge locomotion was found to be mechanically similar to the spreading of cell sheets in tissue culture both with respect to exertion of traction (which causes the wrinkling of rubber substrata) and with respect to the patterns of adhesive contacts formed with the substratum (as observed by interference reflection microscopy). Other similarities include the orientation of sponge locomotion along grooves and the preferential extension onto more adhesive substrata. Neither the patterns of wrinkling produced in rubber substrata nor the distributions of adhesive contacts seen by interference reflection microscopy show evidence of periodic, propagating waves of surface contractions, such as would be expected if the sponges' mechanism of locomotion were by peristalsis or locomotory waves. Our observations suggest that the displacement of sponges is achieved by the cumulative crawling locomotion of the cells that compose the sponge's lower surface. This mode of organismal locomotion suggests new explanations for the plasticity of sponge morphology, seems not to have been reported from other metazoans, and has significant ecological implications.     

Facile induction of apoptosis into plant cells associated with temperature-sensitive lethality shown on interspecific hybrid from the cross Nicotiana suaveolens x N. tabacum

Two lines of suspension culture cells were obtained from a hybrid seedling of Nicotiana suaveolens Lehm. x N. tabacum L. cv. Hicks-2 expressing temperature-sensitive lethality. One of them (LH line) was inducible cell death in accordance with the lethality at 28 degrees C but not under high-temperature conditions (36 degrees C). Another one (SH line) lost the lethality and survived at 28 degrees C. The cells of LH line showed apoptotic changes when they were cultured at 28 degrees C. Fragmentation of nuclei was correlated with the lethality in the cells, as confirmed by fluorimetry of the nuclear DNA using laser scanning cytometry. Agarose gel analysis of DNA extracted from the cells expressing the lethality revealed a specific ladder pattern suggesting nucleosomal fragmentation that is one of the biochemical characteristics of apoptosis. From these facts, we confirmed that the process of cell death leading to hybrid lethality in the cells is certainly apoptosis. Hybrid cells were used in the experiments to estimate the point of no return in temperature-sensitive lethality and to examine the influence of cation in DNA fragmentation during apoptosis. The utility of hybrid cells as an experimental system for studies of hybrid lethality and apoptosis in plants was confirmed.     

Periodic fluctuations in proliferation of SV-40 transformed human skin fibroblast lines with prolonged lifespan

A human fibroblastic cell line transformed by the SV40-T antigen sequence and continuously cultured for 7 months displayed large periodic variations in cell proliferation. This contrasted with other characteristics of this cell line that remained constant: mosaic cell shape, absence of cell contact inhibition, and predominance of a hypodiploid population. Similar fluctuations in proliferative capacity were also found during the long-term growth of a transformed but nonimmortalized human fibroblastic line prior to senescence, and in the established hamster fibroblastic Nil cell line. This growth pattern suggests a recurrent stimulation of growth in these three transformed cell lines. The proliferation pattern from cultured transformed cells may thus be complex and requires further investigation. These variations presumably influence major cell functions. This observation has important implications for the analysis of data from such cell lines.Abbreviations I-SF immortalized human skin fibroblasts - T-SF transformed human skin fibroblasts - FBS fetal bovine serum     

In vitro expression of cytokeratin 18, 19 and tube formation of adipose‐derived stem cells induced by the breast epithelial cell line HBL‐100

Fat transplantation is increasingly used in breast augmentation; and recently, the issue of safety concerns from a cellular and molecular point of view has been raised. In this study, attentions were paid to the interaction between adipose‐derived stem cells (ADSC) and mammary epithelial cells: human breast cancer cell line ‐ 100 (HBL ‐ 100) cells were used to simulate the normal microenvironment in breast tissue, ADSCs were harvest from human and co‐cultured with HBL‐100 cells. It was found that ADSCs formed tube‐like structures in the co‐culture with HBL‐100 cells in contrast to the normal morphology of ADSCs in the control group. In addition, the immunofluorescence imaging showed that cytokeratin 18 and 19 (CK18 and 19) were significantly expressed in ADSCs after the co‐culture with HBL‐100 cells. The ultrastructure of those ADSCs also showed epithelial changes. In conclusion, ADSCs are not biological stable when co‐cultured with HBL‐100 cells. They differentiate into epithelial‐like cells with the expression of epithelial surface marks (CK 18, 19) and form tube‐like structures. This may offer an important evidence for the further study of clinical application of transplanting ADSCs rich adipose tissue into the breast in the future.     

Cytogenetic activities of tobacco particulate matter (TPM) derived from a low to middle tar British cigarette

Tobacco particulate matter (TPM) derived from an experimental low to middle tar cigarette was tested for its cytogenetic activity upon a low passage number Chinese hamster pulmonary cell line. Examination of the mitotic profiles (after one cell cycle) revealed no interference by the agent with mitotic spindle formation and/or function. However, complete chromosomes (or parts of them) were seen to dislocate from the mitotic spindles. Such an event was probably the result of the chromosome aberrations, substantial numbers of which were observed in second division cells, or through a process of centromere inactivation. In second division cells there was a reduction in the number of diploid cells accompanied by an increase in both hypodiploidy and polyploidy and there was also a non-dose-related increase in endoreduplication. The results demonstrate that TPM was capable of inducing both structural and numerical chromosome aberrations in cultured mammalian cells.