The effects of superficial wax on leaf wettability

Experiments are described which provide more information on the role played by superficial waxes in the natural water-repellency of leaf surfaces. Contact angles of water were measured on a variety of leaf surfaces, before and after removal of wax, and on smooth films of the isolated superficial waxes. The differences in wettability of leaf surfaces are not wholly accounted for by differences which occur in the chemical and hydrophobic properties of their superficial waxes. Waxes isolated from leaves exhibiting contact angles less than 90° are usually more hydrophobic than the leaf surface itself. On most leaves exhibiting angles greater than 90° wax is the dominant factor governing water-repellency, the isolated wax normally making at least a 60 % contribution to the contact angle measured on the leaf surface. Additional factors, such as roughness, responsible for the occurrence of contact angles greater than 110° on certain leaf surfaces, reside in the wax layer. The hydrophobic properties of some leaves are unaffected by chloroform washing, revealing that superficial waxes play little part in their wettability.     

Impact of Drops on Non-wetting Biomimetic Surfaces

We have carried out an experimental study of liquid drop impact on superhydrophobic substrates covered by a carpet ofchemically coated nano-wires.The micro-structure of the surface is similar to some biological ones(Lotus leaf for example).Inthis situation the contact angle can then be considered as equal to 180 degrees,with no hysteresis.Due to its initial inertia,thedrop experiences a flattening phase after it hits the surface,taking the shape of a pancake.Once it reaches its maximal lateralextension,the drop begins to retract and bounces back.We have extracted the lateral extension of the drop,and we propose amodel that explains the trend.We find a limit initial velocity beyond which the drop protrudes into the nano-wire carpet.Wediscuss the relevance of practical issues in terms of self-cleaning surfaces or spray-cooling.     

Towards bioinspired superhydrophobic poly(L-lactic acid) surfaces using phase inversion-based methods

The water repellency and self-cleaning ability of many biological surfaces has inspired many fundamental and practical studies related to the development of synthetic superhydrophobic surfaces. However, the investigation of such substrates made of biodegradable polymers has been scarce. Simple approaches based on a single step, performed at room temperature (and pressure), were implemented to obtain superhydrophobic poly(L-lactic acid) (PLLA) surfaces via phase inversion-based methods, without addition of low-surface-energy compounds. Water contact angles above 150 degrees were obtained using some processing conditions. In such cases scanning electronic microscopy micrographs of such surfaces revealed a clear rough texture composed by leafy clusters with micro-nano binary structures. Such materials could be used in specific environmental and biomedical applications, namely in implantable materials or in antibacterial or antithrombogenic surfaces.     

Super-hydrophobicity fundamentals: implications to biofouling prevention

The theory of wetting on super-hydrophobic surfaces is presented and discussed, within the general framework of equilibrium wetting and contact angles. Emphasis is put on the implications of super-hydrophobicity to the prevention of biofouling. Two main lines of thought are discussed, viz. i) "mirror imaging" of the Lotus effect, namely designing a surface that repels biological entities by being super-hydrophilic, and ii) designing a surface that minimises the water-wetted area when submerged in water (by keeping an air film between the water and the surface), so that the suspended biological entities have a low probability of encountering the solid surface.     

Self-propulsion of dew drops on lotus leaves: a potential mechanism for self cleaning

This study shows that condensation on the hierarchically structured lotus leaf can facilitate self-propulsion of water droplets off the surface. Droplets on leaves inclined at high angles can be completely removed from the surface by self-propulsion with the assistance of gravity. Due to the small size of mobile droplets, light breezes may also fully remove the propelled droplets, which are typically projected beyond the boundary layer of the leaf cuticle. Moreover the self-propelled droplets/condensate were able to remove contaminants (eg silica particles) from the leaf surface. The biological significance of this process may be associated with maintaining a healthy cuticle surface when the action of rain to clean the surface via the lotus effect is not possible (due to no precipitation). Indeed, the native lotus plants in this study were located in a region with extended time periods (several months) without rain. Thus, dew formation on the leaf may provide an alternative self-cleaning mechanism during times of drought and optimise the functional efficiency of the leaf surface as well as protecting the surface from long term exposure to pathogens such as bacteria and fungi.     

Super-hydrophobicity fundamentals: implications to biofouling prevention

Abstract

The theory of wetting on super-hydrophobic surfaces is presented and discussed, within the general framework of equilibrium wetting and contact angles. Emphasis is put on the implications of super-hydrophobicity to the prevention of biofouling. Two main lines of thought are discussed, viz. i) “mirror imaging” of the Lotus effect, namely designing a surface that repels biological entities by being super-hydrophilic, and ii) designing a surface that minimises the water-wetted area when submerged in water (by keeping an air film between the water and the surface), so that the suspended biological entities have a low probability of encountering the solid surface.     

Numerical Study of Wetting Transitions on Biomimetic Surfaces Using a Lattice Boltzmann Approach with Large Density Ratio

The hydrophobicity of natural surfaces has drawn much attention of scientific communities in recent years.By mimicking natural surfaces,the manufactured biomimetic hydrophobic surfaces have been widely applied to green technologies such as self-cleaning surfaces.Although the theories for wetting and hydrophobicity have been developed,the mechanism of wetting transitions between heterogeneous wetting state and homogeneous wetting state is still not fully clarified.As understanding of wetting transitions is crucial for manufacturing a biomimetic superhydrophobic surface,more fundamental discussions in this area should be carried out.In the present work,the wetting transitions are numerically studied using a phase field lattice Boltzmann approach with large density ratio,which should be helpful in understanding the mechanism of wetting transitions.The dynamic wetting transition processes between Cassie-Baxter state and Wenzel state are presented,and the energy barrier and the gravity effect on transition are discussed.It is found that the two wetting transition processes are irreversible for specific inherent contact angles and have different transition routes,the energy barrier exists on an ideally patterned surface and the gravity can be crucial to overcome the energy barrier and trigger the transition.     

Causes and consequences of plant-associated biofilms

The rhizosphere is the critical interface between plant roots and soil where beneficial and harmful interactions between plants and microorganisms occur. Although microorganisms have historically been studied as planktonic (or free-swimming) cells, most are found attached to surfaces, in multicellular assemblies known as biofilms. When found in association with plants, certain bacteria such as plant growth promoting rhizobacteria not only induce plant growth but also protect plants from soil-borne pathogens in a process known as biocontrol. Contrastingly, other rhizobacteria in a biofilm matrix may cause pathogenesis in plants. Although research suggests that biofilm formation on plants is associated with biological control and pathogenic response, little is known about how plants regulate this association. Here, we assess the biological importance of biofilm association on plants.     

Mimicking a Superhydrophobic Insect Wing by Argon and Oxygen Ion Beam Treatment on Polytetrafluoroethylene Film

Biological tiny structures have been observed on many kinds of surfaces such as lotus leaves and insect wings,whichenhance the hydrophobicity of the natural surfaces and play a role of self-cleaning.We presented the fabrication technology of asuperhydrophobic surface using high energy ion beam.Artificial insect wings that mimic the morphology and the superhydrophobocityof cicada’s wings were successfully fabricated using argon and oxygen ion beam treatment on a polytetrafluoroethylene(PTFE)film.The wing structures were supported by carbon/epoxy fibers as artificial flexible veins that were bondedthrough an autoclave process.The morphology of the fabricated surface bears a strong resemblance to the wing surface of acicada,with contact angles greater than 160°,which could be sustained for more than two months.     

The role played by modified bioinspired surfaces in interfacial properties of biomaterials

The success of a biomaterial relies on an appropriate interaction between the surface of that biomaterial and the surrounding environment; more specifically, the success of a biomaterial depends on how fluids, proteins, and cells interact with the foreign material. For this reason, the surface properties of biomaterial, such as composition, charge, wettability, and roughness, must be optimized for a desired application to be achieved. In this review we highlight different bioinspired approaches that are used to manipulate and fine-tune the interfacial properties of biomaterials. Inspired by noteworthy natural processes, researchers have developed materials with a functional anatomy that range from hierarchical hybrid structures to self-cleaning interfaces. In this review we focus on (1) the creation of particles and modified surfaces inspired by the structure and composition of biogenic mineralized tissues, (2) the development of biofunctional coatings, (3) materials inspired by biomembranes and proteins, and (4) the design of superwettable materials. Our intention is to point out different bioinspired methodologies that have been used to design materials for biomedical applications and to discuss how interfacial properties modified by manipulation of these materials determine their final biological response. Our objective is to present future research directions and to highlight the potential of bioinspired materials. We hope this review will provide an understanding of the interplay between interfacial properties and biological response so that successful biomaterials can be achieved.     

Purity of the sacred lotus, or escape from contamination in biological surfaces

The microrelief of plant surfaces, mainly caused by epicuticular wax crystalloids, serves different purposes and often causes effective water repellency. Furthermore, the adhesion of contaminating particles is reduced. Based on experimental data carried out on microscopically smooth (Fagus sylvatica L., Gnetum gnemon L., Heliconia densiflora Verlot, Magnolia grandiflora L.) and rough water-repellent plants (Brassica oleracea L., Colocasia esculenta (L.) Schott., Mutisia decurrens Cav., Nelumbo nucifera Gaertn.), it is shown here for the first time that the interdependence between surface roughness, reduced particle adhesion and water repellency is the keystone in the self-cleaning mechanism of many biological surfaces. The plants were artificially contaminated with various particles and subsequently subjected to artificial rinsing by sprinkler or fog generator. In the case of water-repellent leaves, the particles were removed completely by water droplets that rolled off the surfaces independent of their chemical nature or size. The leaves of N. nucifera afford an impressive demonstration of this effect, which is, therefore, called the “Lotus-Effect” and which may be of great biological and technological importance. Received: 19 August 1996 / Accepted: 12 November 1996     

Evading the 'Lotus Effect'

A micro-relief of wax encrustation or outgrowths of epidermal cells imparts a property to most leaf surfaces which makes them self-cleaning when rain drops pass over them. Fungi, lichens and algae may evade this self-cleaning mechanism and take up residence on the leaf surface.     

Anisotropism of the Non-Smooth Surface of Butterfly Wing

Twenty-nine species of butterflies were collected for observation and determination of the wing surfaces using a ScanningElectron Microscope(SEM).Butterfly wing surface displays structural anisotropism in micro-,submicro- and nano-scales.Thescales on butterfly wing surface arrange like overlapping roof tiles.There are submicrometric vertical gibbosities,horizontallinks,and nano-protuberances on the scales.First-incline-then-drip method and first-drip-then-incline method were used tomeasure the Sliding Angle(SA)of droplet on butterfly wing surface by an optical Contact Angle(CA)measuring system.Relatively smaller sliding angles indicate that the butterfly wing surface has fine self-cleaning property.Significantly differentSAs in various directions indicate the anisotropic self-cleaning property of butterfly wing surface.The SAs on the butterfly wingsurface without scales are remarkably larger than those with scales,which proves the crucial role of scales in determining theself-cleaning property.Butterfly wing surface is a template for design and fabrication ofbiomimetic materials and self-cleaningsubstrates.This work may offer insights into how to design directional self-cleaning coatings and anisotropic wetting surface.     

Characterization and Distribution of Water-repellent, Self-cleaning Plant Surfaces

During the last 20 years, a wealth of data dealing with scanningelectron microscopy of plant surfaces has been published. Theultrastructure of epidermal surfaces has been investigated withrespect to taxonomic, as well as functional aspects. Withinthe latter, water-repellency has received much attention andhas been well documented. Water-repellency is based on surfaceroughness caused by different microstructures (trichomes, cuticularfolds and wax crystals), together with the hydrophobic propertiesof the epicuticular wax. In addition, contaminating particlesare carried away by water droplets, resulting in a cleaned surface(Lotus-effect). Therefore, rough, waxy leaves are not only water-repellentbut anti-adhesive with respect to particulate contamination.Based on 200 water-repellent plant species, the present papersurveys micromorphological characteristics of anti-adhesiveplant surfaces. Leaves that are permanently water-repellentcan be differentiated by distictively convex to papillose epidermalcells and a very dense layer of epicuticular waxes. Leaves thatare water-repellent for only a limited period of time have onlyslightly convex epidermal cells and often have a less densewax layer. Finally, an overview is given on the occurrence ofwater-repellency among different life forms and within differenthabitats. Water-repellency is concentrated in herbaceous species,while it is rare in trees. Among different habitats, subtropicalregions, wetlands and disturbed areas appear to have more specieswith water-repellent leaves. The importance of roughness andwater-repellency, respectively, as the basis of an anti-adhesive,self-cleaning surface, in comparison to other functions of microstructures,is discussed.     

Direct trade-off between cyanogenesis and resistance to a fungal pathogen in lima bean (Phaseolus lunatus L.)

1.  Plants are simultaneously attacked by multiple herbivores and pathogens. While some plant defences act synergistically, others trade-off against each other. Such trade-offs among resistances to herbivores and pathogens are usually explained by the costs of resistance, i.e. resource limitations compromising a plant's overall defence.
2.  Here, we demonstrate that trade-offs can also result from direct negative interactions among defensive traits. We studied cyanogenesis (release of HCN) of lima bean (Fabaceae: Phaseolus lunatus ) and effects of this efficient anti-herbivore defence on resistance to a fungal pathogen (Melanconiaceae: Colletotrichum gloeosporioides ).
3.  Leaf tissue destruction by fungal growth was significantly higher on high cyanogenic (HC) lima bean accessions than on low cyanogenic (LC) plants. The susceptibility of HC accessions to the fungal pathogen was strongly correlated to reduced activity of resistance-associated polyphenol oxidases (PPOs) in leaves of these plants. LC accessions, in contrast, showed high PPO activity, which was correlated with distinct resistance to C. gloeosporioides .
4.  Experimentally applied, gaseous HCN reduced PPO activity and significantly increased the size of lesions caused by C. gloeosporioides in LC leaves.
5.  Field observations of a wild lima bean population in Mexico revealed a higher infection rate of HC compared to LC plant individuals. The types of lesions observed on the different cyanogenic plants in nature were similar to those observed on HC and LC plants in the laboratory.
6.   Synthesis. We suggest that cyanogenesis of lima bean directly trades off with plant defence against fungal pathogens and that the causal mechanism is the inhibition of PPOs by HCN. Our findings provide a functional explanation for the observed phenomenon of the low resistance of HC lima beans in nature.     

Comparative phylogenetic analysis of small GTP-binding genes of model legume plants and assessment of their roles in root nodules

Small GTP-binding genes play an essential regulatory role in a multitude of cellular processes such as vesicle-mediated intracellular trafficking, signal transduction, cytoskeletal organization, and cell division in plants and animals. Medicago truncatula and Lotus japonicus are important model plants for studying legume-specific biological processes such as nodulation. The publicly available online resources for these plants from websites such as http://www.ncbi.nih.gov, http://www.medicago.org, http://www.tigr.org, and related sites were searched to collect nucleotide sequences that encode GTP-binding protein homologues. A total of 460 small GTPase sequences from several legume species including Medicago and Lotus, Arabidopsis, human, and yeast were phyletically analysed to shed light on the evolution and functional characteristics of legume-specific homologues. One of the main emphases of this study was the elucidation of the possible involvement of some members of small GTPase homologues in the establishment and maintenance of symbiotic associations in root nodules of legumes. A high frequency of vesicle-mediated trafficking in nodules led to the idea of a probable subfunctionalization of some members of this family in legumes. As a result of the analyses, a group of 10 small GTPases that are likely to be mainly expressed in nodules was determined. The sequences determined as a result of this study could be used in more detailed molecular genetic analyses such as creation of RNA interference silencing mutants for further clarification of the role of GTPases in nodulation. This study will also assist in furthering our understanding of the evolutionary history of small GTPases in legume species.     

Divergence of evolutionary ways among common sym genes: CASTOR and CCaMK show functional conservation between two symbiosis systems and constitute the root of a common signaling pathway

In recent years a number of legume genes involved in root nodule (RN) symbiosis have been identified in the model legumes, Lotus japonicus (Lotus) and Medicago truncatula. Among them, a distinct set of genes has been categorized as a common symbiosis pathway (CSP), because they are also essential for another mutual interaction, the arbuscular mycorrhiza (AM) symbiosis, which is evolutionarily older than the RN symbiosis and is widely distributed in the plant kingdom. Based on the concept that the legume RN symbiosis has evolved from the ancient AM symbiosis, one issue is whether the CSP is functionally conserved between non-nodulating plants, such as rice, and nodulating legumes. We identified three rice CSP gene orthologs, OsCASTOR, OsPOLLUX and OsCCaMK, and demonstrated the indispensable roles of OsPOLLUX and OsCCaMK in rice AM symbiosis. Interestingly, molecular transfection of either OsCASTOR or OsCCaMK could fully complement symbiosis defects in the corresponding Lotus mutant lines for both the AM and RN symbioses. Our results not only provide a conserved genetic basis for the AM symbiosis between rice and Lotus, but also indicate that the core of the CSP has been well conserved during the evolution of RN symbiosis. Through evolution, CASTOR and CCaMK have remained as the molecular basis for the maintenance of CSP functions in the two symbiosis systems.     

Defense Responses in Two Ecotypes of Lotus japonicus against Non-Pathogenic Pseudomonas syringae

Lotus japonicus is a model legume broadly used to study many important processes as nitrogen fixing nodule formation and adaptation to salt stress. However, no studies on the defense responses occurring in this species against invading microorganisms have been carried out at the present. Understanding how this model plant protects itself against pathogens will certainly help to develop more tolerant cultivars in economically important Lotus species as well as in other legumes. In order to uncover the most important defense mechanisms activated upon bacterial attack, we explored in this work the main responses occurring in the phenotypically contrasting ecotypes MG-20 and Gifu B-129 of L. japonicus after inoculation with Pseudomonas syringae DC3000 pv. tomato. Our analysis demonstrated that this bacterial strain is unable to cause disease in these accessions, even though the defense mechanisms triggered in these ecotypes might differ. Thus, disease tolerance in MG-20 was characterized by bacterial multiplication, chlorosis and desiccation at the infiltrated tissues. In turn, Gifu B-129 plants did not show any symptom at all and were completely successful in restricting bacterial growth. We performed a microarray based analysis of these responses and determined the regulation of several genes that could play important roles in plant defense. Interestingly, we were also able to identify a set of defense genes with a relative high expression in Gifu B-129 plants under non-stress conditions, what could explain its higher tolerance. The participation of these genes in plant defense is discussed. Our results position the L. japonicus-P. syringae interaction as a interesting model to study defense mechanisms in legume species.     

植物微流芯片——一种实时定量监测生长发育的 高通量整合分析平台

生长发育是一个复杂的动态过程, 了解其发生细节是生命科学研究的重要内容。最新发展起来的微流芯片技术为实现这个目标提供了新的途径。动物及微生物中的应用表明, 该技术兼有实时定量监测和高通量整合处理的优势。在植物研究领域, 用针对根生长特点和要求设计的根微流芯片结合荧光共振能量转移探针已经成功地检测出拟南芥(Arabidopsis thaliana)根细胞内葡萄糖和游离的Ca²⁺、Zn²⁺的浓度。随着各种底物特异的荧光共振能量转移探针的开发和应用, 根微流芯片还可以用来检测植物细胞内激素或其它代谢中间产物的浓度及其动态变化过程。不仅如此, 以微流芯片为基础发展起来的Plant Chip和Tip Chip则为研究植物与微生物的相互作用以及植物花粉管极性生长和细胞分裂分化提供了理想的平台。作为了解遗传因素或环境刺激导致细胞生命活动变化细节的有力工具, 微流芯片技术有望为植物研究领域带来更多新的进展和突破。