Essential genes of plasmid RK2 in Escherichia coli: trfB region controls a kil gene near trfA.

Plasmid RK2 encodes several kil determinants whose lethal action on Escherichia coli host cells is prevented by RK2 kor genes. Here we show that the mini-RK2 plasmid, pRK248, specifies a kilB component (kilB1) in the region of the replication gene trfA. kilB1 is different from trfA and is completely encoded within the pRK248 HaeII A fragment. Transformation of E. coli cells with hybrid plasmids containing the cloned kilB1 determinant is very inefficient and results in the selection of variant kil- plasmids, many of which show genetic and physical evidence of deletions. If another pRK248 gene (korB1) is present in the cells, kilB1+ plasmids can be established at high efficiency and without any detectable changes. KorB1 is encoded by the trfB region of pRK248 because recombinant plasmids with this region are able to control kilB1 in trans. These results substantiate our earlier explanation for the structure of pRK248 and for the perplexing requirement of the trfB region in this plasmid.     

Analysis of Agrobacterium tumefaciens plasmid pTiC58 replication region with a novel high-copy-number derivative.

The origin of replication, ori, of the nopaline tumor-inducing plasmid, pTiC58, mapped in a region that shares sequence homology with octopine plasmids pTiAch5 and pTiB6. Within this region, the minimum amount of DNA necessary for maintaining autonomous replication was a 2.6-kilobase region, which also comprised the incompatibility function inc. pTiC58 derivatives containing inc were incompatible with Agrobacterium tumefaciens plasmids pTiC58, pTiD1439, pTiAch5, pTi15955, and pTiA5 and were compatible with A. rhizogenes plasmid pRi12. Situated adjacent to the origin region was a 1.5-kilobase par segment involved in stable inheritance of pTiC58 under nonselective growth conditions. When par was present, plasmid maintenance approached that of the wild-type pTiC58. Rapid loss from the cell population was observed for plasmids not containing this locus. Another 1.5-kilobase region, cop, positively regulated pTiC58 copy number, enabling certain pTiC58 derivatives to exist at a copy number up to 80 times higher than that of wild-type pTiC58. Deletions within the cop locus resulted in reduced copy number. The ori/inc regions were flanked on either side by the par and cop loci.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

Genetic and heteroduplex analysis of deletion mutants of plasmid pAS8]

Heteroduplex analysis of deletion mutants of plasmid pAS8 permitted to construct a physical map and to elaborate in greater detail the genetic map of RP4 plasmid. The correlation between the ability of mutants to replicate in cells lacking functional DNA-polymerase I and the length of the deleted segment permitted to map rep genes of RP4 on DNA region with coordinates 9.8-17.3 kb. A relationship between the manifestation of incompatibility of mutants with IncP-1 plasmids and the length of deletions indicates that inc genes(s) are located on DNA region with coordinates 2.1-9.8 kb. The analysis of replication of deletion mutants and the manifestation of incompatibility just as of the data about the size of appropriate deletions permitted to make the conclusion about the functional and genetic non-identity of the replication control and incompatibility control in RP4 plasmid. Different degrees of incompatibility manifested by different plasmids suggest a possible polygenic control of the incompatibility.     

Relationship of the replication and incompatibility genes of an IncFVI haemolysin plasmid with other F-like haemolysin plasmids

The replication and incompatibility region of the IncFVI plasmid pSU502 has been isolated by in vitro DNA manipulation as part of a 12.6 kb plasmid, denominated pSU503. Plasmid pSU503 was strongly incompatible with its parental plasmid, pSU1, but was fully compatible with the haemolytic plasmids pSU316 (IncFIII/IV), pHly152 (IncI2) and pSU233 (Inc-pSU233). Furthermore, the 6.9 kb EcoRI fragment of pSU503 which carries the replication and incompatibility determinants of pSU1 did not show any detectable homology (less than 70%) with any of the haemolysin-determining plasmids with which it is compatible. Thus, homologous haemolysin determinants have become linked to apparently unrelated replicons.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Plasmid pSC101 replication mutants generated by insertion of the transposon Tn1000

A derivative of pSC101, pLC709, was constructed by ligation of the HincII-A fragment of pSC101 to the mini-colEI plasmid pVH51 and to a DNA fragment encoding resistance to the antibiotics streptomycin and spectinomycin. Insertions of the transposon Tn1000 (gamma-delta) into the pSC101 replication region of pLC709 were isolated following cotransfer of the plasmid with the sex factor F. The sites of insertion of the transposon were determined by restriction enzyme analysis and the replication and incompatibility properties of the insertion plasmids and DNA fragments cloned from them were analysed. The insertion mutations defined a locus, inc, of approximately 200 base-pairs that is responsible for pSC101-specific incompatibility. Two mutations adjacent to this region inactivate pSC101 replication but can be complemented in trans by a wild-type pSC101 plasmid, and thus define a trans-acting replication function, rep. The inc locus is within a larger region of some 450 base-pairs that is essential for pSC101 replication and that includes the origin of replication. This 450 base-pair segment can replicate in the presence of a helper plasmid that supplies the rep function in trans.     

Molecular homology and incompatibility in the IncFI plasmid Group

The usual grounds for the inclusion of a plasmid in a particular incompatibility group are its mutual incompatibility with a type plasmid of that group, and, in some cases, the demonstration of shared regions of specific homology, presumed to be related to DNA replication. We have found that some plasmids classified as IncFI on genetical grounds share no homology with the previously described incompatibility regions of F on the basis of hybridization of specific radioactive probes to restriction enzyme digests of DNA from these plasmids. Others show homology with some or all of the regions of the F plasmid that can express incompatibility. The incompatibility behaviour of these plasmids has been examined to determine the relationship between the possession of regions of homology and the expression of incompatibility. Three plasmids, ColV3-K30, pHH507 and Entp307, show homology only with the secondary replicon of F and appear to use sequences homologous with the secondary F replicon in their replication. The results are consistent with the propositions that some contemporary IncFI plasmids arose by the integration of several replicons, and, in general, the replicon not being used for replicon expresses its incompatibility, as does the replicon being used for replication. We conclude that incompatibility of two plasmids with F does not necessarily demonstrate relatedness of the plasmids to each other, and that inclusion within the IncFI group can result from the possession of any of several combinations of inc sequences.     

The Inc3B determinant of plasmid pT181

Summary A region encompassing the origin of replication of staphylococcal plasmid pT181 has previously been shown to express an incompatibility effect denoted Inc3B, when cloned into another replicon (Novick et al. 1984). In an attempt to understand the mechanism of this incompatibility effect, and its relationship with the function of the replication origin, mutants deficient in this property were isolated and characterized. The results obtained suggest that the Inc3B effect is due to the competition for replication between the replication origin cloned in a hybrid and the origin of an autonomous plasmid. The Inc3B-deficient mutants isolated expressed different degrees of residual incompatibility. The inc3B mutations which did not express any incompatibility were found also to inactivate the function of the replication origin. All the other mutants which expressed residual Inc3B had a functional origin but presented a significantly reduced ability to use this origin when coexisting with a plasmid using a wild-type pT181 origin. It is suggested that these inc3B mutations represent a new type of origin mutation which affects the ability of the origin to compete with other origins using the same replication system, though the function per se of the origin is not significantly impaired.     

Structural-functional organization of R-plasmid pBS222 with a broad range of bacterial hosts

The broad host-range plasmid pBS222 is compatible with broad host-range plasmids of all known incompatibility groups and codes for tetracycline resistance. pBS222 is efficiently mobilized by Inc P-1 plasmid RP4 and is also capable of conjugal transfer with low efficiency to different gramnegative microorganisms. The size of the plasmid (17.2 Kb) has been determined and its physical map has been constructed. The plasmid harbours the unique sites for restriction endonucleases BglII, HindIII, HpaI, KpnI, SmaI and XbaI cleawage. The plasmid derivatives pBS352-pBS355 have been obtained that carry kan- and cam-determinants in addition to tet-gene. Plasmid pBS355 has been used to clone EcoRI-fragments of phage lambda DNA. The plasmid pBS222 regions essential for replication and maintenance have been localized by DNA hybridization analysis of its mini-derivatives pBS356 and 357. pBS222 is a convenient model for investigations of the plasmid replication and maintenance mechanisms in different bacterial hosts as well as for the construction of broad host-range vectors.     

Structural and functional analysis of cloned DNA segments containing the replication and incompatibility regions of a miniplasmid derived from a copy number mutant of NR1.

A 1.45-megadalton segment of DNA cloned from a miniplasmid derived in vivo from a copy number mutant of the R plasmid NR1 has been shown to contain all functions essential for incompatibility and autonomous plasmid replication in Escherichia coli. Specific endonuclease cleavage sites within this DNA segment that localize functions required for replication have been mapped. A 0.45-megadalton fragment that specifies the FII incompatibility of NR1 has been identified within the replication region, and DNA fragments containing this incompatibility region, but lacking other functions required for replication, have been cloned.     

The nucleotide sequence of a DNA fragment from the replication origin of the antibiotic resistance factor R1drd19

Summary The recombinant plasmid pRK101 contains a DNA fragment which carries the complete replication origin of the antibiotic resistance factor R1drd-19 inserted into the vector plasmid pBR322. In a spontaneously arising mutant of this plasmid (pRK 103) a deletion of about 215 base pairs (bp) has been detected by heteroduplex analysis and mapping with restriction endonucleases. Essential parts of the replication origin must be located in the deleted sequence. The deletion mutant pRK103, in contrast to its parent plasmid pRK101 is not replicated under the control of the R1 replicon, even when the R1 factor or copy mutants of it are present within the same cell. These latter plasmids can complement a plasmid-specific protein not coded by pRK101 but essential for R1-directed replication. The nucleotide sequence of a 252 bp HpaII fragment covering about 170–200 bp of the deletion was determined. This piece of DNA is rich in G and C and contains a series of small palindromes, symmetrically arranged repeated sequences and short selfcomplementary structures which may be of significance for the initiation of the DNA replication. The possibility that the sequenced DNA fragment comprises a major part of the replication origin of R1drd-19 is discussed.     

Comparative analysis of the organization of the NPL-1 plasmid controlling naphthalene oxidation in Pseudomonas putida and its derivatives

The paper contains the data on the structure of NPL-1 plasmid controlling naphthalene biodegradation. The plasmid which pertains to the P-9 incompatibility group is transferrable conjugatively and is maintained stably within a wide range of gram-negative bacteria. The analysis of mutants and transposon derivatives of the plasmid made it possible to localize nah-genes in a DNA fragment, 23 kb in size. An inverted DNA segment of 4.2 kb was discovered which may participate in the regulation of nah-genes expression. The other peculiar features of NPL-1 were found distinguishing it from NAH and NAH7 plasmids described in literature.     

Control of plasmid incompatibility: characteristics of the bireplicon hybrid pAS8 and its deletion mutants]

The phenomenon of incompatibility has been investigated using deletion mutants of hybrid bireplicon plasmid pAS8. The hybrid pAS8 displays incompatibility specific for both components of its structure. In contrast to P-specificity of pAS8, functions of ColE1-specificity are not effectively expressed. Expression of ColE1-specificity in pAS8 plasmid and its derivatives is characterized by different directions and this is due to the presence or absence of genes of RP4 replication machinery in the plasmid DNA. Mutant plasmids show different efficiency of P-specificity depending on the extension of deletion in the region of essential genes of the RP4 component. Some of the mutants, in spite of the loss of replication genes, including origin of vegetative replication, are incompatible with the representatives of the Inc P group in both directions of testing. Different character and the level of expression of ColE1- and P-specificity in the pAS8 hybrid and its deletion derivatives are not associated with change in the number of plasmid DNA copies, for all of them are subjects to stringent control of replication. The data suggest the existence of incompatibility functions control mechanism which does not seem to include replication genes. Possible ways of realization of the inc genes functions are discussed.     

Re-examination of the ColE1 DNA regions essential for autonomous replication and their functions

Starting from pAO3, a plasmid consisting of a quarter of colicinogenic factor E1 (ColE1) DNA, various small ColE1 derivatives were constructed by in vitro recombination and their ability to achieve autonomous replication was examined. The 436 base pair HaeIII-C fragment of pAO3 contained information for replication when it was recombined with the non-replicating Amp fragment. However, when it was connected to other DNA fragments, the resulting hybrid molecules were not isolated as plasmids. The present results indicate that the additional region of about 240 base pairs next to the HaeIII-C fragment of ColE1 is also essential for the maintenance of a plasmid state. Moreover, using various small ColE1 derivatives, the DNA region responsible for the interference and incompatibility functions of ColE1 DNAs was located. The results indicate that the interference and incompatibility functions are coded by the same ColE1 DNA segment and are not essential for the maintenance of a plasmid state.     

Genetic analysis of the inter-relationship between plasmid replication and incompatibility

Summary The relationship between replication control and plasmid incompatibility has been investigated using a composite replicon, pPM1, which consists of the pSC101 plasmid ligated to another small multicopy plasmid, RSF1050. Since pPM1 can utilise the replication system of either of the two functionally distinct components, propagation of the composite plasmid can occur in the presence of a mutation of one of its moieties. Such mutants are detected by their inability to rescue the composite plasmid under conditions not permissive for replication of the other moiety. Mutations in incompatibility functions can be detected by the failure of the composite replicon to exclude co-existing plasmids carrying a replication system identical to the one on pPM1.The inability of the composite plasmid to replicate at 42° in a host synthesizing temperature-sensitive DNA polymerase I, which is required by the RSF1050 replication system, was used to isolate pPM1 mutants defective in replication of the pSC101 component. Mutants defective in the incompatibility functions of pSC101 were obtained by selecting derivatives that allow the stable coexistence of a second pSC101 replicon in the same cell. Analysis of these two classes of mutants indicates that plasmids selected for defective pSC101 replication ability nevertheless retain pSC101 incompatibility. In contrast, plasmid mutants that have lost incompatibility functions were found always to be defective in replication ability.     

Nucleotide Sequence and Genetic Characterization of the Novel IncQ-like Plasmid pIE1107

The analysis of the complete nucleotide sequence of the small resistance plasmid pIE1107 revealed a close similarity to the well-known IncQ plasmids. Highly conserved replication proteins and nearly identical origins of replication (oriV) suggest equivalent functions in the related replication systems. However, pIE1107 contains two copies of IncQ-oriV-like DNA which are slightly different regarding the iterons. Upon deletion of a silent copy of IncQ-oriV-like DNA the resulting plasmid is fully compatible with IncQ plasmids, indicating that there is no mutual communication between the replication control of the respective replicons. Experiments with clonedoriV DNA strongly suggest that the replication initiation protein of pIE1107 has specialized into the distinct target-iterons of its ownoriV which differs only by a few nucleotides from theoriV of IncQ plasmids. Implications from the apparent highly specific protein–DNA recognition and from the incompatibility properties of pIE1107 for the evolution of a family of compatible, IncQ-like plasmids are discussed.     

DNA environment of the aerobactin iron uptake system genes in prototypic ColV plasmids.

The aerobactin iron uptake system genes in the prototypic plasmid pColV-K30 are flanked by inverted copies of insertion sequence IS1 and by two distinct replication regions. To address the question of how these flanking regions may facilitate the maintenance and spread of the aerobactin system among the plasmids and chromosomes of enteric species, we investigated the DNA environment of 12 ColV plasmids. We found that the aerobactin system-specific genes are conserved in every plasmid phenotypically positive for the aerobactin system. The upstream IS1 and its overlapping replication region (REPI) are also conserved. This replication region was cloned from several ColV plasmids and found to be functional by transforming these cloned derivatives into a polA bacterial host. In contrast, the downstream flanking region is variable. This includes the downstream copy of IS1 and the downstream replication region (REPII). We infer from these results that sequences in addition to the two flanking copies of IS1, in particular the upstream region including REPI, have been instrumental in the preservation and possible spread of aerobactin genes among ColV plasmids and other members of the FI incompatibility group.     

Mapping of RP4 plasmid using deletion mutants of pAS8 hybrid (RP4-ColE1)

Summary We used the hybrid plasmid pAS8 in order to conduct the genetic analysis of RP4 plasmid. The presence of two replicons in the hybrid plasmid permitted to expand the spectrum of deletion mutants of RP4 isolated, which are capable to autonomous replication. The shortening of the hybrid plasmid was achieved by P22 transduction, by induction of deletion mutants using mitomycin C, as well as by selection of Tra^- mutants on the basis of resistance of cells to P-specific phages. These techniques have lead to isolation of clones possessing different combinations of plasmid resistance determinants.Comparison of phenotypic characteristics of deletion plasmids pAS9, pAS10, pAS11, pAS12 and pAS10-2 permitted to propose the map for pAS8 plasmid with the following sequence of markers: trakan-ColE1-amp-tet...Heteroduplex analysis of deletion mutants of pAS8 permitted to construct a physical map and to elaborate in greater detail the functional map of RP4 plasmid. The correlation between the ability of mutants to replicate in polA (TS) strain at nonpermissive conditions and the length of the deleted segment permitted to map rep genes of RP4 on a region with coordinates 9.8–17.3 kb. A relationship between the manifestation of incompatibility of mutants with Inc P-1 plasmids and the length of deletions points out that inc genes are located on DNA region with coordinates 2.1–9.8 kb. The analysis of replication of deletion mutants and the manifestation of incompatibility just as of the data about the size of appropriate deletions permitted to make the conclusion about the functional and genetic independence of the replication control and incompatibility control in RP4 plasmid.