Amplification of bacterial genomic DNA by the polymerase chain reaction and direct sequencing after asymmetric amplification: application to the study of periplasmic permeases.

The polymerase chain reaction (PCR) has been used to amplify DNA fragments by using eucaryotic genomic DNA as a template. We show that bacterial genomic DNA can be used as a template for PCR amplification. We demonstrate that DNA fragments at least as large as 4,400 base pairs can be amplified with fidelity and that the amplified DNA can be used as a substrate for most operations involving DNA. We discuss problems inherent in the direct sequencing of the amplified product, one of the important exploitations of this methodology. We have solved the problems by developing an "asymmetric amplification" method in which one of the oligonucleotide primers is used in limiting amounts, thus allowing the accumulation of single-stranded copies of only one of the DNA strands. As an illustration of the use of PCR in bacteria, we have amplified, sequenced, and subcloned several DNA fragments carrying mutations in genes of the histidine permease operon. These mutations are part of a preliminary approach to studying protein-protein interactions in transport, and their nature is discussed.     

Blocking primers to enhance PCR amplification of rare sequences in mixed samples – a case study on prey DNA in Antarctic krill stomachs

Background

Identification of DNA sequence diversity is a powerful means for assessing the species present in environmental samples. The most common molecular strategies for estimating taxonomic composition depend upon PCR with universal primers that amplify an orthologous DNA region from a range of species. The diversity of sequences within a sample that can be detected by universal primers is often compromised by high concentrations of some DNA templates. If the DNA within the sample contains a small number of sequences in relatively high concentrations, then less concentrated sequences are often not amplified because the PCR favours the dominant DNA types. This is a particular problem in molecular diet studies, where predator DNA is often present in great excess of food-derived DNA.

Results

We have developed a strategy where a universal PCR simultaneously amplifies DNA from food items present in DNA purified from stomach samples, while the predator's own DNA is blocked from amplification by the addition of a modified predator-specific blocking primer. Three different types of modified primers were tested out; one annealing inhibiting primer overlapping with the 3' end of one of the universal primers, another annealing inhibiting primer also having an internal modification of five dI molecules making it a dual priming oligo, and a third elongation arrest primer located between the two universal primers. All blocking primers were modified with a C3 spacer. In artificial PCR mixtures, annealing inhibiting primers proved to be the most efficient ones and this method reduced predator amplicons to undetectable levels even when predator template was present in 1000 fold excess of the prey template. The prey template then showed strong PCR amplification where none was detectable without the addition of blocking primer. Our method was applied to identifying the winter food of one of the most abundant animals in the world, the Antarctic krill, Euphausia superba. Dietary item DNA was PCR amplified from a range of species in krill stomachs for which we had no prior sequence knowledge.

Conclusion

We present a simple, robust and cheap method that is easily adaptable to many situations where a rare DNA template is to be PCR amplified in the presence of a higher concentration template with identical PCR primer binding sites.     

New insights into the QuikChangeTM process guide the use of Phusion DNA polymerase for site-directed mutagenesis

The QuikChange^TM site-directed mutagenesis method is popular but imperfect. An improvement by using partially overlapping primers has been reported several times; however, it is incompatible with the proposed mechanism. The QuikChange^TM method using complementary primers is proposed to linearly amplify a target plasmid with the products annealing to produce double-stranded DNA molecules with 5′-overhangs. The overhang annealing is supposed to form circular plasmids with staggered breaks, which can be repaired in Escherichia coli after transformation. Here, we demonstrated that the PCR enzyme fills the 5′-overhangs in the early cycles, and the product is then used as the template for exponential amplification. The linear DNA molecules with homologous ends are joined to generate the plasmid with the desired mutations through homologous recombination in E. coli. The correct understanding is important to method improvements, guiding us to use partially overlapping primers and Phusion DNA polymerase for site-directed mutagenesis. Phusion did not amplify a plasmid with complementary primers but used partially overlapping primers to amplify the plasmid, producing linear DNA molecules with homologous ends for site-directed mutagenesis.     

MAAP: a versatile and universal tool for genome analysis

Multiple arbitrary amplicon profiling (MAAP) uses one or more oligonucleotide primers (5 nt) of arbitrary sequence to initiate DNA amplification and generate characteristic fingerprints from anonymous genomes or DNA templates. MAAP markers can be used in general fingerprinting as well as in mapping applications, either directly or as sequence-characterized amplified regions (SCARs). MAAP profiles can be tailored in the number of monomorphic and/or polymorphic products. For example, multiple endonuclease digestion of template DNA or the use of mini-hairpin primers can enhance detection of polymorphic DNA. Comparison of the expected and actual number of amplification products produced with primers differing in length, sequence and GC content from templates of varying complexity reveal severe departures from theoretical formulations with interesting implications in primer-template interaction. Extensive primer-template mismatching can occur when using templates of low complexity or long primers. Primer annealing and extension appears directed by an 8 nt 3-terminal primer domain, requires sites with perfect homology to the first 5–6 nt fom the 3 terminus, and involves direct physical interaction between amplicon annealing sites.     

Primase-based whole genome amplification

In vitro DNA amplification methods, such as polymerase chain reaction (PCR), rely on synthetic oligonucleotide primers for initiation of the reaction. In vivo, primers are synthesized on-template by DNA primase. The bacteriophage T7 gene 4 protein (gp4) has both primase and helicase activities. In this study, we report the development of a primase-based Whole Genome Amplification (pWGA) method, which utilizes gp4 primase to synthesize primers, eliminating the requirement of adding synthetic primers. Typical yield of pWGA from 1 ng to 10 ng of human genomic DNA input is in the microgram range, reaching over a thousand-fold amplification after 1 h of incubation at 37 degrees C. The amplification bias on human genomic DNA is 6.3-fold among 20 loci on different chromosomes. In addition to amplifying total genomic DNA, pWGA can also be used for detection and quantification of contaminant DNA in a sample when combined with a fluorescent reporter dye. When circular DNA is used as template in pWGA, 10(8)-fold of amplification is observed from as low as 100 copies of input. The high efficiency of pWGA in amplifying circular DNA makes it a potential tool in diagnosis and genotyping of circular human DNA viruses such as human papillomavirus (HPV).     

DNA sequences from multiple amplifications reveal artifacts induced by cytosine deamination in ancient DNA

We show that DNA molecules amplified by PCR from DNA extracted from animal bones and teeth that vary in age between 25 000 and over 50 000 years carry C→T and G→A substitutions. These substitutions can reach high proportions among the molecules amplified and are due to the occurrence of modified deoxycytidine residues in the template DNA. If the template DNA is treated with uracil N-glycosylase, these substitutions are dramatically reduced. They are thus likely to result from deamination of deoxycytidine residues. In addition, ‘jumping PCR’, i.e. the occurrence of template switching during PCR, may contribute to these substitutions. When DNA sequences are amplified from ancient DNA extracts where few template molecules initiate the PCR, precautions such as DNA sequence determination of multiple clones derived from more than one independent amplification are necessary in order to reduce the risk of determination of incorrect DNA sequences. When such precautionary measures are taken, errors induced by damage to the DNA template are unlikely to be more frequent than ~0.1% even under the unlikely scenario where each amplification starts from a single template molecule.     

Primer-template interactions during DNA amplification fingerprinting with single arbitrary oligonucleotides

Summary DNA amplification fingerprinting (DAF) is the enzymatic amplification of arbitrary stretches of DNA which is directed by very short oligonucleotide primers of arbitrary sequence to generate complex but characteristic DNA fingerprints. To determine the contribution of primer sequence and length to the fingerprint pattern and the effect of primer-template mismatches, DNA was amplified from several sources using sequence-related primers. Primers of varying length, constructed by removing nucleotides from the 5 terminus, produced unique patterns only when primers were 8 nucleotides or fewer in length. Larger primers produced either identical or related fingerprints, depending on the sequence. Single base changes within this first 8-nucleotide region of the primer significantly altered the spectrum of amplification products, especially at the 3 terminus. Increasing annealing temperatures from 15° to 70° C during amplification did not shift the boundary of the 8-nucleotide region, but reduced the amplification ability of shorter primers. Our observations define a 3-terminal oligonucleotide domain that is at least 8 bases in length and largely conditions amplification, but that is modulated by sequences beyond it. Our results indicate that only a fraction of template annealing sites are efficiently amplified during DAF. A model is proposed in which a single primer preferentially amplifies certain products due to competition for annealing sites between primer and terminal hairpin loop structures of the template.     

A novel and rapid cloning method for the T-cell receptor variable region sequences

Conventional polymerase chain reactions (PCR) require sequence information on both ends of the DNA to be amplified. The novel technique described here allows the amplification of cDNA fragments with sequence information from one end only. Blunt-ended double-strand cDNA is prepared, circularized with T4 DNA ligase and used as a PCR template. The two PCR primers are desinged to hybridize to the known region in an outward orientation allowing the amplification of the unknown sequence. The method was established using the -chain of T-cell antigen receptors (Tcr) as an example. The cDNA synthesized from 1 g of total RNA from human peripheral lymphocytes was amplified and cloned resulting in a library of 1–2 × 10⁶ Tcr-specific clones. The method should also be useful for cloning full-length cDNA or for the identification of new members of a gene family that share a conserved domain.     

A novel PCR-mediated method for one-tube generation of a gene disruption construct

A novel PCR-based method is reported for generating a gene disruption construct which requires no purification of PCR fragments and enables the whole procedure to be completed in one tube very rapidly. The procedure starts with PCR amplification of both the 5 and 3 regions of a particular gene in one tube. Then, exonuclease I is added to the tube to remove the residual primers. After heat inactivation of the enzyme, a marker cassette DNA fragment is added and fusion PCR is performed to build up a gene disruption construct. The gene disruption construct is subsequently amplified with the outermost primers in the amount necessary for transformation. In order to distinguish the gene disruption construct from the remaining intact gene allele, the outermost primers are designed to have GC-rich tag sequences that anneal at a higher temperature, ensuring the specific amplification of the gene disruption construct.     

Detection of a specifically amplified DNAfragment in Brucella abortus by arbitrarilyprimed polymerase chain reaction

Randomly amplified polymorphic DNA (RAPD) profiles of Brucella and non-Brucella DNA were established after polymerase chain reaction (PCR) amplification. Five arbitrary oligonucleotide primers were screened to generate Brucella-specific DNA fingerprints. The arbitrary primer OPB-01 (5-GTTTCGCTCC-3) produced DNA bands specific to Brucella. Amplification conditions must be optimized for reproductibility. Accordingly, we optimized and established the conditions, which included Mg²⁺, enzyme (DNA polymerase), primer, template and deoxyribonucleoside triphosphate (dNTP) concentrations as well as the optimum number of thermal cycles to produce OPB-01 directed Brucella DNA fingerprints.The optimized RAPD method can produce a 1.3 kb DNA fragment specific to Brucella. This DNA fragment was common to eight biovars of B. abortus and one biovar of B. melitensis. The fragment was not detected in genetically related species such as Ochrobactrum anthropi and other non-Brucella organisms associated with farm animals. We anticipate the use of this fragment as a possible probe for the detection of Brucella organisms.     

Interrogation of multimeric DNA amplification products by competitive primer extension using bst DNA polymerase (large fragment).

Linear dsDNA composed of tandem repeats may be exponentially amplified by the strongly strand-displacing Bst DNA polymerase (large fragment) and two primers specific for opposite strands. When the repetitive DNA is derivedfrom rolling circle replication of a circular template, the reaction is termed cascade rolling circle amplification (CRCA). We have developed a variant of CRCA in which one primer is attached to the surface of a microwell and the other is labeled, thus enabling detection of amplified material using an ELISA-like protocol. The circular template is derived by annealing and ligation of a padlock on target DNA. It was found that there was good correlation between the synthesis of amplified material and signal. The specificity of the reaction with respect to single-nucleotide polymorphisms was investigated, and it was found that Bst DNA polymerase is prone to extension from primers with mismatched 3' ends. Reliable single nucleotide specificity was only obtained when pre-synthesized amplified material was interrogated by competitive primer extension.     

In vitro studies on the role of phage T7 gene 4 product in DNA replication

Summary A soluble enzyme fraction prepared from T7-infected E. coli is able to initiate DNA synthesis on circular single-stranded phage DNA. The product synthesized in vitro is a full-length linear complementary strand as judged by alkaline sucrose gradient analysis. DNA synthesis requires the products of the phage genes 4 and 5, Mg⁺⁺, dNTPs and rNTPs; however, ATP by itself can almost completely satisfy the rNTP requirement. The gene 4 product is essential for DNA chain initiation on unprimed single-stranded DNA, but is dispensable for the replication of a X174 DNA-RNA hybrid. The enzyme system from T7-infected cells does not discriminate between the DNA templates from phages X174, M13 or fd and is also capable of replicating native T7 DNA. However, a striking difference with regard to the template DNA is revealed by complementation analysis. Extracts of T7 mutant-infected cells complement each other only with T7 DNA but not with X174 DNA as template.Abbreviations rNTP ribonucleoside triphosphate - dNTP deoxyribonucleoside triphosphate - BSA bovine serum albumin     

Amplification of closed circular DNA in vitro.

The polymerase chain reaction is a powerful technique used to amplify nucleic acids in vitro . The reaction produces linear products, and as of yet, closed circular products have not been possible. Since the replicatively competent form of many DNA molecules is the closed circular form, it would be adventitious to amplify closed circular DNA as closed circular molecules. Until now, these molecules could only be amplified in vivo in appropriate host cells. Here, we describe an in vitro procedure, ligation-during-amplification (LDA), for selective amplification of closed circular DNA using sequence-specific primers. LDA is useful for site-directed mutagenesis, mutation detection, DNA modification, DNA library screening and circular DNA production.     

The nature of initiation sites on DNA for the core RNA polymerase

Summary The biological significance of the low level of symmetric and non-specific RNA synthesis catalyzed by the core RNA polymerase devoid of the sigma factor has been analyzed. Shearing of DNA's including T4 DNA markedly increased the template activities with the core enzyme but not with the holoenzyme. This finding suggests that RNA synthesis by the core enzyme increases concomittantly with the production of termini in DNA. Double-stranded circular DNA's such as dv and fd-RFI were found to be inactive as templates for the core enzyme, but were made active by introduction of single-strand nicks with deoxyribonuclease. In contrast, single-stranded circular DNA (X 174) served as a good template for RNA synthesis by the core RNA polymerase. These findings suggest that the sigma factor may activate double-stranded DNA at the promotor sites by creating proper initiation points for RNA synthesis. Partial separation of duplex DNA into single-stranded forms at the promotor sites could be one of the processes in the reaction catalyzed by the holoenzyme containing the sigma factor.     

Endonuclease-mediated long PCR and its application to restriction mapping

The polymerase chain reaction (PCR) is the most widely used technique for the study of DNA. Applications for PCR have been extended significantly by the development of "long" PCR, a technique that makes it possible to amplify DNA fragments up to 40 kb in length. This article describes two novel applications of the long PCR technique, one which simplifies restriction mapping and another which enhances amplification specificity and yield. The same primers used to perform the long PCR amplification can be used as probes to perform restriction mapping of the DNA fragment amplified. Restriction digestion performed prior to long PCR amplification can be used to selectively suppress the amplification of members of families of closely related DNA sequences, thereby making it possible to selectively amplify one of a group of highly homologous sequences. These two complimentary techniques, both involving use of the long PCR paired with restriction digestion, have potential application in any laboratory in which PCR is performed.     

An efficient strategy for broad-range detection of low abundance bacteria without DNA decontamination of PCR reagents

Background

Bacterial DNA contamination in PCR reagents has been a long standing problem that hampers the adoption of broad-range PCR in clinical and applied microbiology, particularly in detection of low abundance bacteria. Although several DNA decontamination protocols have been reported, they all suffer from compromised PCR efficiency or detection limits. To date, no satisfactory solution has been found.

Methodology/Principal Findings

We herein describe a method that solves this long standing problem by employing a broad-range primer extension-PCR (PE-PCR) strategy that obviates the need for DNA decontamination. In this method, we first devise a fusion probe having a 3′-end complementary to the template bacterial sequence and a 5′-end non-bacterial tag sequence. We then hybridize the probes to template DNA, carry out primer extension and remove the excess probes using an optimized enzyme mix of Klenow DNA polymerase and exonuclease I. This strategy allows the templates to be distinguished from the PCR reagent contaminants and selectively amplified by PCR. To prove the concept, we spiked the PCR reagents with Staphylococcus aureus genomic DNA and applied PE-PCR to amplify template bacterial DNA. The spiking DNA neither interfered with template DNA amplification nor caused false positive of the reaction. Broad-range PE-PCR amplification of the 16S rRNA gene was also validated and minute quantities of template DNA (10–100 fg) were detectable without false positives. When adapting to real-time and high-resolution melting (HRM) analytical platforms, the unique melting profiles for the PE-PCR product can be used as the molecular fingerprints to further identify individual bacterial species.

Conclusions/Significance

Broad-range PE-PCR is simple, efficient, and completely obviates the need to decontaminate PCR reagents. When coupling with real-time and HRM analyses, it offers a new avenue for bacterial species identification with a limited source of bacterial DNA, making it suitable for use in clinical and applied microbiology laboratories.     

Cross-species amplification of microsatellite primers in passerine birds

Developing species specific microsatellite primers can be avoidedby using existing markers which amplify across species. However,for passerines, such cross-species markers are mostly lackingand few guidelines exist for selecting them from the wide rangeof existing markers. Here cross-species amplification tests of 40microsatellite primers in 13 passerine species show an increasein probability of amplification and polymorphism with decreasingphylogenetic distance. Primers which successfully amplified inmany species had a higher chance to be polymorphic. However,since the amplification success, across a broad range of species,of particular primersets remains difficult to predict it iscrucial to identify such markers empirically. Here we describesuch widely applicable bird (passerines) microsatellite markers.     

RNA: a method to specifically inhibit PCR amplification of known members of a multigene family by degenerate primers

The polymerase chain reaction (PCR) is a versatile method to amplify specific DNA with oligonucleotide primers. By designing degenerate PCR primers based on amino acid sequences that are highly conserved among all known gene family members, new members of a multigene family can be identified. The inherent weakness of this approach is that the degenerate primers will amplify previously identified, in addition to new, family members. To specifically address this problem, we synthesized a specific RNA for each known family member so that it hybridized to one strand of the template, adjacent to the 3′-end of the primer, allowing the degenerate primer to bind yet preventing extension by DNA polymerase. To test our strategy, we used known members of the soluble, nitric oxide-sensitive guanylyl cyclase family as our templates and degenerate primers that discriminate this family from other guanylyl cyclases. We demonstrate that amplification of known members of this family is effectively and specifically inhibited by the corresponding RNAs, alone or in combination. This robust method can be adapted to any application where multiple PCR products are amplified, as long as the sequence of the desired and the undesired PCR product(s) is sufficiently distinct between the primers.     

In situ localized amplification and contact replication of many individual DNA molecules

We describe a method to clone and amplify DNA by performing the polymerase chain reaction (PCR) in a thin polyacrylamide film poured on a glass microscope slide. The polyacrylamide matrix retards the diffusion of the linear DNA molecules so that the amplification products remain localized near their respective templates. At the end of the reaction, a number of PCR colonies, or 'polonies', have formed, each one grown from a single template molecule. As many as 5 million clones can be amplified in parallel on a single slide. If an Acrydite modification is included at the 5' end of one of the primers, the amplified DNA will be covalently attached to the polyacrylamide matrix, allowing further enzymatic manipulations to be performed on all clones simultaneously. We describe techniques to make replicas of these polony slides, and high throughput sequencing protocols for this technology. Other applications are also discussed.     

Sensitive isothermal detection of nucleic-acid sequence by primer generation–rolling circle amplification

A simple isothermal nucleic-acid amplification reaction, primer generation–rolling circle amplification (PG–RCA), was developed to detect specific nucleic-acid sequences of sample DNA. This amplification method is achievable at a constant temperature (e.g. 60°C) simply by mixing circular single-stranded DNA probe, DNA polymerase and nicking enzyme. Unlike conventional nucleic-acid amplification reactions such as polymerase chain reaction (PCR), this reaction does not require exogenous primers, which often cause primer dimerization or non-specific amplification. Instead, ‘primers’ are generated and accumulated during the reaction. The circular probe carries only two sequences: (i) a hybridization sequence to the sample DNA and (ii) a recognition sequence of the nicking enzyme. In PG–RCA, the circular probe first hybridizes with the sample DNA, and then a cascade reaction of linear rolling circle amplification and nicking reactions takes place. In contrast with conventional linear rolling circle amplification, the signal amplification is in an exponential mode since many copies of ‘primers’ are successively produced by multiple nicking reactions. Under the optimized condition, we obtained a remarkable sensitivity of 84.5 ymol (50.7 molecules) of synthetic sample DNA and 0.163 pg (~60 molecules) of genomic DNA from Listeria monocytogenes, indicating strong applicability of PG–RCA to various molecular diagnostic assays.