Comparative specificities of two evolutionarily divergent hydrolases involved in microbial degradation of polychlorinated biphenyls

2-Hydroxy-6-oxo-6-phenylhexa-2,4-dienoate (HOPDA) hydrolase (BphD) is a key determinant in the aerobic transformation of polychlorinated biphenyls (PCBs) by Burkholderia sp. strain LB400 (S. Y. K. Seah, G. Labbé, S. Nerdinger, M. Johnson, V. Snieckus, and L. D. Eltis, J. Biol. Chem. 275:15701-15708, 2000). To determine whether this is also true in divergent biphenyl degraders, the homologous hydrolase of Rhodococcus globerulus P6, BphD(P6), was hyperexpressed, purified to apparent homogeneity, and studied by steady-state kinetics. BphD(P6) hydrolyzed HOPDA with a k(cat)/K(m) of 1.62 (+/- 0.03) x 10(7) M(-1) s(-1) (100 mM phosphate [pH 7.5], 25 degrees C), which is within 70% of that of BphD(LB400). BphD(P6) was also similar to BphD(LB400) in that it catalyzed the hydrolysis of HOPDAs bearing chloro substituents on the phenyl moiety at least 25 times more specifically than those bearing chloro substituents on the dienoate moiety. However, the rhodococcal enzyme was significantly more specific for 9-Cl and 10-Cl HOPDAs, catalyzing the hydrolysis of 9-Cl, 10-Cl, and 9,10-diCl HOPDAs two- to threefold respectively, more specifically than HOPDA. Moreover, 4-Cl HOPDA competitively inhibited BphD(P6) more effectively than 3-Cl HOPDA, which is the inverse of what was observed in BphD(LB400). These results demonstrate that BphD is a key determinant in the aerobic transformation of PCBs by divergent biphenyl degraders, but that there exists significant diversity in the specificity of these biphenyl hydrolases.     

Tuning the substrate selectivity of meta-cleavage product hydrolase by domain swapping

meta-Cleavage product (MCP) hydrolases can catalyze relatively low reactive carbon–carbon bond hydrolysis of products, which are derived from the meta-cleavage of catechols. The strict substrate selectivity of MCP hydrolases attracts an interest to understand the determinants of substrate specificity. Compared with conventional site-directed mutagenesis, domain swapping is an effective strategy to explore substrate specificity due to the large-scale reorganization of three-dimensional structure. In the present study, the hybrid MCP hydrolases BphD_LidA and MfphA_LidD were constructed by exchanging the lid domain of two parental enzymes MfphA and BphD. The residues Gly130/Ala196 (MfphA) and Gly136/Ala211 (BphD) were selected as crossover points according to structural disruption score analysis and molecular dynamics simulations. It was shown that the hybrid enzymes exhibited similar substrate selectivity with the parent enzyme providing the lid domain. Docking studies suggested that the lid domain may play a key role in determining substrate specificity by reshaping the active pocket and modulating the orientation of the substrate.     

Characterization of a C-C bond hydrolase from Sphingomonas wittichii RW1 with novel specificities towards polychlorinated biphenyl metabolites

Sphingomonas wittichii RW1 degrades chlorinated dibenzofurans and dibenzo-p-dioxins via meta cleavage. We used inverse PCR to amplify dxnB2, a gene encoding one of three meta-cleavage product (MCP) hydrolases identified in the organism that are homologues of BphD involved in biphenyl catabolism. Purified DxnB2 catalyzed the hydrolysis of 8-OH 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate (HOPDA) approximately six times faster than for HOPDA at saturating substrate concentrations. Moreover, the specificity of DxnB2 for HOPDA (k(cat)/K(m) = 1.2 x 10(7) M(-1) s(-1)) was about half that of the BphDs of Burkholderia xenovorans LB400 and Rhodococcus globerulus P6, two potent polychlorinated biphenyl (PCB)-degrading strains. Interestingly, DxnB2 transformed 3-Cl and 4-OH HOPDAs, compounds that inhibit the BphDs and limit PCB degradation. DxnB2 had a higher specificity for 9-Cl HOPDA than for HOPDA but a lower specificity for 8-Cl HOPDA (k(cat)/K(m) = 1.7 x 10(6) M(-1) s(-1)), the chlorinated analog of 8-OH HOPDA produced during dibenzofuran catabolism. Phylogenetic analyses based on structure-guided sequence alignment revealed that DxnB2 belongs to a previously unrecognized class of MCP hydrolases, evolutionarily divergent from the BphDs although the physiological substrates of both enzyme types are HOPDAs. However, both classes of enzymes have mainly small hydrophobic residues lining the subsite that binds the C-6 phenyl of HOPDA, in contrast to the bulky hydrophobic residues (Phe106, Phe135, Trp150, and Phe197) found in the class II enzymes that prefer substrates possessing a C-6 alkyl. Thr196 and/or Asn203 appears to be an important determinant of specificity for DxnB2, potentially forming hydrogen bonds with the 8-OH substituent. This study demonstrates that the substrate specificities of evolutionarily divergent hydrolases may be useful for degrading mixtures of pollutants, such as PCBs.     

The catalytic serine of meta-cleavage product hydrolases is activated differently for C-O bond cleavage than for C-C bond cleavage

meta-Cleavage product (MCP) hydrolases catalyze C-C bond fission in the aerobic catabolism of aromatic compounds by bacteria. These enzymes utilize a Ser-His-Asp triad to catalyze hydrolysis via an acyl-enzyme intermediate. BphD, which catalyzes the hydrolysis of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) in biphenyl degradation, catalyzed the hydrolysis of an ester analogue, p-nitrophenyl benzoate (pNPB), with a k(cat) value (6.3 ± 0.5 s(-1)) similar to that of HOPDA (6.5 ± 0.5 s(-1)). Consistent with the breakdown of a shared intermediate, product analyses revealed that BphD catalyzed the methanolysis of both HOPDA and pNPB, partitioning the products to benzoic acid and methyl benzoate in similar ratios. Turnover of HOPDA was accelerated up to 4-fold in the presence of short, primary alcohols (methanol > ethanol > n-propanol), suggesting that deacylation is rate-limiting during catalysis. In the steady-state hydrolysis of HOPDA, k(cat)/K(m) values were independent of methanol concentration, while both k(cat) and K(m) values increased with methanol concentration. This result was consistent with a simple model of nucleophilic catalysis. Although the enzyme could not be saturated with pNPB at methanol concentrations of >250 mM, k(obs) values from the steady-state turnover of pNPB at low methanol concentrations were also consistent with a nucleophilic mechanism of catalysis. Finally, transient-state kinetic analysis of pNPB hydrolysis by BphD variants established that substitution of the catalytic His reduced the rate of acylation by more than 3 orders of magnitude. This suggests that for pNPB hydrolysis, the serine nucleophile is activated by the His-Asp dyad. In contrast, rapid acylation of the H265Q variant during C-C bond cleavage suggests that the serinate forms via a substrate-assisted mechanism. Overall, the data indicate that ester hydrolysis proceeds via the same acyl-enzyme intermediate as that of the physiological substrate but that the serine nucleophile is activated via a different mechanism.     

Characterization of a Carbon-Carbon Hydrolase from Mycobacterium tuberculosis Involved in Cholesterol Metabolism

In the recently identified cholesterol catabolic pathway of Mycobacterium tuberculosis, 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate hydrolase (HsaD) is proposed to catalyze the hydrolysis of a carbon-carbon bond in 4,5–9,10-diseco-3-hydroxy-5,9,17-tri-oxoandrosta-1(10),2-diene-4-oic acid (DSHA), the cholesterol meta-cleavage product (MCP) and has been implicated in the intracellular survival of the pathogen. Herein, purified HsaD demonstrated 4–33 times higher specificity for DSHA (k_cat/K_m = 3.3 ± 0.3 × 10⁴ m⁻¹ s⁻¹) than for the biphenyl MCP 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) and the synthetic analogue 8-(2-chlorophenyl)-2-hydroxy-5-methyl-6-oxoocta-2,4-dienoic acid (HOPODA), respectively. The S114A variant of HsaD, in which the active site serine was substituted with alanine, was catalytically impaired and bound DSHA with a K_d of 51 ± 2 μm. The S114A·DSHA species absorbed maximally at 456 nm, 60 nm red-shifted versus the DSHA enolate. Crystal structures of the variant in complex with HOPDA, HOPODA, or DSHA to 1.8–1.9 Åindicate that this shift is due to the enzyme-induced strain of the enolate. These data indicate that the catalytic serine catalyzes tautomerization. A second role for this residue is suggested by a solvent molecule whose position in all structures is consistent with its activation by the serine for the nucleophilic attack of the substrate. Finally, the α-helical lid covering the active site displayed a ligand-dependent conformational change involving differences in side chain carbon positions of up to 6.7 Å, supporting a two-conformation enzymatic mechanism. Overall, these results provide novel insights into the determinants of specificity in a mycobacterial cholesterol-degrading enzyme as well as into the mechanism of MCP hydrolases.     

Identification of a serine hydrolase as a key determinant in the microbial degradation of polychlorinated biphenyls

The ability of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate (HOPDA) hydrolase (BphD) of Burkholderia cepacia LB400 to hydrolyze polychlorinated biphenyl (PCB) metabolites was assessed by determining its specificity for monochlorinated HOPDAs. The relative specificities of BphD for HOPDAs bearing chlorine substituents on the phenyl moiety were 0.28, 0.38, and 1.1 for 8-Cl, 9-Cl, and 10-Cl HOPDA, respectively, versus HOPDA (100 mm phosphate, pH 7.5, 25 degrees C). In contrast, HOPDAs bearing chlorine substituents on the dienoate moiety were poor substrates for BphD, which hydrolyzed 3-Cl, 4-Cl, and 5-Cl HOPDA at relative maximal rates of 2.1 x 10(-3), 1.4 x 10(-4), and 0.36, respectively, versus HOPDA. The enzymatic transformation of 3-, 5-, 8-, 9-, and 10-Cl HOPDAs yielded stoichiometric quantities of the corresponding benzoate, indicating that BphD catalyzes the hydrolysis of these HOPDAs in the same manner as unchlorinated HOPDA. HOPDAs also underwent a nonenzymatic transformation to products that included acetophenone. In the case of 4-Cl HOPDA, this transformation proceeded via the formation of 4-OH HOPDA (t(12) = 2.8 h; 100 mm phosphate, pH 7.5, 25 degrees C). 3-Cl HOPDA (t(12) = 504 h) was almost 3 times more stable than 4-OH HOPDA. Finally, 3-Cl, 4-Cl and 4-OH HOPDAs competitively inhibited the BphD-catalyzed hydrolysis of HOPDA (K(ic) values of 0.57 +/- 0. 04, 3.6 +/- 0.2, and 0.95 +/- 0.04 microm, respectively). These results explain the accumulation of HOPDAs and chloroacetophenones in the microbial degradation of certain PCB congeners. More significantly, they indicate that in the degradation of PCB mixtures, BphD would be inhibited, thereby slowing the mineralization of all congeners. BphD is thus a key determinant in the aerobic microbial degradation of PCBs.     

色氨酸残基在碳-碳水解酶催化中的关键作用

碳-碳水解酶（C-C水解酶）作为α/β水解酶超家族中的一员,负责催化环裂产物C-C键的断裂,该反应是细菌降解芳香族化合物途径中的关键步骤. 为了解水解酶的催化特性,本文对该酶部分氨基酸进行了定点突变,并对突变体的动力学参数,化学修饰剂对突变体活性的影响以及突变体的二级结构进行了测定.各突变体的动力学参数特征为：突变体S110A,H265A和D237A的催化效率为野生型的1/104~1/103;突变体W85A和W219A催化效率分别为野生型的5/18和1/3,而同为色氨酸的突变体,W266A的催化效率只有野生型的1/104. 化学修饰剂对突变体S110A,H265A,D237A和W266A的酶活性几乎没有影响;而对突变体W85A和W219A却有较大的影响,修饰后,其相对活性仅为对照的10%~30%. 突变体的圆二色谱（CD谱）分析表明,与野生型相比,突变体的二级结构没有发生改变. 证明了Ser110,Asp237,His265是2-羟基-6-氧-6-苯基己-2,4-二烯酸水解酶（HOPDA hydrolase, HOPDA水解酶）催化反应所必需的氨基酸,并提出了Trp266在催化反应中也同样起到了非常关键的作用.     

The molecular basis for inhibition of BphD, a C-C bond hydrolase involved in polychlorinated biphenyls degradation: large 3-substituents prevent tautomerization

The microbial degradation of polychlorinated biphenyls (PCBs) by the biphenyl catabolic (Bph) pathway is limited in part by the pathway's fourth enzyme, BphD. BphD catalyzes an unusual carbon-carbon bond hydrolysis of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA), in which the substrate is subject to histidine-mediated enol-keto tautomerization prior to hydrolysis. Chlorinated HOPDAs such as 3-Cl HOPDA inhibit BphD. Here we report that BphD preferentially hydrolyzed a series of 3-substituted HOPDAs in the order H>F>Cl>Me, suggesting that catalysis is affected by steric, not electronic, determinants. Transient state kinetic studies performed using wild-type BphD and the hydrolysis-defective S112A variant indicated that large 3-substituents inhibited His-265-catalyzed tautomerization by 5 orders of magnitude. Structural analyses of S112A.3-Cl HOPDA and S112A.3,10-diF HOPDA complexes revealed a non-productive binding mode in which the plane defined by the carbon atoms of the dienoate moiety of HOPDA is nearly orthogonal to that of the proposed keto tautomer observed in the S112A.HOPDA complex. Moreover, in the 3-Cl HOPDA complex, the 2-hydroxo group is moved by 3.6 A from its position near the catalytic His-265 to hydrogen bond with Arg-190 and access of His-265 is blocked by the 3-Cl substituent. Nonproductive binding may be stabilized by interactions involving the 3-substituent with non-polar side chains. Solvent molecules have poor access to C6 in the S112A.3-Cl HOPDA structure, more consistent with hydrolysis occurring via an acyl-enzyme than a gem-diol intermediate. These results provide insight into engineering BphD for PCB degradation.     

Kinetic and structural insight into the mechanism of BphD, a C-C bond hydrolase from the biphenyl degradation pathway

Kinetic and structural analyses of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) hydrolase from Burkholderia xenovorans LB400 (BphD(LB400)) provide insight into the catalytic mechanism of this unusual serine hydrolase. Single turnover stopped-flow analysis at 25 degrees C showed that the enzyme rapidly (1/tau(1) approximately 500 s(-1)) transforms HOPDA (lambda(max) = 434 nm) into a species with electronic absorption maxima at 473 and 492 nm. The absorbance of this enzyme-bound species (E:S) decayed in a biphasic manner (1/tau(2) = 54 s(-1), 1/tau(3) = 6 s(-1) approximately k(cat)) with simultaneous biphasic appearance (48 and 8 s(-1)) of an absorbance band at 270 nm characteristic of one of the products, 2-hydroxypenta-2,4-dienoic acid (HPD). Increasing solution viscosity with glycerol slowed 1/tau(1) and 1/tau(2) but affected neither 1/tau(3) nor k(cat), suggesting that 1/tau(2) may reflect diffusive HPD dissociation, and 1/tau(3) represents an intramolecular event. Product inhibition studies suggested that the other product, benzoate, is released after HPD. Contrary to studies in a related hydrolase, we found no evidence that ketonized HOPDA is partially released prior to hydrolysis, and, therefore, postulate that the biphasic kinetics reflect one of two mechanisms, pending assignment of E:S (lambda(max) = 492 nm). The crystal structures of the wild type, the S112C variant, and S112C incubated with HOPDA were each determined to 1.6 A resolution. The latter reveals interactions between conserved active site residues and the dienoate moiety of the substrate. Most notably, the catalytic residue His265 is hydrogen-bonded to the 2-hydroxy/oxo substituent of HOPDA, consistent with a role in catalyzing ketonization. The data are more consistent with an acyl-enzyme mechanism than with the formation of a gem-diol intermediate.     

A novel dienelactone hydrolase from the thermoacidophilic archaeon Sulfolobus solfataricus P1: Purification,characterization, and expression

Background

Dienelactone hydrolases catalyze the hydrolysis of dienelactone to maleylacetate, which play a key role for the microbial degradation of chloroaromatics via chlorocatechols. Here, a thermostable dienelactone hydrolase from thermoacidophilic archaeon Sulfolobus solfataricus P1 was the first purified and characterized and then expressed in Escherichia coli.

Methods

The enzyme was purified by using several column chromatographys and characterized by determining the enzyme activity using p-nitrophenyl caprylate and dienelactones. In addition, the amino acids related to the catalytic mechanism were examined by site-directed mutagenesis using the identified gene.

Results

The enzyme, approximately 29 kDa monomeric, showed the maximal activity at 74 °C and pH 5.0, respectively. The enzyme displayed remarkable thermostability: it retained approximately 50% of its activity after 50 h of incubation at 90 °C, and showed high stability against denaturing agents, including various detergents, urea, and organic solvents. The enzyme displayed substrate specificities toward trans-dienelactone, not cis-isomer, and also carboxylesterase activity toward p-nitrophenyl esters ranging from butyrate (C₄) to laurate (C₁₂). The k_cat/K_m ratios for trans-dienelactone and p-nitrophenyl caprylate (C₈), the best substrate, were 92.5 and 54.7 s⁻¹ μM⁻¹, respectively.

Conclusions

The enzyme is a typical dienelactone hydrolase belonging to α/β hydrolase family and containing a catalytic triad composed of Cys151, Asp198, and His229 in the active site.

General significance

The enzyme is the first characterized archaeal dienelactone hydrolase.     

Improving the thermostability of methyl parathion hydrolase from Ochrobactrum sp. M231 using a computationally aided method

Good protein thermostability is very important for the protein application. In this report, we propose a strategy which contained a prediction method to select residues related to protein thermal stability, but not related to protein function, and an experiment method to screen the mutants with enhanced thermostability. The prediction strategy was based on the calculated site evolutionary entropy and unfolding free energy difference between the mutant and wild-type (WT) methyl parathion hydrolase enzyme from Ochrobactrum sp. M231 [Ochr-methyl parathion hydrolase (MPH)]. As a result, seven amino acid sites within Ochr-MPH were selected and used to construct seven saturation mutagenesis libraries. The results of screening these libraries indicated that six sites could result in mutated enzymes exhibiting better thermal stability than the WT enzyme. A stepwise evolutionary approach was designed to combine these selected mutants and a mutant with four point mutations (S274Q/T183E/K197L/S192M) was selected. The T _m and T ₅₀ of the mutant enzyme were 11.7 and 10.2 °C higher, respectively, than that of the WT enzyme. The success of this design methodology for Ochr-MPH suggests that it was an efficient strategy for enhancing protein thermostability and suitable for protein engineering.     

Characterization of modular bifunctional processive endoglucanase Cel5 from Hahella chejuensis KCTC 2396

Cel5 from marine Hahella chejuensis is composed of glycoside hydrolase family-5 (GH5) catalytic domain (CD) and two carbohydrate binding modules (CBM6-2). The enzyme was expressed in Escherichia coli and purified to homogeneity. The optimum endoglucanase and xylanase activities of recombinant Cel5 were observed at 65 °C, pH 6.5 and 55 °C, pH 5.5, respectively. It exhibited K _m of 1.8 and 7.1 mg/ml for carboxymethyl cellulose and birchwood xylan, respectively. The addition of Ca²⁺ greatly improved thermostability and endoglucanase activity of Cel5. The Cel5 retained 90 % of its endoglucanase activity after 24 h incubation in presence of 5 M concentration of NaCl. Recombinant Cel5 showed production of cellobiose after hydrolysis of cellulosic substrates (soluble/insoluble) and methylglucuronic acid substituted xylooligosaccharides after hydrolysis of glucuronoxylans by endo-wise cleavage. These results indicated that Cel5 as bifunctional enzyme having both processive endoglucanase and xylanase activities. The multidomain structure of Cel5 is clearly distinguished from the GH5 bifunctional glycoside hydrolases characterized to date, which are single domain enzymes. Sequence analysis and homology modeling suggested presence of two conserved binding sites with different substrate specificities in CBM6-2 and a single catalytic site in CD. Residues Glu132 and Glu219 were identified as key catalytic amino acids by sequence alignment and further verified by using site directed mutagenesis. CBM6-2 plays vital role in catalytic activity and thermostability of Cel5. The bifunctional activities and multiple substrate specificities of Cel5 can be utilized for efficient hydrolysis of cellulose and hemicellulose into soluble sugars.     

Protein engineering of Bacillus acidopullulyticus pullulanase for enhanced thermostability using in silico data driven rational design methods

Thermostability has been considered as a requirement in the starch processing industry to maintain high catalytic activity of pullulanase under high temperatures. Four data driven rational design methods (B-FITTER, proline theory, PoPMuSiC-2.1, and sequence consensus approach) were adopted to identify the key residue potential links with thermostability, and 39 residues of Bacillus acidopullulyticus pullulanase were chosen as mutagenesis targets. Single mutagenesis followed by combined mutagenesis resulted in the best mutant E518I-S662R-Q706P, which exhibited an 11-fold half-life improvement at 60 °C and a 9.5 °C increase in T_m. The optimum temperature of the mutant increased from 60 to 65 °C. Fluorescence spectroscopy results demonstrated that the tertiary structure of the mutant enzyme was more compact than that of the wild-type (WT) enzyme. Structural change analysis revealed that the increase in thermostability was most probably caused by a combination of lower stability free-energy and higher hydrophobicity of E518I, more hydrogen bonds of S662R, and higher rigidity of Q706P compared with the WT. The findings demonstrated the effectiveness of combined data-driven rational design approaches in engineering an industrial enzyme to improve thermostability.     

Crystal Structure of α-1,4-Glucan Lyase,a Unique Glycoside Hydrolase Family Member with a Novel Catalytic Mechanism

α-1,4-Glucan lyase (EC 4.2.2.13) from the red seaweed Gracilariopsis lemaneiformis cleaves α-1,4-glucosidic linkages in glycogen, starch, and malto-oligosaccharides, yielding the keto-monosaccharide 1,5-anhydro-d-fructose. The enzyme belongs to glycoside hydrolase family 31 (GH31) but degrades starch via an elimination reaction instead of hydrolysis. The crystal structure shows that the enzyme, like GH31 hydrolases, contains a (β/α)₈-barrel catalytic domain with B and B′ subdomains, an N-terminal domain N, and the C-terminal domains C and D. The N-terminal domain N of the lyase was found to bind a trisaccharide. Complexes of the enzyme with acarbose and 1-dexoynojirimycin and two different covalent glycosyl-enzyme intermediates obtained with fluorinated sugar analogues show that, like GH31 hydrolases, the aspartic acid residues Asp⁵⁵³ and Asp⁶⁶⁵ are the catalytic nucleophile and acid, respectively. However, as a unique feature, the catalytic nucleophile is in a position to act also as a base that abstracts a proton from the C2 carbon atom of the covalently bound subsite −1 glucosyl residue, thus explaining the unique lyase activity of the enzyme. One Glu to Val mutation in the active site of the homologous α-glucosidase from Sulfolobus solfataricus resulted in a shift from hydrolytic to lyase activity, demonstrating that a subtle amino acid difference can promote lyase activity in a GH31 hydrolase.     

Kinetic characterization of the Escherichia coli oligopeptidase A (OpdA) and the role of the Tyr residue

Oligopeptidase A (OpdA) belongs to the M3A subfamily of bacterial peptidases with catalytic and structural properties similar to mammalian thimet-oligopeptidase (TOP) and neurolysin (NEL). The three enzymes have four conserved Tyr residues on a flexible loop in close proximity to the catalytic site. In OpdA, the flexible loop is formed by residues 600-614 (⁶⁰⁰SHIFAGGYAAGYYSY⁶¹⁴). Modeling studies indicated that in OpdA the Tyr⁶⁰⁷ residue might be involved in the recognition of the substrate with a key role in catalysis. Two mutants were constructed replacing Tyr⁶⁰⁷ by Phe (Y607F) or Ala (Y607A) and the influence of the site-directed mutagenesis in the catalytic process was examined. The hydrolysis of Abz-GXSPFRQ-EDDnp derivatives (Abz = ortho-aminobenzoic acid; EDDnp N-[2,4-dinitrophenyl]-ethylenediamine; X = different amino acids) was studied to compare the activities of wild-type OpdA (OpdA WT) and those of Y607F and Y607A mutants The results indicated that OpdA WT cleaved all the peptides only on the X-S bond whereas the Y607F and Y607A mutants were able to hydrolyze both the X-S and the P-F bonds. The kinetic parameters showed the importance of Tyr⁶⁰⁷ in OpdA catalytic activity as its substitution promoted a decrease in the k_cat/K_m value of about 100-fold with Y607F mutant and 1000-fold with Y607A. Both mutations, however, did not affect protein folding as indicated by CD and intrinsic fluorescence analysis. Our results indicate that the OpdA Tyr⁶⁰⁷ residue plays an important role in the enzyme-substrate interaction and in the hydrolytic activity.     

Biochemical and structural characterization of a novel cold-active esterase-like protein from the psychrophilic yeast Glaciozyma antarctica

Dienelactone hydrolase, an α/β hydrolase enzyme, catalyzes the hydrolysis of dienelactone to maleylacetate, an intermediate for the Krebs cycle. Genome sequencing of the psychrophilic yeast, Glaciozyma antarctica predicted a putative open reading frame (ORF) for dienelactone hydrolase (GaDlh) with 52% sequence similarity to that from Coniophora puteana. Phylogenetic tree analysis showed that GaDlh is closely related to other reported dienelactone hydrolases, and distantly related to other α/β hydrolases. Structural prediction using MODELLER 9.14 showed that GaDlh has the same α/β hydrolase fold as other dienelactone hydrolases and esterase/lipase enzymes, with a catalytic triad consisting of Cys–His–Asp and a G–x–C–x–G–G motif. Based on the predicted structure, GaDlh exhibits several characteristics of cold-adapted proteins such as glycine clustering in the binding pocket, reduced protein core hydrophobicity, and the absence of proline residues in loops. The putative ORF was amplified, cloned, and overexpressed in an Escherichia coli expression system. The recombinant protein was overexpressed as soluble proteins and was purified via Ni–NTA affinity chromatography. Biochemical characterization of GaDlh revealed that it has an optimal temperature at 10 °C and that it retained almost 90% of its residual activity when incubated for 90 min at 10 °C. The optimal pH was at pH 8.0 and it was stable between pH 5–9 when incubated for 60 min (more than 50% residual activity). Its K_m value was 256 μM and its catalytic efficiency was 81.7 s⁻¹. To our knowledge, this is the first report describing a novel cold-active dienelactone hydrolase-like protein.

     

The tautomeric half-reaction of BphD, a C-C bond hydrolase. Kinetic and structural evidence supporting a key role for histidine 265 of the catalytic triad

BphD of Burkholderia xenovorans LB400 catalyzes an unusual C-C bond hydrolysis of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) to afford benzoic acid and 2-hydroxy-2,4-pentadienoic acid (HPD). An enol-keto tautomerization has been proposed to precede hydrolysis via a gem-diol intermediate. The role of the canonical catalytic triad (Ser-112, His-265, Asp-237) in mediating these two half-reactions remains unclear. We previously reported that the BphD-catalyzed hydrolysis of HOPDA (lambda(max) is 434 nm for the free enolate) proceeds via an unidentified intermediate with a red-shifted absorption spectrum (lambda(max) is 492 nm) (Horsman, G. P., Ke, J., Dai, S., Seah, S. Y. K., Bolin, J. T., and Eltis, L. D. (2006) Biochemistry 45, 11071-11086). Here we demonstrate that the S112A variant generates and traps a similar intermediate (lambda(max) is 506 nm) with a similar rate, 1/tau approximately 500 s(-1). The crystal structure of the S112A:HOPDA complex at 1.8-A resolution identified this intermediate as the keto tautomer, (E)-2,6-dioxo-6-phenyl-hex-3-enoate. This keto tautomer did not accumulate in either the H265A or the S112A/H265A double variants, indicating that His-265 catalyzes tautomerization. Consistent with this role, the wild type and S112A enzymes catalyzed tautomerization of the product HPD, whereas H265A variants did not. This study thus identifies a keto intermediate, and demonstrates that the catalytic triad histidine catalyzes the tautomerization half-reaction, expanding the role of this residue from its purely hydrolytic function in other serine hydrolases. Finally, the S112A:HOPDA crystal structure is more consistent with hydrolysis occurring via an acyl-enzyme intermediate than a gem-diol intermediate as solvent molecules have poor access to C6, and the closest ordered water is 7 A away.     

Patient mutations in human ATP:cob(I)alamin adenosyltransferase differentially affect its catalytic versus chaperone functions

Human ATP:cob(I)alamin adenosyltransferase (ATR) is a mitochondrial enzyme that catalyzes an adenosyl transfer to cob(I)alamin, synthesizing 5′-deoxyadenosylcobalamin (AdoCbl) or coenzyme B₁₂. ATR is also a chaperone that escorts AdoCbl, transferring it to methylmalonyl-CoA mutase, which is important in propionate metabolism. Mutations in ATR lead to methylmalonic aciduria type B, an inborn error of B₁₂ metabolism. Our previous studies have furnished insights into how ATR protein dynamics influence redox-linked cobalt coordination chemistry, controlling its catalytic versus chaperone functions. In this study, we have characterized three patient mutations at two conserved active site residues in human ATR, R190C/H, and E193K and obtained crystal structures of R190C and E193K variants, which display only subtle structural changes. All three mutations were found to weaken affinities for the cob(II)alamin substrate and the AdoCbl product and increase K_M(ATP). ³¹P NMR studies show that binding of the triphosphate product, formed during the adenosylation reaction, is also weakened. However, although the k_cat of this reaction is significantly diminished for the R190C/H mutants, it is comparable with the WT enzyme for the E193K variant, revealing the catalytic importance of Arg-190. Furthermore, although the E193K mutation selectively impairs the chaperone function by promoting product release into solution, its catalytic function might be unaffected at physiological ATP concentrations. In contrast, the R190C/H mutations affect both the catalytic and chaperoning activities of ATR. Because the E193K mutation spares the catalytic activity of ATR, our data suggest that the patients carrying this mutation are more likely to be responsive to cobalamin therapy.     

Single Arginine Mutation in Two Yeast Isocitrate Dehydrogenases: Biochemical Characterization and Functional Implication

Isocitrate dehydrogenase (IDH), a housekeeping gene, has drawn the attention of cancer experts. Mutation of the catalytic Arg132 residue of human IDH1 (HcIDH) eliminates the enzyme''s wild-type isocitrate oxidation activity, but confer the mutant an ability of reducing α-ketoglutarate (α-KG) to 2-hydroxyglutarate (2-HG). To examine whether an analogous mutation in IDHs of other eukaryotes could cause similar effects, two yeast mitochondrial IDHs, Saccharomyces cerevisiae NADP⁺-IDH1 (ScIDH1) and Yarrowia lipolytica NADP⁺-IDH (YlIDH), were studied. The analogous Arg residues (Arg148 of ScIDH1 and Arg141 of YlIDH) were mutated to His. The K _m values of ScIDH1 R148H and YlIDH R141H for isocitrate were determined to be 2.4-fold and 2.2-fold higher, respectively, than those of the corresponding wild-type enzymes. The catalytic efficiencies (k _cat/K _m) of ScIDH1 R148H and YlIDH R141H for isocitrate oxidation were drastically reduced by 227-fold and 460-fold, respectively, of those of the wild-type enzymes. As expected, both ScIDH1 R148H and YlIDH R141H acquired the neomorphic activity of catalyzing α-KG to 2-HG, and the generation of 2-HG was confirmed using gas chromatography/time of flight-mass spectrometry (GC/TOF-MS). Kinetic analysis showed that ScIDH1 R148H and YlIDH R141H displayed 5.2-fold and 3.3-fold higher affinities, respectively, for α-KG than the HcIDH R132H mutant. The catalytic efficiencies of ScIDH1 R148H and YlIDH R141H for α-KG were 5.5-fold and 4.5-fold, respectively, of that of the HcIDH R132H mutant. Since the HcIDH Arg132 mutation is associated with the tumorigenesis, this study provides fundamental information for further research on the physiological role of this IDH mutation in vivo using yeast.     

Characterization and immobilization of a novel SGNH hydrolase (Est24) from Sinorhizobium meliloti

A novel oligomeric SGNH hydrolase (Est24) from Sinorhizobium meliloti was identified, actively expressed in Escherichia coli, characterized, and immobilized for industrial application. Sequence analysis of Est24 revealed a putative catalytic triad (Ser¹³-Asp¹⁶³-His¹⁶⁹), with moderate homology to other SGNH hydrolases. Est24 was more active toward short-chain esters, such as p-nitrophenyl acetate, butyrate, and valerate, while the S13A mutant completely lost its activity. Moreover, the activity of Est24 toward α- and β-naphthyl acetate, and enantioselectivity on (R)- and (S)-methyl-3-hydroxy-2-methylpropionate were tested. Est24 exhibited optimum activity at mesophilic temperature ranges (45–55 °C), and slightly alkaline pH (8.0). Structural and mutagenesis studies revealed critical residues involved in the formation of a catalytic triad and substrate-binding pocket. Cross-linked enzyme aggregates (CLEAs) of Est24 with and without amyloid fibrils were prepared, and amyloid fibril-linked Est24 with amyloid fibrils retained 83 % of its initial activity after 1 h of incubation at 60 °C. The high thermal stability of immobilized Est24 highlights its potential in the pharmaceutical and chemical industries.