Metric and morphological variability in the dentition of Colobine monkeys

A morphological study was performed using 97 Colobus polykomos and 41 Nasalis larvatus. The premolars and molars of these two taxa of leaf-eating monkeys were similar in that they possessed deeply grooved and highly pointed cusps. Of 7 dental traits investigated, 4 were significantly different between the 2 forms. Indeed, with 2 of these, the position of the lingual cusp on PM₄ and the number of cusps on PM³ displayed highly contrasting structures.Metric analysis was conducted using 47 C. polykomos and 37 N. larvatus specimens. Mesiodistal and buccolingual measurements were taken on the upper canine and all postcanine teeth. Sexual dimorphism was detected in most maxillary dental measurements and all mandibular estimates of both species. In all cases, males exceeded females in tooth diameter. Testing between species by sex revealed that C. polykomos was significantly larger in several canine and premolar dimensions while N. larvatus had significantly larger molar dimensions. An additional 73 measurements were selected to represent occluding dental structures and a morphological integration analysis was conducted. Results of this analysis indicated that C. polykomos possessed a C¹-PM₃ complex which was more highly intercorrelated whereas the broad lophed N. larvatus molars constituted a more highly correlated functional unit.It was suggested that the above differences between these two groups of leaf-eating monkeys probably resulted from inbreeding, isolation and drift.     

Tooth size and arcadal length correlates in man

Intra-arcadal mesiodistal and buccolingual tooth size correlations were evaluated in a sample of 125 caucasoids with ideal occlusion. Dental dimensions were corrected for arcade mength (as a measure of jaw size) by a series of regression analyses of each mesiodistal dimension on the sum of the mesiodistal dimensions within each arcade. Regression coefficients of tooth dimension on arcade length were calculated to gain an insight into the dimensional sensitivity of individual teeth to arcade length variation. The data presented here suggest a strong association between arcadal length (jaw size) dependence, and the dimensional stability of individual teeth. When corrected for arcade length, a definite pattern of tooth size correlation emerges: postcanine maxillary and mandibular teeth are negatively correlated to the anterior teeth and are positively correlated to one another. The hypothesis is developed that anterior and postcanine teeth should be viewed as two separate and negatively size-correlated units, beyond the boundaries of the four morphological tooth classes. Recognition of this basic dichotomous size arrangement within each jaw allows for a reassessment of some of the problems associated with hominid dental evolution.     

Dental anomalies and dental variations in the red foxVulpes vulpes in the Czech Republic

Dental abnormalities including polydonty, oligodonty, extra roots, different root morphotype, root fusion, different crown morphotype, crown reduction, partial crown eruption, supernumerary cusp, irregularities in the position of the teeth, and malocclusion were studied in a set of 785 red foxVulpes vulpes (Linnaeus, 1758) skulls (401 males, 273 females, and 111 individuals of unknown sex) from the Czech Republic. Three hundred sixty one cases of deviations from normal were found in 170 specimens (21.7%). Most of the deviations were variants within a genetically determined range. The prevalent dental variants included an extra root of M¹ (5.7% specimens), and different root morphotype of P₁ (1.9% specimens). On the other hand, the real dental anomalies, eg polydonty, occurred seldom within the population. P₁ ¹ and M₃ were missing significantly more frequently among females than among males unlike the other deviations, which were divided equally between the sexes. No differences were found between the left and right side of the jaw. Irregularities in the position of the teeth and oligodonty (excluding P¹ ₁, M₃) appeared significantly more abundantly on mandible, whereas extra roots and polydonty were more common on the maxilla. There was no relationship between the incidence of dental abnormalities and the relative mandible and rostrum length.     

Postcanine tooth size in female primates

The results of many allometric studies of postcanine tooth size in mammals have not corresponded to expectations of tooth size based on energy requirements and dental function. The purpose of this study is to investigate the relationship between postcanine occlusal surface area, body size, and the metabolic demands of pregnancy and lactation in female primates. Tooth and body sizes from 38 primate species were taken from the literature to test two hypotheses: 1) females should have relatively larger teeth than males in order to masticate additional food for the energetic costs of reproduction; 2) taxa with the largest neonatal size (a measure of average metabolic costs of pregnancy and lactation) should have females with a greater degree of relative dental enlargement. The results show that relatively large female teeth are not found consistently in primate species. Females have less occlusal surface area than expected on the basis of the male tooth and body size regression in 21% of the species, and there is no correlation between relative female tooth size and relative newborn size across higher primate taxa. The degree of female dental enlargement is most closely related to degree of sexual dimorphism in body weight. The correlation between degree of body weight dimorphism and relatively larger postcanine teeth in females than in males is 0.87 in the 38 species. Species that are monomorphic in weight tend to be monomorphic in tooth size even though females apparently require more food than males.(ABSTRACT TRUNCATED AT 250 WORDS)     

Static intraspecific allometry of the dentition in Otoletnur crassicaudatus

Adult static intraspecific allometry of tooth size was evaluated in a sample of 66 Otolemur crassicaudatus (34 male, 32 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of canines and postcanine teeth of both arcades and were scaled to four viscerocranial measurements: bimaxillary width; maxillo-alveolar length; mandibular length and bigonial width. Individual tooth crown areas were also scaled to total skull length, body length and body weight. From the log-transformed analyses it is concluded that postcanine tooth size was unrelated to body length or weight, and poorly correlated to skull length or jaw size. Although viscerocranial size appears to be independent of body size, these measures are well correlated to skull length. It is shown that the longer the skull, the shorter and narrower the maxilla, and the longer and broader the mandible. Canines are shown to scale negatively allometric to skull length, hence, large animals will have relatively small canines.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

Static intraspecific allometry of jaws and teeth in Cercopithecus aethiops

Adult static intraspecific allometry of jaw size and tooth area was evaluated in a sample of 100 Cercopithecus aethiops crania (50 male, 50 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of all the teeth in both arcades and were scaled to four viscero-cranial measurements: bimaxillary breadth, maxillo-alveolar length, mandibular length and bigonial width. Allometric coefficients calculated for jaw dimensions alone indicate tighter viscerocranial integration in females than in males. A finding of note was that half of the variation in maxillo-alveolar length may be accounted for by variation in mandibular length: females are isometric, males negatively allometric.
A similar degree of allometric mosaicism was found when maxillary incisor size was scaled to maxillary length and width. In females, the relationship was negatively allometric, whilst incisor size in males was found to be unrelated to either. Negative allometry characterized the relationship of canine base area to jaw length in both sexes, with males additionally being positively allometric to mandibular width.
The scaling of postcanine tooth areas to jaw length was characterized by a dichotomous pattern: males showed significant mandibular integration whilst females showed only significant maxillary integration. Compensatory tooth size interaction between maxillary canine base area and the summed incisor and postcanine areas was suggested by the significant negative allometric relation between them.     

Dental wear among cercopithecid monkeys of the Taï forest,Côte d'Ivoire

Studies of dental macrowear can be useful for understanding masticatory and ingestive behavior, life history, and for inferring dietary information from the skeletal material of extinct and extant primates. Such studies to date have tended to focus on one or two teeth, potentially missing information that can be garnered through examination of wear patterns across the tooth row. Our study measured macrowear in the postcanine teeth of three sympatric cercopithecid species from the Taï Forest, Côte d'Ivoire (Cercocebus atys, Procolobus badius, and Colobus polykomos), whose diets have been well‐described. Inter‐specific analyses suggest that different diets and ingestive behaviors are characterized by different patterns of wear across the molar row, with Cercocebus atys emphasizing tooth use near P₄‐M₁, P. badius emphasizing a large amount of tooth use near M₂‐M₃, and Colobus polykomos exhibiting wear more evenly across the postcanine teeth. Information regarding differential tooth use across the molar row may be more informative than macrowear analysis of isolated teeth for making inferences about primate feeding behavior. Am J Phys Anthropol 150:655–665, 2013. © 2013 Wiley Periodicals, Inc.     

Folivory, frugivory, and postcanine size in the cercopithecoidea revisited

At a given body mass, folivorous colobines have smaller postcanine teeth than frugivorous cercopithecines. This distinction is a notable exception to the general tendency for folivorous primates to have relatively larger postcanine tooth rows than closely related frugivores. The reason for this anomalous pattern is unclear, but one potential explanation is that the difference in facial size between these two subfamilies confounds the comparison-i.e., it may be that the large postcanine teeth of cercopithecines are a consequence of their large faces. The goal of this study was to test this hypothesis. Phylogenetic comparative methods were used to examine the relationships among postcanine area, facial size, and body mass in 29 anthropoid primates, including eight colobines and eight cercopithecines. Results indicate that there is a strong and highly significant partial correlation between postcanine area and facial size when body mass is held constant, which supports the hypothesis that facial size has an important influence on postcanine size. Moreover, colobines have larger postcanine teeth relative to facial size than cercopithecines. Surprisingly, when facial size is held constant, the partial correlation between postcanine area and body mass is weak and nonsignificant. These results suggest that facial size may be more appropriate than body mass for size-adjusting postcanine measurements in some contexts. A phylogenetic comparative test of the association between diet and relative postcanine size (scaled using facial size) confirms that folivorous anthropoids are characterized by relatively large postcanine teeth in comparison to closely related nonfolivores.     

Evidence of strong stabilizing effects on the evolution of boreoeutherian (Mammalia) dental proportions

The dentition is an extremely important organ in mammals with variation in timing and sequence of eruption, crown morphology, and tooth size enabling a range of behavioral, dietary, and functional adaptations across the class. Within this suite of variable mammalian dental phenotypes, relative sizes of teeth reflect variation in the underlying genetic and developmental mechanisms. Two ratios of postcanine tooth lengths capture the relative size of premolars to molars (premolar–molar module, PMM), and among the three molars (molar module component, MMC), and are known to be heritable, independent of body size, and to vary significantly across primates. Here, we explore how these dental traits vary across mammals more broadly, focusing on terrestrial taxa in the clade of Boreoeutheria (Euarchontoglires and Laurasiatheria). We measured the postcanine teeth of N = 1,523 boreoeutherian mammals spanning six orders, 14 families, 36 genera, and 49 species to test hypotheses about associations between dental proportions and phylogenetic relatedness, diet, and life history in mammals. Boreoeutherian postcanine dental proportions sampled in this study carry conserved phylogenetic signal and are not associated with variation in diet. The incorporation of paleontological data provides further evidence that dental proportions may be slower to change than is dietary specialization. These results have implications for our understanding of dental variation and dietary adaptation in mammals.     

Palatal growth inMacaca nemestrina

A longitudinal study of the palatal growth of 80 male and 81 femaleMacaca nemestrina reveals that male growth rates are greater than female growth rates. In addition, both sexes demonstrate a similar pattern of palatal growth although growth rate differences between sexes probably reflect the larger canine/P₃ apparatus and overall body size of males. Growth of the premaxillary and postmaxillary palatal segments appear to be independent of one another. Palatal growth spurts, obvious in males, exist for two palatal length dimensions. The maxillary tuberosity growth center is postulated to account for more size dimorphism between sexes than the premaxilla growth center.     

Dental eruption in captive-bornCebus apella: From birth to 30 months old

This work reports on the ages of gingival eruption of deciduous and permanent teeth observed from the time of birth until 30 months old, captive-born individuals. All of the animals were born with the protrusive di₁ already through the gingival border. The dmp⁴ were the last teeth of the deciduous series which emerged at 24.5±3.11 weeks in the males and 27.8±2.95 weeks in the females. Significant sexual differences were found between the eruption period of the dpm₂, dmp⁴ (p<0.05), and dpm₄ (p<0.01), with the males being more precocious than the females. The first permanent tooth that emerged, usually, was the M₁ at 13.50±2.12 months in the males, and 14.00±0.82 months in the females. At 30 months of age, not one individual had replaced his deciduous canine or premolar teeth with the permanent ones, and, moreover, the M ₃ ³ had not yet emerged.     

Allometric relations of teeth and jaws in man

Static adult intraspecific allometry of jaws and teeth was investigated in a sample of 100 Negro crania. The relations between tooth area, postcanine surface, incisor surface, and four viscerocranial measures were examined separately for males and females. Our results indicate a marked lack of morphological integration between P-sets within the orofacial subregion and a similar lack of correspondence between jaw size and tooth size. Allometric analyses indicate that mandibular length scales negatively allometric to maxilloalveolar length and to bigonial width, that canine base area scales positively to upper and lower jaw length, and that all the other teeth scale negatively to jaw length. The postcanine surface area was found to be negatively allometric to the canine base area, which in turn scaled isometrically to incisor surface. Hence, any lengthening of the mandible will tend to be associated with a relative shortening of the maxilla, with relatively larger canines and a relative reduction of the cheek teeth.     

Development of the orangutan permanent dentition: Assessing patterns and variation in tooth development

This study examines dental formation and alveolar emergence in a large cross-sectional sample composed primarily of wild-reared orangutans (N = 89) in order to provide information on the development of the permanent dentition in this hominoid and to address questions of variation in individual tooth formation, between teeth and between individuals. All specimens have been radiographed in lateral aspect and stages of crown and root formation recorded for all teeth. The ranges of crown and root formation of I¹₁, C¹₁, P⁴₄, and M³₃ have been calculated relative to the stage of M₁¹ development within a specific tooth quadrant. Then, for each specimen, BMDP scatterplot and nonparametric statistics have been used to graph changes in stages of these teeth relative to M¹₁ stages and to examine relationships between pairs of upper and lower dental counterparts and between teeth of each jaw. Results indicate 1) high correlations between upper and lower tooth pairs and between many of the permanent teeth within individuals, 2) a relatively large range of variability in individual tooth development (multistage ranges relative to M¹₁), 3) greater variation in root development at emergence than earlier reports, and 4) evidence of variability within the sequence emergence pattern of the orangutan. © 1996 Wiley-Liss, Inc.     

Patterns of size variation and correlation in the dentition of the red colobus monkey (Colobus badius)

There have been numerous studies on variability and correlation in dental crown size, but the significance of the resulting patterns remains unclear. Regions of low variation and high correlation have been hypothesized to represent the poles of Butler's morphological fields, to be related to absolute tooth size, or to be related to morphological complexity of the teeth and functional efficiency. Variation and correlation of tooth lengths and breadths were investigated in 138 red colobus monkeys to further assess the relations among size associations, crown morphology, and absolute tooth size. In the maxilla and mandible, the postcanine teeth are the most highly correlated and least variable, followed by the incisors, then the canines. There are also lower correlations between premolars and molars than within either group. While there appears to be a relation between degree of morphological differentiation and levels of correlation and variation, there are no notable differences in the correlation of opponents along the dental arcade, which is the most important functional consideration. This suggests that different levels of correlation and variation within upper or lower teeth are “artifacts” of tooth dimensions that contribute to different geometric designs in different tooth groups as the germs develop. This morphological effect is coupled with the influence of integration fields, indicated by higher variability and lower correlations of the third molar, the largest or most molarized tooth. It is concluded that there are wide functional tolerances in occlusion with respect to the gross dimensions of dental crowns and their interrelationships.     

Fossil remains of Macaca sylvanus florentina (Cocchi, 1872) (Primates, Cercopithecidae) from the Early Pleistocene of Quibas (Murcia, Spain)

The macaque material from the Early Pleistocene site of Quibas (Albanilla, Murcia, Spain), including dentognathic remains, isolated teeth and some postcranial bone fragments, is described. Both metrically and morphologically, this sample must be attributed to Macaca sylvanus (the Barbary macaque). This species is currently distributed through North Africa and Gibraltar, but was much more widely distributed during the Plio-Pleistocene, being represented by several European fossil subspecies. Metrical comparisons of dental size and proportions between extant M. s. sylvanus and fossil Macaca sylvanus florentina from the type locality and other Italian sites are undertaken, in order to classify the remains from Quibas at the subspecies level. The results show that the Quibas sample not only fits the range of variation of M. s. florentina from the type locality, but also differs from the extant Barbary macaque condition in several regards. This permits us to formally attribute the material from Quibas to M. s. florentina. The material described in this paper therefore significantly improves the knowledge of this fossil taxon, particularly regarding the upper dentition, and further confirms the taxonomic distinctiveness of this extinct taxon at the subspecies rank. Taken as a whole, M. s. florentina largely overlaps in dental dimensions with M. s. sylvanus, but differs from the latter by displaying (on average): (1) absolutely longer upper molars (especially M¹ and M³); (2) relatively wider upper molars (especially M¹ and M²); (3) longer M³ as compared with the M²; (4) absolutely longer M₁ and M₃; and (5) relatively narrower M₃.     

A comparative study of tooth and dental arch dimensions in Jewish children of different ethnic descent. I. Kurds and Yemenites

Dental casts of 99 Kurdish and 98 Yemenite Jewish children evenly distributed between the sexes, aged 12 years, were measured for mesio-distal and buccolingual tooth dimensions, and arch depth and width. Dental dimensions showed significant differences between the two groups in certain permanent teeth in mesiodistal length, while in the buccolingual diameter the differences did not reach statistical significance. Dental arch form in Kurdish children was more rounded due to significantly bigger arch width, while arch depth was not significantly different from Yemenites. Intragroup sex differences were found in both groups with reference to arch dimensions, while in the dental parameters they were more strongly expressed in Kurdish children.     

L’orang-outan fossile de Hoà Binh (Viêt-nam) : poids corporel et hypothèse locomotrice

The orang-utan of Hoà Binh (Vietnam): body weight and locomotor hypothesis. The discovery of the first complete skeleton of an adult orang-utan (Pongo pygmaeus), probably a female, in the Hoà Binh province, Vietnam, brings original data about the evolution of these primates. We have predicted the body weight of this orang-utan by using two parameters : dental (crown area of cheek teeth) and skeletal (lengths of femur, radius and tibia). The dental dimensions give plausible predicted estimates of body weights that range between 70.9–112.4 kg for M¹ (with a mean of 89.3 kg) and 67.9–98.1 kg for M₁ (with a mean of 81.6 kg). From the observations of Sugardjito and van Hoof [21] on modern orang-utans, heavy body weights have some influence both on the employment of certain types of locomotion and on travelling heights. To cite this article : A.-M. Bacon, V.T. Long, C. R. Palevol 2 (2003).     

Additional materials of Myanmarpithecus yarshensis (Amphipithecidae, Primates) from the middle Eocene Pondaung Formation

Myanmarpithecus yarshensis is an amphipithecid primate from the middle Eocene Pondaung Formation in Myanmar. It was previously known based on maxillary fragments with P⁴–M³ and mandibular fragments with C–P₃ and M_2–3. This study reports new materials for the genus, including a humeral head fragment, a lingual fragment of the right M², a lingual fragment of the right M³, and a left I¹. These new materials were collected from approximately the same point, and likely belonged to the same individual. The upper molar morphology and size of the new materials show similarity to those of the type specimen, indicating that the new materials can be assigned to M. yarshensis. The humeral head is the first postcranial element that is associated with dental materials for amphipithecids. The morphological similarity between the previously reported larger humerus and this specimen confirms the assignment of the former specimen to Amphipithecidae and suggests common locomotor adaptations in the family. The upper central incisor is large relative to the molar fragments, but is within the variation among extant platyrrhines. The tooth is spatulate-shaped and high crowned, and lacks the mesial process, indicating similarity to I¹ of haplorhines and clear differences from that of adapoids. It has been suggested that amphipithecids, including Myanmarpithecus, have affinities with notharctine adapoids, but the morphology of I¹ does not support the notharctine hypothesis of the Amphipithecidae.     

Evolutionary changes in the masticatory complex following the transition to farming in the southern Levant

A post-Pleistocene reduction trend in the dimensions of the masticatory complex followed the transition to agricultural lifestyle in several world regions. A major limitation of previous studies is large temporal gaps between the analyzed skeletal populations, which do not allow the detection and analysis of a diachronic morphological transition. In this work, we analyze a large number of specimens from the southern Levant, where agriculture first emerged in situ and for which there is a good diachronic sequence of the shift from a hunting-gathering way of life to a food producing, farming economy (12,000-7,000 uncalibrated bp). Changes in the masticatory complex are examined in the context of three prevailing dental reduction models: the Probable Mutation Effect (Brace,1963; Brace and Mahler,1971), Increasing Population Density Effect (Macchiarelli and Bondioli,1986) and Selective Compromise Effect (SCE) (Calcagno,1989). A series of linear regressions of dimension vs. time and coefficients of variation for each dimension are analyzed. Our results indicate significant reduction in the buccolingual but not mesiodistal dental dimensions and in the ramus breadth and anterior height dimensions of the mandible but not in its overall size. These findings, taken together with low coefficients of variation for the buccolingual dimensions, suggest selective pressure resulting in reduction of specific dimensions. The observed trend is in partial accordance with the SCE but differs from the trends observed in other regions, and is therefore best explained as a region-specific variant of the SCE.