An improved technique for the efficient construction of gene libraries by partial filling-in of cohesive ends

For the preparation of gene libraries, DNA from lambda EMBL3 phage was digested with SalI and EcoRI, and the cohesive ends partially filled-in by addition of dTTP, dCTP and Klenow fragment of DNA polymerase I (PolIk). Genomic DNA was cleaved partially with Sau3A and subsequently incubated with dATP, dGTP and PolIk. The phage and genomic DNAs were then mixed and ligated. The recombinant DNAs were packaged in vitro. The efficiency of packaging was 10(5)-10(6) of infectious phage lambda particles per microgram of the genomic DNA (as compared to approx. 10(7) per microgram for the wild-type lambda DNA). This procedure is very rapid and requires only microgram quantities of genomic DNA for preparing an entire gene library. The other important advantage is that multiple independent insertions of genomic DNA cannot occur in a single recombinant phage and self-ligation of phage DNA is blocked. It is also applicable for other SalI-containing vectors.     

A new host-vector system allowing selection for foreign DNA inserts in bacteriophage lambda gtWES.

An improved vector (lambda gtWES.T5-622) for EcoRI fragments has been derived from EK2 vector lambda gtWES.lambdaB' by replacing the lambda B fragment with two identical 1.1 Md fragments from the pre-early region of bacteriophage T5. The new vector has two advantages which facilitate elimination of parental-type recombinants in an in vitro recombination experiment. Firstly, the 1.1 Md insert is too small to be re-inserted into lambda gtWES in a single copy. Secondly the 1.1 Md T5 fragment carries T5 gene A3 which prevents growth of phage retaining this fragment when the Excherichia coli host carries plasmid ColIb. Thus, essentially all plaques are due to phage with donor DNA inserts and are free of T5 DNA fragments. The size usually given as the theoretical minimum size for insertion into the lambda gt series of vectors is 0.66 Md. We have shown that this size is an underestimate and that the lower limit is about 1.6 Md. A precise estimate is difficult since there is strong selection, among phage having small inserts, for those which have acquired additional genetic material by duplication of the lambda DNA.     

Construction and study of a new type of phage lambda DNA vector molecule]

A group of lambda mutants (mutants lambda 0) harbouring lesser number of EcoRI restriction sites on DNA molecules was selected. lambda3-1 recombinant (genotype lambdab221amgamma210Sr1lambda3+c-Px) was created by crosses of lambda02 phage with other lambda mutants. This phage DNA may be used as a vector molecule which makes it possible to select easily phages harbouring insertions of EcoRI DNA fragments. The maximal size of DNA fragment, the insertion of which would not decrease lambda3-1 viability, is 7.7 megadaltone. Lambda3-1 DNA has three regions heterological to lambda DNA, two of which probably include sites SRIlambda4 and SRIlambda5 and some juxtaposed genes. For example, Ptgene of lambda phage in juxtaposition with site SRIlambda4 is substituted by Px gene on the lambda3-1 DNA molecule.     

Use of conversion adaptors to clone antigen genes in lambda gt11

A strategy has been devised and tested to employ EcoRI conversion adaptors for cloning 5' cohesive-ended restriction fragments into the unique EcoRI site of the lambda gt11 expression vector. Five lambda gt11 chromosomal libraries were constructed with Rickettsia tsutsugamushi genomic DNA digested with restriction enzymes generating five different 5' cohesive ends. Recombinant phage yields as high as 10(7) plaque forming units were achieved without amplification of the five libraries. Sequences encoding epitopes of all eight R. tsutsugamushi polypeptide antigens, previously identified by Western blot analysis, were obtained in the five lambda gt11 expression libraries. Recombinant antigen expression was dependent on lambda gt11 lac promoter induction in 39% of the recombinants assayed. This method significantly improves the efficiency of genomic lambda gt11 library construction by eliminating blunt-ended ligation and simplifying the removal of unligated EcoRI-ended oligonucleotides.     

Phasmids as effective and simple tools for construction and analysis of gene libraries

Phasmid lambda pMYF131, a hybrid of phage lambda vectors and plasmid pUC19, was constructed. The phasmid and its derivatives were shown to be efficient vectors for construction and analysis of gene libraries in Escherichia coli cells. The lambda pMYF131 DNA molecule contains all the genes and regions essential for phage lytic development. The plasmid cannot be packaged either in the monomeric or the oligomeric form due to its specific length. Elongation of the DNA molecule by ligation with fragments of foreign DNA can make it packageable and this is easily detected by plaque formation. Hence, the procedures used to construct genomic libraries can be simplified by selection of only recombinant DNA molecules just at the time and on the basis of their packaging in vitro. The output of recombinant clones per vector molecule was several times higher for vector lambda pMYF131, compared to phage vector lambda L47.1AB, and attained 3 x 10(6) clones per micrograms DNA. Vector and recombinant phasmids can be obtained in large quantities in plasmid form. lambda pMYF131 contains nine unique restriction sites which allow the cloning of DNA fragments with blunt ends and of fragments with various types of cohesive ends, obtained by digestion with 14 prototype restriction enzymes. The maximal size of the cloned DNA fragments is approx. 20 kb for lambda pMYF131. Phasmid vectors were used to construct libraries of bovine, pig and quail genomes, and genomic libraries of 17 species of bacteria. Application of suitable methods allowed the identification 13 individual genes within these libraries.     

Construction of a hybrid bacteriophage-plasmid recombinant DNA vector.

A phage-plasmid hybrid was constructed for use as a recombinant DNA vector, allowing the propagation of cloned EcoRI restriction endonuclease fragments of about 2 X 10(6) to 11 X 10(6) daltons. The colicin E1 plasmid replicon was fused to the left arm of a lambdagt generalized transducing phage with a thermolabile repressor, yielding a genome which could be replicated either by phage lambda functions or via the colicin E1 plasmid replicon. At the nonpermissive temperature, phage functions were derepressed and phage growth occurred lytically. Alternatively, at the permissive temperature, lambda functions were repressed and the vector replicated as a covalently closed circular plasmid. The phage-plasmid hybrid vector could be maintained at a copy number determined by the colicin E1 plasmid replicon and was also sensitive to amplification after chloramphenicol treatment. An EcoRI fragment of Escherichia coli DNA encoding genes of the arabinose operon also was inserted into the central portion of the vector.     

A phosphate group at the cos ends of phage lambda DNA is not a prerequisite for in vitro packaging: an alternative method for constructing genomic libraries using a new phasmid vector, lambda pGY97

It is shown here that the phosphate groups at the cos ends of phage lambda DNA are not a prerequisite for in vitro packaging. Molecules with phosphatase-treated cos ends are packaged in vitro as efficiently as native lambda DNA. This observation can be used for an alternative strategy to improve the efficiency of gene library construction, since cos-cos ligation decreases in vitro encapsidation and infectivity. Dephosphorylated cos ends and a new phasmid vector lambda pGY97 have been used to construct a representative gene bank of alfalfa in a Mcr- (5-methylcytosine restriction deficient) Escherichia coli host strain. These recombinant clones can be propagated as phages or more conveniently as plasmids in recA- E. coli, to prevent possible homologous recombination events between repetitive sequences of the insert that would otherwise interfere with clone stability. The 5-19-kb inserts can be easily recloned as plasmids from the recombinant phasmids with simple EcoRI digestion and re-ligation. This observation also implies that the construction of gene libraries in cosmid vectors can be made more efficient if cos-cos ligates were cleaved by lambda terminase just before in vitro packaging.     

High-density functional display of proteins on bacteriophage lambda

We designed a bacteriophage lambda system to display peptides and proteins fused at the C terminus of the head protein gpD of phage lambda. DNA encoding the foreign peptide/protein was first inserted at the 3' end of a DNA segment encoding gpD under the control of the lac promoter in a plasmid vector (donor plasmid), which also carried lox P(wt) and lox P(511) recombination sequences. Cre-expressing cells were transformed with this plasmid and subsequently infected with a recipient lambda phage that carried a stuffer DNA segment flanked by lox P(wt) and lox P(511) sites. Recombination occurred in vivo at the lox sites and Amp(r) cointegrates were formed. The cointegrates produced recombinant phage that displayed foreign protein fused at the C terminus of gpD. The system was optimised by cloning DNA encoding different length fragments of HIV-1 p24 (amino acid residues 1-72, 1-156 and 1-231) and the display was compared with that obtained with M13 phage. The display on lambda phage was at least 100-fold higher than on M13 phage for all the fragments with no degradation of displayed products. The high-density display on lambda phage was superior to that on M13 phage and resulted in selective enrichment of epitope-bearing clones from gene-fragment libraries. Single-chain antibodies were displayed in functional form on phage lambda, strongly suggesting that correct disulphide bond formation takes place during display.This lambda phage display system, which avoids direct cloning into lambda DNA and in vitro packaging, achieved cloning efficiencies comparable to those obtained with any plasmid system. The high-density display of foreign proteins on bacteriophage lambda should be extremely useful in studying low-affinity protein-protein interactions more efficiently compared to the M13 phage-based system.     

A new selective phage cloning vector, lambda 2001, with sites for XbaI, BamHI, HindIII, EcoRI, SstI and XhoI

An improved bacteriophage lambda cloning vector, lambda 2001, has been constructed. The phage includes a 34-bp polylinker oligonucleotide which introduces cleavage sites for XbaI, SstI, XhoI, EcoRI, HindIII and BamHI, and can accommodate 10-kb to 23-kb fragments. Inserts that destroy the BamHI or XhoI cloning sites may be recovered by excision at flanking sites in the polylinker sequence. Insertion of foreign DNA into lambda 2001 generates phage with a Spi- phenotype. The recombinant phage are able to grow on P2 lysogens but the parental vector phages are not. In the course of this work, the polylinker sequence was also introduced into M13mp8. This produced a new vector, M13mp12, with cloning sites for EcoRI, SmaI, XbaI, SstI, XhoI, BamHI, and HindIII.     

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: oriented and quantized in vitro packaging of DNA protein gp3.

The assembly of phage phi 29 occurs by a single pathway, and the DNA protein (DNA-gp3) of "packaging intermediates" can be obtained after DNase I interruption of in vitro complementation. A broad spectrum of DNA molecules of variable length was isolated from DNase I-treated proheads. Restriction endonuclease EcoRI digestion and electrophoretic analysis of these DNA molecules suggested that DNA-gp3 packaging was oriented with respect to the physical map and was a complex process. Proteinase K-treated exogenous DNA was not packaged. When exogenous DNA-gp3 was predigested with the restriction endonucleases BstEII. EcoRI, HpaI, and HpaII, the left-end fragments, ranging in size from 8 to 0.9 megadaltons, were selectively and efficiently packaged. During in vivo and in vitro assembly, DNA-gp3 is packaged into proheads, the "core-scaffolding" protein gp7 exits from the particles, and the DNA-filled heads assume the angular morphology of phage phi 29. The packaging of a 4.1-megadalton DNA-gp3 left-end fragment (one third of the genome) resulted in the exit of gp7 and the transition to angularity.     

Construction and analysis of recombinant lambda phages containing mitochondrial DNA fragments.

Rat mtDNA has a molecular length of about 16 kilobase (kb) pairs and is cleaved into seven fragments by restriction endonuclease EcoRI. These fragments were cloned in Escherichia coli K-12 host using lambda gtWES.lambda B' (lambda gtWES.lambda B, for short, in this paper) as a vector. Recombinant DNAs containing one or a few fragments of the mtDNA were transfected to CaCl2-treated E. coli, and the plaques containing specific recombinant phages were selected. DNA amplified in the recombinanat phage lambda gt.mt was shown to contain the same restriction endonuclease cleavage sites as those found in the mtDNA. Present results permitted the DNA sequencing of any portion of the mitochondrial genome.     

Development of a short-term, in vivo mutagenesis assay: the effects of methylation on the recovery of a lambda phage shuttle vector from transgenic mice.

Transgenic mice suitable for the in vivo assay of suspected mutagens at the chromosome level have been constructed by stable integration of a lambda phage shuttle vector. The shuttle vector, which contains a beta-galactosidase (beta-gal) target gene, can be rescued from genomic DNA with in vitro packaging extracts. Mutations in the target gene are detected by a change in lambda phage plaque color on indicator agar plates. Initial rescue efficiencies of less than 1 plaque forming unit (pfu)/100 micrograms of genomic DNA were too low for mutation analysis. We determined the cause of the low rescue efficiencies by examining primary fibroblast cultures prepared from fetuses of lambda transgenic animals. The rescue efficiency of 5-azacytidine-treated cells increased 50-fold over non-treated controls indicating that methylation was inhibiting rescue. The inhibitory role of methylation was supported by the observation that mcr deficient E. coli plating strains and mcr deficient lambda packaging extracts further improved lambda rescue efficiency. Present rescue efficiencies of greater than 2000 pfu/copy/micrograms of genomic DNA represent a 100,000-fold improvement over initial rescue efficiencies, permitting quantitative mutational analysis. The background mutagenesis rate was estimated at 1 x 10(-5) in two separate lineages. Following treatment with the mutagen N-ethyl-N-nitrosourea (EtNU), a dose dependent increase in the mutation rate was observed in DNA isolated from mouse spleen, with significant induction also observed in mouse testes DNA.     

Protection of particular cleavage sites of restriction endonucleases by distamycin A and actinomycin D.

It is shown here that distamycin A and actinomycin D can protect the recognition sites of endo R.EcoRI, EcoRII, HindII, HindIII, HpaI and HpaII from the attack of these restriction endonucleases. At proper distamycin concentrations only two endo R.EcoRI sites of phage lambda DNA are available for the restriction enzyme--sRI1 and sRI4. This phenomenon results in the appearance of larger DNA fragments comprising several consecutive fragments of endo R.EcoRI complete cleavage. The distamycin fragments isolated from the agarose gels can be subsequently cleaved by endo R.EcoRI with the yield of the fragments of complete digestion. We have compared the effect of distamycin A and actinomycin D on a number of restriction endonucleases having different nucleotide sequences in the recognition sites and established that antibiotic action depends on the nucleotide sequences of the recognition sites and their closest environment     

Improved in vitro packaging of coliphage lambda DNA: a one-strain system free from endogenous phage

In previous systems for in vitro packaging of lambda DNA, phages are produced from the packaging components as well as from added DNA. We have developed a new genetic strategy for in vitro packaging that bypasses this endogenous phage problem. Our system employs a single bacterial strain whose lambda prophage codes for all of the packaging proteins but is deleted for cos, the packaging origin. Crude extracts of the single lysogen: (i) are virtually free from endogenous phages, (ii) package added lambda DNA efficiently and (iii) are easy to prepare. Using the cos- in vitro packaging system we show that packaging of lambda linear monomers is a second-order reaction, but that packaging from concatemers prepared by annealing or ligation is first order. We conclude that in our cos- system, linear monomers are a poor substrate for in vitro packaging but that packaging from concatemers works well.     

Generation of a 50,000-member human DNA library with an average DNA insert size of 75-100 kbp in a bacteriophage P1 cloning vector

A bacteriophage P1 cloning system that permits the isolation and amplification of cloned DNA fragments as large as 100 kbp was described previously. We have now utilized a similar system to generate a 50,000-member human DNA library with DNA inserts ranging in size from 75 to 100 kbp. Two major obstacles were overcome in constructing the library. The first concerned the mcrAB restriction system of Escherichia coli, which degrades DNA containing MeC and interferes with the recovery of cloned human DNA inserts. In the P1 cloning system, the effect of the Mcr restriction activity is to decrease recovery of cloned inserts by about 35-fold when the activity is in the host cell line and by about 3-fold when the activity is in the cells used to prepare the packaging extract. To circumvent this problem we inactivated, by mutation, the McrAB proteins in both components of the cloning system. The second obstacle concerned the preferential cloning of small DNA fragments from a population of fragments ranging in size from 20 to 100 kbp. To deal with this problem we first modified the P1 lysogen used to prepare the in vitro head-tail packaging extract so that it would produce 12 times as many large P1 heads (head capacity about 110 kbp) as small P1 heads (head capacity about 45 kbp). We then restructured the P1 cloning vector so that it could be used to produce vector "arm" fragments that could be ligated to insert DNA at only one end. This prevented the formation of long concatamers consisting of alternating units of vector and insert DNA and prohibited the packaging of small inserts in large phage heads. Using the insert-biased large head extract, the arms vector, and size-selected human DNA fragments, we showed that as much as 90% of recovered transformants contained inserts in the desired high molecular weight range.     

RNA-mediated specificity of DNA packaging into hybrid lambda/phi 29 proheads.

A small RNA (pRNA, 174 nt) is known to be essential for DNA packaging in bacteriophage phi 29. However, in an in vitro DNA packaging system based on hybrid lambda/phi 29 proheads (made up of head proteins from phage lambda and connectors from phage phi 29), the specificity of DNA packaging is lost, and different RNA molecules fulfil the requirements for DNA packaging, albeit with less efficiency than phi 29 pRNA. Competition assays with RNAs from different sources have shown that phi 29 connectors bind preferentially pRNA. An increase in the efficiency of phi 29 DNA packaging into hybrid proheads induced by phi 29 pRNA is observed because, when phi 29 pRNA is incubated with hybrid proheads, phi 29 DNA is packaged more efficiently than other DNAs of similar length. Furthermore, when hybrid proheads carrying phi 29 pRNA are incubated with a mixture of DNAs from different sources, phi 29 DNA is selectively packaged, thus indicating that phi 29 pRNA determines the specificity of DNA packaging.