水稻卷叶细胞学与分子机制研究进展

卷叶性状是水稻(Oryza sativa)重要的育种指标之一。研究表明,水稻叶片适度卷曲对植株的光合作用、株型及增产等均具有重要作用。该文综述了水稻叶片卷曲的相关研究进展,对水稻叶片卷曲的细胞学形成机制和相关调控基因的分子机制进行了阐述,以期深入阐明水稻叶片卷曲的细胞学和分子机制,促进卷叶性状在水稻育种中的应用。     

叶面喷施硅和磷对水稻及其抗白背飞虱的影响

【目的】硅可以增强植物的抗病性和对环境胁迫的耐受性,本实验检测了水稻叶面喷施硅和磷后叶片中硅和两种次生物质含量的变化以及喷硅对白背飞虱Sogatella furcifera种群的影响,旨在阐明外源元素施用是否会提高水稻的抗虫性。【方法】采用对分蘖期水稻进行硅肥、磷肥、和两者混合的喷施处理,测定比较了水稻叶片正面和反面硅含量、草酸含量和可溶性糖含量,同时检测了喷施硅肥后水稻叶片硅化细胞数量和取食处理水稻后白背飞虱种群增长的参数。【结果】20和40 mg/L 硅或硅+磷混合施用后,水稻叶片中的硅含量比对照显著增加(P<0.05)。在40 mg/L硅+ 40 mg/L磷喷施处理后,水稻叶片正反面的硅含量分别比对照增加了116%和104.4%。扫描电镜结果显示,处理后的水稻叶片上气孔周围硅化细胞明显增加。此外,硅和磷喷施后3 d和6 d,水稻叶片草酸含量显著增加(P<0.01)。40 mg/L硅处理后的水稻上饲养的白背飞虱产卵量与对照相比明显下降(P<0.05)。【结论】硅+磷喷施处理促进水稻叶片抗虫物质含量增加,硅喷施抑制了白背飞虱的产卵量。     

水稻叶片衰老相关基因的研究进展

水稻叶片的衰老是制约杂交稻产量提高的主要因素之一,有数据表明水稻籽粒灌浆所需营养物质的60%～80%来自叶片的光合作用,实践证明叶片每推迟1天衰老,产量可提高产1%左右.因此,对叶片衰老的形态、生理生化及其相关分子机理等进行研究具有重要的现实意义.近年来水稻叶片衰老的相关研究表明,叶片的衰老是一个受众多因素影响的复杂过程,在这个过程中叶片发生了巨大的形态与生理生化变化,而这些变化均离不开基因的调控作用.大量实验结果表明:在衰老过程中,叶片细胞有选择地启动或增强某些基因(叶片衰老相关基因)的表达,而关闭或减弱另一些基因(衰老下调基因)的表达,由此来调控叶片衰老的进程.目前研究者已在研究衰老突变体等相关的材料中发现了许多与水稻叶片衰老有关的基因.本文重点概述了近年来水稻叶片衰老相关基因的研究状况,并对未来研究方向等问题做了思考与探讨,以期能为开展进一步的研究工作提供参考.     

水稻叶片的电镜制样技术探讨

水稻叶片与其它植物材料相比,具有表面乳突多、角质层厚且有蜡质复盖等不同的细胞学特征,用电镜研究其超微结构时有着特殊的制样要求。我们在研究钾营养水平对水稻光合机构功能的效应过程中,对广陆矮4号等品种水稻叶片进行了详细观察,在制样方法上作了部分改进,获得了较为理想的效果。     

杂交水稻开花结实期间叶片衰老

在杂交水稻开花期间,通过剪去穗部部分枝梗和叶片等处理,形成不同的库源比,叶片衰老的生理生化指标变化和结实率的测定表明,杂交水稻组合的库源矛盾大,叶片衰老快;但谷粒数与旗叶面积比不一定高,降低库源比,能明显减缓杂交水稻叶片中蛋白质、叶绿素含量及倒3、4、5片叶叶绿素含量的平均值与旗叶叶绿素含量的比率的下降和丙二醇含量的升高。这些都说明杂交水稻叶片功能早衰与其库源矛盾较大有关。     

水稻叶片衰老过程中氨肽酶活性的变化

水稻叶片中存在着氨肽酶,其最适反应pH和最适反应温度分别为8.2℃和40℃,酶促反应的产物量在最初30min内与时间呈直线相关。 水稻叶片衰老过程中叶绿素和蛋白质含量下降,而氨肽酶比活上升;用植物激素延缓或促进叶片衰老蛋白质降解的同时也抑制或促进了氨肽酶比活的上升,说明氨肽酶在水稻叶片衰老蛋白质降解过程中起一定的作用。根据水稻叶片衰老过程中大分子化合物和叶片外部形态的变化,可将叶片衰老过程划分为缓衰期、急衰期和竭衰期。     

一种简便快速的制备水稻基因组DNA PCR模板的方法

目的：发展一种简便快速的制备水稻基因组DNA PCR模板的方法。方法：用枪头捣碎水稻叶片代替液氮研磨法提取水稻基因组DNA作PCR模板,在去污剂SDS和表面活性剂TrionX-100的存在下在沸水中煮沸10min,然后取上清扩增微管蛋白（TubA1）基因内含子。结果：发现在利用煮沸法提取水稻基因组DNA的过程中,用枪头捣碎叶片可代替液氮碾磨,加入0.1%表面活性剂TrionX-100煮沸叶片对制备模板有促进效果,得到了预期的PCR片断。结论：该方法快速、简便、经济,具有良好的重复性与特异性,便于自动化。     

水稻叶片对镉胁迫响应的蛋白质差异表达

为揭示水稻镉抗性的分子机理,以抗镉水稻品种P1312777和镉敏感水稻品种IR24为材料,在镉离子浓度为0(对照)、50和100 μmol·L-1条件下水培处理7 d,应用蛋白质组学方法分析了2种水稻叶片对镉胁迫响应的蛋白质差异表达.结果表明:镉胁迫下水稻PI312777叶片中共检测到差异表达蛋白质点31个,通过MALDI-TOF/MS分析,鉴定了其中的24个蛋白质(包括20个不同蛋白质,4个重复检出蛋白质);IR24叶片中共检测到差异表达蛋白质点19个,其中15个蛋白质得到鉴定.PI312777叶片鉴定出的20个蛋白质覆盖了IR24叶片鉴定的15个蛋白质,前者有4个与光合作用相关,11个与细胞防御代谢相关,3个与其他代谢相关,2个为功能未知蛋白.与对照相比,不同浓度镉胁迫下,抗镉水稻PI312777叶片中热激蛋白、谷胱甘肽还原酶、蛋白酶体α亚基6型、果糖1,6-二磷酸醛缩酶、硫氧还蛋白和DNA重组修复蛋白均上调表达;镉敏感水稻IR24叶片中热激蛋白、谷胱甘肽还原酶、蛋白酶体α亚基6型的表达无显著差异,果糖1,6-二磷酸醛缩酶和硫氧还蛋白则下调表达.此外,DNA重组修复蛋白仅在镉胁迫的PI312777叶片中表达.水稻PI312777比IR24具有更强的镉抗性与这些差异表达的蛋白质密切相关.     

水稻铁害和应激乙烯释放的关系

在热带地区的水稻栽培中,常遇到水稻青铜病（ｂｒｏｎｚｉｎｇ）的危害．已知它是由水田中高浓度的亚铁离子所引起,故又叫铁害．但至今没有可靠的生理诊断指标用于抗性品种的筛选．本文研究了铁害与应激乙烯释放的关系,试图以应激乙烯的释放作为铁害的生理诊断指标．试验用两种方法模拟水稻致病．第一种方法是将水稻离体叶片的剪口端浸入ＦｅＳＯ４溶液中,靠叶片蒸腾作用吸收Ｆｅ＋＋而致病．另一种方法是在水培培养液中加入ＦｅＳＯ４通过水稻根系吸收Ｆｅ＋＋而致病．研究结果表明,当处理离体叶片时,发病强度和应激乙烯释放量呈显著相关,但叶片内铁含量的增加与发病强度和应激乙烯释放都没有相关性．而处理完全植株时,叶片中乙烯释放几乎不受影响．当部分或全部切除根时,叶片中乙烯释放则可被亚铁离子激发。表明水稻根系限制了Ｆｅ＋＋的吸收速率,而Ｆｅ＋＋进入叶组织的速率又决定应激乙烯的释放和组织的伤害程度．因此,叶片应激乙烯的释放作为铁害的生理诊断指标只有在当根系受到某种伤害时才可能适用,譬如移栽和毒性土壤等因素造成的根系的伤害．     

外源抗坏血酸对臭氧胁迫下水稻叶片膜保护系统的影响

在田间原位条件下,运用OTCs（open top chamber）装置研究了外源抗坏血酸（exogenous ascorbate acid,ExAsA）对臭氧（O3）胁迫下水稻（Oryza Sativa L.）叶片膜保护系统的影响.研究发现,O3胁迫下的水稻叶片经过ExAsA处理后叶绿素a含量显著升高,而叶绿素b含量变化不明显;相对于对照,经ExAsA处理后的水稻叶片过氧化氢（H2O2）和丙二醛（MDA）含量及相对电导率（REC）均降低,超氧化物岐化酶（SOD）和抗坏血酸过氧化物酶（APX）活性明显提高,抗氧化剂类胡萝卜素（Carotene）含量升高.这表明,ExAsA改善了O3胁迫下水稻叶片的抗氧化系统功能,减少了叶片中活性氧（activity oxygen species,AOS）的积累,抑制了脂质过氧化（lipid peroxidation,LP）,延迟了O3对水稻叶片的老化作用,提高了水稻叶片对O3危害的抗性.     

膜分离技术在寡糖制备与分离中的应用*

寡糖是多糖经过降解后得到的小分子活性物质,具有抗氧化、抗肿瘤、抗病毒和免疫调节等多种生物活性,是功能食品开发领域研究的热点。目前,寡糖的分离和制备主要采用离子交换色谱、凝胶渗透色谱以及两者联用的方法,分离时间长、制备成本高,难以实现寡糖的规模化分离和制备。膜分离技术(membrane separation technology,MST)是一种利用膜的选择性渗透作用,实现两组分或者多组分分离的技术,具有操作简单、分离效果好、高效节能等优点,特别是能够直接放大应用于规模化的分离工程,因此在寡糖等小分子的分离和制备等方面具有巨大的应用潜力。系统总结了膜分离技术在寡糖分离与制备领域的最新进展,综述了用于分离和制备寡糖的膜分离技术分类、分离工艺及其应用现状,并对目前膜分离技术用于大规模分离和制备寡糖过程中面临的挑战进行了讨论。     

影响sc镍钛器械分离的相关因素分析

摘要 目的：分析影响sc镍钛器械分离的相关因素。方法：收集2020年1月至2022年4月在本院接受根管治疗的病例的离体牙。据研究目的和内容设计一般调查表收集临床资料。采用Schneider法测定根管弯曲度。结果：本次研究共收集到10047例病例,涉及22306个根管。其中236例病例（247根镍钛器械）发生器械分离,分离率为2.35%。其中有205例镍钛器械分离发生在磨牙,分离率为4.29%。有106例镍钛器械分离发生在上颌,分离率为1.83%;有130例镍钛器械分离发生在下颌,分离率为3.06%,两者相比差异具有统计学意义（x²=77.128,P<0.001）。轻度弯曲组镍钛器械分离率为0.32%,中度弯曲组镍钛器械分离率为1.04%,重度弯曲组镍钛器械分离组为3.46%,极重度弯曲组镍钛器械分离率为5.82%;随着根管弯曲度的增加,镍钛器械分离率呈明显上升趋势（z=291.883,P<0.001）。结论：sc镍钛器械分离率为2.35%,下颌磨牙根管预备中,器械分离发生率最高,根管弯曲度对器械分离发生也具有一定影响。     

Separation of fructose and glucose mixture by zeolite Y

Na-, K-, Ba-, and Ca-Y were employed for the separation of fructose and glucose in an adsorption column. Effects of temperature, solvent flow rate, amount of mixture injection, and exchangeable cations on the separation were investigated. Efficiency of separation was used as a criterion to characterize the effectiveness of the separation. The transport and kinetic parameters for the column separation were also presented. From simple pulse experiments and moment analysis, the obtained process information of equilibrium and dynamic parameters might be used to design, operate, and control the separation column. (c) 1992 John Wiley & Sons, Inc.     

FILAMENT FORMATION IN THE DIATOM MELOSIRA GRANULATA1

The frequency and position of separation valves in filaments of Melosira granulata were observed both in laboratory cultures and in natural habitats. The numerical relationship between mean filament length in a population and the proportion of separation valves produced (the separation valve index-SVI) has also been determined. The data indicate that filament length is controlled through the production of separation valves and that the SVI gives an indication of the mean filament length. Two series of cell divisions (the first producing the separation valves) are necessary before separation of the filament can occur. Paris of separation valves occur predominantly towards the middle of the filament. We suggest that the SVI may prove to be a useful indicator of mean filament length, and hence of ecological change, even when the filaments are no longer intact, as, for example, in sediment core samples and on permanent slides of acid-cleaned collections.     

Asymmetrical spondylolysis

The objective of this study was to examine examples of spondylolysis in which the pattern of separation was clearly asymmetrical, in order to learn more about the process of bone separation that produces this condition. Although the primary focus was on unilateral complete separation, examples of asymmetry represented by incomplete separation and by complete bilateral separation where the separation sites are in different locations on the two sides were included. Two collections were used, one consisting of Canadian Inuit skeletons curated at the Canadian Museum of Civilization, and the other of 48 individual examples of asymmetrical spondylolysis from sites in a variety of localities curated by several different institutions. The first collection was studied primarily to observe early manifestations of spondylolysis, particularly incomplete separation, while various patterns of asymmetrical complete separation were the focus of the second. The results indicate that asymmetry is part of the earliest osteological picture of spondylolysis, with right-sidedness predominating, a condition perhaps related in some way to handedness. The right-side predominance appears to decrease with age. The ratio of unilateral to bilateral separation ranges from 3-33% in different studies, and a significant number of the unilateral separations have spina bifida occurring in the same vertebra. Overall, the specimens examined here, considered along with clinical cases, nicely illustrate a progression of spondylolysis. A unilateral separation may heal, it may progress to bilateral separation, or it may remain as a permanent condition, producing a pattern of degenerative changes that can include spondylolisthesis. A unilateral healing of bilateral complete separation is likely a rare phenomenon, at least after the separations have reached a certain level of maturity.     

超声强化生化分离技术应用进展

将超声波的空化作用、热效应、机械作用应用于生化分离技术中,可提高分离效率、缩短时间、简化操作过程。综述了超声波在生化分离如天然成分提取、沉淀、萃取、结晶等各种分离方法中的应用现状,并探讨了超声波与分离方法结合的发展前景。     

现代生物工程分离提取技术在海洋生物资源开发上的应用

本文综述了在海洋资源开发上应用的现代生物工程分离技术。介绍了最新的分离提取技术如制备型和生产型色谱技术、超临界萃取技术、膜分离技术、毛细管电泳技术、酶工程技术等。从海洋生物资源中提取有用的生物活性物质,需要符合特定要求的现代生物工程技术。其中柱层析技术和超临界萃取技术是海洋生物活性物质分离提取技术中的主要部分。     

我国生物丁醇分离提取技术研究进展

本文概述了目前国内外生物丁醇生产体系中的分离提取技术,包括液液萃取、气提、吸附、精馏和渗透汽化技术等的应用研究现状,详细阐述了上述几种方法在分离提取生物丁醇方面的优势与不足,对各类方法的分离特性和效果进行了比较,并展望了生物丁醇分离提取技术的发展前景。     

Social context and reaction to separation in peer-reared pigtail macaques: Some preliminary observations

The social environment affects both behavioral and physiological responses to separation from the mother. Less information is available on the impact of the social environment on the response to separation in peer-reared infant monkeys. This study reports the responses of peer-reared pigtail macaque infants to repeated separations, and the impact of social versus isolation housing during the separation. The responses of two pairs of monkeys were studied during four three-day separations. One of each pair was housed in isolation during the separation, and the other was with another pair of peers, with whom they had been living for one month prior to the separation. The isolation-housed peer responded to the separation with behavioral agitation, but no depression. The socially-housed peer's behavior did not differ from baseline during the separation. During successive reunions, all the separated monkeys, regardless of housing condition, exhibited declining levels of behaviors related to maintaining proximity to their attachment figure. Although the number of subjects is small, the results suggest that the presence of social support, in the form of a familiar peer, can ameliorate the response to separation, and that with repeated separations the responses of the monkeys changes significantly.     

Microfluidic separation of DNA

DNA separation is important for numerous applications in biotechnology and medicine. Efforts to improve DNA separation in microdevices have led to advances in capillary electrophoresis and the development of novel separation strategies. Current research on microcapillary electrophoresis materials is focused on the development of separation matrices with low injection viscosities and wall-coating capabilities. Microcapillary injector geometries are being designed to allow increased control of sample plug volumes. Novel separation strategies using entropic traps, arrays of pillars and Brownian ratchets are also being developed.