Synthesis of 2'-modified oligonucleotides containing aldehyde or ethylenediamine groups

Oligonucleotides carrying 2'-aldehyde groups were synthesized and coupled to peptides containing an N-terminal cysteine, aminooxy or hydrazide group to give peptide-oligonucleotide conjugates in good yield. The synthesis of a novel phosphoramidite reagent for the incorporation of 2'-O-(2,3-diaminopropyl)uridine into oligonucleotides was also described. Resultant 2'-diaminooligonucleotides may be useful intermediates in further peptide conjugation studies.     

Efficient surface patterning of oligonucleotides inside a glass capillary through oxime bond formation

The efficient surface patterning of oligonucleotides was accomplished onto the inner wall of fused-silica capillary tubes as well as on the surface of glass slides through oxime bond formation. The robustness of the method was demonstrated by achieving the surface immobilization of up to three different oligonucleotide sequences inside the same capillary tube. The method involves the preparation of surfaces grafted with reactive aminooxy functionalities masked with the photocleavable protecting group, 2-(2-nitrophenyl) propyloxycarbonyl group (NPPOC). Briefly, NPPOC-aminooxy silane 1 was prepared and used to silanize the glass surfaces. The NPPOC group was cleaved under brief irradiation to unmask the reactive aminooxy group on surfaces. These reactive aminooxy groups were allowed to react with aldehyde-containing oligonucleotides to achieve an efficient surface immobilization. The advantage associated with the present approach is that it combines the high-coupling efficiency of oxime bond formation with the convenience associated with the use of photolabile groups. The present strategy thus offers an alternative approach for the immobilization of biomolecules in the microchannels of "labs on a chip" devices.     

Efficient synthesis of an (aminooxy) acetylated‐somatostatin derivative using (aminooxy)acetic acid as a ‘carbonyl capture’ reagent

Owing to the high chemoselectivity between an aminooxy function and a carbonyl group, oxime ligation is one of the most preferred procedures for the preparation of peptide conjugates. However, the sensitivity of (aminooxy)acetylated peptides to ketones and aldehydes makes their synthesis and storage difficult. In our study, we established the efficient synthesis of an (aminooxy)acetylated‐somatostatin derivative in the presence of free (aminooxy)acetic acid, which was used as a ‘carbonyl capture’ reagent in the final cleavage step. This (aminooxy)acetylated compound was further used for the chemoselective ligation (oxime bond formation) with daunorubicin and 4‐fluorobenzaldehyde leading to the formation of conjugates with potential applications in targeted cancer chemotherapy and positron emission tomography. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of 2′-Modified Oligonucleotides Containing Aldehyde or Ethylenediamine Groups

Abstract

Oligonucleotides carrying 2′-aldehyde groups were synthesized and coupled to peptides containing an N-terminal cysteine, aminooxy or hydrazide group to give peptide-oligonucleotide conjugates in good yield. The synthesis of a novel phosphoramidite reagent for the incorporation of 2′-O-(2,3-diaminopropyl)uridine into oligonucleotides was also described. Resultant 2′-diaminooligonucleotides may be useful intermediates in further peptide conjugation studies.     

Functional peptide microarrays for specific and sensitive antibody diagnostics

Peptide microarrays displaying biologically active small synthetic peptides in a high-density format provide an attractive technology to probe complex samples for the presence and/or function of protein analytes. We present a new approach for manufacturing functional peptide microarrays for molecular immune diagnostics. Our method relies on the efficiency of site-specific solution-phase coupling of biotinylated synthetic peptides to NeutrAvidin (NA) and localized microdispensing of peptide-NA-complexes onto activated glass surfaces. Antibodies are captured in a sandwich manner between surface immobilized peptide probes and fluorescence-labeled secondary antibodies. Our work includes a total of 54 peptides derived from immunodominant linear epitopes of the T7 phage capsid protein, Herpes simplex virus glycoprotein D, c-myc protein, and three domains of the Human coronavirus polymerase polyprotein and their cognate mAbs. By using spacer molecules of different type and length for NA-mediated peptide presentation, we show that the incorporation of a minimum spacer length is imperative for antibody binding, whereas the peptide immobilization direction has only secondary importance for antibody affinity and binding. We further demonstrate that the peptide array is capable of detecting low-picomolar concentrations of mAbs in buffered solutions and diluted human serum with high specificity.     

SYNTHESIS OF RGD CONTAINING PEPTIDES. COMPARATIVE STUDY OF THEIR INCORPORATION TO THE SURFACE OF 5-FLUORURIDINE LOADED LIPOSOMES

The synthesis on solid phase of a peptide sequence (GGRGRS) related to an integrin adhesion site as well as the preparation of some hydrophobic derivatives is described.

The incorporation of these peptides to the surface of liposomes was carried out either through the NGPE (N-glutaryl dipalmitoyl phosphatidyl choline) carboxyl-group or mixing hydrophobic peptide derivatives with lipids since the beginning of the process. The influence of these factors on the entrapment yield of 5-FUR (5-fluorouridine) was determined. Best results, calculated as percentage of drug encapsulation, were obtained when the peptide was linked to preformed liposomes via an NGPE-amide bond. On the contrary, the presence of these hydrophobic peptides on the bilayers decreases the overall yield of encapsulation of 5-FUR. Nevertheless, considering drug/lipid relationship and scaling-up requirements it seems that the use of myristoyl peptide derivative should be the procedure of choice.

Physicochemical studies carried out with the peptides indicated that the presence of hydrophobic moieties linked to the parent peptide increases the tendency to self aggregation as detected through fluorescence studies using DPH (1, 6 diphenyl hexatriene) as marker, reducing in this way the efficiency of incorporation of hydrophobic peptides to the surface of liposomes.     

Micropatterning proteins and synthetic peptides on solid supports: a novel application for microelectronics fabrication technology.

In this paper, we describe a method for immobilizing proteins and synthesizing peptides in micrometer-dimension patterns on solid supports. Microelectronics fabrication technology was adapted and used to lithographically direct the location of immobilization of proteins on appropriately derivatized surfaces. As examples, we micropatterned the protein bovine serum albumin (BSA) and the enzyme horseradish peroxidase (HRP). The catalytic activity of HRP was shown to be retained after being cross-linked to the support. When coupled with solid-phase peptide synthesis, the technique allowed synthetic peptides to be constructed in patterns again having micrometer dimensions. Synthetic polypeptides, polylysine, were constructed in patterns with dimensions that approached the practical limit of resolution for optical lithography at 1-2 microns. The patterns of immobilized molecules and synthetic peptides were visualized using histochemical methods together with light and fluorescence microscopy. The protein and peptide patterning technique described here is an advance in the field of bioelectronics. In particular, it should now be possible to devise novel methods for interfacing with biological systems and constructing new devices for incorporation into miniaturized biosensors.     

Site-specific biotinylation. A novel approach and its application to endothelin-1 analogs and PTH-analog.

We have developed an expeditious method for the incorporation of the biotinylaminocaproyl moiety on the epsilon-amino group of a lysine residue within a peptide chain in a site-specific manner. Using t-Boc chemistry for the solid phase synthesis approach and a base labile, acid stable protecting group (Fmoc-) for the epsilon-amino group of the target lysine, we prepared fully protected resin bound peptides which are site-specifically biotinylated. Following HF cleavage, the uniquely biotinylated peptides were obtained in a high degree of purity. Using this approach, a number of biotinylaminocaproyllysyl derivatives of a monocyclic Endothelin-1 analog were prepared. Synthesis of selected bicyclic analogs of high affinity monocycles led to the preparation of the bicyclic [Nle7]ET-1 analog containing epsilon-biotinylaminocaproyllysine at position-9. This peptide, with Kd = 0.08 nM, has 1000-fold higher affinity for the ETA receptor than the commercially available N alpha-biotinylated Endothelin-1. The general utility of this biotinylation methodology was demonstrated by the synthesis of a site-specifically biotinylated PTH analog which contained several side chain functionalized amino acid residues in its sequence. The synthetic method reported here is convergent in that it allows the facile variation of the length of the spacer and also offers the potential to introduce in a site specific manner other groups such as affinity labels and fluorescent tags.     

Anchor-chain molecular system for orientation control in enzyme immobilization

An anchor-chain molecular system was constructed for controlled orientation and high activity in enzyme immobilization. A streptavidin recognition peptide (streptag) coding sequence was fused to the 3' end of the phoA gene, which codes for E. coli alkaline phosphatase (EAP). Both the wild-type (WT) and the Asp-101 --> Ser (D1O1S) mutant were modified with the streptag sequence with or without the insertion of a flexible linker peptide [-(Gly-Ser)(5)-] coding sequence. The fused genes were cloned into the vector pASK75 and expressed in the periplasm of the host cell Escherichia coli SM547. The proteins were released by osmotic shock and purified by ion-exchange chromatography. Enzyme activities of all proteins were measured spectrophotometrically with rho-nitrophenyl phosphate as the substrate. Specific activities of D101S-streptag and D101S-linker-streptag enzymes were increased 25- or 34-fold over the WT, respectively. These fusion proteins were then immobilized on microtiter plates through streptag-streptavidin binding reaction. After immobilization, the D101S-linker-streptag enzyme displayed the highest residual activity and the ratio of enzyme activities of the linker to nonlinker enzymes was 8.4. These results show that the addition of a linker peptide provides a spacer so as to minimize steric hindrance between the enzyme and streptavidin. The method provides a solution for controlled enzyme immobilization with high recover activity, which is especially important in construction of biosensors, biochips, or other biodevices.     

Conjugation of epitope peptides with SH group to branched chain polymeric polypeptides via Cys(Npys)

Since bioconjugates may play an important role as therapeutics in the future, the development of new and effective conjugation strategies is necessary. For the attachment of peptide-like molecules to carriers, there are two main coupling methods involving amide or disulfide bonds. Conjugation through an amide bond can be achieved in several well-defined ways known from peptide chemistry. However, the formation of disulfide bridges between cysteine-containing peptides and carrier molecules still has some problems. In this paper, we describe a novel approach in which the carrier polypeptide is modified by 3-nitro-2-pyridinesulfenyl (Npys)-protected cysteine and this derivative has been applied for conjugation of Cys-containing epitope peptides with poly(L-lysine)-based branched polypeptides. Considering the stability of Npys group in the presence of pentafluorophenol, Boc-Cys(Npys)-OPfp dervivative was selected for introduction to the N-terminal of branches of polypeptides backbone. The branches of the polymers were built up from oligo(DL-alanine) (poly[Lys(DL-Ala(m))], AK) and elongated by an optically active amino acid [poly[Lys(X(i)-DL-Ala(m))], XAK]. We found that the nature of X (Glu, Ser, Thr) has great influence on the incorporation of the protected cysteine residue. Herpes simplex virus and adenovirus epitope peptides were conjugated to Boc-Cys(Npys)-modified polypeptides. Results indicate that the incorporation of epitope peptides depends on the number of Npys group on the polymers as well as on the presence/absence of Boc-protecting group on the Cys residue. This new class of Cys(Npys)-derivatized branched polypeptides is stable for a couple of months and suitable for effective preparation of epitope peptide conjugates possessing increased water solubility.     

Covalent attachment of peptides for high sensitivity solid-phase sequence analysis

We have developed a method for the high efficiency covalent immobilization of picomole to nanomole quantities of peptides in a form compatible with high sensitivity gas-liquid or solid-phase sequence analysis. Glass fiber filter paper was derivatized with amino-phenyltriethoxysilane and peptides were applied to circular disks cut to 1-cm diameters. Peptides were covalently immobilized on the aminophenyl-glass fiber paper through their terminal alpha-carboxyl groups and amino acid side-chain carboxyl groups by activation with the water-soluble reagent N-ethyl-N'-(3-dimethylaminopropyl)carbodiimide. Disks containing the covalently attached peptide were directly inserted into the cartridge of an automated sequenator for sequence analysis by the Edman degradation. Peptides prepared in this way could be routinely sequenced through to and including the C-terminal amino acid residue, at extraordinarily low backgrounds. The covalent immobilization of peptide fragments allowed far more flexibility in sequencing conditions, including the use of polar extraction solvents to increase the yield of phenylthiohydantoin (PTH)-His and PTH-Arg and the use of alternative Edman-type sequencing reagents with enhanced detectability, such as the chromophoric compound 4- (N,N'-dimethylamino)azobenzene-4'-isothiocyanate. The potential of this high efficiency immobilization method for contributing to the development of sequencing chemistries with enhanced sensitivity is discussed.     

Chemoselective oxime and thiazolidine bond formation: a versatile and efficient route to the preparation of 3'-peptide-oligonucleotide conjugates

Oligonucleotides carrying an aldehyde moiety at the 3'-end were synthesized by the oxidation of a 1,2-diol precursor. These were coupled to peptides bearing a cysteine residue for thiazolidine formation and an aminooxy group for oxime formation. The conjugation reaction proved very efficient and selective, thereby allowing the preparation of 3'-peptide-oligonucleotide conjugates in good yield. The conjugation was achieved in aqueous solution without using any protection strategy. Moreover, the present approach neither requires the use of peptide in excess nor changes the hybridization properties of the conjugates.     

Evaluation and optimisation of unnatural amino acid incorporation and bioorthogonal bioconjugation for site-specific fluorescent labelling of proteins expressed in mammalian cells

Many biophysical techniques that are available to study the structure, function and dynamics of cellular constituents require modification of the target molecules. Site-specific labelling of a protein is of particular interest for fluorescence-based single-molecule measurements including single-molecule FRET or super-resolution microscopy. The labelling procedure should be highly specific but minimally invasive to preserve sensitive biomolecules. The modern molecular engineering toolkit provides elegant solutions to achieve the site-specific modification of a protein of interest often necessitating the incorporation of an unnatural amino acid to introduce a unique reactive moiety. The Amber suppression strategy allows the site-specific incorporation of unnatural amino acids into a protein of interest. Recently, this approach has been transferred to the mammalian expression system. Here, we demonstrate how the combination of unnatural amino acid incorporation paired with current bioorthogonal labelling strategies allow the site-specific engineering of fluorescent dyes into proteins produced in the cellular environment of a human cell. We describe in detail which parameters are important to ensure efficient incorporation of unnatural amino acids into a target protein in human expression systems. We furthermore outline purification and bioorthogonal labelling strategies that allow fast protein preparation and labelling of the modified protein. This way, the complete eukaryotic proteome becomes available for single-molecule fluorescence assays.     

Concise site-specific synthesis of DTPA-peptide conjugates: application to imaging probes for the chemokine receptor CXCR4

Diethylenetriaminepentaacetic acid (DTPA) is a useful chelating agent for radionuclides such as (68)Ga, (99m)Tc and (111)In, which are applicable to nuclear medicine imaging. In this study, we established a facile synthetic protocol for the production of mono-DTPA-conjugated peptide probes. A novel monoreactive DTPA precursor reagent was synthesized in two steps using the chemistry of the o-nitrobenzenesulfonyl (Ns) protecting group, and under mild conditions this DTPA precursor was incorporated onto an N(ε)-bromoacetylated Lys of a protected peptide resin. The site-specific DTPA conjugation was facilitated by using a highly acid-labile 4-methyltrityl (Mtt) protecting group for the target site of the bioactive peptide during the solid-phase synthesis. A combination of both techniques yielded peptides with disulfide bonds, such as octreotide and polyphemusin II-derived CXCR4 antagonists. DTPA-peptide conjugates were purified in a single step following cleavage from the resin and disulfide bond formation. This site-specific on-resin construction strategy was used for the design and synthesis of a novel In-DTPA-labeled CXCR4 antagonist, which exhibited highly potent inhibitory activity against SDF-1-CXCR4 binding.     

EcDBS1R6: A novel cationic antimicrobial peptide derived from a signal peptide sequence

BackgroundBacterial infections represent a major worldwide health problem the antimicrobial peptides (AMPs) have been considered as potential alternative agents for treating these infections. Here we demonstrated the antimicrobial activity of EcDBS1R6, a peptide derived from a signal peptide sequence of Escherichia coli that we previously turned into an AMP by making changes through the Joker algorithm.MethodsAntimicrobial activity was measured by broth microdilution method. Membrane integrity was measured using fluorescent probes and through scanning electron microscopy imaging. A sliding window of truncated peptides was used to determine the EcDBS1R6 active core. Molecular dynamics in TFE/water environment was used to assess the EcDBS1R6 structure.ResultsSignal peptides are known to naturally interact with membranes; however, the modifications introduced by Joker transformed this peptide into a membrane-active agent capable of killing bacteria. The C-terminus was unable to fold into an α-helix whereas its fragments showed poor or no antimicrobial activity, suggesting that the EcDBS1R6 antibacterial core was located at the helical N-terminus, corresponding to the signal peptide portion of the parent peptide.ConclusionThe strategy of transforming signal peptides into AMPs appears to be promising and could be used to produce novel antimicrobial agents.General significanceThe process of transforming an inactive signal peptide into an antimicrobial peptide could open a new venue for creating new AMPs derived from signal peptides.     

Fluoride-18 radiolabeling of peptides bearing an aminooxy functional group to a prosthetic ligand via an oxime bond

We have developed a novel F-18 prosthetic ligand named fluoro-PEG-benzaldehyde (FPBA) 1. [(18)F]-FPBA 1 is formed in situ from its radiolabeled precursor [(18)F]6. Compound 6 is efficiently synthesized in four steps starting from commercially available 6-bromo-3-pyridine carbaldehyde 2. [(18)F]-FPBA was evaluated as a prosthetic ligand to radiolabel three cyclic peptides bearing an aminooxy functional group at the N-terminus position. Acetal [(18)F]6 is purified by either solid-phase extraction (SPE) or reverse-phase HPLC with the overall radiochemical yields (RCY) and radiochemical purity (RCP) in very close agreement. The SPE purification process has the advantage of shorter reaction times (71-87 min for entire reaction sequence), while the use of the reverse-phase HPLC purification process allows the use of up to fifty times less of the expensive synthetic peptides (~ 50 nmol) in the oxime coupling reaction. We have demonstrated an efficient methodology in the production of [(18)F]-FPBA 1 and demonstrated its use as a prosthetic ligand for the labeling of peptides possessing an aminooxy functional group.     

Use of carbonyl group addition--elimination reactions for synthesis of nucleic acid conjugates

This review outlines the synthesis of covalent conjugates of oligonucleotides and their analogues that are obtained by reactions of carbonyl compounds with various nucleophiles such as primary amines, N-alkoxyamines, hydrazines, and hydrazides. The products linked by imino, oxime, hydrazone, or thiazolidine groups are shown to be useful intermediates for a wide range of chemical biology applications. Methods for their preparation, isolation, purification, and analysis are highlighted, and the comparative stabilities of the respective linkages are evaluated. The relative merits of incorporation of a carbonyl group, particularly an aldehyde group, into either the oligonucleotide or the ligand parts are considered. Examples of harnessing of aldehyde-nucleophile coupling for the labeling of nucleic acids are given, as well as their conjugation to various biomolecules (e.g. peptides and small molecule ligands), site-specific cross-linking of oligonucleotides to nucleic acid-binding proteins, assembly of multibranched supramolecular structures, and immobilization on functionalized surfaces. Future perspectives of bioconjugation and complex molecular engineering via carbonyl group addition-elimination reactions in nucleic acids chemistry are discussed.     

Developing site-specific immobilization strategies of peptides in a microarray

In peptide-based microarrays, most existing methods do not allow for site-specific immobilization of peptides on the glass surface. We have developed two new approaches for site-specific immobilization of kinase substrates onto glass slides: (1) slides were functionalized with avidin for attachment of biotinylated peptides; and (2) slides were functionalized with thioester for attachment of N-terminally cysteine-containing peptides via a native chemical ligation reaction.     

Total chemical synthesis of a 27 kDa TASP protein derived from the MscL ion channel of M. tuberculosis by ketoxime-forming ligation

A 27-kDa TASP protein, T(5)Msc(103-151), that was derived from the cytoplasmic domain (amino acid residues 103-151) of the MscL ion channel of M. tuberculosis was synthesized by ketoxime-forming chemoselective ligation between a template molecule carrying five pyruvic acid groups, and linear channel peptides carrying one aminooxyacetic acid group. Ketoxime-forming ligation provided for highly efficient assembly of this large totally synthetic protein construct with yields >90% with modest excess (1.5x) of the aminooxy peptide. Formation of the desired TASP molecule was confirmed by SDS-PAGE analysis and MALDI mass spectrometry. The effect of template attachment on the structure of the peptides constituting the TASP was assessed by circular dichroism spectroscopy. Attachment of the peptides to the topological template induces predominantly helical secondary structure, whereas an analogous peptide that did not bear an aminooxy group, MscL(103-151), does not exhibit significant secondary structure at pH 7 and is found to be monomeric in concentrations up to 65 microM. This observation can be explained by entropic destabilization of the unfolded state of T(5)Msc(103-151) due to the attachment to the template and the resulting loss of degrees of freedom. Pyruvic acid-based ketoxime-forming chemoselective ligation may thus prove to be a useful tool for the assembly of large, non-native protein constructs and their biophysical study.