Perfusion seeding of channeled elastomeric scaffolds with myocytes and endothelial cells for cardiac tissue engineering

The requirements for engineering clinically sized cardiac constructs include medium perfusion (to maintain cell viability throughout the construct volume) and the protection of cardiac myocytes from hydrodynamic shear. To reconcile these conflicting requirements, we proposed the use of porous elastomeric scaffolds with an array of channels providing conduits for medium perfusion, and sized to provide efficient transport of oxygen to the cells, by a combination of convective flow and molecular diffusion over short distances between the channels. In this study, we investigate the conditions for perfusion seeding of channeled constructs with myocytes and endothelial cells without the gel carrier we previously used to lock the cells within the scaffold pores. We first established the flow parameters for perfusion seeding of porous elastomer scaffolds using the C2C12 myoblast line, and determined that a linear perfusion velocity of 1.0 mm/s resulted in seeding efficiency of 87% ± 26% within 2 hours. When applied to seeding of channeled scaffolds with neonatal rat cardiac myocytes, these conditions also resulted in high efficiency (77.2% ± 23.7%) of cell seeding. Uniform spatial cell distributions were obtained when scaffolds were stacked on top of one another in perfusion cartridges, effectively closing off the channels during perfusion seeding. Perfusion seeding of single scaffolds resulted in preferential cell attachment at the channel surfaces, and was employed for seeding scaffolds with rat aortic endothelial cells. We thus propose that these techniques can be utilized to engineer thick and compact cardiac constructs with parallel channels lined with endothelial cells. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Uniform tissues engineered by seeding and culturing cells in 3D scaffolds under perfusion at defined oxygen tensions

In this work, we assessed whether culture of uniformly seeded chondrocytes under direct perfusion, which supplies the cells with normoxic oxygen levels, can maintain a uniform distribution of viable cells throughout porous scaffolds several milimeters in thickness, and support the development of uniform tissue grafts. An integrated bioreactor system was first developed to streamline the steps of perfusion cell seeding of porous scaffolds and perfusion culture of the cell-seeded scaffolds. Oxygen tensions in perfused constructs were monitored by in-line oxygen sensors incorporated at the construct inlet and outlet. Adult human articular chondrocytes were perfusion-seeded into 4.5 mm thick foam scaffolds at a rate of 1 mm/s. Cell-seeded foams were then either cultured statically in dishes or further cultured under perfusion at a rate of 100 microm/s for 2 weeks. Following perfusion seeding, viable cells were uniformly distributed throughout the foams. Constructs subsequently cultured statically were highly heterogeneous, with cells and matrix concentrated at the construct periphery. In contrast, constructs cultured under perfusion were highly homogeneous, with uniform distributions of cells and matrix. Oxygen tensions of the perfused medium were maintained near normoxic levels (inlet congruent with 20%, outlet > 15%) at all times of culture. We have demonstrated that perfusion culture of cells seeded uniformly within porous scaffolds, at a flow rate maintaining a homogeneous oxygen supply, supports the development of uniform engineering tissue grafts of clinically relevant thicknesses.     

A novel composite scaffold for cardiac tissue engineering

Summary One approach to the engineering of functional cardiac tissue for basic studies and potential clinical use involves bioreactor cultivation of dissociated cells on a biomaterial scaffold. Our objective was to develop a scaffold that is (1) highly porous with large intereconnected pores (to facilitate mass transport), (2) hydrophilic (to enhance cell attachment), (3) structurally stable (to withstand the shearing forces during bioreactor cultivation), (4) degradable (to provide ultimate biocompatibility of the tissue graft), and (5) elastic (to enable transmission of contractile forces). The scaffold of choice was made as a composite of poly(Dl-lactide-co-caprolactone), poly(Dl-lactide-co-glycolide) (PLGA), and type I collagen, with open interconnected pores and the average void volume of 80±5%. Neonatal rat heart cells suspended in Matrigel were seeded into the scaffold at a physiologically high density (1.35×10⁸ cells/cm³) and cultivated for 8 d in cartridges perfused with culture medium or in orbitally mixed dishes (25 rpm); collagen sponge (Ultrafoam^⋆m) and PLGA sponge served as controls. Construct cellularity, presence of cardiac markers, and contractile properties were markedly improved in composite scaffolds as compared with both controls.     

Medium perfusion enables engineering of compact and contractile cardiac tissue

We hypothesized that functional constructs with physiological cell densities can be engineered in vitro by mimicking convective-diffusive oxygen transport normally present in vivo. To test this hypothesis, we designed an in vitro culture system that maintains efficient oxygen supply to the cells at all times during cell seeding and construct cultivation and characterized in detail construct metabolism, structure, and function. Neonatal rat cardiomyocytes suspended in Matrigel were cultured on collagen sponges at a high initial density (1.35 x 10(8) cells/cm(3)) for 7 days with interstitial flow of medium; constructs cultured in orbitally mixed dishes, neonatal rat ventricles, and freshly isolated cardiomyocytes served as controls. Constructs were assessed at timed intervals with respect to cell number, distribution, viability, metabolic activity, cell cycle, presence of contractile proteins (sarcomeric alpha-actin, troponin I, and tropomyosin), and contractile function in response to electrical stimulation [excitation threshold (ET), maximum capture rate (MCR), response to a gap junctional blocker]. Interstitial flow of culture medium through the central 5-mm-diameter x 1.5-mm-thick region resulted in a physiological density of viable and differentiated, aerobically metabolizing cells, whereas dish culture resulted in constructs with only a 100- to 200-microm-thick surface layer containing viable and differentiated but anaerobically metabolizing cells around an acellular interior. Perfusion resulted in significantly higher numbers of live cells, higher cell viability, and significantly more cells in the S phase compared with dish-grown constructs. In response to electrical stimulation, perfused constructs contracted synchronously, had lower ETs, and recovered their baseline function levels of ET and MCR after treatment with a gap junctional blocker; dish-grown constructs exhibited arrhythmic contractile patterns and failed to recover their baseline MCR levels.     

Oscillating perfusion of cell suspensions through three-dimensional scaffolds enhances cell seeding efficiency and uniformity

We developed a bioreactor for automated cell seeding of three-dimensional scaffolds by continuous perfusion of a cell suspension through the scaffold pores in oscillating directions. Using quantitative biochemical and image analysis techniques, we then evaluated the efficiency and uniformity of perfusion seeding of Polyactive foams as compared to conventional static and spinner flask methods. Finally, we assessed the efficacy of the perfusion seeding technique for different scaffolds and cell types. Perfusion seeding of chondrocytes into Polyactive foams resulted in "viable cell seeding efficiencies," defined as the percentages of initially loaded cells that were seeded and remained viable, that were significantly higher (75 +/- 6%) than those by static (57% +/- 5%) and spinner flask seeding (55% +/- 8%). In addition, as compared to static and spinner flask methods, cells seeded by perfusion were respectively 2.6-fold and 3.8-fold more uniformly distributed and formed more homogeneously sized cell clusters. Chondrocytes seeded by perfusion into Hyaff-11 nonwoven meshes were 26% and 63%, respectively, more uniformly distributed than following static and spinner flask seeding. Bone marrow stromal cells seeded by perfusion into ChronOS porous ceramics were homogeneously distributed throughout the scaffold volume, while following the static method, cells were found only near the top surface of the ceramic. In summary, we demonstrated that our cell seeding perfusion bioreactor generated constructs with remarkably uniform cell distributions at high efficiencies, and was effective for a variety of scaffolds and different mesenchymal cell types.     

Three-dimensional cell seeding and growth in radial-flow perfusion bioreactor for in vitro tissue reconstruction

Radial-flow perfusion bioreactor systems have been designed and evaluated to enable direct cell seeding into a three-dimensional (3-D) porous scaffold and subsequent cell culture for in vitro tissue reconstruction. However, one of the limitations of in vitro regeneration is the tissue necrosis that occurs at the central part of the 3-D scaffold. In the present study, tubular poly-L-lactic acid (PLLA) porous scaffolds with an optimized pore size and porosity were prepared by the lyophilization method, and the effect of different perfusion conditions on cell seeding and growth were compared with those of the conventional static culture. The medium flowed radially from the lumen toward the periphery of the tubular scaffolds. It was found that cell seeding under a radial-flow perfusion condition of 1.1 mL/cm2 x min was effective, and that the optimal flow rate for cell growth was 4.0 mL/cm2 x min. At this optimal rate, the increase in seeded cells in the perfusion culture over a period of 5 days was 7.3-fold greater than that by static culture over the same period. The perfusion cell seeding resulted in a uniform distribution of cells throughout the scaffold. Subsequently, the perfusion of medium and hence the provision of nutrients and oxygen permitted growth and maintenance of the tissue throughout the scaffold. The perfusion seeding/culture system was a much more effective strategy than the conventional system in which cells are seeded under a static condition and cultured in a bioreactor such as a spinner flask.     

Effects of filtration seeding on cell density, spatial distribution, and proliferation in nonwoven fibrous matrices

The cell seeding density and spatial distribution in a 3-D scaffold are critical to the morphogenetic development of an engineered tissue. A dynamic depth-filtration seeding method was developed to improve the initial cell seeding density and spatial distribution in 3-D nonwoven fibrous matrices commonly used as tissue scaffolds. In this work, trophoblast-like ED27 cells were seeded in poly(ethylene terephthalate) (PET) matrices with various porosities (0.85-0.93). The effects of the initial concentration of cells in the suspension used to seed the PET matrix and the pore size of the matrix on the resulting seeding density and subsequent cell proliferation and tissue development were studied. Compared to the conventional static seeding method, the dynamic depth-filtration seeding method gave a significantly higher initial seeding density (2-4 x 10(7) vs 4 x 10(6) cells/cm3), more uniform cell distribution, and a higher final cell density in the tissue scaffold. The more uniform initial cell spatial distribution from the filtration seeding method also led to more cells in S phase and a prolonged proliferation period. However, both uniform spatial cell distribution and the pore size of the matrices are important to cell proliferation and morphological development in the seeded tissue scaffold. Large-pore matrices led to the formation of cell aggregates and thus might reduce cell proliferation. The dynamic depth-filtration seeding method is better in providing a higher initial seeding density and more uniform cell distribution and is easier to apply to large tissue scaffolds. A depth-filtration model was also developed and can be used to simulate the seeding process and to predict the maximum initial seeding densities in matrices with different porosities.     

Composition of cell-polymer cartilage implants

Cartilage implants for potential in vivo use for joint repair or reconstructive surgery can be created in vitro by growing chondrocytes on biodegradable polymer scaffolds. Implants 1 cm in diameter by 0.176 cm thick were made using isolated calf chondrocytes and polyglucolic acid (PGA). By 6 weeks, the total amount of glycosaminoglycan (GAG) and collagen (types I and II) increased to 46% of the implant dry weight; there was a corresponding decrease in the mass of PGA. Implant biochemical and histological compositions depended on initial cell density, scaffold thickness, and the methods of cell seeding and implant culture. Implants seeded at higher initial cell densities reached higher GAG contents (total and per cell), presumably due to cooperative cell-to-cell interactions. Thicker implants had lower GAG and collagen contents due to diffusional limitations.Implants that were seeded and cultured under mixed conditions grew to be thicker and more spatially uniform with respect to the distribution of cells, matrix, and remaining polymer than those seeded and/or cultured statically. Implants from mixed cultures had a 20-40-mum thick superficial zone of flat cells and collagen oriented parallel to the surface and a deep zone with perpendicular columns of cells surrounded by GAG Mixing during cell seeding and culture resulted in a more even cell distribution ad enhanced nutrient diffusion which could be related to a more favorable biomechanical environment for chondrogenesis. Cartilage with appropriate for and function for in vivo implantation ca thus be created by selectively stimulating the growth and differentiated function of chondrocytes (i.e., GAG and collagen synthesis) through optimization of the in vitro culture environment. (c) 1994 John Wiley & Sons, Inc.     

接种方式对细胞在三维材料中接种率和分布的影响

考察了静态和动态接种方式对成纤维细胞在胶原壳聚糖支架材料中接种率和分布的影响。将人成纤维细胞制成细胞悬液,分别采用静态接种、转瓶接种和灌注接种方式将细胞接入三维胶原壳聚糖海绵。通过MTT法和切片HE染色分别考察细胞接种率及细胞在三维材料中的分布。实验结果表明：在低的接种密度下静态接种有较高的接种率(889%),但随着接种密度的增加接种率下降显著,细胞结团且分布不均匀;转瓶接种的接种率约为60%,细胞分布也不均匀;灌注接种的接种率始终维持在77%以上,能得到高的起始细胞密度,且细胞分布均匀,是一种理想的接种方式。细胞接种方式的优化为改善工程化组织的结构和功能、缩短体外构建时间奠定了基础。     

The dynamics of surface acoustic wave‐driven scaffold cell seeding

Flow visualization using fluorescent microparticles and cell viability investigations are carried out to examine the mechanisms by which cells are seeded into scaffolds driven by surface acoustic waves. The former consists of observing both the external flow prior to the entry of the suspension into the scaffold and the internal flow within the scaffold pores. The latter involves micro‐CT (computed tomography) scans of the particle distributions within the seeded scaffolds and visual and quantitative methods to examine the morphology and proliferation ability of the irradiated cells. The results of these investigations elucidate the mechanisms by which particles are seeded, and hence provide valuable information that form the basis for optimizing this recently discovered method for rapid, efficient, and uniform scaffold cell seeding. Yeast cells are observed to maintain their size and morphology as well as their proliferation ability over 14 days after they are irradiated. The mammalian primary osteoblast cells tested also show little difference in their viability when exposed to the surface acoustic wave irradiation compared to a control set. Together, these provide initial feasibility results that demonstrate the surface acoustic wave technology as a viable seeding method without risk of denaturing the cells. Biotechnol. Bioeng. 2009;103: 387–401. © 2009 Wiley Periodicals, Inc.     

Cardiac tissue engineering: cell seeding, cultivation parameters, and tissue construct characterization.

Cardiac tissue engineering has been motivated by the need to create functional tissue equivalents for scientific studies and cardiac tissue repair. We previously demonstrated that contractile cardiac cell-polymer constructs can be cultivated using isolated cells, 3-dimensional scaffolds, and bioreactors. In the present work, we examined the effects of (1) cell source (neonatal rat or embryonic chick), (2) initial cell seeding density, (3) cell seeding vessel, and (4) tissue culture vessel on the structure and composition of engineered cardiac muscle. Constructs seeded under well-mixed conditions with rat heart cells at a high initial density ((6-8) x 10(6) cells/polymer scaffold) maintained structural integrity and contained macroscopic contractile areas (approximately 20 mm(2)). Seeding in rotating vessels (laminar flow) rather than mixed flasks (turbulent flow) resulted in 23% higher seeding efficiency and 20% less cell damage as assessed by medium lactate dehydrogenase levels (p < 0.05). Advantages of culturing constructs under mixed rather than static conditions included the maintenance of metabolic parameters in physiological ranges, 2-4 times higher construct cellularity (p &le 0.0001), more aerobic cell metabolism, and a more physiological, elongated cell shape. Cultivations in rotating bioreactors, in which flow patterns are laminar and dynamic, yielded constructs with a more active, aerobic metabolism as compared to constructs cultured in mixed or static flasks. After 1-2 weeks of cultivation, tissue constructs expressed cardiac specific proteins and ultrastructural features and had approximately 2-6 times lower cellularity (p < 0.05) but similar metabolic activity per unit cell when compared to native cardiac tissue.     

Epithelial Cell Repopulation and Preparation of Rodent Extracellular Matrix Scaffolds for Renal Tissue Development

This protocol details the generation of acellular, yet biofunctional, renal extracellular matrix (ECM) scaffolds that are useful as small-scale model substrates for organ-scale tissue development. Sprague Dawley rat kidneys are cannulated by inserting a catheter into the renal artery and perfused with a series of low-concentration detergents (Triton X-100 and sodium dodecyl sulfate (SDS)) over 26 hr to derive intact, whole-kidney scaffolds with intact perfusable vasculature, glomeruli, and renal tubules. Following decellularization, the renal scaffold is placed inside a custom-designed perfusion bioreactor vessel, and the catheterized renal artery is connected to a perfusion circuit consisting of: a peristaltic pump; tubing; and optional probes for pH, dissolved oxygen, and pressure. After sterilizing the scaffold with peracetic acid and ethanol, and balancing the pH (7.4), the kidney scaffold is prepared for seeding via perfusion of culture medium within a large-capacity incubator maintained at 37 °C and 5% CO₂. Forty million renal cortical tubular epithelial (RCTE) cells are injected through the renal artery, and rapidly perfused through the scaffold under high flow (25 ml/min) and pressure (~230 mmHg) for 15 min before reducing the flow to a physiological rate (4 ml/min). RCTE cells primarily populate the tubular ECM niche within the renal cortex, proliferate, and form tubular epithelial structures over seven days of perfusion culture. A 44 µM resazurin solution in culture medium is perfused through the kidney for 1 hr during medium exchanges to provide a fluorometric, redox-based metabolic assessment of cell viability and proliferation during tubulogenesis. The kidney perfusion bioreactor permits non-invasive sampling of medium for biochemical assessment, and multiple inlet ports allow alternative retrograde seeding through the renal vein or ureter. These protocols can be used to recellularize kidney scaffolds with a variety of cell types, including vascular endothelial, tubular epithelial, and stromal fibroblasts, for rapid evaluation within this system.     

Effects of oxygen on engineered cardiac muscle

Concentration gradients associated with the in vitro cultivation of engineered tissues that are vascularized in vivo result in the formation of only a thin peripheral tissue-like region (e.g., approximately 100 microm for engineered cardiac muscle) around a relatively cell-free interior. We previously demonstrated that diffusional gradients within engineered cardiac constructs can be minimized by direct perfusion of culture medium through the construct. In the present study, we measured the effects of medium perfusion rate and local oxygen concentration (p(O2)) on the in vitro reconstruction of engineered cardiac muscle. Neonatal rat cardiomyocytes were seeded onto biodegradable polymer scaffolds (fibrous discs, 1.1 cm diameter x 2 mm thick, made of polyglycolic acid, 24 x 10(6) cells per scaffold). The resulting cell-polymer constructs were cultured for a total of 12 days in serially connected cartridges (n = 1-8), each containing one construct directly perfused with culture medium at a flow rate of 0.2-3.0 mL/min. In all groups, oxygen concentration decreased due to cell respiration, and depended on construct position in the series and medium flow rate. Higher perfusion rates and higher p(O2) correlated with more aerobic cell metabolism, and higher DNA and protein contents. Constructs cultured at p(O2) of 160 mm Hg had 50% higher DNA and protein contents, markedly higher expression of sarcomeric alpha-actin, better organized sarcomeres and cell junctions, and 4.5-fold higher rate of cell respiration as compared to constructs cultured at p(O2) of 60 mm Hg. Contraction rates of the corresponding cardiac cell monolayers were 40% higher at p(O2) of 160 than 60 mm Hg. The control of oxygen concentration in cell microenvironment can thus improve the structure and function of engineered cardiac muscle. Experiments of this kind can form a basis for controlled studies of the effects of oxygen on the in vitro development of engineered tissues.     

Optimization of cardiac cell seeding and distribution in 3D porous alginate scaffolds

Cardiac tissue engineering has evolved as a potential therapeutic approach to assist in cardiac regeneration. We have recently shown that tissue-engineered cardiac graft, constructed from cardiomyocytes seeded within an alginate scaffold, is capable of preventing the deterioration in cardiac function after myocardial infarction in rats. The present article addresses cell seeding within porous alginate scaffolds in an attempt to achieve 3D high-density cardiac constructs with a uniform cell distribution. Due to the hydrophilic nature of the alginate scaffold, its >90% porosity and interconnected pore structure, cell seeding onto the scaffold was efficient and short, up to 30 min. Application of a moderate centrifugal force during cell seeding resulted in a uniform cell distribution throughout the alginate scaffolds, consequently enabling the loading of a large number of cells onto the 3D scaffolds. The percent cell yield in the alginate scaffolds ranged between 60-90%, depending on cell density at seeding; it was 90% at seeding densities of up to 1 x 10(8) cells/cm(3) scaffold and decreased to 60% at higher densities. The highly dense cardiac constructs maintained high metabolic activity in culture. Scanning electron microscopy revealed that the cells aggregated within the scaffold pores. Some of the aggregates were contracting spontaneously within the matrix pores. Throughout the culture there was no indication of cardiomyocyte proliferation within the scaffolds, nor was it found in 3D cultures of cardiofibroblasts. This may enable the development of cardiac cocultures, without domination of cardiofibroblasts with time.     

Enhancing cell seeding of scaffolds in tissue engineering through manipulation of hydrodynamic parameters

The seeding of cells onto biocompatible scaffolds is a determinant step in the attainment of functional properties of engineered tissues. Efficient, fast and spatially uniform cell seeding can improve the clinical potential of engineered tissue templates. One way to approach these cell seeding requirements is through bioreactor design. In the present study, bovine chondrocytes were seeded (2.5, 5.0 or 10.0 million cells per scaffold) onto polyglycolic acid scaffolds within the hydrodynamic environments of wavy-walled and spinner flask bioreactors. Previous characterizations of the hydrodynamic environment in the vicinity of constructs cultivated in these bioreactors suggested decreased flow-induced shear stress as well as increased recirculation and magnitude of the axial fluid velocities in the wavy-walled bioreactor. Here we report more efficient and spatially uniform cell seeding in the wavy-walled bioreactor, and at intermediate initial cell densities (5 million cells per scaffold). This study constitutes an important step towards the achievement of functional tissue-engineered implants by (i) increasing our understanding of the influence of hydrodynamic parameters on the efficiency and spatial distribution of cell attachment to scaffolds and the production of extracellular matrix and (ii) introducing a comprehensive approach to the investigation of the effects of bioprocessing conditions on tissue morphology and composition.     

3-D computational modeling of media flow through scaffolds in a perfusion bioreactor

Media perfusion bioreactor systems have been developed to improve mass transport throughout three-dimensional (3-D) tissue-engineered constructs cultured in vitro. In addition to enhancing the exchange of nutrients and wastes, these systems simultaneously deliver flow-mediated shear stresses to cells seeded within the constructs. Local shear stresses are a function of media flow rate and dynamic viscosity, bioreactor configuration, and porous scaffold microarchitecture. We have used the Lattice-Boltzmann method to simulate the flow conditions within perfused cell-seeded cylindrical scaffolds. Microcomputed tomography imaging was used to define the scaffold microarchitecture for the simulations, which produce a 3-D fluid velocity field throughout the scaffold porosity. Shear stresses were estimated at various media flow rates by multiplying the symmetric part of the gradient of the velocity field by the dynamic viscosity of the cell culture media. The shear stress algorithm was validated by modeling flow between infinite parallel plates and comparing the calculated shear stress distribution to the analytical solution. Relating the simulation results to perfusion experiments, an average surface shear stress of 5x10(-5)Pa was found to correspond to increased cell proliferation, while higher shear stresses were associated with upregulation of bone marker genes. This modeling approach can be used to compare results obtained for different perfusion bioreactor systems or different scaffold microarchitectures and may allow specific shear stresses to be determined that optimize the amount, type, or distribution of in vitro tissue growth.     

Mathematical Model of Growth Factor Driven Haptotaxis and Proliferation in a Tissue Engineering Scaffold

Motivated by experimental work (Miller et al. in Biomaterials 27(10):2213–2221, 2006, 32(11):2775–2785, 2011) we investigate the effect of growth factor driven haptotaxis and proliferation in a perfusion tissue engineering bioreactor, in which nutrient-rich culture medium is perfused through a 2D porous scaffold impregnated with growth factor and seeded with cells. We model these processes on the timescale of cell proliferation, which typically is of the order of days. While a quantitative representation of these phenomena requires more experimental data than is yet available, qualitative agreement with preliminary experimental studies (Miller et al. in Biomaterials 27(10):2213–2221, 2006) is obtained, and appears promising. The ultimate goal of such modeling is to ascertain initial conditions (growth factor distribution, initial cell seeding, etc.) that will lead to a final desired outcome.     

A novel rotating-shaft bioreactor for two-phase cultivation of tissue-engineered cartilage

A novel rotating-shaft bioreactor (RSB) was developed for two-phase cultivation of tissue-engineered cartilage. The reactor consisted of a rotating shaft on which the chondrocyte/scaffold constructs (7.5 mm diameter x 3.5 mm thickness) were fixed and a reactor vessel half-filled with medium. The horizontal rotation of the shaft resulted in alternating exposure of the constructs to gas and liquid phases, thus leading to efficient oxygen and nutrient transfer, as well as periodically changing, mild shear stress exerting on the construct surfaces (0-0.32 dyn/cm2 at 10 rpm), as revealed by computer simulation. Strategic operation of the RSB (maintaining rotating speed at 10 rpm for 3 weeks and lowering the speed to 2 rpm in week 4) in combination with higher seeding density (6 x 10(6) chondrocytes/scaffold) and medium perfusion resulted in uniform cell distribution and increased glycosaminoglycan (3.1 mg/scaffold) and collagen (7.0 mg/scaffold) deposition. The 4-week constructs resembled native cartilages in terms of not only gross appearance and cell morphology but also distributions of glycosaminoglycan, total collagen, and type II collagen, confirming the maintenance of chondrocyte phenotype and formation of cartilage-like constructs in the RSB cultures. In summary, the novel RSB may be implicated for in vitro study of chondrogenesis and de novo cartilage development under periodic mechanical loading. With proper optimization of the culture conditions, a RSB may be employed for the production of cartilage-like constructs.     

Cardiac tissue engineering using perfusion bioreactor systems

This protocol describes tissue engineering of synchronously contractile cardiac constructs by culturing cardiac cell populations on porous scaffolds (in some cases with an array of channels) and bioreactors with perfusion of culture medium (in some cases supplemented with an oxygen carrier). The overall approach is 'biomimetic' in nature as it tends to provide in vivo-like oxygen supply to cultured cells and thereby overcome inherent limitations of diffusional transport in conventional culture systems. In order to mimic the capillary network, cells are cultured on channeled elastomer scaffolds that are perfused with culture medium that can contain oxygen carriers. The overall protocol takes 2-4 weeks, including assembly of the perfusion systems, preparation of scaffolds, cell seeding and cultivation, and on-line and end-point assessment methods. This model is well suited for a wide range of cardiac tissue engineering applications, including the use of human stem cells, and high-fidelity models for biological research.     

The effect of media perfusion on three-dimensional cultures of human chondrocytes: integration of experimental and computational approaches

This work examines the effect of perfusion on human mature articular chondrocytes cultured on synthetic biodegradable scaffolds (DegraPol). Human chondrocytes were isolated, seeded on the scaffolds and subjected to perfused culture at a flow rate of 0.5 ml/min, corresponding to an average inlet fluid velocity of 44 microm/s, with flow inversion every 1 minute. The flow was imposed at the construct surface in some constructs, it was forced through the construct thickness in other constructs and was absent in the static controls. We compared cell viability and morphology and we evaluated material properties of the constructs at 1 month of culture. Thickness-perfused constructs showed significantly higher material properties and roughly a two-fold cell viability, when compared both to surface-perfused constructs and to static controls. Chondrocytes maintained a phenotypic morphology in all experiments, probably favoured by a limited cell-scaffold interaction. Biosynthetic activity could be demonstrated only in the bioreactor-cultured constructs. In this experimental model, a bi-directional flow of culture medium was applied to the cells at a macroscopic level and computational modelling was used to quantify the fluid-dynamic environment induced on the cells at a microscopic level. This method may be used to quantify the effects of fluid-dynamic shear on the growth modulation of tissue-engineered cartilage constructs, to potentially enhance tissue growth in vitro.