High Resolution Characterization of Myosin IIC Protein Tailpiece and Its Effect on Filament Assembly

The motor protein nonmuscle myosin II (NMII) must undergo dynamic oligomerization into filaments to perform its cellular functions. A small nonhelical region at the tail of the long coiled-coil region (tailpiece) is a common feature of all dynamically assembling myosin II proteins. This tailpiece is a key regulatory domain affecting NMII filament assembly properties and is subject to phosphorylation in vivo. We previously demonstrated that the positively charged region of the tailpiece binds to assembly-incompetent NMII-C fragments, inducing filament assembly. In the current study, we investigated the molecular mechanisms by which the tailpiece regulates NMII-C self-assembly. Using alanine scan, we found that specific positive and aromatic residues within the positively charged region of the tailpiece are important for inducing NMII-C filament assembly and for filament elongation. Combining peptide arrays with deletion studies allowed us to identify the tailpiece binding sites in the coiled-coil rod. Elucidation of the mechanism by which the tailpiece induces filament assembly permitted us further investigation into the role of tailpiece phosphorylation. Sedimentation and CD spectroscopy identified that phosphorylation of Thr¹⁹⁵⁷ or Thr¹⁹⁶⁰ inhibited the ability of the tailpiece to bind the coiled-coil rod and to induce NMII-C filament formation. This study provides molecular insight into the role of specific residues within the NMII-C tailpiece that are responsible for shifting the oligomeric equilibrium of NMII-C toward filament assembly and determining its morphology.     

Myosin II Tailpiece Determines Its Paracrystal Structure, Filament Assembly Properties, and Cellular Localization

Non muscle myosin II (NMII) is a major motor protein present in all cell types. The three known vertebrate NMII isoforms share high sequence homology but play different cellular roles. The main difference in sequence resides in the C-terminal non-helical tailpiece (tailpiece). In this study we demonstrate that the tailpiece is crucial for proper filament size, overcoming the intrinsic properties of the coiled-coil rod. Furthermore, we show that the tailpiece by itself determines the NMII filament structure in an isoform-specific manner, thus providing a possible mechanism by which each NMII isoform carries out its unique cellular functions. We further show that the tailpiece determines the cellular localization of NMII-A and NMII-B and is important for NMII-C role in focal adhesion complexes. We mapped NMII-C sites phosphorylated by protein kinase C and casein kinase II and showed that these phosphorylations affect its solubility properties and cellular localization. Thus phosphorylation fine-tunes the tailpiece effects on the coiled-coil rod, enabling dynamic regulation of NMII-C assembly. We thus show that the small tailpiece of NMII is a distinct domain playing a role in isoform-specific filament assembly and cellular functions.Non muscle myosin II (NMII)² is a major motor protein present in all cell types participating in crucial processes, including cytokinesis, surface attachment, and cell movement (1–3). NMII units are hexamers of two long heavy chains with two pairs of light chains attached. NMII heavy chain is composed of a globular head containing the actin binding and force generating ATPase domains, followed by a large coiled-coil rod that terminates with a short non-helical tailpiece (tailpiece). To carry out its cellular functions, NMII assembles into dimers and higher order filaments by interactions of the coiled-coil rod (4). The assembly process is governed by electrostatic interactions between adjacent coiled-coil rods containing alternating charged regions with specific periodicity (5–9) and is enhanced by activation of the motor domain through regulatory light chain phosphorylation (10–12). The charge periodicity also determines the register and orientation of each NMII hexamer in the filament. Additionally the C-terminal region of the coiled-coil rod contains a distinctive positively charged region and the assembly-competence domains that are crucial for proper filament assembly (5–9, 13).Three isoforms of NMII (termed NMII-A, NMII-B, and NMII-C) have been identified in mammals (14–16). Although NMII isoforms share somewhat overlapping roles, each isoform has distinctive tissue distribution and specific functions. NMII-A is important for neural growth cone retraction (17, 18) and is distributed to the front of migrating endothelial cells (19). While NMII-B participates in growth cone advancement (20) and was detected in the retracting tails of migrating endothelial cells (19). Furthermore NMII-A and NMII-B have an opposing effect on motility, since depletion of NMII-A leads to increased motility while NMII-B depletion hinders motility (21, 22). NMII-C plays a role in cytokinesis (23) and has distinct distribution in neuronal cells (24). Furthermore one NMII isoform only partly rescue cells in which siRNA was used to reduce the expression of another isoform (23, 25). This functional diversity is achieved despite a significant amino acid sequence identity between the isoforms (overall 64–80%), and the origin of these differential distributions and functions is not completely understood.Recent studies suggest that the C-terminal portion of NMII-A and NMII-B, particularly the last ∼170 amino acids, is responsible for the differential distribution of these NMII isoforms (26, 27). It was shown that swapping this region between NMII-A and NMII-B resulted in chimeric proteins, which adopted cellular localization according to the C-terminal part (26). This C-terminal ∼170 amino acid coiled-coil region contains the assembly-competence domains and other regions that are critical for filament assembly (5–9, 13) as well as the non-helical tailpiece. As the small tailpiece is also an important regulator of NMII filament assembly (27, 28) capable of changing NMII filament assembly properties; and phosphorylation of NMII tailpiece was shown to interfere with filament assembly (29–33) the tailpiece may be important for allowing NMII to perform its dynamic tasks. Because the coiled-coil regions are highly conserved between NMII isoforms, while the tailpiece is the most divergent, it is therefore a good candidate for mediating NMII isoform-specific functions. However, the exact mechanism by which the tailpiece affects NMII function is not fully understood. Here we show that the tailpiece serves as an isoform-specific control mechanism modulating filament order, assembly, and cellular function.     

Orchestrating nonmuscle myosin II filament assembly at the onset of cytokinesis

Contractile forces in the actomyosin cortex are required for cellular morphogenesis. This includes the invagination of the cell membrane during division, where filaments of nonmuscle myosin II (NMII) are responsible for generating contractile forces in the cortex. However, how NMII heterohexamers form filaments in vivo is not well understood. To quantify NMII filament assembly dynamics, we imaged the cortex of Caenorhabditis elegans embryos at high spatial resolution around the time of the first division. We show that during the assembly of the cytokinetic ring, the number of NMII filaments in the cortex increases and more NMII motors are assembled into each filament. These dynamics are influenced by two proteins in the RhoA GTPase pathway, the RhoA-dependent kinase LET-502 and the myosin phosphatase MEL-11. We find that these two proteins differentially regulate NMII activity at the anterior and at the division site. We show that the coordinated action of these regulators generates a gradient of free NMII in the cytoplasm driving a net diffusive flux of NMII motors toward the cytokinetic ring. Our work highlights how NMII filament assembly and disassembly dynamics are orchestrated over space and time to facilitate the up-regulation of cortical contractility during cytokinesis.     

The tip of the coiled-coil rod determines the filament formation of smooth muscle and nonmuscle myosin

Myosin II self-assembles to form thick filaments that are attributed to its long coiled-coil tail domain. The present study has determined a region critical for filament formation of vertebrate smooth muscle and nonmuscle myosin II. A monoclonal antibody recognizing the 28 residues from the C-terminal end of the coiled-coil domain of smooth muscle myosin II completely inhibited filament formation, whereas other antibodies recognizing other parts of the coiled-coil did not. To determine the importance of this region in the filament assembly in vivo, green fluorescent protein (GFP)-tagged smooth muscle myosin was expressed in COS-7 cells, and the filamentous localization of the GFP signal was monitored by fluorescence microscopy. Wild type GFP-tagged smooth muscle myosin colocalized with F-actin during interphase and was also recruited into the contractile ring during cytokinesis. Myosin with the nonhelical tail piece deleted showed similar behavior, whereas deletion of the 28 residues at the C-terminal end of the coiled-coil domain abolished this localization. Deletion of the corresponding region of GFP-tagged nonmuscle myosin IIA also abolished this localization. We conclude that the C-terminal end of the coiled-coil domain, but not the nonhelical tail piece, of myosin II is critical for myosin filament formation both in vitro and in vivo.     

Multiple regulatory steps control mammalian nonmuscle myosin II assembly in live cells

To better understand the mechanism controlling nonmuscle myosin II (NM-II) assembly in mammalian cells, mutant NM-IIA constructs were created to allow tests in live cells of two widely studied models for filament assembly control. A GFP-NM-IIA construct lacking the RLC binding domain (ΔIQ2) destabilizes the 10S sequestered monomer state and results in a severe defect in recycling monomers during spreading, and from the posterior to the leading edge during polarized migration. A GFP-NM-IIA construct lacking the nonhelical tailpiece (Δtailpiece) is competent for leading edge assembly, but overassembles, suggesting defects in disassembly from lamellae subsequent to initial recruitment. The Δtailpiece phenotype was recapitulated by a GFP-NM-IIA construct carrying a mutation in a mapped tailpiece phosphorylation site (S1943A), validating the importance of the tailpiece and tailpiece phosphorylation in normal lamellar myosin II assembly control. These results demonstrate that both the 6S/10S conformational change and the tailpiece contribute to the localization and assembly of myosin II in mammalian cells. This work furthermore offers cellular insights that help explain platelet and leukocyte defects associated with R1933-stop alleles of patients afflicted with human MYH9-related disorder.     

Critical regions for assembly of vertebrate nonmuscle myosin II

Myosin II molecules assemble and form filaments through their C-terminal rod region, and the dynamic filament assembly-disassembly process of nonmuscle myosin II molecules is important for cellular activities. To estimate the critical region for filament formation of vertebrate nonmuscle myosin II, we assessed the solubility of a series of truncated recombinant rod fragments of nonmuscle myosin IIB at various concentrations of NaCl. A C-terminal 248-residue rod fragment (Asp 1729-Glu 1976) was shown by its solubility behavior to retain native assembly features, and two regions within it were found to be necessary for assembly: 35 amino acid residues from Asp 1729 to Thr 1763 and 39 amino acid residues from Ala 1875 to Ala 1913, the latter containing a sequence similar to the assembly competence domain (ACD) of skeletal muscle myosin. Fragments lacking either of the two regions were soluble at any NaCl concentration. We referred to these two regions as nonmuscle myosin ACD1 (nACD1) and nACD2, respectively. In addition, we constructed an alpha-helical coiled-coil model of the rod fragment, and found that a remarkable negative charge cluster (termed N1) and a positive charge cluster (termed P2) were present within nACD1 and nACD2, respectively, besides another positive charge cluster (termed P1) in the amino-terminal vicinity of nACD2. From these results, we propose two major electrostatic interactions that are essential for filament formation of nonmuscle myosin II: the antiparallel interaction between P2 and N1 which is essential for the nucleation step and the parallel interaction between P1 and N1 which is important for the elongation step.     

Role of the COOH-terminal nonhelical tailpiece in the assembly of a vertebrate nonmuscle myosin rod

A short nonhelical sequence at the COOH-terminus of vertebrate nonmuscle myosin has been shown to enhance myosin filament assembly. We have analyzed the role of this sequence in chicken intestinal epithelial brush border myosin, using protein engineering/site-directed mutagenesis. Clones encoding the rod region of this myosin were isolated and sequenced. They were truncated at various restriction sites and expressed in Escherichia coli, yielding a series of mutant myosin rods with or without the COOH-terminal tailpiece and with serial deletions from their NH2-termini. Deletion of the 35 residue COOH-terminal nonhelical tailpiece was sufficient to increase the critical concentration for myosin rod assembly by 50-fold (at 150 mM NaCl, pH 7.5), whereas NH2-terminal deletions had only minor effects. The only exception was the longest NH2-terminal deletion, which reduced the rod to 119 amino acids and rendered it assembly incompetent. The COOH-terminal tailpiece could be reduced by 15 amino acids and it still efficiently promoted assembly. We also found that the tailpiece promoted assembly of both filaments and segments; assemblies which have different molecular overlaps. Rod fragments carrying the COOH-terminal tailpiece did not promote the assembly of COOH-terminally deleted material when the two were mixed together. The tailpiece sequence thus has profound effects on assembly, yet it is apparently unstructured and can be bisected without affecting its function. Taken together these observations suggest that the nonhelical tailpiece may act sterically to block an otherwise dominant but unproductive molecular interaction in the self assembly process and does not, as has been previously thought, bind to a specific target site(s) on a neighboring molecule.     

Segregation and activation of myosin IIB creates a rear in migrating cells

We have found that MLC-dependent activation of myosin IIB in migrating cells is required to form an extended rear, which coincides with increased directional migration. Activated myosin IIB localizes prominently at the cell rear and produces large, stable actin filament bundles and adhesions, which locally inhibit protrusion and define the morphology of the tail. Myosin IIA forms de novo filaments away from the myosin IIB–enriched center and back to form regions that support protrusion. The positioning and dynamics of myosin IIA and IIB depend on the self-assembly regions in their coiled-coil C terminus. COS7 and B16 melanoma cells lack myosin IIA and IIB, respectively; and show isoform-specific front-back polarity in migrating cells. These studies demonstrate the role of MLC activation and myosin isoforms in creating a cell rear, the segregation of isoforms during filament assembly and their differential effects on adhesion and protrusion, and a key role for the noncontractile region of the isoforms in determining their localization and function.     

Dual regulatory functions of the thin filament revealed by replacement of the troponin I inhibitory peptide with a linker

Striated muscles are relaxed under low Ca(2+) concentration conditions due to actions of the thin filament protein troponin. To investigate this regulatory mechanism, an 11-residue segment of cardiac troponin I previously termed the inhibitory peptide region was studied by mutagenesis. Several mutant troponin complexes were characterized in which specific effects of the inhibitory peptide region were abrogated by replacements of 4-10 residues with Gly-Ala linkers. The mutations greatly impaired two of troponin's actions under low Ca(2+) concentration conditions: inhibition of myosin subfragment 1 (S1)-thin filament MgATPase activity and cooperative suppression of myosin S1-ADP binding to thin filaments with low myosin saturation. Inhibitory peptide replacement diminished but did not abolish the Ca(2+) dependence of the ATPase rate; ATPase rates were at least 2-fold greater when Ca(2+) rather than EGTA was present. This residual regulation was highly cooperative as a function of Ca(2+) concentration, similar to the degree of cooperativity observed with WT troponin present. Other effects of the mutations included 2-fold or less increases in the apparent affinity of the thin filament regulatory Ca(2+) sites, similar decreases in the affinity of troponin for actin-tropomyosin regardless of Ca(2+), and increases in myosin S1-thin filament ATPase rates in the presence of saturating Ca(2+). The overall results indicate that cooperative myosin binding to Ca(2+)-free thin filaments depends upon the inhibitory peptide region but that a cooperatively activating effect of Ca(2+) binding does not. The findings suggest that these two processes are separable and involve different conformational changes in the thin filament.     

Assembly of thick filaments and myofibrils occurs in the absence of the myosin head

We investigated the importance of the myosin head in thick filament formation and myofibrillogenesis by generating transgenic Drosophila lines expressing either an embryonic or an adult isoform of the myosin rod in their indirect flight muscles. The headless myosin molecules retain the regulatory light-chain binding site, the alpha-helical rod and the C-terminal tailpiece. Both isoforms of headless myosin co-assemble with endogenous full-length myosin in wild-type muscle cells. However, rod polypeptides interfere with muscle function and cause a flightless phenotype. Electron microscopy demonstrates that this results from an antimorphic effect upon myofibril assembly. Thick filaments assemble when the myosin rod is expressed in mutant indirect flight muscles where no full-length myosin heavy chain is produced. These filaments show the characteristic hollow cross-section observed in wild type. The headless thick filaments can assemble with thin filaments into hexagonally packed arrays resembling normal myofibrils. However, thick filament length as well as sarcomere length and myofibril shape are abnormal. Therefore, thick filament assembly and many aspects of myofibrillogenesis are independent of the myosin head and these processes are regulated by the myosin rod and tailpiece. However, interaction of the myosin head with other myofibrillar components is necessary for defining filament length and myofibril dimensions.     

Skip residues and charge interactions in myosin II coiled-coils: implications for molecular packing

Molecular packing of myosin II coiled-coil rods into myosin filaments and the role of skip residues in the heptad sequence have been investigated. Sequence comparison of rods from skeletal, smooth and non-muscle myosin II shows that different myosin II subtypes have significantly different charge distributions. Analysis of the ionic interactions between adjacent rods with changing molecular overlap relates the different patterns of charge to the different structures of skeletal and smooth muscle myosin II filaments. It is shown in the case of skeletal muscle myosin II that the skip residues have a critical role in keeping these unique patterns of charge in perfect phase. Only one of the previously suggested packing models for myosin II filaments, with a slight modification, is supported, since it satisfies all the sequence-predicted axial shifts between adjacent rods. Such analysis significantly advances understanding of myosin filament assembly properties and will help to provide a basis for the proper understanding of myosin-associated diseases.     

Myosin filament assembly requires a cluster of four positive residues located in the rod domain

Myosin has an intrinsic ability to organize into ordered thick filaments that mediate muscle contraction. Here, we use surface plasmon resonance and light scattering analysis to further characterize the molecular determinants that guide myosin filament assembly. Both assays identify a cluster of lysine and arginine residues as important for myosin polymerization in vitro. Moreover, in cardiomyocytes, replacement of these charged residues by alanine severely affects the incorporation of myosin into the distal ends of the sarcomere. Our findings show that a novel assembly element with a distinct charge profile is present at the C-terminus of sarcomeric myosins.

Structured summary of protein interactions

WT LMMbinds to WT LMM by surface plasmon resonance (View Interaction)WT LMMbinds to CT2 LMM by surface plasmon resonance (View Interaction)WT LMMbinds to Alanine mutant LMM by surface plasmon resonance (View Interaction)WT LMM and WT LMMbind by light scattering (View Interaction)Alanine mutant LMM and Alanine mutant LMMbind by light scattering (View Interaction)WT LMM and Alanine mutant LMMbind by light scattering (View Interaction)     

A Highlights from MBoC Selection: Expansion and concatenation of nonmuscle myosin IIA filaments drive cellular contractile system formation during interphase and mitosis

Cell movement and cytokinesis are facilitated by contractile forces generated by the molecular motor, nonmuscle myosin II (NMII). NMII molecules form a filament (NMII-F) through interactions of their C-terminal rod domains, positioning groups of N-terminal motor domains on opposite sides. The NMII motors then bind and pull actin filaments toward the NMII-F, thus driving contraction. Inside of crawling cells, NMIIA-Fs form large macromolecular ensembles (i.e., NMIIA-F stacks), but how this occurs is unknown. Here we show NMIIA-F stacks are formed through two non–mutually exclusive mechanisms: expansion and concatenation. During expansion, NMIIA molecules within the NMIIA-F spread out concurrent with addition of new NMIIA molecules. Concatenation occurs when multiple NMIIA-Fs/NMIIA-F stacks move together and align. We found that NMIIA-F stack formation was regulated by both motor activity and the availability of surrounding actin filaments. Furthermore, our data showed expansion and concatenation also formed the contractile ring in dividing cells. Thus interphase and mitotic cells share similar mechanisms for creating large contractile units, and these are likely to underlie how other myosin II–based contractile systems are assembled.     

Filament-dependent and -independent localization modes of Drosophila non-muscle myosin II

Myosin II assembles into force-generating filaments that drive cytokinesis and the organization of the cell cortex. Regulation of myosin II activity can occur through modulation of filament assembly and by targeting to appropriate cellular sites. Here we show, using salt-dependent solubility and a novel fluorescence resonance energy transfer assay, that assembly of the Drosophila non-muscle myosin II heavy chain, zipper, is mediated by a 90-residue region (1849-1940) of the coiled-coil tail domain. This filament assembly domain, transiently expressed in Drosophila S2 cells, does not localize to the interphase cortex or the cytokinetic cleavage furrow, whereas a 500-residue region (1350-1865) that overlaps the NH(2) terminus of the assembly domain localizes to the interphase cortex but not the cytokinetic cleavage furrow. Targeting to these two sites appears to utilize distinct localization mechanisms as the assembly domain is required for cleavage furrow recruitment of a truncated coiled-coil tail region but not targeting to the interphase cortex. These results delineate the requirements for zipper filament assembly and indicate that the ability to form filaments is necessary for targeting to the cleavage furrow but not to the interphase cortex.     

Actomyosin tension is required for correct recruitment of adherens junction components and zonula occludens formation

The adherens junction (AJ) densely associated with actin filaments is a major cell-cell adhesion structure. To understand the importance of actin filament association in AJ formation, we first analyzed punctate AJs in NRK fibroblasts where one actin cable binds to one AJ structure unit. The accumulation of AJ components such as the cadherin/catenin complex and vinculin, as well as the formation of AJ-associated actin cables depended on Rho activity. Inhibitors for the Rho target, ROCK, which regulates myosin II activity, and for myosin II ATPase prevented the accumulation of AJ components, indicating that myosin II activity is more directly involved than Rho activity. Depletion of myosin II by RNAi showed similar results. The inhibition of myosin II activity in polarized epithelial MTD-1A cells affected the accumulation of vinculin to circumferential AJ (zonula adherens). Furthermore, correct zonula occludens (tight junction) formation along the apicobasal axis that requires cadherin activity was also impaired. Although MDCK cells which are often used as typical epithelial cells do not have a typical zonula adherens, punctate AJs formed dependently on myosin II activity by inducing wound closure in a MDCK cell sheet. These findings suggest that tension generated by actomyosin is essential for correct AJ assembly.     

Crystal structure of a trimeric form of the KV7.1 (KCNQ1) A‐domain tail coiled‐coil reveals structural plasticity and context dependent changes in a putative coiled‐coil trimerization motif

Coiled-coils are widespread protein–protein interaction motifs typified by the heptad repeat (abcdefg)_n in which “a” and “d” positions are hydrophobic residues. Although identification of likely coiled-coil sequences is robust, prediction of strand order remains elusive. We present the X-ray crystal structure of a short form (residues 583–611), “Q1-short,” of the coiled-coil assembly specificity domain from the voltage-gated potassium channel Kv7.1 (KCNQ1) determined at 1.7 Å resolution. Q1-short lacks one and half heptads present in a previously studied tetrameric coiled-coil construct, Kv7.1 585–621, “Q1-long.” Surprisingly, Q1-short crystallizes as a trimer. In solution, Q1-short self-assembles more poorly than Q1-long and depends on an R-h-x-x-h-E motif common to trimeric coiled-coils. Addition of native sequences that include “a” and “d” positions C-terminal to Q1-short overrides the R-h-x-x-h-E motif influence and changes assembly state from a weakly associated trimer to a strongly associated tetramer. These data provide a striking example of a naturally occurring amino sequence that exhibits context-dependent folding into different oligomerization states, a three-stranded versus a four-stranded coiled-coil. The results emphasize the degenerate nature of coiled-coil energy landscapes in which small changes can have drastic effects on oligomerization. Discovery of these properties in an ion channel assembly domain and prevalence of the R-h-x-x-h-E motif in coiled-coil assembly domains of a number of different channels that are thought to function as tetrameric assemblies raises the possibility that such sequence features may be important for facilitating the assembly of intermediates en route to the final native state.     

The carboxyl-terminal isoforms of smooth muscle myosin heavy chain determine thick filament assembly properties.

The alternatively spliced SM1 and SM2 smooth muscle myosin heavy chains differ at their respective carboxyl termini by 43 versus 9 unique amino acids. To determine whether these tailpieces affect filament assembly, SM1 and SM2 myosins, the rod region of these myosin isoforms, and a rod with no tailpiece (tailless), were expressed in Sf 9 cells. Paracrystals formed from SM1 and SM2 rod fragments showed different modes of molecular packing, indicating that the tailpieces can influence filament structure. The SM2 rod was less able to assemble into stable filaments than either SM1 or the tailless rods. Expressed full-length SM1 and SM2 myosins showed solubility differences comparable to the rods, establishing the validity of the latter as a model for filament assembly. Formation of homodimers of SM1 and SM2 rods was favored over the heterodimer in cells coinfected with both viruses, compared with mixtures of the two heavy chains renatured in vitro. These results demonstrate for the first time that the smooth muscle myosin tailpieces differentially affect filament assembly, and suggest that homogeneous thick filaments containing SM1 or SM2 myosin could serve distinct functions within smooth muscle cells.     

Common Structural Motifs for the Regulation of Divergent Class II Myosins

This minireview focuses on structural studies that have provided insights into our current understanding of thick filament regulation in muscle. We describe how different domains in the myosin molecule interact to produce an inactive “off” state; included are head-head and head-rod interactions, the role of the regulatory light chain, and the significance of the α-helical coiled-coil rod in regulation. Several of these interactions have now been visualized in a wide variety of native myosin filaments, testifying to the generality of these structural motifs across the phylogenetic tree.     

Characterization of the Interaction between the Salmonella Type III Secretion System Tip Protein SipD and the Needle Protein PrgI by Paramagnetic Relaxation Enhancement

Many Gram-negative bacteria that cause major diseases and mortality worldwide require the type III secretion system (T3SS) to inject virulence proteins into their hosts and cause infections. A structural component of the T3SS is the needle apparatus, which consists of a base, an external needle, and a tip complex. In Salmonella typhimurium, the external needle is assembled by the polymerization of the needle protein PrgI. On top of this needle sits a tip complex, which is partly formed by the tip protein SipD. How SipD interacts with PrgI during the assembly of the T3SS needle apparatus remains unknown. The central region of PrgI forms an α-helical hairpin, whereas SipD has a long central coiled-coil, which is a defining structural feature of other T3SS tip proteins as well. Using NMR paramagnetic relaxation enhancement, we have identified a specific region on the SipD coiled-coil that interacts directly with PrgI. We present a model of how SipD might dock at the tip of the needle based on our paramagnetic relaxation enhancement results, thus offering new insight about the mechanism of assembly of the T3SS needle apparatus.     

Enzymatic activity and filament assembly of Acanthamoeba myosin II are regulated by adjacent domains at the end of the tail

Polyclonal antibodies raised against a synthetic peptide consisting of the last 19 amino acids at the end of the coiled-coil region of the heavy chains inhibited the actin-activated Mg2+-ATPase activity of myosin II and its ability to form filaments. Antibodies against a synthetic peptide corresponding to the 21 adjacent amino acids at the beginning of the non-helical tailpiece, which include the three regulatory phosphorylatable serines, had no effect on either activity.