Biodegradation of poly(l-lactide)

The biodegradation of poly(L-lactide) (PLA) is reviewed. The important role of actinomycetes in PLA degradation is emphasized. These PLA-degrading actinomycetes belong phylogenetically to the Pseudonocardiaceae family and related genera, including Amycolatopsis, Lentzea, Streptoalloteichus, Kibdelosporangium and Saccharothrix. A PLA-degrading enzyme purified from an isolated Amycolatopsis strain-41 has substrate specificity on PLA higher than proteinase K. The application of these strains and their enzymes can be effectively used for biological treatment of plastic wastes containing PLA.     

Identification and characterization of novel poly(<Emphasis Type="SmallCaps">dl</Emphasis>-lactic acid) depolymerases from metagenome

Many poly(lactic acid) (PLA)-degrading microorganisms have been isolated from the natural environment by culture-based methods, but there is no study about unculturable PLA-degrading microorganisms. In this study, we constructed a metagenomic library consisting of the DNA extracted from PLA disks buried in compost. We identified three PLA-degrading genes encoding lipase or hydrolase. The purified enzymes degraded not only PLA, but also various aliphatic polyesters, tributyrin, and p-nitrophenyl esters. From their substrate specificities, the PLA depolymerases were classified into an esterase rather than a lipase. Among the PLA depolymerases, PlaM4 exhibited thermophilic properties; that is, it showed the highest activity at 70 degrees C and was stable even after incubation for 1 h at 50 degrees C. PlaM4 had absorption and degradation activities for solid PLA at 60 degrees C, which indicates that the enzyme can effectively degrade PLA in a high-temperature environment. On the other hand, the enzyme classification based on amino acid sequences showed that the other PLA depolymerases, PlaM7 and PlaM9, were not classified into known lipases or esterases. This is the first report on the identification and characterization of PLA depolymerase from a metagenome.     

Purification and characterization of poly(L-lactic acid)-degrading enzymes from Amycolatopsis orientalis ssp. orientalis

Polylactide or poly(l-lactic acid) (PLA) is a commercially promising material for use as a renewable and biodegradable plastic. Three novel PLA-degrading enzymes, named PLAase I, II and III, were purified to homogeneity from the culture supernatant of an effective PLA-degrading bacterium, Amycolatopsis orientalis ssp. orientalis. The molecular masses of these three PLAases as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis were 24.0, 19.5 and 18.0 kDa, with the pH optima being 9.5, 10.5 and 9.5, respectively. The optimal temperature for the enzyme activities was 50-60 degrees C. All the purified enzymes could degrade high-molecular-weight PLA film as well as casein, and the PLA-degrading activities were strongly inhibited by serine protease inhibitors such as phenylmethylsulfonyl fluoride and aprotinin, but were not susceptive to chymostatin and pepstatin. Taken together, these data demonstrated that A. orientalis ssp. orientalis produces multiple serine-like proteases to utilize extracellular polylactide as a sole carbon source.     

Production of poly(l-lactide)-degrading enzyme by Amycolatopsis orientalis for biological recycling of poly(l-lactide)

Efficient production of poly(l-lactide)(PLA)-degrading enzyme was achieved by addition of 0.1% (w/v) silk fibroin powder into a liquid culture medium of an actinomycete, Amycolatopsis orientalis, without other complex nitrogen sources, such as yeast extract and peptone. Scaled-up production of the enzyme in a 5-l jar fermenter showed the possibility of producing this enzyme on an industrial scale at low production cost. The extracellular PLA-degrading enzyme showed potent degrading activity, which is effective for biological recycling of PLA, i.e., 2,000 mg/l of PLA powder was completely degraded within 8 h at 40°C using 20 mg/l purified enzyme. An optically active l-lactic acid with 600 mg/l was obtained as degradation product of PLA without undesirable racemization.     

Gene cloning and molecular characterization of an extracellular poly(L-lactic acid) depolymerase from Amycolatopsis sp. strain K104-1

We have isolated a polylactide or poly(L-lactic acid) (PLA)-degrading bacterium, Amycolatopsis sp. strain K104-1, and purified PLA depolymerase (PLD) from the culture fluid of the bacterium. Here, we cloned and expressed the pld gene encoding PLD in Streptomyces lividans 1326 and characterized a recombinant PLD (rPLD) preparation. We also describe the processing mechanism from nascent PLD to mature PLD. The pld gene encodes PLD as a 24,225-Da polypeptide consisting of 238 amino acids. Biochemical and Western immunoblot analyses of PLD and its precursors revealed that PLD is synthesized as a precursor (prepro-type), requiring proteolytic cleavage of the N-terminal 35-amino-acid extension including the 26-amino-acid signal sequence and 9-residue prosequence to generate the mature enzyme of 20,904 Da. The cleavage of the prosequence was found to be autocatalytic. PLD showed about 45% similarity to many eukaryotic serine proteases. In addition, three amino acid residues, H57, D102, and S195 (chymotrypsin numbering), which are implicated in forming the catalytic triad necessary for cleavage of amide bond of substrates in eukaryotic serine proteases, were conserved in PLD as residues H74, D111, and S197. The G193 residue (chymotrypsin numbering), which is implicated in forming an oxyanion hole with residue S195 and forms an important hydrogen bond for interaction with the carbonyl group of the scissile peptide bond, was also conserved in PLD. The functional analysis of the PLD mutants H74A, D111A, and S197A revealed that residues H74, D111, and S197 are important for the depolymerase and caseinolytic activities of PLD and for cleavage of the prosequence from pro-type PLD to form the mature one. The PLD preparation had elastase activity which was not inhibited by 1 mM elastatinal, which is 10 times higher than needed for complete inhibition of porcine pancreatic elastase. The rPLD preparation degraded PLA with an average molecular mass of 220 kDa into lactic acid dimers through lactic acid oligomers and finally into lactic acid. The PLD preparation bound to high polymers of 3-hydoxybutyrate, epsilon-caprolacton, and butylene succinate as well as PLA, but it degraded only PLA.     

Poly(L-lactide)-degrading enzyme production by Actinomadura keratinilytica T16-1 in 3 L airlift bioreactor and its degradation ability for biological recycle

The optimal physical factors affecting enzyme production in an airlift fermenter have not been studied so far. Therefore, the physical parameters such as aeration rate, pH, and temperature affecting PLA-degrading enzyme production by Actinomadura keratinilytica strain T16-1 in a 3 l airlift fermenter were investigated. The response surface methodology (RSM) was used to optimize PLA-degrading enzyme production by implementing the central composite design. The optimal conditions for higher production of PLA-degrading enzyme were aeration rate of 0.43 vvm, pH of 6.85, and temperature at 46° C. Under these conditions, the model predicted a PLA-degrading activity of 254 U/ml. Verification of the optimization showed that PLA-degrading enzyme production of 257 U/ml was observed after 3 days cultivation under the optimal conditions in a 3 l airlift fermenter. The production under the optimized condition in the airlift fermenter was higher than un-optimized condition by 1.7 folds and 12 folds with un-optimized medium or condition in shake flasks. This is the first report on the optimization of environmental conditions for improvement of PLA-degrading enzyme production in a 3 l airlift fermenter by using a statistical analysis method. Moreover, the crude PLA-degrading enzyme could be adsorbed to the substrate and degraded PLA powder to produce lactic acid as degradation products. Therefore, this incident indicates that PLA-degrading enzyme produced by Actinomadura keratinilytica NBRC 104111 strain T16-1 has a potential to degrade PLA to lactic acid as a monomer and can be used for the recycle of PLA polymer.     

Purification and characterization of an extracellular poly(3-hydroxybutyrate-co-3-hydroxyvalerate) depolymerase from Acidovorax sp. HB01

The poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-degrading strain Acidovorax sp. HB01 was isolated from an activated sludge sample. A novel PHBV depolymerase with a molecular weight of 43.4 kDa was purified to homogeneity from the culture supernatant of the HB01 strain. The optimum pH and temperature of the PHBV depolymerase were 7.0 and 50 °C, respectively. The PHBV depolymerase can also degrade polyhydroxybutyrate, poly (3-hydroxybutyrate-co-4-hydroxybutyrate), and poly(caprolactone); however, the PHBV degradation activity of the depolymerase is higher than its activity against the other polymers. Effect of metal ions and various inhibitors on the PHBV depolymerase activity was examined. The addition of Na(+), K(+), and Ca(2+) markedly increased the hydrolysis rate, whereas the enzyme activity was inhibited by Zn(2+), Mg(2+), Mn(2+), and particularly by Cu(2+) and Fe(2+). Ethylenediaminetetraacetic acid was found to have a significant inhibitory effect. The main degradation product of depolymerase was identified as the 3-hydroxybutyric acid monomer and 3-hydroxyvaleric acid monomers via mass spectrometry.     

Development of fermentation process for PLA-degrading enzyme production by a new thermophilic Actinomadura sp. T16-1

The fermentation process for a poly (L-lactide) (PLA)-degrading enzyme production by a newly isolate of thermophilic PLA-degrading Actinomadura sp. T16-1 was investigated. The strain produced 33.9 U/mL of enzyme activity after cultivation at 50°C under shaking of 150 rpm for 96 h in a medium consisting of (w/v) 0.05% PLA film, 0.2% gelatin, 0.4% (NH₄)₂SO₄, 0.4% K₂HPO₄, 0.2 % KH₂PO₄, and 0.02% MgSO₄ · 7H₂O. The optimal concentration of PLA film and gelatin obtained by response surface methodology (RSM) for the highest production of PLA-degrading enzyme was 0.035% (w/v) and 0.238% (w/v), respectively. Under these conditions, the model predicted 40.4 U/mL of PLA-degrading activity and the verification of the optimization showed 44.6 U/mL of PLA-degrading enzymatic activity in the flasks experiment. The maximum PLA-degrading activity reached 150 U/mL within 72 h cultivation in the 3-L airlift fermenter.     

Isolation of a microorganism capable of degrading poly-(L-lactide)

The isolation of poly-(L-lactide) (PLA)-degrading microorganisms was investigated. A PLA-degrading actinomycete, strain No. 3118, was isolated and tentatively identified as a member of the genus Amycolatopsis. The optimum conditions for degradation of PLA were 43 degrees C at about pH 7 in a mineral salt medium with a low concentration of organic nutrients (0.002% yeast extract). The original shape of PLA film (Mw=2.3x10(5) after sterilization, 20 &mgr;m thick) disappeared within 2 weeks. Lactic acid was detected after the film was incubated with culture supernatant.     

A chymotrypsin-like proteinase from the midgut of Tenebrio molitor larvae

A chymotrypsin-like proteinase was isolated from the posterior midgut of larvae of the yellow mealworm, Tenebrio molitor, by ion-exchange and gel filtration chromatography. The enzyme, TmC1, was purified to homogeneity as determined by SDS-PAGE and postelectrophoretic activity detection. TmC1 had a molecular mass of 23.0 kDa, pI of 8.4, a pH optimum of 9.5, and the optimal temperature for activity was 51 degrees C. The proteinase displayed high stability at temperatures below 43 degrees C and in the pH range 6.5-11.2, which is inclusive of the pH of the posterior and middle midgut. The enzyme hydrolyzed long chymotrypsin peptide substrates SucAAPFpNA, SucAAPLpNA and GlpAALpNA and did not hydrolyze short chymotrypsin substrates. Kinetic parameters of the enzymatic reaction demonstrated that the best substrate was SucAAPFpNA, with k(cat app) 36.5 s(-1) and K(m) 1.59 mM. However, the enzyme had a lower K(m) for SucAAPLpNA, 0.5 mM. Phenylmethylsulfonyl fluoride (PMSF) was an effective inhibitor of TmC1, and the proteinase was not inhibited by either tosyl-l-phenylalanine chloromethyl ketone (TPCK) or N(alpha)-tosyl-l-lysine chloromethyl ketone (TLCK). However, the activity of TmC1 was reduced with sulfhydryl reagents. Several plant and insect proteinaceous proteinase inhibitors were active against the purified enzyme, the most effective being Kunitz soybean trypsin inhibitor (STI). The N-terminal sequence of the enzyme was IISGSAASKGQFPWQ, which was up to 67% similar to other insect chymotrypsin-like proteinases and 47% similar to mammalian chymotrypsin A. The amino acid composition of TmC1 differed significantly from previously isolated T. molitor enzymes.     

Fusarium polycaprolactone depolymerase is cutinase.

Polycaprolactone (PCL), a synthetic polyester, is degraded by a variety of microorganisms, including some phytopathogens. Many phytopathogens secrete cutinase, a serine hydrolase that degrades cutin, the structural polymer of the plant cuticle. We compared wild-type strains and a cutinase-negative gene replacement mutant strain of Fusarium solani f. sp. pisi (D. J. Stahl and W. Schäfer, Plant Cell 4:621-629, 1992) and a wild-type strain of Fusarium moniliforme to show that Fusarium cutinase is a PCL depolymerase. The wild-type strains, but not the mutant strain, (i) degraded PCL and used it as a source of carbon and energy, (ii) showed induction of secreted PCL depolymerase and an esterase activity of cutinase when grown in the presence of cutin, and (iii) showed induction of PCL depolymerase and an esterase activity of cutinase when grown in the presence of a hydrolysate of PCL, which contains PCL oligomers that are structurally similar to the natural inducers of cutinase. These results together with other details of regulation and conditions for optimal enzyme activity indicate that the Fusarium PCL depolymerase, required for degradation and utilization of PCL, is cutinase.     

Novel Extracellular PHB Depolymerase from Streptomyces ascomycinicus: PHB Copolymers Degradation in Acidic Conditions

The ascomycin-producer strain Streptomyces ascomycinicus has been proven to be an extracellular poly(R)-3-hydroxybutyrate (PHB) degrader. The fkbU gene, encoding a PHB depolymerase (PhaZ_Sa), has been cloned in E. coli and Rhodococcus sp. T104 strains for gene expression. Gram-positive host Rhodococcus sp. T104 was able to produce and secrete to the extracellular medium an active protein form. PhaZ_Sa was purified by two hydrophobic interaction chromatographic steps, and afterwards was biochemically as well as structurally characterized. The enzyme was found to be a monomer with a molecular mass of 48.4 kDa, and displayed highest activity at 45°C and pH 6, thus being the first PHB depolymerase from a gram-positive bacterium presenting an acidic pH optimum. The PHB depolymerase activity of PhaZ_Sa was increased in the presence of divalent cations due to non-essential activation, and also in the presence of methyl-β-cyclodextrin and PEG 3350. Protein structure was analyzed, revealing a globular shape with an alpha-beta hydrolase fold. The amino acids comprising the catalytic triad, Ser¹³¹-Asp²⁰⁹-His²⁶⁹, were identified by multiple sequence alignment, chemical modification of amino acids and site-directed mutagenesis. These structural results supported the proposal of a three-dimensional model for this depolymerase. PhaZ_Sa was able to degrade PHB, but also demonstrated its ability to degrade films made of PHB, PHBV copolymers and a blend of PHB and starch (7∶3 proportion wt/wt). The features shown by PhaZ_Sa make it an interesting candidate for industrial applications involving PHB degradation.     

Cloning and sequencing of a poly(DL-lactic acid) depolymerase gene from Paenibacillus amylolyticus strain TB-13 and its functional expression in Escherichia coli

The gene encoding a poly(DL-lactic acid) (PLA) depolymerase from Paenibacillus amylolyticus strain TB-13 was cloned and overexpressed in Escherichia coli. The purified recombinant PLA depolymerase, PlaA, exhibited degradation activities toward various biodegradable polyesters, such as poly(butylene succinate), poly(butylene succinate-co-adipate), poly(ethylene succinate), and poly(epsilon-caprolactone), as well as PLA. The monomeric lactic acid was detected as the degradation product of PLA. The substrate specificity toward triglycerides and p-nitrophenyl esters indicated that PlaA is a type of lipase. The gene encoded 201 amino acid residues, including the conserved pentapeptide Ala-His-Ser-Met-Gly, present in the lipases of mesophilic Bacillus species. The identity of the amino acid sequence of PlaA with Bacillus lipases was no more than 45 to 50%, and some of its properties were different from those of these lipases.     

Studies on the biodegradability of polythioester copolymers and homopolymers by polyhydroxyalkanoate (PHA)-degrading bacteria and PHA depolymerases

The biodegradability of microbial polythioesters (PTEs), a novel class of biopolymers which were discovered recently and can be produced by polyhydroxyalkanoate (PHA)-accumulating bacteria, was studied. Using poly(3-hydroxybutyrate-co-3-mercaptopropionate) [poly(3HB-co-3MP)] as sole carbon source for screening, 22 new bacterial strains were isolated and characterized. Interestingly, none of the PHA-degrading bacteria was able to utilize the homopolymer poly(3MP) as a carbon source for growth or to form clear zones on poly(3MP)-containing agar plates. The extracellular PHA depolymerases from two strains ( Schlegelella thermodepolymerans, Pseudomonas indica K2) were purified to electrophoretic homogeneity and biochemically characterized. The PHA depolymerase of S. thermodepolymerans exhibited a temperate optimum of about 75°C to 80°C and was stable at 70°C for more than 24 h. Regarding the substrate specificities of the PHA depolymerase of S. thermodepolymerans, enzyme activities decreased significantly with increasing 3MP content of the copolymer substrates. Interestingly, no activity could be detected with homoPTEs consisting only of 3MP or of 3-mercaptobutyrate. Similar results were obtained with the PHA depolymerases PhaZ2, PhaZ5 and PhaZ7 of Paucimonas lemoignei which were also investigated. The PHA depolymerase of Ps. indica K2 did not cleave any of the investigated polymers containing 3MP. Gas chromatography, infrared and ¹H-NMR spectrometry and matrix-assisted laser desorption/ionization time-of-flight analysis revealed that 3MPs containing oligomers were enriched in the water-insoluble fraction remaining after partial digestion of poly(3HB-co-3MP) by purified poly(3HB) depolymerase of S. thermodepolymerans. In contrast, 3HB was enriched in the water-soluble fraction, which also contained 3HB-co-3MP dimer obtained by partial digestion of this copolymer by the enzyme. This study clearly indicates that PHA depolymerases are specific for oxoester linkages of PHAs and that the thioester bonds of PTEs cannot be cleaved by this type of enzyme.This publication is dedicated to Prof. Dr. Hans G. Schlegel in honor of his 80th birthday     

Isolation and Characterization of Polyester-Based Plastics-Degrading Bacteria from Compost Soils

Four potential polyester-degrading bacterial strains were isolated from compost soils in Thailand. These bacteria exhibited strong degradation activity for polyester biodegradable plastics, such as polylactic acid (PLA), polycaprolactone (PCL), poly-(butylene succinate) (PBS) and polybutylene succinate-co-adipate (PBSA) as substrates. The strains, classified according to phenotypic characteristics and 16S rDNA sequence, belonging to the genera Actinomadura, Streptomyces and Laceyella, demonstrated the best polyester- degrading activities. All strains utilized polyesters as a carbon source, and yeast extract with ammonium sulphate was utilized as a nitrogen source for enzyme production. Optimization for polyester-degrading enzyme production by Actinomadura sp. S14, Actinomadura sp. TF1, Streptomyces sp. APL3 and Laceyella sp. TP4 revealed the highest polyester-degrading activity in culture broth when 1% (w/v) PCL (18 U/mL), 0.5% (w/v) PLA (22.3 U/mL), 1% (w/v) PBS (19.4 U/mL) and 0.5% (w/v) PBSA (6.3 U/mL) were used as carbon sources, respectively. All strains exhibited the highest depolymerase activities between pH 6.0–8.0 and temperature 40–60°C. Partial nucleotides of the polyester depolymerase gene from strain S14, TF1 and APL3 were studied. We determined the amino acids making up the depolymerase enzymes had a highly conserved pentapeptide catalytic triad (Gly-His-Ser-Met-Gly), which has been shown to be part of the esterase-lipase superfamily (serine hydrolase).     

Characterization of an alkaline protease from Bacillus sp. no. AH-101

Summary The Bacillus sp. no. AH-101 alkaline protease showed higher hydrolysing activity against insoluble fibrous natural proteins such as elastin and keratin in comparison with subtilisins and Proteinase K. The optimum pH of the enzyme toward elastin and keratin was pH 10.5 and pH 11.0–12.0 respectively. The specific activity toward elastin and keratin was 10 600 units/mg protein and 3970 units/mg protein, respectively. The enzymatic activity was not inhibited by p-chloromercuribenzoic acid and iodoacetic acid. Carbobenzoxy-glycyl-glycyl-L-phenylalanyl chloromethyl ketone completely inhibited the caseinolytic activity, but 36% elastolytic activity remained. No inhibitory effect on caseinolytic and elastolytic activity was shown by tosyl-L-phenylalanyl-chloromethyl ketone, tosyl-L-lysine chloromethyl ketone, carbobenzoxy-L-phenylalanyl chloromethyl ketone, and elastatinal. The amino acid composition and amino terminal sequence of the enzyme were determined. The no. AH-101 alkaline protease was compared with subtilisin BPN', subtilisin Carlsberg, no. 221, and Ya-B alkaline proteases. Extensive sequence homology existed among these enzymes. Offprint requests to: H. Takami     

An extracellular poly (3-hydroxybutyrate) depolymerase from Penicillium sp. DS9713a-01

Summary Penicillium sp. DS9713a-01 was obtained by ultraviolet (u.v.) light mutagenesis from the Penicillium sp. DS9713a which can degrade poly (3-hydroxybutyrate) (PHB). The enzymatic activity of DS9713a-01 was 97% higher than that of the wild-type strain. The DS9713a-01 mutant could completely degrade PHB films in 5 days; however, the wild-type strain achieved only 61% at the same time. The extracellular PHB depolymerase was purified from the culture medium containing PHB as the sole carbon source by filtration, ammonium sulfate precipitation and chromatography on Sepharose CL-6B. The molecular weight of the PHB depolymerase was about 15.1kDa determined by SDS-polyacrylamide gel electrophoresis. The optimum activity of the PHB depolymerase was observed at pH 8.6 and 50 °C. The enzyme was stable at temperatures below 37 °C and in the pH range from 8.0 to 9.2. The activity of PHB depolymerase could be activated or inhibited by some metal ions. The apparent K _m value was 0.164 mg ml⁻¹. Mass spectrometric analysis of the water-soluble products after enzymatic degradation revealed that the primary product was the monomer, 3-hydroxybutyric acid.     

A Novel PHB Depolymerase from a Thermophilic Streptomyces Sp.

A novel PHB depolymerase from a thermophilic Streptomyces sp. MG was purified to homogeneity by hydrophobic interaction chromatography and gel filtration. The molecular mass of the purified enzyme was 43 kDa as determined by size exclusion chromatography and 41 kDa by SDS-PAGE. The optimum pH and temperature were 8.5 and 60 °C respectively. The enzyme was stable at 50 °C and from pH 6.5–8.5. The enzyme hydrolyzed not only bacterial polyesters, i.e. poly(3-hydroxybutyric acid and poly(3-hydroxybutyrate-co-3-hydroxyvalerate), but also synthetic, aliphatic polyesters such as polypropiolactone, poly(ethylene adipate) and poly(ethylene succinate). Revisions requested 9 November 2005; Revisions received 12 December 2005     

1株聚乳酸降解细菌的筛选、鉴定及产酶研究

从污泥中筛选出1株对聚乳酸（poly—L—lacticacid,PLA）具有降解活力的细菌DSL09,该菌株对PLA的乳化液、粉末及薄膜都具有降解作用。通过形态学、16SrDNA比对及生理生化特性的分析,鉴定该菌株属于芽胞杆菌属（Bacillus sp．）。为提高该菌株对PLA的降解活力,对其进行了紫外诱变,获得了稳定遗传的突变株DSL09-60b,该突变株的PLA降解活性提高至原始菌株的1．5倍。对该突变株产PLA降解酶的发酵条件进行了优化,经测定DSL09-60b在初始培养基pH为8．0、0．5％酪蛋白为诱导物、接种量6％（体积比）的条件下37℃培养54h时发酵液酶活性最高。