Characterization of two insertion sequences, IS701 and IS702, from the cyanobacterium Calothrix species PCC 7601

We describe the characterization of two insertion elements, IS701 and IS702, isolated from Calothrix species PCC 7601. These insertion elements were cloned from spontaneous pigmentation mutants. Both show the characteristics of typical bacterial insertion sequences, i.e. they present long terminal inverted repeats and they duplicate target DNA upon insertion. These elements share no homology with the only other cyanobacterial insertion sequence described so far, IS891. At least 15 copies of IS701 and 9 copies of IS702 were detected by hybridization experiments in the Calothrix 7601 genome. Their occurrence in several cyanobacterial strains is also reported.     

Identification and characterization of IS1381, a new insertion sequence in Streptococcus pneumoniae.

A new insertion sequence (IS1381) was identified in the genome of Streptococcus pneumoniae R6 as an 846-bp segment containing 20-bp terminal inverted repeats and flanked by 7-bp direct repeats. The three sequenced copies of this element have two overlapping open reading frame (ORF) genes named orfA and orfB. However, significant variations between individual copies were found, suggesting that inactivating mutations have occurred in an original single ORF. Accordingly, the consensus IS1381 element derived from the comparison of the three available copies should contain a single ORF sufficient to encode a basic protein of 267 amino acids which exhibited high similarity to the putative transposases of ISL2 from Lactobacillus helveticus and of IS702 from the cyanobacterium Calothrix sp. strain PCC 7601. A minimum of five to seven copies were detected by hybridization experiments in the R6 genome. In remarkable contrast with the two previously reported pneumococcal insertion sequences, several copies of IS1381 have been detected in all of the clinical isolates tested so far. Interestingly, Streptococcus oralis NCTC 11427 (type strain), a close relative of pneumococcus, does not contain this element, but its occurrence in the type strain of Streptococcus mitis (NCTC 12261) suggests that this species has exchanged DNA with S. pneumoniae directly or through an intermediate species.     

Characterization of an insertion sequence (IS891) of novel structure from the cyanobacterium Anabaena sp. strain M-131.

When recombinant plasmids that were transferred to the cyanobacterium Anabaena sp. strain M-131 were transferred back to Escherichia coli, some of the transformants contained inserts. One of the insertion sequences (ISs) was characterized by sequencing. This 1,351-base-pair IS contained an open reading frame that was capable of encoding a peptide of 310 amino acids and had terminal sequences with distinctive structures, but it lacked terminal inverted repeats and did not duplicate target DNA upon insertion. The element bore no significant sequence homology to any sequence stored in the GenBank data base. Restriction analysis of the genomes of Anabaena sp. strain M-131 and Anabaena sp. strain PCC 7120 showed those strains to be closely related. Sequences homologous to the IS element were also present in the DNA of Anabaena strain PCC 7120, but the copy numbers and chromosomal locations of such sequences differed in the two strains. The largest visualized plasmid was 425 kilobases (kb) in M-131 and 410 kb in PCC 7120; at least the former plasmid contained multiple copies of the element, as did a 115-kb plasmid in M-131.     

Characterization of the IS895 family of insertion sequences from the cyanobacterium Anabaena sp. strain PCC 7120.

A family of repetitive elements from the cyanobacterium Anabaena sp. strain PCC 7120 was identified through the proximity of one element to the psbAI gene. Four members of this seven-member family were isolated and shown to have structures characteristic of bacterial insertion sequences. Each element is approximately 1,200 bp in length, is delimited by a 30-bp inverted repeat, and contains two open reading frames in tandem on the same DNA strand. The four copies differ from each other by small insertions or deletions, some of which alter the open reading frames. By using a system designed to trap insertion elements, one of the elements, denoted IS895, was shown to be mobile. The target site was not duplicated upon insertion of the element. Two other filamentous cyanobacterial strains were also found to contain sequences homologous to IS895.     

Characterization of IS1515, a Functional Insertion Sequence in Streptococcus pneumoniae

We describe the characterization of a new insertion sequence, IS1515, identified in the genome of Streptococcus pneumoniae I41R, an unencapsulated mutant isolated many years ago (R. Austrian, H. P. Bernheimer, E. E. B. Smith, and G. T. Mills, J. Exp. Med. 110:585–602, 1959). A copy of this element located in the cap1E_I41R gene was sequenced. The 871-bp-long IS1515 element possesses 12-bp perfect inverted repeats and generates a 3-bp target duplication upon insertion. The IS encodes a protein of 271 amino acid residues similar to the putative transposases of other insertion sequences, namely IS1381 from S. pneumoniae, ISL2 from Lactobacillus helveticus, IS702 from the cyanobacterium Calothrix sp. strain PCC 7601, and IS112 from Streptomyces albus G. IS1515 appears to be present in the genome of most type 1 pneumococci in a maximum of 13 copies, although it has also been found in the chromosome of pneumococcal isolates belonging to other serotypes. We have found that the unencapsulated phenotype of strain I41R is the result of both the presence of an IS1515 copy and a frameshift mutation in the cap1E_I41R gene. Precise excision of the IS was observed in the type 1 encapsulated transformants isolated in experiments designed to repair the frameshift. These results reveal that IS1515 behaves quite differently from other previously described pneumococcal insertion sequences. Several copies of IS1515 were also able to excise and move to another locations in the chromosome of S. pneumoniae. To our knowledge, this is the first report of a functional IS in pneumococcus.     

IS1675, a novel lactococcal insertion element, forms a transposon-like structure including the lacticin 481 lantibiotic operon

Two copies of IS1675, a novel lactococcal insertion element from the IS4 family, are present on a 70-kb plasmid, where they frame the lantibiotic lacticin 481 operon. The whole structure could be a composite transposon designated Tn5721. This study shows that the lacticin 481 operon does not include any regulatory gene and provides a new example of a transposon-associated bacteriocin determinant. We identified five other IS1675 copies not associated with the lacticin 481 operon. The conservation of IS1675 flanking sequences suggested a 24-bp target site.     

Analysis of the gene encoding the RNA subunit of ribonuclease P from cyanobacteria.

The genes encoding the RNA subunit of ribonuclease P from the unicellular cyanobacterium Synechocystis sp. PCC 6803, and from the heterocyst-forming strains Anabaena sp. PCC 7120 and Calothrix sp. PCC 7601 were cloned using the homologous gene from Anacystis nidulans (Synechococcus sp. PCC 6301) as a probe. The genes and the flanking regions were sequenced. The genes from Anabaena and Calothrix are flanked at their 3'-ends by short tandemly repeated repetitive (STRR) sequences. In addition, two other sets of STRR sequences were detected within the transcribed regions of the Anabaena and Calothrix genes, increasing the length of a variable secondary structure element present in many RNA subunits of ribonuclease P from eubacteria. The ends of the mature RNAs were determined by primer extension and RNase protection. The predicted secondary structure of the three RNAs studied is similar to that of Anacystis and although some idiosyncrasies are observed, fits well with the eubacterial consensus.     

Highly repetitive DNA sequences in cyanobacterial genomes.

We characterized three distinct families of repeated sequences in the genome of the cyanobacterium Calothrix sp. strain PCC 7601. These repeated sequences were present at a level of about 100 copies per Calothrix genome and consisted of tandemly amplified heptanucleotides. These elements were named short tandemly repeated repetitive (STRR) sequences. We used the three different Calothrix STRR sequences as probes to perform Southern hybridization experiments with DNAs extracted from various cyanobacterial strains, Bacillus subtilis, and Escherichia coli. The three different STRR sequences were found as repetitive genomic DNA components specific to the heterocystous strains tested. The role of the STRR sequences, as well as their possible use in taxonomic studies, is discussed.     

Insertion sequence inversions mediated by ectopic recombination between terminal inverted repeats

Transposable elements are widely distributed and diverse in both eukaryotes and prokaryotes, as exemplified by DNA transposons. As a result, they represent a considerable source of genomic variation, for example through ectopic (i.e. non-allelic homologous) recombination events between transposable element copies, resulting in genomic rearrangements. Ectopic recombination may also take place between homologous sequences located within transposable element sequences. DNA transposons are typically bounded by terminal inverted repeats (TIRs). Ectopic recombination between TIRs is expected to result in DNA transposon inversions. However, such inversions have barely been documented. In this study, we report natural inversions of the most common prokaryotic DNA transposons: insertion sequences (IS). We identified natural TIR-TIR recombination-mediated inversions in 9% of IS insertion loci investigated in Wolbachia bacteria, which suggests that recombination between IS TIRs may be a quite common, albeit largely overlooked, source of genomic diversity in bacteria. We suggest that inversions may impede IS survival and proliferation in the host genome by altering transpositional activity. They may also alter genomic instability by modulating the outcome of ectopic recombination events between IS copies in various orientations. This study represents the first report of TIR-TIR recombination within bacterial IS elements and it thereby uncovers a novel mechanism of structural variation for this class of prokaryotic transposable elements.     

Characterization of IS1001, an insertion sequence element of Bordetella parapertussis.

By analysis of repetitive DNA in Bordetella parapertussis, an insertion sequence element, designated IS1001, was identified. Sequence analysis revealed that IS1001 comprised 1,306 bp and contained inverted repeats at its termini. Furthermore, several open reading frames that may code for transposition functions were identified. The largest open reading frame coded for a protein comprising 406 amino acid residues and showed homology to TnpA, which is encoded by an insertion sequence element (IS1096) found in Mycobacterium smegmatis. Examination of flanking sequences revealed that insertion of IS1001 occurs preferentially in stretches of T's or A's and results in a duplication of target sequences of 6 to 8 bases. IS1001 was found in about 20 copies in 10 B. parapertussis strains analyzed. No restriction fragment length polymorphism was observed in B. parapertussis when IS1001 was used as a probe. An insertion sequence element similar or identical to IS1001 was found in B. bronchiseptica strains isolated from pigs and a rabbit. In these strains, about five copies of the IS1001-like element were present at different positions in the bacterial chromosome. Neither B. pertussis nor B. bronchiseptica strains isolated from humans and dogs contained an IS1001-like element. Therefore, IS1001 may be used as a specific probe for the detection of B. parapertussis in human clinical samples.     

Purification and properties of glutamine synthetases from the cyanobacteria Synechocystis sp. strain PCC 6803 and Calothrix sp. strain PCC 7601.

Glutamine synthetases (GSs) from two cyanobacteria, one unicellular (Synechocystis sp. strain PCC 6803) and the other filamentous (Calothrix sp. strain PCC 7601 [Fremyella diplosiphon]), were purified to homogeneity. The biosynthetic activities of both enzymes were strongly inhibited by ADP, indicating that the energy charge of the cell might regulate the GS activity. Both cyanobacteria exhibited an ammonium-mediated repression of GS synthesis. In addition, the Synechocystis sp. showed an inactivation of GS promoted by ammonium that had not been demonstrated previously in cyanobacteria.     

Use of a conditionally lethal gene in Anabaena sp. strain PCC 7120 to select for double recombinants and to entrap insertion sequences.

Use of the sacB gene (J. L. Ried and A. Collmer, Gene 57:239-246, 1987) provides a simple, effective, positive selection for double recombinants in Anabaena sp. strain PCC 7120, a filamentous cyanobacterium. This gene, which encodes the secretory levansucrase of Bacillus subtilis, was inserted into the vector portion of a suicide plasmid bearing a mutant version of a chromosomal gene. Cells of colonies in which such a plasmid had integrated into the Anabaena chromosome through single recombination were plated on solid medium containing 5% sucrose. Under this condition, the presence of the sacB gene is lethal. A small fraction of the cells from initially sucrose-sensitive colonies became sucrose resistant; the majority of these sucrose-resistant derivatives had undergone a second recombinational event in which the sacB-containing vector had been lost and the wild-type form of the chromosomal gene had been replaced by the mutant form. By the use of this technique, we mutated two selected genes in the chromosome of Anabaena sp. strain PCC 7120. The conditionally lethal nature of the sacB gene was also used to detect insertion sequences from this Anabaena strain. Sucrose-resistant colonies derived from cells bearing a sacB-containing autonomously replicating plasmid were analyzed. Five different, presumed insertion sequences were found to have inserted into the sacB gene of the plasmids in these colonies. One of them, denoted IS892, was characterized by physical mapping. It is 1.7 kilobases in size and is present in at least five copies in the genome of Anabaena sp. strain PCC 7120.     

细菌插入序列的转座酶和转座机制

插入序列（insertion sequence, IS）是细菌中最简单的移动遗传因子,由两端的反向重复序列（inverted repeats, IR）和中间的转座酶 (transposase)编码序列组成。在细菌中,因为插入序列的转座酶催化活性中心氨基酸序列不同,所以将其转座酶分为DDE转座酶、DEDD转座酶、HUH转座酶和丝氨酸转座酶。在转座过程中,根据插入序列是否有复制,将插入序列的转座分为复制型转座（replicative -ansposition）和非复制型转座（non-replicative transposition）,而将形成夏皮罗中间体（Shapiro intermediate）的非复制型转座称为保守型转座（conservative transposition）。此外,插入序列通过不同的转座机制插入到基因编码区导致基因突变、缺失和倒置;或者插入到基因上游,通过自身启动子或与基因形成杂交启动子来影响插入序列下游基因的表达,从而帮助细菌抵抗复杂的环境变化。本文主要围绕细菌插入序列的特征、转座酶、转座机制和转座影响展开综述,以期为进一步研究插入序列的机制和插入序列在细菌中所起的作用提供参考。