Phosphorylation in halobacterial signal transduction.

Regulated phosphorylation of proteins has been shown to be a hallmark of signal transduction mechanisms in both Eubacteria and Eukarya. Here we demonstrate that phosphorylation and dephosphorylation are also the underlying mechanism of chemo- and phototactic signal transduction in Archaea, the third branch of the living world. Cloning and sequencing of the region upstream of the cheA gene, known to be required for chemo- and phototaxis in Halobacterium salinarium, has identified cheY and cheB analogs which appear to form part of an operon which also includes cheA and the following open reading frame of 585 nucleotides. The CheY and CheB proteins have 31.3 and 37.5% sequence identity compared with the known signal transduction proteins CheY and CheB from Escherichia coli, respectively. The biochemical activities of both CheA and CheY were investigated following their expression in E.coli, isolation and renaturation. Wild-type CheA could be phosphorylated in a time-dependent manner in the presence of [gamma-32P]ATP and Mg2+, whereas the mutant CheA(H44Q) remained unlabeled. Phosphorylated CheA was dephosphorylated rapidly by the addition of wild-type CheY. The mutant CheY(D53A) had no effect on phosphorylated CheA. The mechanism of chemo- and phototactic signal transduction in the Archaeon H.salinarium, therefore, is similar to the two-component signaling system known from chemotaxis in the eubacterium E.coli.     

Asparaginyl-N-acetylgalactosamine. Linkage unit of halobacterial glycosaminoglycan

The cell surface glycoprotein of Halobacteria contains two different types of sulfated saccharides: hexuronic acid-containing oligosaccharides linked to the protein via asparaginylglucose, and a serially repeated saccharide unit containing amino sugars that resembles the animal glycosaminoglycans. Here we report that 1) the sulfated repeating unit saccharide is linked to the cell surface glycoprotein via asparaginyl-N-acetylgalactosamine, 2) the amino acid sequence surrounding this linkage region is -Asn-Ala-Ser-, and thus in agreement with the acceptor sequence ASN-X-Thr(Ser) common to all eucaryotic N-glycosidically bound saccharides determined so far; 3) in addition to galactose, galacturonic acid, N-acetylglucosamine, and N-acetylgalactosamine, the methylated hexuronic acid 3-O-methylgalacturonic acid occurs as a stoichiometric constituent of the sulfated building block of the glycosaminoglycan chain.     

Sequence analysis of the insertion element ISH1.8 and of associated structural changes in the genome of phage PhiH of the archaebacterium Halobacterium halobium

We have sequenced the insertion element ISH1.8 which can be present in one or two copies in the genome of phage ΦH of Halobacterium halobium. ISH1.8 is 1895 bp long, has no inverted repeat at its ends, and one only of the two copies is flanked by two 5-bp duplications. An 8-bp sequence composed of 4 bp from each end of ISH1.8 is present in both sites lacking the element. This 8-bp sequence could either be a specific insertion sequence or a part of the element that is left behind upon deletion. The plasmid pΦHL, consisting of the invertible L segment of the phage genome which is, in ΦH2 and ΦH5, flanked by two copies of ISH1.8, contains 112 bp of ISH1.8 and is released from the phage genome by recombination within a direct repeat of 9 bp. This 9-bp sequence (TCCCGCCCT) exists as an inverted repeat in ISH1.8 and therefore as two distinct repeats in phage genomes containing two copies of ISH1.8 in inverted orientation.     

Identification of a second endogenous Porphyromonas gingivalis insertion element.

In this study a second endogenous Porphyromonas gingivalis insertion element (IS element) that is capable of transposition within P. gingivalis was identified. Nucleotide sequence analysis of the Tn4351 insertion site in a P. gingivalis Tn4351-generated transconjugant showed that a complete copy of the previously unidentified IS element, designated PGIS2, had inserted into IS4351R in Tn4351. PGIS2 is 1,207 bp in length with 19-bp imperfect terminal inverted repeats, and insertion resulted in a duplicated 10-bp target sequence. Results of Southern hybridization of chromosomal DNA isolated from several P. gingivalis strains with a PGIS2-specific probe demonstrated that the number of copies of PGIS2 per genome varies among different P. gingivalis strains. Computer analysis of the putative polypeptide encoded by PGIS2 revealed strong homologies to the products encoded by IS1358 from Vibrio cholerae, ISAS1 from Aeromonas salmonicida, and H-rpt in Escherichia coli K-12.     

The insertion element IS1 is a natural constituent of coliphage P1 DNA.

The presence of one copy of the insertion element IS1 in P1 DNA at map unit 20 of the physical genome map is revealed by restriction enzyme cleavage patterns and electron microscopy. This IS1 element is cleaved once by the restriction endonuclease PstI and extends about 500 to 600 base pairs to the left and 200 to 300 base pairs to the right of the unique PstI cleavage site of P1 DNA. Two P1Cm derivatives, P1Cm246 and P1Cm89, carrying a chloramphenicol resistance determinant contain DNA insertions with two terminal directly repeated IS1 elements. Insertion of such IS1-mediated transposition elements may occur at the IS1 site in the P1 genome or at other sites. The significance of IS1 as a natural constitutent of P1 DNA is discussed.     

Molecular and genetic characterization of an Alcaligenes eutrophus insertion element.

An insertion element, ISAE1, was discovered during the molecular analysis of mutants defective in the autotrophic growth (Aut-) of Alcaligenes eutrophus H1-4, a mitomycin C-generated derivative of strain H1. ISAE1 is 1,313 bp long, has 12-bp nearly perfect inverted terminal repeats, and contains an open reading frame that has a coding capacity of 408 amino acids. Direct repeats of 8 bp were generated by insertion of ISAE1 into chromosomes or plasmids. Most insertion were found in the AT-rich target sites. The distribution of ISAE1 is limited to A. eutrophus H1 (ATCC 17698) and H16 (ATCC 17699). Variants with newly transposed copies of ISAE1 could be isolated at an elevated frequency by changing the growth conditions.     

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS 30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS 30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS 30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS 30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS 30 -like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS 3 , IS 6 and IS 21 , too.     

Complete nucleotide sequence of insertion element IS4351 from Bacteroides fragilis.

The nucleotide sequence and genetic analyses of one of the directly repeated sequences flanking the macrolide-lincosamide-streptogramin B drug resistance determinant, ermF, from the Bacteroides fragilis R plasmid, pBF4, suggested that this region is an insertion sequence (IS) element. This 1,155-base-pair element contained partially matched (20 of 25 base pairs) terminal-inverted repeats, overlapping, anti-parallel open reading frames, and nine promoterlike sequences, including three that were oriented outward. Analysis of this sequence revealed no significant nucleotide homology to 13 other known IS elements. Inasmuch as Southern blot hybridization analysis detected homologous sequences in chromosomal DNA and its G+C content (42 mol%) was similar to that of B. fragilis, the data suggested that this element is of Bacteroides origin. Transposition promoted by this element was demonstrated in recA E. coli. Recombinants were recovered by selecting for the activation of a promoterless chloramphenicol resistance gene on the plasmid pDH5110 and were characterized by restriction endonuclease mapping and Southern blot hybridization. We propose that this IS element be designated IS4351.     

ISH51: a large, degenerate family of insertion sequence-like elements in the genome of the archaebacterium, Halobacterium volcanii.

We describe a new family of repetitive elements in the genome of the archaebacterium Halobacterium volcanii. There are some 20-30 copies of this element, which we designate ISH51. Sequenced copies show typical insertion sequence characteristics (terminal inverted repeats, direct flanking repeats of "target site" DNA). However, members of the ISH51 family are highly heterogeneous, showing on average only 85% primary sequence homology; and some genomic copies appear to be severely truncated. Some ISH51 elements are clustered together in regions of relatively AT-rich DNA. There are at least five such AT-rich "islands" in the H. volcanii genome. Repetitive sequences homologous to ISH51 are found in the genomes of most Halobacterium and Halococcus species.     

A Coxiella burnetti repeated DNA element resembling a bacterial insertion sequence.

A DNA fragment located on the 3' side of the Coxiella burnetii htpAB operon was determined by Southern blotting to exist in approximately 19 copies in the Nine Mile I genome. The DNA sequences of this htpAB-associated repetitive element and two other independent copies were analyzed to determine the size and nature of the element. The three copies of the element were 1,450, 1,452, and 1,458 bp long, with less than 2% divergence among the three sequences. Several features characteristic of bacterial insertion sequences were discovered. These included a single significant open reading frame that would encode a 367-amino-acid polypeptide which was predicted to be highly basic, to have a DNA-binding helix-turn-helix motif, to have a leucine zipper motif, and to have homology to polypeptides found in several other bacterial insertion sequences. Identical 7-bp inverted repeats were found at the ends of all three copies of the element. However, duplications generated by many bacterial mobile elements in the recipient DNA during insertion events did not flank the inverted repeats of any of the three C. burnetii elements examined. A second pair of inverted repeats that flanked the open reading frame was also found in all three copies of the element. Most of the divergence among the three copies of the element occurred in the region between the two inverted repeat sequences in the 3' end of the element. Despite the sequence changes, all three copies of the element have retained significant dyad symmetry in this region.     

Freeze-drying allows double nonradioactive ISH and antigenic labeling.

Because tissue freeze-drying is an excellent way to preserve antigenic conformation, we have tested the feasibility of this technique to reveal nonradioactive in situ hybridization (ISH) of tissue mRNA. We have compared mRNA detection after different methods of tissue preservation, freeze-drying, cryosectioning, and formaldehyde or methanol fixation. Our results show that nonradioactive ISH is more sensitive for tissues preserved by freeze-drying than for other tissue preparations. We have demonstrated that freeze-drying allows combination of ISH and immunohistochemistry for simultaneous detection of mRNA and antigen because with this technique of tissue preservation ISH does not affect the sensitivity or the amount of the detected antigens. This work underscores the fact that tissue freeze-drying is an easy, convenient, and reliable technique for both ISH and immunohistochemistry and achieves excellent structural conditions for nonradioactive detection.     

The bz-rcy allele of the Cy transposable element system of Zea mays contains a Mu-like element insertion

Summary The receptive component of theCy transposable element system (rcy: Mu7) at theBz locus ofZea mays L. is 2.2 kb and has long terminal inverted repeats. The insertion is flanked by a 9 bp duplication. In the presence of an autonomousCy element in the genome,rcy: Mu7 is excised frombz-rcy in a manner consistent with a model suggested previously. The termini ofrcy: Mu7 have 85% sequence similarity with theMu1 element ofZ. mays. This is consistent with the observation thatMu1 can behave genetically like a receptive component of theCy system.     

Genome-wide analysis of mobile genetic element insertion sites

Mobile genetic elements (MGEs) account for a significant fraction of eukaryotic genomes and are implicated in altered gene expression and disease. We present an efficient computational protocol for MGE insertion site analysis. ELAN, the suite of tools described here uses standard techniques to identify different MGEs and their distribution on the genome. One component, DNASCANNER analyses known insertion sites of MGEs for the presence of signals that are based on a combination of local physical and chemical properties. ISF (insertion site finder) is a machine-learning tool that incorporates information derived from DNASCANNER. ISF permits classification of a given DNA sequence as a potential insertion site or not, using a support vector machine. We have studied the genomes of Homo sapiens, Mus musculus, Drosophila melanogaster and Entamoeba histolytica via a protocol whereby DNASCANNER is used to identify a common set of statistically important signals flanking the insertion sites in the various genomes. These are used in ISF for insertion site prediction, and the current accuracy of the tool is over 65%. We find similar signals at gene boundaries and splice sites. Together, these data are suggestive of a common insertion mechanism that operates in a variety of eukaryotes.     

A Mycoplasma genetic element resembling prokaryotic insertion sequences

Nucleotide sequence analysis of two Mycoplasma hyopneumoniae-derived copies of a repetitive genetic element revealed structural similarities to typical prokaryotic insertion sequences. This is the first such sequence identified in the class Mollicutes. The element spans approximately 1550bp, with 28bp inverted terminal repeats. Two open reading frames occur within the sequence, one potentially encoding a protein with a size-variant alpha-helical domain containing heptameric leucine periodicity. Hybridization data with several strains from each of two mycoplasma species showed that the repetitive sequence is variably distributed within the M. hyopneumoniae and Mycoplasma hyorhinis chromosomes and indicated that in some cases the repeated sequence is contained within a larger genetic element which may be the result of phage or plasmid insertion.