Production and characterization of biosurfactants from Bacillus licheniformis F2.2

A biosurfactant-producing strain, Bacillus licheniformis F2.2, was isolated from a fermented food in Thailand. The strain was capable of producing a new biosurfactant, BL1193, as well as two kinds of popular lipopeptide biosurfactants, plipastatin and surfactin. Mass spectrometry and FT-IR analysis indicated that BL1193 had a molecular mass of 1,193 Da with no peptide portion in the molecule. While plipastatin and surfactin were abundantly produced in a nutrient YPD medium, BL1193 was produced only in a synthetic DF medium containing no amino acids. According to an oil displacement activity test, the specific activity of BL1193 (6.53 kBS units/mg) is equivalent to that of surfactin (5.78-6.83 kBS units/mg).     

Evidence of surfactin hydrolysis by a bacterial endoprotease

The V8 endoprotease from Staphylococcus aureus hydrolyzes the cyclic lipopeptide, surfactin, at 100 M. The fragmentation lies between the two residues L-Glu1 and L-Leu2 leading to an open-chain lipopeptide. The structure of the product arising from the enzymic hydrolysis was established by chemical methods and mass spectrometry. The enzyme action has been suggested to be likely limited by the aggregation state of the lipopeptide in solution.     

Antifungal activity of the lipopeptides produced by Bacillus amyloliquefaciens anti-CA against Candida albicans isolated from clinic

The bacterium Bacillus amyloliquefaciens anti-CA isolated from mangrove system was found to be able to actively kill Candida albicans isolated from clinic. The bacterial strain anti-CA could produce high level of bioactive substance, amylase and protease in the cheap medium containing 2.0 % soybean meal, 2.0 % wheat flour, pH 6.5 within 26 h. After purification, the main bioactive substance was confirmed to be a cyclic lipopeptide containing a heptapeptide, L-Asp→L-Leu→L-Leu→L-Val→L-Val→L-Glu→L-Leu and a 3-OH fatty acid (15 carbons). In addition to C. albicans, the purified lipopeptide can also kill many yeast strains including Metschnikowia bicuspidata, Candida tropicalis, Yarrowia lipolytica and Saccharomyces cerevisiae. After treated by the purified lipopeptide, both the whole cells and protoplasts of C. albicans were destroyed.     

Isolation and structural analysis of bamylocin A, novel lipopeptide from Bacillus amyloliquefaciens LP03 having antagonistic and crude oil-emulsifying activity

Bacillus amyloliquefaciens strain LP03 isolated from soil, produced an antagonistic compound that strongly inhibited the growth of plant-pathogenic fungi and a lipopeptide biosurfactant. Also, isolated strain LP03 had a marked crude oil-emulsifying activity as it developed a clear zone around the colony after incubation for 24 h at 37°C. LP03 was identified as Bacillus amyloliquefaciens by analysis of partial 16 S rRNA gene and partial gyrA gene sequence. The lipopeptide was purified by acid precipitation of cell-free culture broth, extraction of the precipitates with methanol, silica gel column chromatography, and reverse-phase, high-pressure liquid chromatography. The purified biosurfactant was analyzed biochemical structure by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF) and electrospray ionization mass spectrometry/mass spectrometry (ESI-MS/MS). The masses of the two peaks were observed by HPLC chromatography. Their masses were determined to be 1,044 and 1,058 m/z with MALDI-TOF mass spectrometry. As constituents of the peptide and lipophilic part of the m/z 1,022.6, seven amino acids (Glu-Leu-Met-Leu-Pro-Leu-Leu) and β-hydroxy-C13 fatty acid were determined by ESI-MS/MS. The lipopeptide of 1,022.6 Da differed from surfactins in the substitution of leucine, valine and aspartic acid in positions 3, 4, and 5 by methionine, leucine, and proline, respectively. Novel lipopeptide was designated as bamylocin A.     

枯草芽孢杆菌B2菌株产生的表面活性素变异体的纯化和鉴定

利用6mol/L HCI沉淀枯草芽孢杆菌B2菌株的去细胞培养液,甲醇抽提获得脂肽类抗生素粗提物,过Sephadex LH-20层析柱获得粗纯化物,经MALDI-TOF-MS检测表明B2菌株仅含有表面活性素一种脂肽类抗生素。利用HPLC SMART SYSTEM,将粗纯化物过μPRC C2／C18层析柱对表面活性素变异体进行分离后获得纯化物。经MALDI-TOF-PSD—MS对纯化物的结构分析表明,B2菌株的表面活性素变异体由13、14和15个碳原子的脂肪酸链以及L-Glu-L-Leu—D—Leu—L-Val-L-Asp-D—Leu-L-Leu七环肽组成。     

Purification, characterization, cloning, and expression of a glutamic acid-specific protease from Bacillus licheniformis ATCC 14580.

A glutamic acid-specific protease has been purified to homogeneity from Bacillus licheniformis ATCC 14580 utilizing Phe-Leu-D-Glu-OMe-Sepharose affinity chromatography and crystallized. The molecular weight of the protease was estimated to be approximately 25,000 by SDS-polyacrylamide gel electrophoresis. This protease, which we propose to call BLase (glutamic acid-specific protease from B. licheniformis ATCC 14580), was characterized enzymatically. Using human parathyroid hormone (13-34) and p-nitroanilides of peptidyl glutamic acid and aspartic acid, we found a marked difference between BLase and V8 protease, EC 3.4.21.9, although both proteases showed higher reactivity for glutamyl bonds than for aspartyl bonds. Diisopropyl fluorophosphate and benzyloxycarbonyl Leu-Glu chloromethyl ketone completely inhibited BLase, whereas EDTA reversibly inactivated the enzyme. The findings clearly indicate that BLase can be classified as a serine protease. To elucidate the complete primary structure and precursor of BLase, its gene was cloned from the genomic DNA of B. licheniformis ATCC 14580, and the nucleotide sequence was determined. Taking the amino-terminal amino acid sequence of the purified BLase into consideration, the clones encode a mature peptide of 222 amino acids, which follows a prepropeptide of 94 residues. The recombinant BLase was expressed in Bacillus subtilis and purified to homogeneity. Its key physical and chemical characteristics were the same as those of the wild-type enzyme. BLase was confirmed to be a protease specific for glutamic acid, and the primary structure deduced from the cDNA sequence was found to be identical with that of a glutamic acid-specific endopeptidase isolated from Alcalase (Svendsen, I., and Breddam, K. (1992) Eur. J. Biochem. 204, 165-171), being different from V8 protease and the Glu-specific protease of Streptomyces griseus which consist of 268 and 188 amino acids, respectively.     

Purification and characterization of a lipopeptide produced by Bacillus thuringiensis CMB26

AIMS: To isolate an antagonist for use in the biological control of phytopathogenic fungi including Colletotrichum gloeosporioides, then to purify and characterize the biocontrol agent produced by the antagonist. METHODS AND RESULTS: Bacteria that exhibited antifungal activity against the causative agent pepper anthracnose were isolated from soil, with Bacillus thuringiensis CMB26 showing the strongest activity. A lipopeptide produced by B. thuringiensis CMB26 was precipitated by adjusting the pH 2 with 3 n HCl and extracted using chloroform/methanol (2:1, v/v) and reversed-phase HPLC. The molecular weight was estimated as 1447 Da by MALDI-TOF mass spectrometry. Scanning electron and optical microscopies showed that the lipopeptide has activity against Escherichia coli O157:ac88, larvae of the cabbage white butterfly (Pieris rapae crucivora) and phytopathogenic fungi. The lipopeptide had cyclic structure and the amino acid composition was L-Glu, D-Orn, L-Tyr, D-allo-Thr, D-Ala, D-Val, L-Pro, and L-Ile in a molar ratio of 3:1:2:1:1:2:1:1. The purified lipopeptide showed the same amino acid composition as fengycin, but differed slightly in fatty acid composition, in which the double bond was at carbons 13-14 (m/z 303, 316) and there was no methyl group. CONCLUSION: A lipopeptide was purified and characterized from B. thuringiensis CMB26 and found to be similar to the lipopeptide fengycin. This lipopeptide can function as a biocontrol agent, and exhibits fungicidal, bactericidal, and insecticidal activity. SIGNIFICANCE AND IMPACT OF THE STUDY: Compared with surfactin and iturin, the lipopeptide from B. thuringiensis CMB26 showed stronger antifungal activity against phytopathogenic fungi. This lipopeptide is a candidate for the biocontrol of pathogens in agriculture.     

原油污染土壤中生物表面活性剂菌株的筛选和产物鉴定

【目的】从原油污染的土壤中分离出产表面活性剂的枯草芽孢杆菌(Bacillus subtilis)SX-20,并对其产物进行提取及结构分析。【方法】采用氯化十六烷基吡啶和溴百里酚蓝混合溶液(cetylpyridinium chloride-bromothymol blue,CPC-BTB)显色反应结合血琼脂平板简单高效的筛选得到产脂肽的枯草芽孢杆菌。通过酸沉淀、甲醇萃取和旋转蒸发提取发酵所产生的粗产物,该产物对痤疮丙酸杆菌(Propionibacterium acnes)具有良好的抑制作用。运用傅里叶红光变换光谱(Fourier transform infrared spectroscopy,FTIR)、氨基酸分析和液相质谱联用(liquid chromatography-mass spectrometry,LC-MS)对粗产物的成分进行分析。【结果】筛选所得的菌株所产物质是含C15脂肪酸链和7个氨基酸形成的环状的脂肽表面活性剂。【结论】本研究为筛选脂肽类生物表面活性剂提供了一定的理论基础和技术路线,有利于后续获得高产的低成本的生物表面活性剂。     

Catechol siderophore, produced by thermoresistent strain of Bacillus licheniformis VK21

Thermophilic and thermoresistant strains of bacilli were screened on a medium containing Chrome Azurol S for producers of siderophores. It was found that the Bacillus licheniformis VK21 strain dramatically increases secretion of the metabolite, a chelator of Fe3+, in response to addition of manganese(II) salts. The growth of the producer on a minimum medium containing MnSO4 under the conditions of iron deficiency is accompanied by the accumulation of a catechol product, the content of which reaches a maximum at the beginning of the stationary growth phase of culture. In the presence of FeCl3, the amount of the catechol product in the medium considerably decreases. The siderophore, called SVK21, was isolated from the cultural medium and purified by reversed phase HPLC, and its siderophore function was confirmed by the test for the restoration of growth of producer cells in a medium containing EDTA. The UV spectrum of the siderophore has absorption maxima at 248 and 315 nm. According to amino acid analysis and NMR spectrometry, the metabolite SVK21 is 2,3-dihydroxybenzoyl-glycyl-threonine. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2003, vol. 29, no. 6; see also http://www.maik.ru.     

Structure activity relationships of stendomycin, a lipopeptide antibiotic from Streptomyces.

A strain of Streptomyces which produced stendomycin, a lipopeptide antibiotic, was grown in culture media containing various amino acids as nitrogen substrates. The nature of the fatty acid component of stendomycin was dependent on the nature of the amino acid present in the medium, but this did not affect antibiotic activity. Modifications in the peptide moiety resulted in a loss of antifungal activity.     

Characterization of a new lipopeptide surfactant produced by thermotolerant and halotolerant subsurface Bacillus licheniformis BAS50.

Strain BAS50, isolated from a petroleum reservoir at a depth of 1,500 m and identified as Bacillus licheniformis, grew and produced a lipopeptide surfactant when cultured on a variety of substrates at salinities of up to 13% NaCl. Surfactant production occurred both aerobically and anaerobically and was optimal at 5% NaCl and temperatures between 35 and 45 degrees C. The biosurfactant, termed lichenysin A, was purified and chemically characterized. A tentative structure and composition for the surfactant are described. Lichenysin A is a mixture of lipopeptides, with the major components ranging in size from 1,006 to 1,034 Da. The lipid moiety contains a mixture of 14 linear and branched beta-hydroxy fatty acids ranging in size from C12 to C17. There are seven amino acids per molecule. The peptide moiety is composed of the following amino acids: glutamic acid as the N-terminal amino acid, asparagine, valine, leucine, and isoleucine as the C-terminal amino acid, at a ratio of 1.1:1.1:1.0:2.8:1.0, respectively. Purified lichenysin A decreases the surface tension of water from 72 mN/m to 28 mN/m and achieves the critical micelle concentration with as little as 12 mg/liter, characterizing the product as a powerful surface-active agent that compares favorably to others surfactants. The antibacterial activity of lichenysin A has been demonstrated.     

Isolation,purification, and characterization of novel fengycin S from <Emphasis Type="Italic">Bacillus amyloliquefaciens</Emphasis> LSC04 degrading-crude oil

In this study, a biosurfactant-producing bacterial strain was isolated from oil-contaminated soil on the basis of its ability to degrade crude oil and tributyrin (C_4:0). LSC04 was identified as Bacillus amyloliquefaciens LSC04 via 16S rRNA gene analysis and partial gyrA gene sequence analysis. The biosurfactants were purified and structural analysis results showed that B. amyloliquefaciens LSC04 generated a lipopeptide biosurfactant. Two main ions of 1,086.9 and 1,491.2 were measured via matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The m/z 1,491.2 was shown to correspond to the lipopeptide fengycin B, but the m/z 1,086.9 ion did not correspond to any known lipopeptide. As constituents of the peptides and the lipophilic portion of the m/z 1,491.2; 10 amino acids (Ile-Tyr-Gln-Pro-Val-Glu-Ser-Tyr-Orn-Glu); and β-hydroxy-C17 fatty acid were identified via ESI-MS/MS. Structurally, the lipopeptide of a molecular mass of 1,491.2 differed from fengycin B and fengycin A by a substitution of serine for the threonine residue in position 4, and the amino acid residue in position 6 was equal to that of fengycin A. The major compound, which had a molecular mass of 1,491.2 Da was designated “Fengycin S”.     

The complete genome sequence of Bacillus licheniformis DSM13, an organism with great industrial potential

The genome of Bacillus licheniformis DSM13 consists of a single chromosome that has a size of 4,222,748 base pairs. The average G+C ratio is 46.2%. 4,286 open reading frames, 72 tRNA genes, 7 rRNA operons and 20 transposase genes were identified. The genome shows a marked co-linearity with Bacillus subtilis but contains defined inserted regions that can be identified at the sequence as well as at the functional level. B. licheniformis DSM13 has a well-conserved secretory system, no polyketide biosynthesis, but is able to form the lipopeptide lichenysin. From the further analysis of the genome sequence, we identified conserved regulatory DNA motives, the occurrence of the glyoxylate bypass and the presence of anaerobic ribonucleotide reductase explaining that B. licheniformis is able to grow on acetate and 2,3-butanediol as well as anaerobically on glucose. Many new genes of potential interest for biotechnological applications were found in B. licheniformis; candidates include proteases, pectate lyases, lipases and various polysaccharide degrading enzymes.     

Hyperinduction of nitrile hydratase acting on indole-3-acetonitrile in Agrobacterium tumefaciens

 We investigated the optimum conditions for the formation of nitrile hydratase (NHase), which acts on indole-3-acetonitrile, in Agrobacterium tumefaciens. Good inducers for enzyme formation have been found to be roughly classified into three representative types of amides such as pivalamide, crotonamide and ɛ-caprolactam. When the strain was cultivated in the optimum culture medium containing ɛ-caprolactam as an inducer, in particular, the specific activity of NHase in the culture was 13 000 times higher than that without addition of amides, nitriles or acids. In this case, NHase formed accounted for 12% of the total cellular soluble protein. The purified NHase did not act on ɛ-caprolactam, and ɛ-caprolactam was not degraded during the cultivation by the strain, suggesting that ɛ-caprolactam seems to keep driving the NHase induction mechanism. Received: 3 March 1995/Received revision: 13 July 1995/Accepted: 7 September 1995     

Structural and immunological characterization of a biosurfactant produced by Bacillus licheniformis JF-2.

Bacillus licheniformis JF-2 produces a very active biosurfactant under both aerobic and anaerobic conditions. We purified the surface-active compound to homogeneity by reverse-phase C18 high-performance liquid chromatography and showed that it is a lipopeptide with a molecular weight of 1,035. Amino acid analysis, fast atom mass and infrared spectroscopy, and, finally, 1H, 13C, and two-dimensional nuclear magnetic resonance demonstrated that the biosurfactant consists of a heterogeneous C15 fatty acid tail linked to a peptide moiety very similar to that of surfactin, a lipopeptide produced by Bacillus subtilis. Polyclonal antibodies were raised against surfactin and shown to exhibit identical reactivity towards purified JF-2 lipopeptide in competition enzyme-linked immunosorbent assays, thus providing further evidence for the structural similarity of these two compounds. Under optimal conditions, the B. licheniformis JF-2 biosurfactant exhibits a critical micelle concentration of 10 mg/liter and reduces the interfacial tension against decane to 6 x 10(-3) dyne/cm, which is one of the lowest interfacial tensions ever reported for a microbial surfactant.     

Variants of Lipopeptides Produced by <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> HSN221 in Different Medium Components Evaluated by a Rapid Method ESI-MS

A lipopeptide producing strain was isolated from an oil field and identified as Bacillus licheniformis HSN221. Nine different substrates were used to cultivate the strain under the same incubation conditions. Using a rapid method, Electrospray Ionization Mass Spectrometry (ESI-MS) combined with Thin Layer Chromatography (TLC), nine different lipopeptide homologues were found and identified. The strain produced four [Leu]surfactin homologues, surfactin C13, surfactin C14, surfactin C15 and surfactin C16, when cultivated in the medium with glucose, yeast extract and ammonium chloride, but it produced five lichenysin homologues, lichenysin C12, lichenysin C13, lichenysin C14, lichenysin C15 and lichenysin C16, when cultivated in the remaining eight media. Additionally, it showed that the type and relative content of each homologue were consistent with in each medium which is helpful for optimizing the medium components to cultivate the similar species.     

A novel extracellular cyclic lipopeptide which promotes flagellum-dependent and -independent spreading growth of Serratia marcescens.

Serrawettin W2, a surface-active exolipid produced by nonpigmented Serratia marcescens NS 25, was examined for its chemical structure and physiological functions. The chemical structure was determined by degradation analyses, infrared spectroscopy, mass spectrometry, and proton magnetic resonance spectroscopy. Serrawettin W2 was shown to be a novel cyclodepsipeptide containing a fatty acid (3-hydroxydecanoic acid) and five amino acids. The peptide was proposed to be D-leucine (N-bonded to the carboxylate of the fatty acid)-L-serine-L-threonine-D-phenylalanine-L-isoleucine (bonded to the 3-hydroxyl group). By examining the effects of isolated serrawettin W2 on serrawettinless mutants, this lipopeptide was shown to be active in the promotion of flagellum-independent spreading growth of the bacteria on a hard agar surface. The parent strain NS 25 formed a giant colony with a self-similar characteristic after incubation for a relatively long time (1 to 2 weeks), similar to other fractal colony-producing strains of S. marcescens (producers of the different serrawettins W1 and W3). On a semisolid medium that permitted flagellum-dependent spreading growth, an external supply of serrawettin W2 accelerated surface translocation of a serrawettinless mutant during a short period (12 h) of observation. In contrast, bacterial translocation in the subsurface space of the semisolid agar was not enhanced by serrawettins. Thus, the extracellular lipids seem to contribute specifically to the surface translocation of the bacteria by exhibiting surfactant activity.     

Structural characterization of lichenysin A components by fast atom bombardment tandem mass spectrometry.

The structural characterization of the cyclic lipoheptapeptide surfactant lichenysin A components, produced by Bacillus licheniformis strains via the non-ribosomal pathway on a corresponding peptide synthetase, was carried out using a tandem mass spectrometry (MS/MS) under fast atom bombardment (FAB) conditions. Based on the analysis of the collision-induced fragment-ion spectrum of the single charged molecular ions of both native and partially hydrolyzed forms of lipopeptide, a new general structure of lichenysin A components was elucidated. It varies from previously proposed structure by having in the peptide portion of lipopeptide the L-Gln-1 and L-Asp-5 residues instead of L-Glu-1 and L-Asn-5. The verified chemical structure of lichenysin A was found to be reflected in the structural organization of the corresponding lichenysin A synthetase, LchA, described recently.     

地衣芽孢杆菌2709碱性蛋白酶编码序列的PCR扩增、克隆及序列测定

在地衣芽孢杆菌NCIB 6816菌株碱性蛋白酶基因已知序列的基础上,通过设计合适的引物,利用PCR(Polymerase Chain Reaction)技术从地衣芽孢杆菌2709菌株的柒色体DNA中扩增了2709碱性蛋白酶的编码序列。对两个克隆的PCR片段的全序列分析结果显示,2709碱性蛋白酶的编码序列同相应的NCIB 6816序列相比有3％左右的碱基组成差异。由此推定的2709碱性蛋白酶的氨基酸序列肯定了2709碱性蛋白酶属典型的subtilisin Carlsberg类,同时还表明来源于不同地衣芽孢杆菌菌株的subtilisin Carlsberg存在着若干氨基酸组成上的差异。