Artefact reduction for cell migration visualization using spectral domain optical coherence tomography

Visualization of cell migration during chemotaxis using spectral domain optical coherence tomography (OCT) requires non‐standard processing techniques. Stripe artefacts and camera noise floor present in OCT data prevent detailed computer‐assisted reconstruction and quantification of cell locomotion. Furthermore, imaging artefacts lead to unreliable results in automated texture based cell analysis. Here we characterize three pronounced artefacts that become visible when imaging sample structures with high dynamic range, e.g. cultured cells: (i) time‐varying fixed‐pattern noise; (ii) stripe artefacts generated by background estimation using tomogram averaging; (iii) image modulations due to spectral shaping. We evaluate techniques to minimize the above mentioned artefacts using an 800 nm optical coherence microscope. Effect of artefact reduction is shown exemplarily on two cell cultures, i.e. Dictyostelium on nitrocellulose substrate, and retinal ganglion cells (RGC‐5) cultured on a glass coverslip. Retinal imaging also profits from the proposed processing techniques. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of three-dimensional culture and incubator gas concentration on phenotype and differentiation capability of human mesenchymal stem cells

To obtain sufficient numbers of cells for tissue engineering applications, human bone marrow-derived mesenchymal stem cells (hBM-MSC) are commonly cultured as monolayers in incubators containing room air. In this study, we investigated whether three-dimensional (3D) culture conditions and incubator gas concentrations more similar to those observed in vivo impacted on cell expansion, differentiation capability, or phenotype of hBM-MSC. We found that 3D culture alone increased the expression of some molecules involved in osteogenic and adipogenic differentiation. In contrast, 3D culture did not induce chondrogenic differentiation, but enhanced the response to the chondrogenic differentiation medium. Changing the oxygen concentration to 6% and the carbon dioxide concentration to 7.5% did not impact on the results of any of our assays, showing that the hyperoxia of room air is not detrimental to hBM-MSC proliferation, differentiation, or phenotype.     

Quantification of diabetic macular ischemia using novel three‐dimensional optical coherence tomography angiography metrics

We applied three‐dimensional (3D) analysis to optical coherence tomography angiography (OCTA) to measure macular ischemia in eyes affected by non‐proliferative diabetic retinopathy (DR). A previously validated algorithm was applied to OCTA data in order to obtain 3D visualization of the retinal vasculature. Successively, a global thresholding algorithm was applied and two novel quantitative metrics were introduced: 3D vascular volume and 3D perfusion density. Two‐dimensional (2D) OCTA metrics were also obtained with different binarization thresholds for comparison. Of the 30 patients included, 15 were diagnosed with DR and 15 were controls. The 3D vascular volume and 3D perfusion density were reduced in DR eyes (P < .0001). The 2D variables also significantly differ between groups. The 3D perfusion density had the highest area under the receiver operating characteristic curve (0.964) among tested variables. Assessing quantitative perfusion using 3D analysis is reliable and promising, and with an elevated diagnostic efficacy in identifying DR eyes.     

Frontal sinus ontogeny and covariation with bone structures in a modern human population

In humans, the frontal sinus (FS) is located in the medial part of the supraorbital region, sometimes expanded throughout the frontal squama. It exhibits high morphological variability, but its general form appears to be constrained by surrounding structures. The goal of this study is to analyze FS growth and test for covariation between FS volume and the glabellar region, upper nasal region, bone thickness and endocranial size in a human sample from Argentina. The sample comprises 149 reconstructions derived from computed tomography images of individuals aged 0–31 years. Volume of the FS and measurements of the surrounding structures were recorded. The FS growth trajectory was assessed by parametric and nonparametric methods, and covariation was determined using correlations and partial correlations. The FS volume could be measured at an age of about 6 years and older; adults had no aplasia but hyperplasia was found in some cases. Since the most conspicuous characteristic found was variation among individuals, the nonparametric smoothing spline produced very poor fitting. The modified logistic function was the only parametric method providing significant parameters. Sexes differed in the age at which FS growth began and ended, with FS developing earlier but at a slower rate in females than in males. The FS volume did not correlate with either upper nasal width or endocranial volume, but it correlated with bone thickness measurements (mainly from the glabellar region), even when age was held constant. Expansion of the FS at the frontal poles also correlated with frontal bone thickness. Despite the difficulty in modeling and predicting the trajectory and morphology of FS, our results suggest that it is affected by its surrounding bony environment.     

Perfusion enhanced polydimethylsiloxane based scaffold cell culturing system for multi‐well drug screening platform

Conventional two‐dimensional cultures in monolayer and sandwich configuration have been used as a model for in vitro drug testing. However, these culture configurations do not present the actual in vivo liver cytoarchitecture for the hepatocytes cultures and thus they may compromise the cells liver‐specific functions and their cuboidal morphology over longer term culture. In this study, we present a three‐dimensional polydimethylsiloxane (PDMS) scaffold with interconnected spherical macropores for the culturing of rat liver cells (hepatocytes). The scaffolds were integrated into our perfusion enhanced bioreactor to improve the nutrients and gas supply for cell cultures. The liver‐specific functions of the cell culture were assessed by their albumin and urea production, and the changes in the cell morphology were tracked by immunofluorescence staining over 9 days of culture period. N‐Acetyl‐Para‐Amino‐Phenol (acetaminophen) was used as drug model to investigate the response of cells to drug in our scaffold‐bioreactor system. Our experimental results revealed that the perfusion enhanced PDMS‐based scaffold system provides a more conducive microenvironment with better cell‐to‐cell contacts among the hepatocytes that maintains the culture specific enzymatic functions and their cuboidal morphology during the culturing period. The numerical simulation results further showed improved oxygen distribution within the culturing chamber with the scaffold providing an additional function of shielding the cell cultures from the potentially detrimental fluid induced shear stresses. In conclusion, this study could serve a crucial role as a platform for future preclinical hepatotoxicity testing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:418–428, 2014     

Representing and comparing protein folds and fold families using three‐dimensional shape‐density representations

The question of how best to compare and classify the (three‐dimensional) structures of proteins is one of the most important unsolved problems in computational biology. To help tackle this problem, we have developed a novel shape‐density superposition algorithm called 3D‐Blast which represents and superposes the shapes of protein backbone folds using the spherical polar Fourier correlation technique originally developed by us for protein docking. The utility of this approach is compared with several well‐known protein structure alignment algorithms using receiver‐operator‐characteristic plots of queries against the “gold standard” CATH database. Despite being completely independent of protein sequences and using no information about the internal geometry of proteins, our results from searching the CATH database show that 3D‐Blast is highly competitive compared to current state‐of‐the‐art protein structure alignment algorithms. A novel and potentially very useful feature of our approach is that it allows an average or “consensus” fold to be calculated easily for a given group of protein structures. We find that using consensus shapes to represent entire fold families also gives very good database query performance. We propose that using the notion of consensus fold shapes could provide a powerful new way to index existing protein structure databases, and that it offers an objective way to cluster and classify all of the currently known folds in the protein universe. Proteins 2012. © 2011 Wiley Periodicals, Inc.     

Structural basis of light chain amyloidogenicity: comparison of the thermodynamic properties, fibrillogenic potential and tertiary structural features of four Vlambda6 proteins

Primary (AL) amyloidosis results from the pathologic deposition of monoclonal light chains as amyloid fibrils. Studies of recombinant-derived variable region (VL) fragments of these proteins have shown an inverse relationship between thermodynamic stability and fibrillogenic potential. Further, ionic interactions within the VL domain were predicted to influence the kinetics of light chain fibrillogenicity, as evidenced from our analyses of a relatively stable Vlambda6 protein (Jto) with a long range electrostatic interaction between Asp and Arg side chains at position 29 and 68, respectively, and an unstable, highly fibrillogenic Vlambda6 protein (Wil) that had neutral amino acids at these locations. To test this hypothesis, we have generated two Jto-related mutants designed to disrupt the interaction between Asp 29 and Arg 68 (JtoD29A and JtoR68S). Although the thermodynamic stabilities of unfolding for these two molecules were identical, they exhibited very different kinetics of fibril formation: the rate of JtoD29A fibrillogenesis was slow and comparable to the parent molecule, whereas that of JtoR68S was significantly faster. High-resolution X-ray diffraction analyses of crystals prepared from the two mutants having the same space group and unit cell dimensions revealed no significant main-chain conformational changes. However, several notable side-chain alterations were observed in JtoR68S, as compared with JtoD29A, that resulted in the solvent exposure of a greater hydrophobic surface and modifications in the electrostatic potential surface. We posit that these differences contributed to the enhanced fibrillogenic potential of the Arg 68 mutant, since both Jto mutants lacked the intrachain ionic interaction and were equivalently unstable. The information gleaned from our studies has provided insight into structural parameters that in addition to overall thermodynamic stability, contribute to the fibril forming propensity of immunoglobulin light chains.     

Phenotypic characterization of Aspergillus niger and Candida albicans grown under simulated microgravity using a three-dimensional clinostat

The living and working environments of spacecraft become progressively contaminated by a number of microorganisms. A large number of microorganisms, including pathogenic microorganisms, some of which are fungi, have been found in the cabins of space stations. However, it is not known how the characteristics of microorganisms change in the space environment. To predict how a microgravity environment might affect fungi, and thus how their characteristics could change on board spacecraft, strains of the pathogenic fungi Aspergillus niger and Candida albicans were subjected to on-ground tests in a simulated microgravity environment produced by a three-dimensional (3D) clinostat. These fungi were incubated and cultured in a 3D clinostat in a simulated microgravity environment. No positive or negative differences in morphology, asexual reproductive capability, or susceptibility to antifungal agents were observed in cultures grown under simulated microgravity compared to those grown in normal earth gravity (1 G). These results strongly suggest that a microgravity environment, such as that on board spacecraft, allows growth of potentially pathogenic fungi that can contaminate the living environment for astronauts in spacecraft in the same way as they contaminate residential areas on earth. They also suggest that these organisms pose a similar risk of opportunistic infections or allergies in astronauts as they do in people with compromised immunity on the ground and that treatment of fungal infections in space could be the same as on earth.     

Oscillating perfusion of cell suspensions through three-dimensional scaffolds enhances cell seeding efficiency and uniformity

We developed a bioreactor for automated cell seeding of three-dimensional scaffolds by continuous perfusion of a cell suspension through the scaffold pores in oscillating directions. Using quantitative biochemical and image analysis techniques, we then evaluated the efficiency and uniformity of perfusion seeding of Polyactive foams as compared to conventional static and spinner flask methods. Finally, we assessed the efficacy of the perfusion seeding technique for different scaffolds and cell types. Perfusion seeding of chondrocytes into Polyactive foams resulted in "viable cell seeding efficiencies," defined as the percentages of initially loaded cells that were seeded and remained viable, that were significantly higher (75 +/- 6%) than those by static (57% +/- 5%) and spinner flask seeding (55% +/- 8%). In addition, as compared to static and spinner flask methods, cells seeded by perfusion were respectively 2.6-fold and 3.8-fold more uniformly distributed and formed more homogeneously sized cell clusters. Chondrocytes seeded by perfusion into Hyaff-11 nonwoven meshes were 26% and 63%, respectively, more uniformly distributed than following static and spinner flask seeding. Bone marrow stromal cells seeded by perfusion into ChronOS porous ceramics were homogeneously distributed throughout the scaffold volume, while following the static method, cells were found only near the top surface of the ceramic. In summary, we demonstrated that our cell seeding perfusion bioreactor generated constructs with remarkably uniform cell distributions at high efficiencies, and was effective for a variety of scaffolds and different mesenchymal cell types.     

Axial resolution enhancement of light‐sheet microscopy by double scanning of Bessel beam and its complementary beam

The side lobes of Bessel beam will create significant out‐of‐focus background when scanned in light‐sheet fluorescence microscopy (LSFM), limiting the axial resolution of the imaging system. Here, we propose to overcome this issue by scanning the sample twice with zeroth‐order Bessel beam and another type of propagation‐invariant beam, complementary to the zeroth‐order Bessel beam, which greatly reduces the out‐of‐focus background created in the first scan. The axial resolution can be improved from 1.68 μm of the Bessel light‐sheet to 1.07 μm by subtraction of the two scanned images across a whole field‐of‐view of up to 300 μm × 200 μm × 200 μm. The optimization procedure to create the complementary beam is described in detail and it is experimentally generated with a spatial light modulator. The imaging performance is validated experimentally with fluorescent beads as well as eGFP‐labeled mouse brain neurons.      

Spectrally encoded coherence tomography and reflectometry: Simultaneous en face and cross‐sectional imaging at 2 gigapixels per second

Non‐invasive biological imaging is crucial for understanding in vivo structure and function. Optical coherence tomography (OCT) and reflectance confocal microscopy are two of the most widely used optical modalities for exogenous contrast‐free, high‐resolution, three‐dimensional imaging in non‐fluorescent scattering tissues. However, sample motion remains a critical barrier to raster‐scanned acquisition and reconstruction of wide‐field anatomically accurate volumetric datasets. We introduce spectrally encoded coherence tomography and reflectometry (SECTR), a high‐speed, multimodality system for simultaneous OCT and spectrally encoded reflectance (SER) imaging. SECTR utilizes a robust system design consisting of shared optical relays, scanning mirrors, swept laser and digitizer to achieve the fastest reported in vivo multimodal imaging rate of 2 gigapixels per second. Our optical design and acquisition scheme enable spatiotemporally co‐registered acquisition of OCT cross‐sections simultaneously with en face SER images for multivolumetric mosaicking. Complementary axial and lateral translation and rotation are extracted from OCT and SER data, respectively, for full volumetric estimation of sample motion with micron spatial and millisecond temporal resolution.      

Magnetic resonance imaging, computed tomography, and conventional X-ray in 3 cases of symmelia

BACKGROUND: Symmelia is a rare birth defect, often combined with severe malformations of the urogenital system and the lower gastrointestinal tract. Additionally, a deformed pelvis and various degrees of separation of the lower limbs are present. CASES: We report the examination findings of 3 autopsy specimens of symmelia using magnetic resonance imaging (MRI) and computed tomography (CT) with 3-dimensional (3D) reconstructions, and conventional X-ray. CONCLUSIONS: MRI and CT with the addition of 3D visualization can be used additionally with autopsy and conventional X-ray images in the investigation of such complex anatomical abnormalities.     

Current state and perspectives in modeling and control of human pluripotent stem cell expansion processes in stirred‐tank bioreactors

Implementation of model‐based practices for process development, control, automation, standardization, and validation are important factors for therapeutic and industrial applications of human pluripotent stem cells. As robust cultivation strategies for pluripotent stem cell expansion and differentiation have yet to be determined, process development could be enhanced by application of mathematical models and advanced control systems to optimize growth conditions. Therefore, it is important to understand both the potential of possible applications and the apparent limitations of existing mathematical models to improve pluripotent stem cell cultivation technologies. In the present review, the authors focus on these issues as they apply to stem cell expansion processes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:355–364, 2017     

Three‐dimensional visualization system for ophthalmic microscopes using visible light and near‐infrared illumination

In this paper, we describe a three‐dimensional visualization system for ophthalmic microscopes that is aimed at microsurgery without the eyepieces. A three‐dimensional visualization system for ophthalmic microscopes using the mixed illumination, which consists of visible light and near‐infrared illumination, is established in order to acquire more exact information of object and reduce the amount of light irradiated to the patients, and its usage in microsurgery without eyepieces is herein described. A custom‐designed stereoscopic three‐dimensional display which is manufactured for the convenience of the surgeons during the long‐time surgery, is connected directly to the camera of the ophthalmic microscope in order to eliminate the discomfort of eyepieces to the surgeon and signal delay between the camera, mounted on the microscope, and display device for surgeon. The main features of the established system are the signal delay‐free for surgeon and the low level of illumination for patient. In particular, it could significantly reduce the amount of light irradiated on a patient's eye via NIR illumination. Upon comparison with the conventional system during clinical ophthalmology trials, this system is confirmed to require almost the same operation time and reduced discomfort and eyestrain during long periods of observation.      

Front Cover: Spectrally encoded coherence tomography and reflectometry: Simultaneous en face and cross‐sectional imaging at 2 gigapixels per second (J. Biophotonics 4/2018)

SECTR is a novel multimodal imaging platform for combined volumetric optical coherence tomography (OCT) and en face spectrally encoded reflectometry (SER). The authors demonstrate three‐dimensional motion‐tracking with millisecond temporal and micron spatial resolution using complementary data from OCT and SER, and preliminary algorithms and results showing real‐time image aiming and multi‐volumetric mosaicking for reconstruction of wide‐field composites. The image shows a noninvasively imaged nine‐field mosaic of in vivo human retina and depth‐resolved visualization of tissue microstructures. Further details can be found in the article by Mohamed T. El‐Haddad, Ivan Bozic, and Yuankai K. Tao ( e201700268 )

     

3D morphological and biophysical changes in a single tachyzoite and its infected cells using three‐dimensional quantitative phase imaging

Toxoplasma gondii is an apicomplexan parasite that causes toxoplasmosis in the human body and commonly infects warm‐blooded organisms. Pathophysiology of its diseases is still an interesting issue to be studied since T gondii can infect nearly all nucleated cells. Imaging techniques are crucial for studying its pathophysiology. In T gondii‐infected cells structural and biochemical alterations occurred. To study that modification, we use digital holotomography to investigate the structure and biochemical alteration of single tachyzoite and its infected cells in a label‐free and quantitative manner. Quantification analysis was done by measuring the refractive index distribution, which provides information about the concentration and dry mass of individual cells. This study showed that holotomography could be effectively used to identify the structural and biochemical alteration in tremendously different cells in supporting pathophysiological research in particular for T gondii‐caused diseases.     

Comparison of pulsed photothermal radiometry,optical coherence tomography and ultrasound for melanoma thickness measurement in PDMS tissue phantoms

Melanoma accounts for 75% of all skin cancer deaths. Pulsed photothermal radiometry (PPTR), optical coherence tomography (OCT) and ultrasound (US) are non‐invasive imaging techniques that may be used to measure melanoma thickness, thus, determining surgical margins. We constructed a series of PDMS tissue phantoms simulating melanomas of different thicknesses. PPTR, OCT and US measurements were recorded from PDMS tissue phantoms and results were compared in terms of axial imaging range, axial resolution and imaging time. A Monte Carlo simulation and three‐dimensional heat transfer model was constructed to simulate PPTR measurement. Experimental results show that PPTR and US can provide a wide axial imaging range (75 μm–1.7 mm and 120–910 μm respectively) but poor axial resolution (75 and 120 μm respectively) in PDMS tissue phantoms, while OCT has the most superficial axial imaging range (14–450 μm) but highest axial resolution (14 μm). The Monte Carlo simulation and three‐dimensional heat transfer model give good agreement with PPTR measurement. PPTR and US are suited to measure thicker melanoma lesions (<$>><$>400 μm), while OCT is better to measure thin melanoma lesions (<$><<$>400 μm). (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)