Atomic force microscopy of DNA molecules.

DNA-cytochrome c complexes adsorbed on carbon-coated mica surfaces were directly imaged by atomic force microscopy in air using commercially available cantilevers, with a routine resolution of 6 nm. Images of M13 phage DNA and M13-DNA polymerase complex are also shown.     

Atomic force microscopy of DNA in aqueous solutions.

DNA on mica can be imaged in the atomic force microscope (AFM) in water or in some buffers if the sample has first been dehydrated thoroughly with propanol or by baking in vacuum and if the sample is imaged with a tip that has been deposited in the scanning electron microscope (SEM). Without adequate dehydration or with an unmodified tip, the DNA is scraped off the substrate by AFM-imaging in aqueous solutions. The measured heights and widths of DNA are larger in aqueous solutions than in propanol. The measured lengths of DNA molecules are the same in propanol and in aqueous solutions and correspond to the base spacing for B-DNA, the hydrated form of DNA; when the DNA is again imaged in propanol after buffer, however, it shortens to the length expected for dehydrated A-DNA. Other results include the imaging of E. coli RNA polymerase bound to DNA in a propanol-water mixture and the observation that washing samples in the AFM is an effective way of disaggregating salt-DNA complexes. The ability to image DNA in aqueous solutions has potential applications for observing processes involving DNA in the AFM.     

Atomic force microscopy of single- and double-stranded DNA.

A method has been developed for imaging single-stranded DNA with the atomic force microscope (AFM). phi X174 single-stranded DNA in formaldehyde on mica can be imaged in the AFM under propanol or butanol or in air. Measured lengths of most molecules are on the order of 1 mu, although occasionally more extended molecules with lengths of 1.7 to 1.9 mu are seen. Single-stranded DNA in the AFM generally appears lumpier than double-stranded DNA, even when extended. Images of double-stranded lambda DNA in the AFM show more sharp kinks and bends than are typically observed in the electron microscope. Dense, aggregated fields of double-stranded plasmids can be converted by gentle rinsing with hot water to well spread fields.     

Atomic force microscopy detects changes in the interaction forces between GroEL and substrate proteins.

The structure of the Escherichia coli chaperonin GroEL has been investigated by tapping-mode atomic force microscopy (AFM) under liquid. High-resolution images can be obtained, which show the up-right position of GroEL adsorbed on mica with the substrate-binding site on top. Because of this orientation, the interaction between GroEL and two substrate proteins, citrate synthase from Saccharomyces cerevisiae with a destabilizing Gly-->Ala mutation and RTEM beta-lactamase from Escherichia coli with two Cys-->Ala mutations, could be studied by force spectroscopy under different conditions. The results show that the interaction force decreases in the presence of ATP (but not of ATPgammaS) and that the force is smaller for native-like proteins than for the fully denatured ones. It also demonstrates that the interaction energy with GroEL increases with increasing molecular weight. By measuring the interaction force changes between the chaperonin and the two different substrate proteins, we could specifically detect GroEL conformational changes upon nucleotide binding.     

Atomic force microscopy imaging of double stranded DNA and RNA.

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Atomic force microscopy of cotton fiber cell wall surfaces in air and water: quantitative and qualitative aspects

Cotton (Gossypium hirsutum cv. MD51) fiber cell walls were analyzed with an atomic force microscope to determine the effect of chemical treatments on cell wall organization and topography. Analysis of fibers in either air or water and without any staining or coating produced high-resolution images of cell wall microstructure which could be used for detailed quantitative analysis. Treatment of fibers with 1% H₂O₂ had little effect on surface morphology. Alkali removed much of the cuticle, some primary wall components, and revealed mostly thin-diameter microfibrils. Acidic Updegraff reagent fragmented the fibers, removed much of the cuticle, and revealed mostly thick microfibrils. The surface roughness of fibers treated sequentially with alkali and acid was quantitatively distinguishable from all other fiber types based on the standard deviation of the height data, amplification of surface area, and integration of the scan line data. Analysis of the fractal dimension enabled untreated and peroxide-treated fibers to be clearly distinguished from the other fiber types. Segmentation of the fractal data revealed specific portions of the fractal dimension which were especially useful for defining the size of structures that differentiated fiber types. Areas containing microfibrils could be quantitatively differentiated from non-microfibrillar areas. In water, some alkali-treated fibers had microfibrils that were relatively small in diameter while others appeared to consist of crystalline arrays of smaller fibrils. Received: 10 December 1996 / Accepted: 29 January 1997     

Single integrin molecule adhesion forces in intact cells measured by atomic force microscopy.

Cross-talk between cells and the extracellular matrix is critically influenced by the mechanical properties of cell surface receptor-ligand interactions; these interactions are especially well defined and regulated in cells capable of dynamically modifying their matrix environment. In this study, attention was focused on osteoclasts, which are absolutely dependent on integrin extracellular matrix receptors in order to degrade bone; other bone cells, osteoblasts, were used for comparison. Integrin binding forces were measured in intact cells by atomic force microscopy (AFM) for several RGD-containing (Arg-Gly-Asp) ligands and ranged from 32 to 97 picoNewtons (pN); they were found to be cell and amino acid sequence specific, saturatable and sensitive to the pH and divalent cation composition of the cellular culture medium. In contrast to short linear RGD hexapeptides, larger peptides and proteins containing the RGD sequence, such as osteopontin (a major non-collagenous bone protein) and echistatin (a high affinity RGD sequence containing antagonist snake venom protein), showed different binding affinities. This demonstrates that the context of the RGD sequence within a protein has considerable influence upon the final binding force for receptor interaction. These data also demonstrate that AFM, as a methodological approach, can be adapted to cell biology studies wherever cell-matrix interactions play a critical role, and, moreover, may have applicability to the analysis of receptor-ligand interactions in cell membranes in general.     

Atomic force microscopy in biology: technology and techniques.

In this review, I describe the biological applications of the atomic force microscope (AFM). The historical background and the development of the microscope are described. The AFM can operate in many different modes relevant to biological systems including topography, chemical analysis, and forces relevant at the biological length scale (single cell to DNA dimensions and pico to nano Newton forces). A limited number of examples from the literature are described to illustrate some of the many capabilities of this microscope. The aim is to give an introduction of the technique to the inexperienced in this rapidly growing field.     

Circular DNA molecules imaged in air by scanning force microscopy.

Routine and reproducible imaging of DNA molecules in air with the scanning force microscope (SFM) has been accomplished. Circular molecules of plasmid DNA were deposited onto red mica and imaged under various relative humidities. In related experiments, the first images of the Escherichia coli RNA polymerase-DNA complex have also been obtained. This has been possible by (1) the use of specially modified SFM tips with a consistent radius of curvature of 10 nm or less, to minimize the amount of image distortion introduced by the finite dimensions of commercially available tips, (2) the optimization of a method to deposit and bind DNA molecules to the mica surface in a stable fashion, and (3) careful control of the sample humidity, to prevent solvation of the molecules and detachment from the surface by the scanning tip or stylus. Contact forces in the range of a few nanonewtons are routinely possible in air and in the presence of residual humidity. The spatial resolution of the images appears determined by the radius of curvature of the modified styli, which can be estimated directly from the apparent widths of the DNA molecules in the images.     

Atomic force microscopy of the myosin molecule.

Atomic force microscopy (AFM) has been used to study the structure of rabbit skeletal muscle myosin deposited onto a mica substrate from glycerol solution. Images of the myosin molecule have been obtained using contact mode AFM with the sample immersed in propanol. The molecules have two heads at one end of a long tail and have an appearance similar to those prepared by glycerol deposition techniques for electron microscopy, except that the separation of the two heads is not so well defined. The average length of the tail (155 +/- 5 nm) agrees well with previous studies. Bends in the myosin tail have been observed at locations similar to those observed in the electron microscope. By raising the applied force, it has been possible locally to separate the two strands of the alpha-helical coiled-coil tail. We conclude that the glycerol-mica technique is a useful tool for the preparation of fibrous proteins for examination by scanning probe microscopy.     

Atomic force microscopy and chemical force microscopy of microbial cells

Over the past years, atomic force microscopy (AFM) has emerged as a powerful tool for imaging the surface of microbial cells with nanometer resolution, and under physiological conditions. Moreover, chemical force microscopy (CFM) and single-molecule force spectroscopy have enabled researchers to map chemical groups and receptors on cell surfaces, providing valuable insight into their structure-function relationships. Here, we present protocols for analyzing spores of the pathogen Aspergillus fumigatus using real-time AFM imaging and CFM. We emphasize the use of porous polymer membranes for immobilizing single live cells, and the modification of gold-coated tips with alkanethiols for CFM measurements. We also discuss recording conditions and data interpretation, and provide recommendations for reliable experiments. For well-trained AFM users, the entire protocol can be completed in 2-3 d.     

Atomic force microscopy study of DNA conformation in the presence of drugs

Binding of ligands to DNA gives rise to several relevant biological and biomedical effects. Here, through the use of atomic force microscopy (AFM), we studied the consequences of drug binding on the morphology of single DNA molecules. In particular, we quantitatively analyzed the effects of three different DNA-binding molecules (doxorubicin, ethidium bromide, and netropsin) that exert various pharmacologic and therapeutic effects. The results of this study show the consequences of intercalation and groove molecular binding on DNA conformation. These single-molecule measurements demonstrate morphological features that reflect the specific modes of drug–DNA interaction. This experimental approach may have implications in the design of therapeutically effective agents.     

Atomic force microscopy of macromolecular interactions.

The introduction of functional imaging tools and techniques that operate at molecular-length scales has provided investigators with unique approaches to characterizing biomolecular structure and function relationships. Recent advances in the field of scanning probe techniques and, in particular, atomic force microscopy have yielded tantalizing insights into the dynamics of protein self-assembly and the mechanics of protein unfolding.     

Atomic force microscopy captures the initiation of methyl-directed DNA mismatch repair

In Escherichia coli, errors in newly-replicated DNA, such as the incorporation of a nucleotide with a mis-paired base or an accidental insertion or deletion of nucleotides, are corrected by a methyl-directed mismatch repair (MMR) pathway. While the enzymology of MMR has long been established, many fundamental aspects of its mechanisms remain elusive, such as the structures, compositions, and orientations of complexes of MutS, MutL, and MutH as they initiate repair. Using atomic force microscopy, we—for the first time—record the structures and locations of individual complexes of MutS, MutL and MutH bound to DNA molecules during the initial stages of mismatch repair. This technique reveals a number of striking and unexpected structures, such as the growth and disassembly of large multimeric complexes at mismatched sites, complexes of MutS and MutL anchoring latent MutH onto hemi-methylated d(GATC) sites or bound themselves at nicks in the DNA, and complexes directly bridging mismatched and hemi-methylated d(GATC) sites by looping the DNA. The observations from these single-molecule studies provide new opportunities to resolve some of the long-standing controversies in the field and underscore the dynamic heterogeneity and versatility of MutSLH complexes in the repair process.     

Quantification of bacterial adhesion forces using atomic force microscopy (AFM)

This study demonstrated that atomic force microscopy (AFM) can be used to obtain high-resolution topographical images of bacteria, and to quantify the tip-cell interaction force and the surface elasticity. Results show that the adhesion force between the Si3N4 tip and the bacteria surface was in the range from -3.9 to -4.3 nN. On the other hand, the adhesion forces at the periphery of the cell-substratum contact surface ranged from -5.1 to -5.9 nN and those at the cell-cell interface ranged from -6.5 to -6.8 nN. The two latter forces were considerably greater than the former one, most likely due to the accumulation of extracellular polymer substance (EPS). Results also show that the elasticity varied on the cell surface.     

Atomic force microscopy imaging of DNA under macromolecular crowding conditions

Studying the influence of macromolecular crowding at high ionic strengths on assemblies of biomolecules is of particular interest because these are standard intracellular conditions. However, up to now, no techniques offer the possibility of studying the effect of molecular crowding at the single molecule scale and at high resolution. We present a method to observe double-strand DNA under macromolecular crowding conditions on a flat mica surface by atomic force microscope. By using high concentrations of monovalent salt ([NaCl] > 100 mM), we promote DNA adsorption onto NiCl 2 pretreated muscovite mica. It therefore allows analysis of DNA conformational changes and DNA compaction induced by polyethylene glycol (PEG), a neutral crowding agent, at physiological concentrations of monovalent salt.     

Atomic force microscopy of DNA molecules stretched by spin-coating technique

We have developed an effective approach to stretching DNA molecules with the flow of fluid generated by spin coating. Well-stretched A DNA molecules were observed using atomic force microscopy. Substrate properties sensitively affected the stretching behavior of DNA. Our experimental findings revealed that a mica surface treated with crystal violet, a cationic dye molecule, is suitable to the spin-coating procedure for stretching DNA. Moreover, compared with relaxed DNA, we observed reduced height of the stretched DNA, which was attributed mainly to elongation force applied to the DNA molecules from the fluid flow and strong adhesion force between DNA and the substrate. This simple and effective method for preparing stretched DNA could be useful in physically mapping genomic DNA in a high throughput.     

Atomic force microscopy analysis of intermediates in cobalt hexammine-induced DNA condensation

The packaging pathway of cobalt hexammine-induced DNA condensation on the surface of mica was examined by varying the concentration of Co(NH3)6(3+) in a dilute DNA solution and visualizing the condensates by atomic force microscopy (AFM). Images reveal that cobalt hexammine-induced DNA condensation on mica involves well-defined structures. At 30 microM Co(NH3)6(3+), prolate ellipsoid condensates composed of relatively shorter rods with linkages between them are formed. At 80 microM Co(NH3)6(3+), the condensed features include toroids with average diameter of approximately 240 nm as well as U-shaped and rod-like condensates with nodular appearances. The results imply that the condensates, whether toroids, U-shaped or rod-like structures have similar intermediate state which includes relatively shorter rod-like segments. The average size of the condensed toroids after incubated at room temperature for 5 h (approximately 240 nm) is much larger than that incubated for 0.5 h (approximately 100 nm). The results indicate that the condensation of DNA by Co(NH3)6(3+) is a kinetic-controlled process.     

Imaging soft samples with the atomic force microscope: gelatin in water and propanol.

We have imaged mica coated with thin gelatin films in water, propanol, and mixtures of these two liquids by atomic force microscopy (AFM). The elastic modulus (Young's modulus) can be tuned from 20 kPa to more than 0.1 GPa depending on the ratio of propanol to water. The resolution is best in pure propanol, on the order of 20 nm, and becomes worse for the softer samples. The degradation in resolution can be understood by considering the elastic indentation of the gelatin caused by the AFM tip. This indentation becomes larger and thus the contact area becomes larger the softer the sample is. Therefore this study may be used to estimate the resolution to be expected with an AFM on other soft samples, such as cells. Nondestructive imaging was possible only by imaging at forces < 1 nN. This was difficult to achieve in contact mode because of drift in the zero load deflection of the cantilever, supposedly caused by temperature drift, but straightforward in tapping mode.