Polymerization and matrix physical properties as important design considerations for soluble collagen formulations

Despite extensive use of type I collagen for research and medical applications, its fibril‐forming or polymerization potential has yet to be fully defined and exploited. Here, we describe a type I collagen formulation that is acid solubilized from porcine skin collagen (PSC), quality controlled based upon polymerization potential, and well suited as a platform polymer for preparing three‐dimensional (3D) culture systems and injectable/implantable in vivo cellular microenvironments in which both relevant biochemical and biophysical parameters can be precision‐controlled. PSC is compared with three commercial collagens in terms of composition and purity as well as polymerization potential, which is described by kinetic parameters and fibril microstructure and mechanical properties of formed matrices. When subjected to identical polymerization conditions, PSC showed significantly decreased polymerization times compared to the other collagens and yielded matrices with the greatest mechanical integrity and broadest range of mechanical properties as characterized in oscillatory shear, uniaxial extension, and unconfined compression. Compositional and intrinsic viscosity analyses suggest that the enhanced polymerization potential of PSC may be attributed to its unique oligomer composition. Collectively, this work demonstrates the importance of standardizing next generation collagen formulations based upon polymerization potential and provides preliminary insight into the contribution of oligomers to collagen polymerization properties. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 690–707, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Gel formation and low-temperature intramolecular conformation transition of a triple-helical polysaccharide lentinan in water

The gelation behavior of the triple-helical polysaccharide lentinan fractions having different molecular weights in water at 25 degrees C were studied by using a rheometer. The analysis of concentration and molecular weight dependence of shear stress and shear viscosity showed that aqueous lentinan is a typical shear-thinning fluid, possessing potential as a viscosity control agent, and that a weak gel with entangled network structure formed. The dynamic oscillatory behavior of lentinan in the temperature range of 1-15 degrees C was also investigated by rheologic method. The storage modulus G' and complex viscosity eta* increased first with decreasing temperature, and underwent a maximum centered at 7-9 degrees C, and then decreased with further decreasing temperature. This abnormal phenomenon was ascribed to formation of rigid structure in the gel state, which was confirmed by the experimental results from micro-DSC. The micro-DSC curves showed that an endothermic peak appeared at 7-9 degrees C for lentinan in water upon heating, which was attributable to the intramolecular order-disorder structure transition similar to triple-helical polysaccharide schizophyllan. Namely, at lower temperature, the side glucose residues of lentinan (triplix II) formed a well-organized triple-helical structure (triplix I) through hydrogen-bonding with the surrounding water molecules. Moreover, this conformation transition was proved to be thermally reversible. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 852-861, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Self-assembling peptides: sequence, secondary structure in solution and film formation

Peptides of alternating charge and hydrophobic amino acids have a tendency to adopt unusually stable beta-sheet structures that can form insoluble macroscopic aggregates under physiological conditions. In this study, analogues of a well-known self-assembling peptide, characterized by the same polar/nonpolar periodicity but with different residues, were designed to study the relationship between sequence, conformation in solution and film-forming capacity in saline solution. Peptide conformation, evaluated by circular dichroism, correlated with film forming capacity observed by inverted optical microscopy after addition of saline solution and subsequent drying. We found that polar/nonpolar periodicity of several analogues is not criterion enough to induce beta-sheet and thus film formation and that conformations different from beta-sheet also allow self-assemblage. Furthermore, addition of the short adhesive sequence RGD to a known self-assembling sequence was shown to not prevent the self-assembling process. This finding might prove useful for the design of biomimetic scaffolds. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 906-915, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

β‐Sheet aggregation of kisspeptin‐10 is stimulated by heparin but inhibited by amphiphiles

The murine 10‐residue neurohormone kisspeptin (YNWNSFGLRY) is an important regulator of reproductive behavior and gonadotrophin secretion. It is known to form a random coil in solution, but undergoes a structural change in the presence of membranes although the nature of this change is not fully determined. The peptide's conformational versatility raises the question whether it is also able to form ordered aggregates under physiological conditions, which might be relevant as a storage mechanism. Here we show that heparin induces kisspeptin to form β‐sheet rich amyloid aggregates both at neutral (pH 7.0) and slightly acidic (pH 5.2) conditions. Addition of heparin leads to aggregation after a certain lag phase, irrespective of the time of addition of heparin, indicating that heparin is needed to facilitate the formation of fibrillation nuclei. Aggregation is completely inhibited by submicellar concentrations of zwitterionic and anionic surfactants. Unlike previous reports, our NMR data do not indicate persistent structure in the presence of zwitterionic surfactant micelles. Thus kisspeptin can aggregate under physiologically relevant conditions provided heparin is present, but the process is highly sensitive to the presence of amphiphiles, highlighting the very dynamic nature of the peptide conformation and suggesting that kisspeptin aggregation is a biologically regulatable process. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 678–689, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Electrostatic interactions with histone tails may bend linker DNA in chromatin

Is linker DNA bent in the 30‐nm chromatin fiber at physiological conditions? We show here that electrostatic interactions between linker DNA and histone tails including salt condensation and release may bend linker DNA, thus affecting the higher order organization of chromatin. © 2005 Wiley Periodicals, Inc. Biopolymers 81: 20–28, 2006 This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Thermodynamically controlled supramolecular polymerization of cytochrome b562

A hemoprotein‐based supramolecular polymer that has a covalently linked heme moiety on the protein surface has been constructed based on interprotein heme–heme pocket interactions of the chemically modified apocytochrome b₅₆₂ ( 1 ‐H63C). The thermodynamic properties of the polymer have been investigated by means of size exclusion chromatography, UV–vis spectroscopy, and circular dichroism spectroscopy. The results indicate that, as with other synthetic systems reported so far, the 1 ‐H63C hemoprotein assembly is thermodynamically controlled in aqueous solution: the degree of polymerization is dependent on the 1 ‐H63C concentration and is modulated by the addition of the end‐capping units, native heme, and/or apocytochrome b₅₆₂ mutant (apoH63C). These properties suggest a potential use for the hemoprotein self‐assembly in preparation of stimuli‐responsive functional nanobiomaterials. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 194–200, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Ultrastructure of ulvan: A polysaccharide from green seaweeds

Ultrastructural analysis of the gel forming green seaweed sulfated polysaccharide ulvan revealed a spherical‐based morphology (10–18 nm diameter) more or less aggregated in aqueous solution. At pH 13 in TBAOH (tetrabutyl ammonium hydroxyde) or NaOH, ulvan formed an open gel‐like structure or a continuous film by fusion or coalescence of bead‐like structures, while in acidic pH conditions, ulvan appeared as dispersed beads. Low concentrations of sodium chloride, copper or boric acid induced the formation of aggregates. These results highlight the hydrophobic and aggregative behavior of ulvan that are discussed in regard to the peculiar gel formation and the low intrinsic viscosity of the polysaccharide in aqueous solution. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 652–664, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Collagen oligomers modulate physical and biological properties of three‐dimensional self‐assembled matrices

Elucidation of mechanisms underlying collagen fibril assembly and matrix‐induced guidance of cell fate will contribute to the design and expanded use of this biopolymer for research and clinical applications. Here, we define how Type I collagen oligomers affect in‐vitro polymerization kinetics as well as fibril microstructure and mechanical properties of formed matrices. Monomers and oligomers were fractionated from acid‐solubilized pig skin collagen and used to generate formulations varying in monomer/oligomer content or average polymer molecular weight (AMW). Polymerization half‐times decreased with increasing collagen AMW and closely paralleled lag times, indicating that oligomers effectively served as nucleation sites. Furthermore, increasing AMW yielded matrices with increased interfibril branching and had no correlative effect on fibril density or diameter. These microstructure changes increased the stiffness of matrices as evidenced by increases in both shear storage and compressive moduli. Finally, the biological relevance of modulating collagen AMW was evidenced by the ability of cultured endothelial colony forming cells to sense associated changes in matrix physical properties and alter vacuole and capillary‐like network formation. This work documents the importance of oligomers as another physiologically‐relevant design parameter for development and standardization of polymerizable collagen formulations to be used for cell culture, regenerative medicine, and engineered tissue applications. © 2010 Wiley Periodicals, Inc. Biopolymers 95: 77–93, 2011.     

Changes in the quaternary structure of amelogenin when adsorbed onto surfaces

Amelogenin is a unique protein that self‐assembles into spherical aggregates called “nanospheres” and is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin onto substrates is of great interest because protein‐surface interactions are critical to its function. We report studies of the adsorption of amelogenin onto self‐assembled monolayers containing COOH end group functionality as well as single crystal fluoroapatite, a biologically relevant surface. We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as dimers or trimers were observed on the hydrophilic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that “shed” or disassemble from the nanospheres that are present in solution. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 103–107, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Hot-spot residues at the E9/Im9 interface help binding via different mechanisms

Protein-protein association involves many interface interactions, but they do not contribute equally. Ala scanning experiments reveal that only a few mutations significantly lower binding affinity. These key residues, which appear to drive protein-protein association, are called hot-spot residues. Molecular dynamics simulations of the Colicin E9/Im9 complex show Im9 Glu41 and Im9 Ser50, both hot-spots, bind via different mechanisms. The results suggest that Im9 Ser50 restricts Glu41 in a conformation auspicious for salt-bridge formation across the interface. This type of model may be helpful in engineering hot-spot clusters at protein-protein interfaces and, consequently, the design of specificity. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 916-920, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

The molecular structure and physical properties of elastin fibers as revealed by Raman microspectroscopy

Raman microspectroscopy has been used to investigate the structure of alpha-elastin and fibrous elastin from ligament and aorta, and to explore changes associated with mechanical strain and temperature. Although no vibrational modes associated with cross-linking of the fibers could be identified, the secondary structure of dehydrated fibrous elastin was significantly different from alpha-elastin. The former differed from previous experimental measurements, but was close to the theoretical predictions with 36% beta-structures, 46% unordered, and 18% alpha-helix. alpha-Elastin contained 29% beta-structures, 53% unordered, and 18% alpha-helix. In nuchal fibers the amide I mode was polarized, consistent with the peptide bond. Strains of up to 60% in ligament fiber bundles resulted in no significant shifts in peak position or in secondary structure. Polarization measurements revealed that the peptide bonds and several side chains re-orientated closer to the fiber axis. Heating nuchal fibers to 60 degrees C to increase the energetic component of the elasticity was associated with a 30% increase in the proportion of beta-structures in the amide I band, a 50% increase in the amide III band, and a 50% reduction in the signal from bound water. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 931-940, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Helix‐coil energetics for helix formers and breakers reflect context and temperature: Mutants of helically robust,guest‐sensitive homopeptide hosts

The natural amino acids are primarily helix breakers at the low assignment temperatures characteristic of many studies, but recent genomic analyses of thermophilic proteins suggest that at high temperatures, some breakers may become strong helix formers. Moreover, the breaker/former inventory has not been previously characterized at the physiologically relevant temperature of 37°C. The versatility of ¹³C?O NMR chemical shifts as helicity reporters allows construction of two mutant peptide series, tailored to expand the range of temperature assignments for helical propensities and derived from the core hosts ^tL‐Ala₉XxxAla₉‐^tL and ^tL‐AlaNva₄XxxNva₄Ala₉‐^tL, Nva = norvaline. For three limiting guests Xxx, the helix former Nva and the breakers Gly and Pro, we report w_Xxx[T] assignments at seven temperatures from 2 to 80°C, validating our reasoning and paving the way for assignment of a definitive w_Xxx[T] data‐base. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 311–320, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational studies of the alpha-helical 28-43 fragment of the B3 domain of the immunoglobulin binding protein G from Streptococcus

To determine whether the alpha-helix in the B3 immunoglobulin binding domain of protein G from group G Streptococcus has conformational stability as an isolated fragment, we carried out a CD and NMR study of the 16-residue peptide in solution corresponding to this alpha-helix. Based on two-dimensional H-NMR spectra recorded at three different temperatures (283, 305, and 313 K), it was found that this peptide is mostly unstructured in water at these temperatures. Weak signals corresponding to i,i+3 or i,i+4 interactions, which are characteristic of formation of turn-like structures, were observed in the ROE spectra at all temperatures. The absence of a stable three-dimensional structure of the investigated peptide supports an earlier study (Blanco and Serrano, Eur J Biochem 1995, 230, 634-649) of a possible mechanism for folding of other (B1 and B2) immunoglobulin binding domains of Protein G. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 1032-1044, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Revisiting “reverse hydrophobic effect”: Applicable only to coil mutations at the surface

In a seminal paper, Pakula and Sauer (Nature, 1990, 344, 363–364) demonstrated that the increase in side‐chain hydrophobicity has a reverse relationship with protein stability. We have addressed this problem with several examples of mutants that span at different locations in protein structure based on secondary structure and solvent accessibility. We confirmed that the stability change upon single coil mutation at exposed region is reversely correlated with hydrophobicity with a single exception. In addition, we found the existence of such relationship in partially buried coil mutants. The stability of exposed helical mutants is governed by conformational properties. In buried and partially buried helical and strand mutants properties reflecting hydrophobicity have direct relationship with stability, whereas an opposite relationship was obtained with entropy and flexibility. The structural analysis of partially buried/exposed mutants showed that the surrounding residues are important for the stability change upon mutation. These results provide insights to understand the general behavior for the stability of proteins upon amino acid substitutions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 591–599, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Higher order structure of short collagen model peptides attached to dendrimers and linear polymers

Collagen, which is used as a biomaterial, is the most abundant protein in mammals. We have previously reported that a dendrimer modified with collagen model peptides, (Gly‐Pro‐Pro)₅, formed a collagen‐like triple‐helical structure, showing thermal reversibility. In this study, various collagen‐mimic dendrimers of different generations and at different binding ratios were synthesized, to investigate the relationship between the peptide clustering effect and the higher order structure formation. The formation of the higher order structure was influenced by the binding ratios of the peptide to the dendrimer, but was not influenced by the dendrimer generation. A spacer, placed between the dendrimer terminal group and the peptide, negatively contributed to the formation of the higher order structure. The collagen model peptides were also attached to poly(allylamine) (PAA) and poly‐L ‐lysine (poly(Lys)) to compare them with the collagen‐mimic dendrimers. The PAA‐based collagen‐mimic compound, bearing more collagen model peptides than the dendrimer, exhibited a thermally stable higher order structure. In contrast, this was not observed for the collagen‐mimic polymers based on poly(Lys). Therefore, dendrimers and vinyl polymers act as a scaffold for collagen model peptides and subsequently induce higher order structures. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 640–648, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Confocal Raman microscopy on single living young and old erythrocytes

Raman confocal microscopy, including the techniques of point Raman spectra, line mapping, 2D mapping, and time-dependent spectrum monitoring performed with 514.5 nm excitation light, was used in a comparative study on the distribution and oxidation states of hemoglobin (Hb) in young and old mature erythrocytes. It is demonstrated that in contrast to the homogeneous distribution of the Hb in young cells, there are more Hb distribution around the cell membrane in old erythrocyte. The proteins exhibit some extent of aggregation and conformational change, present less ability of oxidation, and lower oxygenation speed than the Hb in young erythrocytes. Our results also provide the first direct evidence of some intermediate oxygenated states of Hb between the two fully oxygenated (R) and deoxygenated (T) states in living erythrocyte, and give detail information about the conformational change of the intracellular Hb with time during the reoxygenation process. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 951-959, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Human tropoelastin sequence: Dynamics of polypeptide coded by exon 6 in solution

Calorimetric studies were performed on exon 6 in powdered form and in solution [water and 2,2,2‐trifluoroethanol (TFE), a structure‐inducing solvent or cosolvent]. Dynamic dielectric spectroscopy (DDS) analyses were realized in water and 20% TFE. The major role of solvent–peptide organization is evidenced with these techniques. Calorimetric measurements reveal the structural water organization around the polypeptide as well as the presence of hydrophobic interactions in TFE solution. Dielectric measurements showed for exon 6/water a decrease of relaxations times of bulk solvent implying a faster dynamics with a slight increase of the activation entropy, suggesting that exon 6 probably creates disorder within the solvent. For TFE/water mixtures, an influence of exon 6 on its environment was seen with a relaxation associated with the exon 6/solvent interactions reinforced by storage of 72 h. Finally, exon 6/solvent interactions were clearly observed with additionof TFE. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 943–952, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Bombesin-modified 6-14 C-terminal fragments adsorption on silver surfaces: influence of a surface substrate

Surface-enhanced Raman scattering (SERS) spectroscopy has been applied to investigate the interaction with a silver colloidal surface of following seven 6-14 fragments of bombesin (BN) C-terminus: cyclo[D-Phe(6),His(7),Leu(14)]BN(6-14), [D-Phe(6),Leu-NHEt(13),des-Met(14)]BN(6-14), [D-Phe(6),Leu(13)-(R)-p-chloro-Phe(14)]BN(6-14), [D-Phe(6),beta-Ala(11),Phe(13),Nle(14)]BN(6-14), [D-Tyr(6),beta-Ala(11),Phe(13),Nle(14)]BN(6-14), [D-Tyr(6),beta-Phe(11),Phe(13),Nle(14)OH]BN(6-14), and [D-Cys(6),Asn(7),D-Ala(11),Cys(14)]BN(6-14), potent r-GRP-R receptor antagonists used in chemotherapy and potential effective drugs in cancer treatment. The adsorption active sites and molecular orientations on the colloidal silver surface have been determined on the basis of SERS "surface selection rules" subsequent to a detailed SERS analysis. In addition, the similarities and differences of these spectra with the SERS spectra of the peptides immobilized on a roughened silver electrode surface have been examined. From the data, suggestion has been made about structural properties of these peptides on the colloidal surface. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 941-950, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Interplay between protein homeostasis networks in protein aggregation and proteotoxicity

The misfolding and aggregation of disease proteins is characteristic of numerous neurodegenerative diseases. Particular neuronal populations are more vulnerable to proteotoxicity while others are more apt to tolerate the misfolding and aggregation of disease proteins. Thus, the cellular environment must play a significant role in determining whether disease proteins are converted into toxic or benign forms. The endomembrane network of eukaryotes divides the cell into different subcellular compartments that possess distinct sets of molecular chaperones and protein interaction networks. Chaperones act as agonists and antagonists of disease protein aggregation to prevent the accumulation of toxic intermediates in the aggregation pathway. Interacting partners can also modulate the conformation and localization of disease proteins and thereby influence proteotoxicity. Thus, interplay between these protein homeostasis network components can modulate the self‐association of disease proteins and determine whether they elicit a toxic or benign outcome. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 229–236, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com