Structural determinants of the enantioselectivity of the hydroxynitrile lyase from Hevea brasiliensis

The hydroxynitrile lyase from the tropical rubber tree Hevea brasiliensis (HbHNL) is utilized as a biocatalyst in stereospecific syntheses of alpha-hydroxynitriles from aldehydes and methyl-ketones. The catalyzed reaction represents one of the few industrially relevant examples of enzyme mediated C-C coupling reactions. In this work, we determined the X-ray crystal structures (at 1.54 and 1.76 Angstroms resolution) of HbHNL complexes with two chiral substrates -- mandelonitrile and 2,3-dimethyl-2-hydroxy-butyronitrile -- by soaking and rapid freeze quenching techniques. This is the first structural observation of the complex between a HNL and chiral substrates. Consistent with the known selectivity of the enzyme, only the S-enantiomers of the two substrates were observed in the active site. The binding modes of the chiral substrates were identical to that observed for the biological substrate acetone cyanohydrin. This indicates that the transformation of these non-natural substrates follows the same mechanism. A large hydrophobic pocket was identified in the active site of HbHNL which accommodates the more voluminous substituents of the two substrates. A three-point binding mode of the substrates -- hydrophobic pocket, hydrogen bonds between the hydroxyl group and Ser80 and Thr11, electrostatic interaction of the cyano group with Lys236 -- offers a likely structural explanation for the enantioselectivity of the enzyme. The structural data rationalize the observed (S)-enantioselectivity and form the basis for modifying the stereospecificity through rational design. The structures also revealed the necessity of considerable flexibility of the sidechain of Trp128 in order to bind and transform larger substrates.     

Three-dimensional structures of enzyme-substrate complexes of the hydroxynitrile lyase from Hevea brasiliensis.

The 3D structures of complexes between the hydroxynitrile lyase from Hevea brasiliensis (Hb-HNL) and several substrate and/or inhibitor molecules, including trichloracetaldehyde, hexafluoracetone, acetone, and rhodanide, were determined by X-ray crystallography. The complex with trichloracetaldehyde showed a covalent linkage between the protein and the inhibitor, which had apparently resulted from nucleophilic attack of the catalytic Ser80-Ogamma. All other complexes showed the substrate or inhibitor molecule merely hydrogen bonded to the protein. In addition, the native crystal structure of Hb-HNL was redetermined at cryo-temperature and at room temperature, eliminating previous uncertainties concerning residual electron density within the active site, and leading to the observation of two conserved water molecules. One of them was found to be conserved in all complex structures and appears to have mainly structural significance. The other water molecule is conserved in all structures except for the complex with rhodanide; it is hydrogen bonded to the imidazole of the catalytic His235 and appears to affect the Hb-HNL catalyzed reaction. The observed 3D structural data suggest implications for the enzyme mechanism. It appears that the enzyme-catalyzed cyanohydrin formation is unlikely to proceed via a hemiacetal or hemiketal intermediate covalently attached to the enzyme, despite the observation of such an intermediate for the complex with trichloracetaldehyde. Instead, the data are consistent with a mechanism where the incoming substrate is activated by hydrogen bonding with its carbonyl oxygen to the Ser80 and Thr11 hydroxy groups. A hydrogen cyanide molecule subsequently replaces a water molecule and is deprotonated presumably by the His235 base. Deprotonation is facilitated by the proximity of the positive charge of the Lys236 side chain.     

Elucidation of the mode of substrate binding to hydroxynitrile lyase from Hevea brasiliensis

The hydroxynitrile lyase from Hevea brasiliensis (Hb-HNL) is used as a catalyst in enantiospecific syntheses of alpha-hydroxynitriles from aldehydes and methyl-ketones. The catalyzed reaction represents one of the few industrially relevant examples of enzyme mediated C-C coupling reactions. In this work, we modeled Hb-HNL substrate complexes that have as yet proven inaccessible to experimental structure determination and were able to identify two binding modes for the natural substrate acetone cyanohydrin in docking simulations. Discrimination of the two alternatives was achieved by modeling complexes with two different chiral cyanohydrins followed by an analysis of the respective relative binding energies from molecular mechanics and thermodynamic integration. Only for one of the alternative binding modes the experimentally established S-selectivity of the enzyme was correctly predicted. Our results yielded further support for an enzymatic mechanism involving the catalytic triad Ser80, His235, and Asp207 as a general acid/base. A pivotal role was ascribed to Lys236, which seems to be crucial for enzymatic activity at low pH values. In addition, the modeling calculations provided possible explanations for the observed substrate and enantioselectivity of the enzyme that rationalize available mutational data and will be the basis for future protein engineering efforts.     

Mechanistic aspects of cyanogenesis from active-site mutant Ser80Ala of hydroxynitrile lyase from Manihot esculenta in complex with acetone cyanohydrin

The structure and function of hydroxynitrile lyase from Manihot esculenta (MeHNL) have been analyzed by X-ray crystallography and site-directed mutagenesis. The crystal structure of the MeHNL-S80A mutant enzyme has been refined to an R-factor of 18.0% against diffraction data to 2.1-A resolution. The three-dimensional structure of the MeHNL-S80A-acetone cyanohydrin complex was determined at 2.2-A resolution and refined to an R-factor of 18.7%. Thr11 and Cys81 involved in substrate binding have been substituted by Ala in site-directed mutagenesis. The kinetic measurements of these mutant enzymes are presented. Combined with structural data, the results support a mechanism for cyanogenesis in which His236 as a general base abstracts a proton from Ser80, thereby allowing proton transfer from the hydroxyl group of acetone cyanohydrin to Ser80. The His236 imidazolium cation then facilitates the leaving of the nitrile group by proton donating.     

A QM/MM study of the reaction mechanism of (R)‐hydroxynitrile lyases from Arabidopsis thaliana (AtHNL)

Hydroxynitrile lyases (HNLs) catalyze the conversion of chiral cyanohydrins to hydrocyanic acid (HCN) and aldehyde or ketone. Hydroxynitrile lyase from Arabidopsis thaliana (AtHNL) is the first R‐selective HNL enzyme containing an α/β‐hydrolases fold. In this article, the catalytic mechanism of AtHNL was theoretically studied by using QM/MM approach based on the recently obtained crystal structure in 2012. Two computational models were constructed, and two possible reaction pathways were considered. In Path A, the calculation results indicate that the proton transfer from the hydroxyl group of cyanohydrin occurs firstly, and then the cleavage of C1‐C2 bond and the rotation of the generated cyanide ion (CN^?) follow, afterwards, CN^? abstracts a proton from His236 via Ser81. The C1‐C2 bond cleavage and the protonation of CN^? correspond to comparable free energy barriers (12.1 vs. 12.2 kcal mol^?1), suggesting that both of the two processes contribute a lot to rate‐limiting. In Path B, the deprotonation of the hydroxyl group of cyanohydrin and the cleavage of C1‐C2 bond take place in a concerted manner, which corresponds to the highest free energy barrier of 13.2 kcal mol^?1. The free energy barriers of Path A and B are very similar and basically agree well with the experimental value of HbHNL, a similar enzyme of AtHNL. Therefore, both of the two pathways are possible. In the reaction, the catalytic triad (His236, Ser81, and Asp208) acts as the general acid/base, and the generated CN^? is stabilized by the hydroxyl group of Ser81 and the main‐chain NH‐groups of Ala13 and Phe82. Proteins 2015; 83:66–77. © 2014 Wiley Periodicals, Inc.     

Observation of a short, strong hydrogen bond in the active site of hydroxynitrile lyase from Hevea brasiliensis explains a large pKa shift of the catalytic base induced by the reaction intermediate

The hydroxynitrile lyase from Hevea brasiliensis (HbHNL) uses a catalytic triad consisting of Ser(80)-His(235)-Asp(207) to enhance the basicity of Ser(80)-O gamma for abstracting a proton from the OH group of the substrate cyanohydrin. Following the observation of a relatively short distance between a carboxyl oxygen of Asp(207) and the N delta(1)(His(235)) in a 1.1 A crystal structure of HbHNL, we here show by (1)H and (15)N-NMR spectroscopy that a short, strong hydrogen bond (SSHB) is formed between the two residues upon binding of the competitive inhibitor thiocyanate to HbHNL: the proton resonance of H-N delta 1(His(235)) moves from 15.41 ppm in the free enzyme to 19.35 ppm in the complex, the largest downfield shift observed so far upon inhibitor binding. Simultaneously, the D/H fractionation factor decreases from 0.98 to 0.35. In the observable pH range, i.e. between pH 4 and 10, no significant changes in chemical shifts (and therefore hydrogen bond strength) were observed for free HbHNL. For the complex with thiocyanate, the 19.35 ppm signal returned to 15.41 ppm at approximately pH 8, which indicates a pK(a) near this value for the H-N epsilon(2)(His(235)). These NMR results were analyzed on the basis of finite difference Poisson-Boltzmann calculations, which yielded the relative free energies of four protonation states of the His(235)-Asp(207) pair in solution as well as in the protein environment with and without bound inhibitor. The calculations explain all the NMR features, i.e. they suggest why a short, strong hydrogen bond is formed upon inhibitor binding and why this short, strong hydrogen bond reverts back to a normal one at approximately pH 8. Importantly, the computations also yield a shift of the free energy of the anionic state relative to the zwitterionic reference state by about 10.6 kcal/mol, equivalent to a shift in the apparent pK(a) of His(235) from 2.5 to 10. This huge inhibitor-induced increase in basicity is a prerequisite for His(235) to act as general base in the HbHNL-catalyzed cyanohydrin reaction.     

Structure determinants of substrate specificity of hydroxynitrile lyase from Manihot esculenta

Tryptophan 128 of hydroxynitrile lyase of Manihot esculenta (MeHNL) covers a significant part of a hydrophobic channel that gives access to the active site of the enzyme. This residue was therefore substituted in the mutant MeHNL-W128A by alanine to study its importance for the substrate specificity of the enzyme. Wild-type MeHNL and MeHNL-W128A showed comparable activity on the natural substrate acetone cyanohydrin (53 and 40 U/mg, respectively). However, the specific activities of MeHNL-W128A for the unnatural substrates mandelonitrile and 4-hydroxymandelonitrile are increased 9-fold and approximately 450-fold, respectively, compared with the wild-type MeHNL. The crystal structure of the MeHNL-W128A substrate-free form at 2.1 A resolution indicates that the W128A substitution has significantly enlarged the active-site channel entrance, and thereby explains the observed changes in substrate specificity for bulky substrates. Surprisingly, the MeHNL-W128A--4-hydroxybenzaldehyde complex structure at 2.1 A resolution shows the presence of two hydroxybenzaldehyde molecules in a sandwich type arrangement in the active site with an additional hydrogen bridge to the reacting center.     

Crystal structure of enteropeptidase light chain complexed with an analog of the trypsinogen activation peptide.

Enteropeptidase is a membrane-bound serine protease that initiates the activation of pancreatic hydrolases by cleaving and activating trypsinogen. The enzyme is remarkably specific and cleaves after lysine residues of peptidyl substrates that resemble trypsinogen activation peptides such as Val-(Asp)4-Lys. To characterize the determinants of substrate specificity, we solved the crystal structure of the bovine enteropeptidase catalytic domain to 2.3 A resolution in complex with the inhibitor Val-(Asp)4-Lys-chloromethane. The catalytic mechanism and contacts with lysine at substrate position P1 are conserved with other trypsin-like serine proteases. However, the aspartyl residues at positions P2-P4 of the inhibitor interact with the enzyme surface mainly through salt bridges with the Nzeta atom of Lys99. Mutation of Lys99 to Ala, or acetylation with acetic anhydride, specifically prevented the cleavage of trypsinogen or Gly-(Asp)4-Lys-beta-naphthylamide and reduced the rate of inhibition by Val-(Asp)4-Lys-chloromethane 22 to 90-fold. For these reactions, Lys99 was calculated to account for 1.8 to 2.5 kcal mol(-1) of the free energy of transition state binding. Thus, a unique basic exosite on the enteropeptidase surface has evolved to facilitate the cleavage of its physiological substrate, trypsinogen.     

Analysis of the class I aldolase binding site architecture based on the crystal structure of 2-deoxyribose-5-phosphate aldolase at 0.99A resolution

The crystal structure of the bacterial (Escherichia coli) class I 2-deoxyribose-5-phosphate aldolase (DERA) has been determined by Se-Met multiple anomalous dispersion (MAD) methods at 0.99A resolution. This structure represents the highest-resolution X-ray structure of an aldolase determined to date and enables a true atomic view of the enzyme. The crystal structure shows the ubiquitous TIM alpha/beta barrel fold. The enzyme contains two lysine residues in the active site. Lys167 forms the Schiff base intermediate, whereas Lys201, which is in close vicinity to the reactive lysine residue, is responsible for the perturbed pK(a) of Lys167 and, hence, also a key residue in the reaction mechanism. DERA is the only known aldolase that is able to use aldehydes as both aldol donor and acceptor molecules in the aldol reaction and is, therefore, of particular interest as a biocatalyst in synthetic organic chemistry. The uncomplexed DERA structure enables a detailed comparison with the substrate complexes and highlights a conformational change in the phosphate-binding site. Knowledge of the enzyme active-site environment has been the basis for exploration of catalysis of non-natural substrates and of mutagenesis of the phosphate-binding site to expand substrate specificity. Detailed comparison with other class I aldolase enzymes and DERA enzymes from different organisms reveals a similar geometric arrangement of key residues and implies a potential role for water as a general base in the catalytic mechanism.     

Lysine-73 is involved in the acylation and deacylation of beta-lactamase

Lysine 73 is a conserved active-site residue in the class A beta-lactamases, as well as other members of the serine penicillin-sensitive enzyme family; its role in catalysis remains controversial and uncertain. Mutation of Lys73 to alanine in the beta-lactamase from Bacillus licheniformis resulted in a substantial reduction in both turnover rate (k(cat)) and catalytic efficiency (k(cat)/K(m)), and a very significant shift in pK(1) to higher pH in the bell-shaped pH-rate profiles (k(cat)/K(m)) for several penicillin and cephalosporin substrates. The increase in pK(1) is consistent with the removal of the positive ammonium group of the lysine from the proximity of Glu166, to which the acid limb has been ascribed. The alkaline limb of the k(cat)/K(m) vs profiles is not shifted appreciably, as might have been expected if this limb reflected the ionization of Lys73 in the wild-type enzyme. The k(cat)/K(m) at the pH optimum for the mutant was down about 200-fold for penicillins and around 10(4) for cephalosporins, compared to the wild-type, suggesting significant differences in the mechanisms for catalysis of penicillins compared to cephalosporins. Burst kinetics were observed with several substrates assayed with K73A beta-lactamase, indicating an underlying branched-pathway kinetic scheme, and rate-limiting deacylation. FTIR analysis was used to determine whether acylation or deacylation was rate-limiting. In general, acylation was the rate-limiting step for cephalosporin substrates, whereas deacylation was rate-limiting for penicillin substrates. The results indicate that Lys73 plays an important role in both the acylation and deacylation steps of the catalytic mechanism. The effects of this mutation (K73A) indicate that Lys73 does not function as a general base in the catalytic mechanism of beta-lactamase. The existence of bell-shaped pH-rate profiles for the K73A variant suggests that Lys73 is not directly responsible for either limb in such plots. It is likely that both Glu166 and Lys73 are important to each other in terms of maintaining the optimum electrostatic environment for fully efficient catalytic activity to occur.     

Prediction of the mechanism of action of omuralide (clasto-lactacystin beta-lactone) on human cathepsin A based on a structural model of the yeast proteasome beta5/PRE2-subunit/omuralide complex

Cathepsin A (CathA) is a lysosomal serine carboxypeptidase that exhibits homology and structural similarity to the yeast and wheat serine carboxypeptidases (CPY and CPW) belonging to the alpha/beta-hydrolase fold family. Human CathA (hCathA) and CPW have been demonstrated to be inhibited by a proteasome (threonine protease) inhibitor, lactacystin, and its active derivative, omuralide (clasto-lactacystin beta-lactone), as well as chymostatin. A hCathA/omuralide complex model constructed on the basis of the X-ray crystal structures of the CPW/chymostatin complex and the yeast proteasome beta-subunit (beta5/PRE2)/omuralide one predicted that the conformation of omuralide in the active-site cleft of proteasome beta5/PRE2 should be very similar to that of chymostatin at the S1 catalytic subsites in the hCathA- and CPW-complexes. The relative positions of the glycine residues, i.e., Gly57 in hCathA, Gly53 in CPW, and Gly47 in beta5/PRE2, present in the oxyanion hole of each enzyme were also highly conserved. These results suggest that omuralide might inhibit hCathA and CPW at the S1 subsite in their active-site clefts through direct binding to the active serine residue.     

Binding of the COOH-terminal lysine residue of streptokinase to plasmin(ogen) kringles enhances formation of the streptokinase.plasmin(ogen) catalytic complexes

Streptokinase (SK) activates human fibrinolysis by inducing non-proteolytic activation of the serine proteinase zymogen, plasminogen (Pg), in the SK.Pg* catalytic complex. SK.Pg* proteolytically activates Pg to plasmin (Pm). SK-induced Pg activation is enhanced by lysine-binding site (LBS) interactions with kringles on Pg and Pm, as evidenced by inhibition of the reactions by the lysine analogue, 6-aminohexanoic acid. Equilibrium binding analysis and [Lys]Pg activation kinetics with wild-type SK, carboxypeptidase B-treated SK, and a COOH-terminal Lys414 deletion mutant (SKDeltaK414) demonstrated a critical role for Lys414 in the enhancement of [Lys]Pg and [Lys]Pm binding and conformational [Lys]Pg activation. The LBS-independent affinity of SK for [Glu]Pg was unaffected by deletion of Lys414. By contrast, removal of SK Lys414 caused 19- and 14-fold decreases in SK affinity for [Lys]Pg and [Lys]Pm binding in the catalytic mode, respectively. In kinetic studies of the coupled conformational and proteolytic activation of [Lys]Pg, SKDeltaK414 exhibited a corresponding 17-fold affinity decrease for formation of the SKDeltaK414.[Lys]Pg* complex. SKDeltaK414 binding to [Lys]Pg and [Lys]Pm and conformational [Lys]Pg activation were LBS-independent, whereas [Lys]Pg substrate binding and proteolytic [Lys]Pm generation remained LBS-dependent. We conclude that binding of SK Lys414 to [Lys]Pg and [Lys]Pm kringles enhances SK.[Lys]Pg* and SK.[Lys]Pm catalytic complex formation. This interaction is distinct structurally and functionally from LBS-dependent Pg substrate recognition by these complexes.     

Contribution of active-site residues to the function of onconase, a ribonuclease with antitumoral activity

Onconase (ONC), a homologue of ribonuclease A (RNase A), is in clinical trials for the treatment of cancer. ONC possesses a conserved active-site catalytic triad, which is composed of His10, Lys31, and His97. The three-dimensional structure of ONC suggests that two additional residues, Lys9 and an N-terminal lactam formed from a glutamine residue (Pca1), could also contribute to catalysis. To determine the role of Pca1, Lys9, and Lys31 in the function of ONC, site-directed mutagenesis was used to replace each with alanine. Values of k(cat)/K(M) for the variants were determined with a novel fluorogenic substrate, which was designed to match the nucleobase specificity of ONC and gives the highest known k(cat)/K(M) value for the enzyme. The K9A and K31A variants display 10(3)-fold lower k(cat)/K(M) values than the wild-type enzyme, and a K9A/K31A double variant suffers a >10(4)-fold decrease in catalytic activity. In addition, replacing Lys9 or Lys31 eliminates the antitumoral activity of ONC. The side chains of Pca1 and Lys9 form a hydrogen bond in crystalline ONC. Replacing Pca1 with an alanine residue lowers the catalytic activity of ONC by 20-fold. Yet, replacing Pca1 in the K9A variant enzyme does not further reduce catalytic activity, revealing that the function of the N-terminal pyroglutamate residue is to secure Lys9. The thermodynamic cycle derived from k(cat)/K(M) values indicates that the Pca1...Lys9 hydrogen bond contributes 2.0 kcal/mol to the stabilization of the rate-limiting transition state during catalysis. Finally, binding isotherms with a substrate analogue indicate that Lys9 and Lys31 contribute little to substrate binding and that the low intrinsic catalytic activity of ONC originates largely from the low affinity of the enzyme for its substrate. These findings could assist the further development of ONC as a cancer chemotherapeutic.     

The role of OXA-1 beta-lactamase Asp(66) in the stabilization of the active-site carbamate group and in substrate turnover

The OXA-1 beta-lactamase is one of the few class D enzymes that has an aspartate residue at position 66, a position that is proximal to the active-site residue Ser(67). In class A beta-lactamases, such as TEM-1 and SHV-1, residues adjacent to the active-site serine residue play a crucial role in inhibitor resistance and substrate selectivity. To probe the role of Asp(66) in substrate affinity and catalysis, we performed site-saturation mutagenesis at this position. Ampicillin MIC (minimum inhibitory concentration) values for the full set of Asp(66) mutants expressed in Escherichia coli DH10B ranged from < or =8 microg/ml for cysteine, proline and the basic amino acids to > or =256 microg/ml for asparagine, leucine and the wild-type aspartate. Replacement of aspartic acid by asparagine at position 66 also led to a moderate enhancement of extended-spectrum cephalosporin resistance. OXA-1 shares with other class D enzymes a carboxylated residue, Lys(70), that acts as a general base in the catalytic mechanism. The addition of 25 mM bicarbonate to Luria-Bertani-broth agar resulted in a > or =16-fold increase in MICs for most OXA-1 variants with amino acid replacements at position 66 when expressed in E. coli. Because Asp(66) forms hydrogen bonds with several other residues in the OXA-1 active site, we propose that this residue plays a role in stabilizing the CO2 bound to Lys(70) and thereby profoundly affects substrate turnover.     

Structural analyses of covalent enzyme-substrate analog complexes reveal strengths and limitations of de novo enzyme design

We report the cocrystal structures of a computationally designed and experimentally optimized retro-aldol enzyme with covalently bound substrate analogs. The structure with a covalently bound mechanism-based inhibitor is similar to, but not identical with, the design model, with an RMSD of 1.4 Å over active-site residues and equivalent substrate atoms. As in the design model, the binding pocket orients the substrate through hydrophobic interactions with the naphthyl moiety such that the oxygen atoms analogous to the carbinolamine and β-hydroxyl oxygens are positioned near a network of bound waters. However, there are differences between the design model and the structure: the orientation of the naphthyl group and the conformation of the catalytic lysine are slightly different; the bound water network appears to be more extensive; and the bound substrate analog exhibits more conformational heterogeneity than typical native enzyme–inhibitor complexes. Alanine scanning of the active-site residues shows that both the catalytic lysine and the residues around the binding pocket for the substrate naphthyl group make critical contributions to catalysis. Mutating the set of water-coordinating residues also significantly reduces catalytic activity. The crystal structure of the enzyme with a smaller substrate analog that lacks naphthyl ring shows the catalytic lysine to be more flexible than in the naphthyl–substrate complex; increased preorganization of the active site would likely improve catalysis. The covalently bound complex structures and mutagenesis data highlight the strengths and weaknesses of the de novo enzyme design strategy.     

Experimental and computational investigations of Ser10 and Lys13 in the binding and cleavage of DNA substrates by Escherichia coli DNA topoisomerase I

Ser10 and Lys13 found near the active site tyrosine of Escherichia coli DNA topoisomerase I are conserved among the type IA topoisomerases. Site-directed mutagenesis of these two residues to Ala reduced the relaxation and DNA cleavage activity, with a more severe effect from the Lys13 mutation. Changing Ser10 to Thr or Lys13 to Arg also resulted in loss of DNA cleavage and relaxation activity of the enzyme. In simulations of the open form of the topoisomerase–DNA complex, Lys13 interacts directly with Glu9 (proposed to be important in the catalytic mechanism). This interaction is removed in the K13A mutant, suggesting the importance of lysine as either a proton donor or a stabilizing cation during strand cleavage, while the Lys to Arg mutation significantly distorts catalytic residues. Ser10 forms a direct hydrogen bond with a phosphate group near the active site and is involved in direct binding of the DNA substrate; this interaction is disturbed in the S10A and S10T mutants. This combination of a lysine and a serine residue conserved in the active site of type IA topoisomerases may be required for correct positioning of the scissile phosphate and coordination of catalytic residues relative to each other so that DNA cleavage and subsequent strand passage can take place.     

Serine proteinase inhibition by the active site titrant N alpha-(N, N-dimethylcarbamoyl)-alpha-azaornithine p-nitrophenyl ester. A comparative study.

Kinetics for the hydrolysis of the chromogenic active-site titrant N alpha-(N,N-dimethylcarbamoyl)-alpha-azaornithine p-nitrophenyl ester (Dmc-azaOrn-ONp) catalysed by bovine beta-trypsin, bovine alpha-thrombin, bovine Factor Xa, human alpha-thrombin, human Factor Xa, human Lys77-plasmin, human urinary kallikrein, Mr 33 000 and Mr 54 000 species of human urokinase, porcine pancreatic beta-kallikrein-A and -B and Ancrod (the coagulating serine proteinase from the Malayan pit viper Agkistrodon rhodostoma venom) have been obtained between pH 6.0 and 8.0, at 21.0 degrees C, and analysed in parallel with those for the enzymatic cleavage of N alpha-(N,N-dimethylcarbamoyl)-alpha-azalysine p-nitrophenyl ester (Dmc-azaLys-ONp). The enzyme kinetics are consistent with the minimum three-step catalytic mechanism of serine proteinases, the rate-limiting step being represented by the deacylation process. Bovine beta-trypsin kinetics are modulated by the acid-base equilibrium of the His57 catalytic residue (pKa approximately 6.9). Dmc-azaOrn-ONp and Dmc-azaLys-ONp bind stoichiometrically to the serine proteinase active site, and allow the reliable determination of the active enzyme concentration between 1.0 x 10-6 M and 3.0 x 10-4 M. The affinity and the reactivity for Dmc-azaOrn-ONp (expressed by Ks and k+2/Ks, respectively) of the serine proteinases considered are much lower than those for Dmc-azaLys-ONp. The very different affinity and reactivity properties for Dmc-azaOrn-ONp and Dmc-azaLys-ONp have been related to the different size of the ornithine/lysine side chains, and to the ensuing different positioning of the active-site titrants upon binding to the enzyme catalytic centre (i.e. to P1-S1 recognition). These data represent the first detailed comparative investigation on the catalytic properties of serine proteinases towards an ornithine derivative (i. e. Dmc-azaOrn-ONp).     

Contribution of Lys276 to the conformational flexibility of the active site of glutamate decarboxylase from Escherichia coli.

Glutamate decarboxylase is a pyridoxal 5'-phosphate-dependent enzyme responsible for the irreversible alpha-decarboxylation of glutamate to yield 4-aminobutyrate. In Escherichia coli, as well as in other pathogenic and nonpathogenic enteric bacteria, this enzyme is a structural component of the glutamate-based acid resistance system responsible for cell survival in extremely acidic conditions (pH < 2.5). The contribution of the active-site lysine residue (Lys276) to the catalytic mechanism of E. coli glutamate decarboxylase has been determined. Mutation of Lys276 into alanine or histidine causes alterations in the conformational properties of the protein, which becomes less flexible and more stable. The purified mutants contain very little (K276A) or no (K276H) cofactor at all. However, apoenzyme preparations can be reconstituted with a full complement of coenzyme, which binds tightly but slowly. The observed spectral changes suggest that the cofactor is present at the active site in its hydrated form. Binding of glutamate, as detected by external aldimine formation, occurs at a very slow rate, 400-fold less than that of the reaction between glutamate and pyridoxal 5'-phosphate in solution. Both Lys276 mutants are unable to decarboxylate the substrate, thus preventing detailed investigation of the role of this residue on the catalytic mechanism. Several lines of evidence show that mutation of Lys276 makes the protein less flexible and its active site less accessible to substrate and cofactor.     

Catalytic mechanism of the Streptomyces K15 DD-transpeptidase/penicillin-binding protein probed by site-directed mutagenesis and structural analysis

The Streptomyces K15 penicillin-binding DD-transpeptidase is presumed to be involved in peptide cross-linking during bacterial cell wall peptidoglycan assembly. To gain insight into the catalytic mechanism, the roles of residues Lys38, Ser96, and Cys98, belonging to the structural elements defining the active site cleft, have been investigated by site-directed mutagenesis, biochemical studies, and X-ray diffraction analysis. The Lys38His and Ser96Ala mutations almost completely abolished the penicillin binding and severely impaired the transpeptidase activities while the geometry of the active site was essentially the same as in the wild-type enzyme. It is proposed that Lys38 acts as the catalytic base that abstracts a proton from the active serine Ser35 during nucleophilic attack and that Ser96 is a key intermediate in the proton transfer from the Ogamma of Ser35 to the substrate leaving group nitrogen. The role of these two residues should be conserved among penicillin-binding proteins containing the Ser-Xaa-Asn/Cys sequence in motif 2. Conversion of Cys98 into Asn decreased the transpeptidase activity and increased hydrolysis of the thiolester substrate and the acylation rate with most beta-lactam antibiotics. Cys98 is proposed to play the same role as Asn in motif 2 of other penicilloyl serine transferases in properly positioning the substrate for the catalytic process.     

Molecular cloning, expression and characterization of pyridoxamine-pyruvate aminotransferase

Pyridoxamine-pyruvate aminotransferase is a PLP (pyridoxal 5'-phosphate) (a coenzyme form of vitamin B6)-independent aminotransferase which catalyses a reversible transamination reaction between pyridoxamine and pyruvate to form pyridoxal and L-alanine. The gene encoding the enzyme has been identified, cloned and overexpressed for the first time. The mlr6806 gene on the chromosome of a symbiotic nitrogen-fixing bacterium, Mesorhizobium loti, encoded the enzyme, which consists of 393 amino acid residues. The primary sequence was identical with those of archaeal aspartate aminotransferase and rat serine-pyruvate aminotransferase, which are PLP-dependent aminotransferases. The results of fold-type analysis and the consensus amino acid residues found around the active-site lysine residue identified in the present study showed that the enzyme could be classified into class V aminotransferases of fold type I or the AT IV subfamily of the alpha family of the PLP-dependent enzymes. Analyses of the absorption and CD spectra of the wild-type and point-mutated enzymes showed that Lys197 was essential for the enzyme activity, and was the active-site lysine residue that corresponded to that found in the PLP-dependent aminotransferases, as had been suggested previously [Hodsdon, Kolb, Snell and Cole (1978) Biochem. J. 169, 429-432]. The K(d) value for pyridoxal determined by means of CD was 100-fold lower than the K(m) value for it, suggesting that Schiff base formation between pyridoxal and the active-site lysine residue is partially rate determining in the catalysis of pyridoxal. The active-site structure and evolutionary aspects of the enzyme are discussed.