Comparative genetics in sugarcane enables structured map enhancement and validation of marker-trait associations

As sugarcane is a complex polyaneuploid with many chromosomes, large numbers of markers are required to generate genetic maps with reasonable levels of genome coverage. Comparative mapping was investigated as an approach for both quantitative trait loci (QTL) validation and genetic map enhancement in sugarcane. More than 1000 SSR and AFLP markers were scored in a bi-parental Australian sugarcane population (Q3) that was segregating widely for sugar content-related traits. Two maps were constructed, one for each parent. The Q117 (female) and MQ77-340 (male) maps each contained almost 400 markers distributed onto approximately 100 linkage groups (LGs), of which nearly half could be assigned to homology groups (HGs) on the basis of SSRs. Then, using common SSR and AFLP markers, the two Q3 parental maps were aligned with the maps of the French cultivar, R570, and of the Australian cultivar, Q165^A (A denotes variety covered by Australian plant breeding rights). As a result of comparative mapping, all ten HGs in the Q117 map, and all eleven HGs in the MQ77-340 map could be re-assigned to seven of the expected eight sugarcane HGs, revealing that one sugarcane HG was not covered at all in either Q3 parental map, and that other HGs were poorly represented. QTL analysis in the Q3 population identified approximately 75 marker-trait associations (MTAs) from approximately 18 chromosomal regions or putative QTL in each map for three sugar content-related traits. QTL location appeared to be consistent between the 4 maps; two of the eight HGs were observed to contain MTAs for brix in two or three maps, strongly suggesting the location of sugar content-related trait loci in these HGs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Genetic mapping in sugarcane, a high polyploid, using bi-parental progeny: identification of a gene controlling stalk colour and a new rust resistance gene

Modern sugarcane cultivars (Saccharum spp) are highly polyploïd and aneuploid interspecific hybrids (2n=100–130). Two genetic maps were constructed using a population of 198 progeny from a cross between R570, a modern cultivar, and MQ76-53, an old Australian clone derived from a cross between Trojan (a modern cultivar) and SES528 (a wild Saccharum spontaneum clone). A total of 1,666 polymorphic markers were produced using 37 AFLP primer combinations, 46 SSRs and 9 RFLP probes. Linkage analysis led to the construction of 86 cosegregation groups for R570 and 105 cosegregation groups for MQ76-53 encompassing 424 and 536 single dose markers, respectively. The cumulative length of the R570 map was 3,144 cM, while that of the MQ76-53 map was 4,329 cM. Here, we integrated mapping information obtained on R570 in this study with that derived from a previous map based on a selfed R570 population. Two new genes controlling Mendelian traits were localized on the MQ76-53 map: a gene controlling the red stalk colour was linked at 6.5 cM to an AFLP marker and a new brown rust resistance gene was linked at 23 cM to an AFLP marker. Besides another previously identified brown rust resistance gene (Bru1), these two genes are the only other major genes to be identified in sugarcane so far.     

Genetic control of yield related stalk traits in sugarcane

A major focus of sugarcane variety improvement programs is to increase sugar yield, which can be accomplished by either increasing the sugar content of the cane or by increasing cane yield, as the correlation between these traits is low. We used a cross between an Australian sugarcane variety Q165, and a Saccharum officinarum accession, IJ76-514, to dissect the inheritance of yield-related traits in the complex polyploid sugarcane. A population of 227 individuals was grown in a replicated field trial and evaluated over 3 years for stalk weight, stalk diameter, stalk number, stalk length and total biomass. Over 1,000 AFLP and SSR markers were scored across the population and used to identify quantitative trait loci (QTL). In total, 27 regions were found that were significant at the 5% threshold using permutation tests with at least one trait; individually, they explained from 4 to 10% of the phenotypic variation and up to 46% were consistent across years. With the inclusion of digeneic interactions, from 28 to 60% of the variation was explained for these traits. The 27 genomic regions were located on 22 linkage groups (LGs) in six of the eight homology groups (HGs) indicating that a number of alleles or quantitative trait alleles (QTA) at each QTL contribute to the trait; from one to three alleles had an effect on the traits for each QTL identified. Alleles of a candidate gene, TEOSINTE BRANCHED 1 (TB1), the major gene controlling branching in maize, were mapped in this population using either an SSR or SNP markers. Two alleles showed some association with stalk number, but unlike maize, TB1 is not a major gene controlling branching in sugarcane but only has a minor and variable effect.     

Construction of a SSR-based genetic map and identification of QTL for domestication traits using recombinant inbred lines from a cross between wild and cultivated cowpea (<Emphasis Type="Italic">V. unguiculata</Emphasis> (L.) Walp.)

Cowpea (Vigna unguiculata (L.) Walp.) is a grain legume commonly grown and consumed in many parts of the tropics and subtropics. A genetic linkage map was constructed using simple sequence repeat (SSR) markers and a recombinant inbred (RI) population of159 individuals derived from a cross between the breeding line 524B, a California Blackeye, and 219-01, a perennial wild cowpea from Kenya. Out of 912 primer combinations predicted to amplify SSRs in cowpea, 639 reliably produced amplification products in PCR assays and 202 (31.6%) were polymorphic between the two parents. These polymorphic SSRs were used to construct a genetic map consisting of 11 linkage groups (LGs) spanning 677 cM, with an average distance between markers of 3 cM. Agronomic traits related to domestication (seed weight, pod shattering) were analyzed together with the genotypic data. Six quantitative trait loci (QTL) for seed size were revealed with the phenotypic variation ranging from 8.9 to 19.1%. Four QTL for pod shattering were identified with the phenotypic variation ranging from 6.4 to 17.2%. The QTL for seed size and pod shattering mainly cluster in two areas of LGs 1 and 10, facilitating the use of marker-assisted selection to eliminate undesirable wild phenotypes in breeding activities involving introgression of traits from wild germplasm. The generation of an SSR-based molecular map and additional trait-linked markers also contributes to the expanding tool kit available to cowpea breeders, especially in Africa.     

Construction of a genetic linkage map for Saccharum officinarum incorporating both simplex and duplex markers to increase genome coverage.

Saccharum officinarum L. is an octoploid with 80 chromosomes and a basic chromosome number of x = 10. It has high stem sucrose and contributes 80% of the chromosomes to the interspecific sugarcane cultivars that are grown commercially for sucrose. A genetic linkage map was developed for S. officinarum (clone IJ76-514) using a segregating population generated from a cross between Q165 (a commercial sugarcane cultivar) and IJ76-514. In total, 40 AFLP and 72 SSR primer pairs were screened across the population, revealing 595 polymorphic bands inherited from IJ76-514. These 595 markers displayed a frequency distribution different from all other sugarcane genetic maps produced, with only 40% being simplex markers (segregated 1:1). Of these 240 simplex markers, 178 were distributed on 47 linkage groups (LGs) and 62 remained unlinked. With the addition of 234 duplex markers and 80 biparental simplex markers (segregating 3:1), 534 markers formed 123 LGs. Using the multi-allelic SSR markers, repulsion phase linkage, and alignment with the Q165 linkage map, 105 of the 123 LGs could be grouped into 10 homology groups (HGs). These 10 HGs were further assigned to the 8 HGs observed in cultivated sugarcane and S. spontaneum. Analysis of repulsion phase linkage indicated that IJ76-514 is neither a complete autopolyploid nor an allopolyploid. Detection of 28 repulsion linkages that occurred between 6 pairs of LGs located in 4 HGs suggested the occurrence of limited preferential chromosome pairing in this species.     

QTL mapping of yield, agronomic and quality traits in tetraploid potato (Solanum tuberosum subsp. tuberosum)

Interval mapping of quantitative trait loci (QTL) for 16 yield, agronomic and quality traits in potato was performed on a tetraploid full-sib family comprising 227 clones from a cross between processing clone 12601ab1 and table cultivar Stirling. Thirty-eight AFLP primer combinations and six SSRs provided 514 informative markers which formed a molecular marker map comprising 12 linkage groups (LGs) in 12601ab1 (nine with four homologous chromosomes) which were aligned with 12 in Stirling (11 with four homologous chromosomes), with four partial groups remaining in 12601ab1. Two LGs were identified unequivocally as chromosomes IV and V and eight others were tentatively assigned with chromosomes VII and X unidentified. All of the traits scored had moderately high heritabilities with 54–92% of the variation in clone means over 3 years and two replicates being due to genetic differences. A total of 39 QTLs were identified. A QTL for maturity was identified on chromosome V which explained 56% of the phenotypic variance, whereas the other QTLs individually explained between 5.4 and 16.5%. However, six QTLs were detected for after-cooking blackening and four for each of regularity of tuber shape, fry colour both after storage at 4 and 10°C and sprouting. Just two QTLs were found for each of yield, the two ‘overall’ scores, crop emergence, tuber size and common scab and just one QTL was detected for each of dry matter content, keeping quality, growth cracks and internal condition. The implications for practical potato breeding and for practical linkage and QTL analysis in autotetraploids are discussed.     

Development of Chromosome-specific Cytogenetic Markers and Merging of Linkage Fragments in Papaya

Carica papaya L. is a tropical and sub-tropical fruit-tree crop with a small genome and nine pairs of chromosomes. The transgenic cultivar ‘SunUp’ has been sequenced and three high-density genetic maps are available for mapping agronomically and economically-important traits. However, the small size and similar morphology of papaya chromosomes hinder their identification and few cytological resources are available for integration of genetic and cytogenetic information. Fluorescence in situ hybridization (FISH) was performed on mitotic metaphase chromosomes using BAC clones harboring mapped simple sequence repeat (SSR) markers as probes. A total of 104 BAC clones covering all 12 linkage groups (LGs) were tested and 12 of them, that gave a single specific signal, were chosen as representative of the 12 LGs of the SSR genetic map. This set of chromosome-specific DNA markers acted as a foundation for papaya chromosome karyotyping and re-assigning orientation of LGs. Chromosome-specific markers allowed us to assign the minor LGs 10, 11, and 12 to major LGs 8, 9, and 7, respectively. We thus reduced the number of LGs in the genetic map to nine, corresponding to the haploid number of papaya chromosomes. We also tested the relative order of DNA markers on minor LGs 10 and 11 to place them on top of LGs 8 and 9 in the correct orientation. Ribosomal DNAs (rDNAs), a set of major cytogenetic markers, were positioned on specific papaya chromosomes. The 25S rDNA showed strong signals at the constriction site of a single pair of chromosomes identified as LG 2 by LG 2-specific BAC clone. The 5S rDNA showed strong signals on two pairs of chromosomes that are syntenic with LG 4- and LG 5-specific BAC clones. This integrated map will facilitate genome assembly, quantitative trait locus (QTL) mapping, and the study of cytological, physical and genetic distance relationships between papaya chromosomes.     

Linkage analysis and identification of quantitative trait loci associated with freeze tolerance and turf quality traits in St. Augustinegrass

St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] is a warm-season turfgrass commonly grown in the southern USA. In this study, the first linkage map for all nine haploid chromosomes of the species was constructed for cultivar ‘Raleigh’ and cultivar ‘Seville’ using a pseudo-F₂ mapping strategy. A total of 160 simple sequence repeat markers were mapped to nine linkage groups (LGs) covering a total distance of 1176.24 cM. To demonstrate the usefulness of the map, quantitative trait loci (QTL) were mapped controlling field winter survival, laboratory-based freeze tolerance, and turf quality traits. Multiple genomic regions associated with these traits were identified. Moreover, overlapping QTL were found for winterkill and spring green up on LG 3 (99.21 cM); turf quality, turf density, and leaf texture on LG 3 (68.57–69.50 cM); and surviving green tissue and regrowth on LGs 1 (38.31 cM), 3 (77.70 cM), 6 (49.51 cM), and 9 (34.20 cM). Additional regions, where QTL identified in both field and laboratory-based/controlled environment freeze testing co-located, provided strong support that these regions are good candidates for true gene locations. These results present the first complete linkage map produced for St. Augustinegrass, providing a template for further genetic mapping. Additionally, markers linked to the QTL identified may be useful to breeders for transferring these traits into new breeding lines and cultivars.     

A Consensus Microsatellite-Based Linkage Map for the Hermaphroditic Bay Scallop (Argopecten irradians) and Its Application in Size-Related QTL Analysis

Bay scallop (Argopecten irradians) is one of the most economically important aquaculture species in China. In this study, we constructed a consensus microsatellite-based genetic linkage map with a mapping panel containing two hybrid backcross-like families involving two subspecies of bay scallop, A. i. irradians and A. i. concentricus. One hundred sixty-one microsatellite and one phenotypic (shell color) markers were mapped to 16 linkage groups (LGs), which corresponds to the haploid chromosome number of bay scallop. The sex-specific map was 779.2 cM and 781.6 cM long in female and male, respectively, whereas the sex-averaged map spanned 849.3 cM. The average resolution of integrated map was 5.9 cM/locus and the estimated coverage was 81.3%. The proportion of distorted markers occurred more in the hybrid parents, suggesting that the segregation distortion was possibly resulted from heterospecific interaction between genomes of two subspecies of bay scallop. The overall female-to-male recombination rate was 1.13∶1 across all linked markers in common to both parents, and considerable differences in recombination also existed among different parents in both families. Four size-related traits, including shell length (SL), shell height (SH), shell width (SW) and total weight (TW) were measured for quantitative trait loci (QTL) analysis. Three significant and six suggestive QTL were detected on five LGs. Among the three significant QTL, two (qSW-10 and qTW-10, controlling SW and TW, respectively) were mapped on the same region near marker AiAD121 on LG10 and explained 20.5% and 27.7% of the phenotypic variance, while the third (qSH-7, controlling SH) was located on LG7 and accounted for 15.8% of the phenotypic variance. Six suggestive QTL were detected on four different LGs. The linkage map and size-related QTL obtained in this study may facilitate marker-assisted selection (MAS) in bay scallop.     

Identification and Validation of Molecular Markers Associated with Pachymetra Root Rot and Brown Rust Resistance in Sugarcane Using Map- and Association-based Approaches

Marker-assisted selection for traits that are difficult to screen for, such as resistance to many sugarcane diseases, has the potential to facilitate the development of improved cultivars in sugarcane. Pachymetra root rot (PRR) and brown rust resistance ratings were obtained over two years for 192 I1 progeny (progeny produced by two heterozygous, non-inbred parental lines) of a sugarcane (Saccharum spp. hybrid) cross between two elite sugarcane clones, Q117 and 74C42. Approximately 1000 single-dose markers, including microsatellite (SSR), amplified fragment length polymorphism (AFLP) and restriction fragment length polymorphism (RFLP) markers, were scored across the population and maps containing approximately 400 markers were constructed for each parent. At p ≤ 0.01, two genomic regions, one from the female Q117 map and a different region from the 74C42 male map, plus an unlinked bi-parental simplex marker (single-dose marker present in both parents) were identified as associated with PRR over both years of data collection. These regions explained between 6 and 16% of the phenotypic variation. An additional region was identified in the female map as associated with PRR at p ≤ 0.01 in one year and p ≤ 0.05 in the second year. This region explained between 4 and 8% of the phenotypic variation. For brown rust, two genomic regions, one from the female map and one from the male map, plus an unlinked marker from both maps, were identified as associated with brown rust resistance at p ≤ 0.01 over two years of phenotypic data. Each region explained between 7 and 18% of the phenotypic variation. Several additional regions were identified in both maps as associated with brown rust at p ≤ 0.01 in one year and p ≤ 0.05 in the second year. These regions also explained between 5 and 11% of the phenotypic variation. To validate these markers and determine whether they would be useful in alternative germplasm, markers from each genomic region associated with PRR or brown rust were screened across a set of 154 elite sugarcane clones; PRR and brown rust ratings were available for 131 and 72 of the clones, respectively. For PRR, three of the 6 markers tested remained significantly associated (p ≤ 0.01) with resistance ratings in the elite clone set. For brown rust, only one of the seven markers tested remained significantly associated (p ≤ 0.01) with resistance in the elite clone set, with one other marker associated at p ≤ 0.05. These results suggest that these markers could be broadly effective in selecting for PRR and/or brown rust resistance in sugarcane breeding programs.     

Mapping of RFLP and qualitative trait loci in Brassica rapa and comparison to the linkage maps of B. napus,B. oleracea,and Arabidopsis thaliana

A linkage map of restriction fragment length polymorphisms (RFLPs) was constructed for oilseed, Brassica rapa, using anonymous genomic DNA and cDNA clones from Brassica and cloned genes from the crucifer Arabidopsis thaliana. We also mapped genes controlling the simply inherited traits, yellow seeds, low seed erucic acid, and pubescence. The map included 139 RFLP loci organized into ten linkage groups (LGs) and one small group covering 1785 cM. Each of the three traits mapped to a single locus on three different LGs. Many of the RFLP loci were detected with the same set of probes used to construct maps in the diploid B. oleracea and the amphidiploid B. napus. Comparisons of the linkage arrangements between the diploid species B. rapa and B. oleracea revealed six LGs with at least two loci in common. Nine of the B. rapa LGs had conserved linkage arrangements with B. napus LGs. The majority of loci in common were in the same order among the three species, although the distances between loci were largest on the B. rapa map. We also compared the genome organization between B. rapa and A. thaliana using RFLP loci detected with 12 cloned genes in the two species and found some evidence for a conservation of the linkage arrangements. This B. rapa map will be used to test for associations between segregation of RFLPs, detected by cloned genes of known function, and traits of interest.     

A combination of AFLP and SSR markers provides extensive map coverage and identification of homo(eo)logous linkage groups in a sugarcane cultivar

Sugarcane varieties are complex polyploids carrying in excess of 100 chromosomes and are derived from interspecific hybridisation between the domesticated Saccharum officinarum and the wild relative S. spontaneum. A map was constructed in Denotes variety covered by Australian plant breeding rights., an Australian cultivar, from a segregating F1 population, using 40 amplified fragment length polymorphism (AFLP) primer combinations, five randomly amplified DNA fingerprints (RAF) primers and 72 simple sequence repeat (SSR) primers. Using these PCR-based marker systems, we generated 1,365 polymorphic markers, of which 967 (71%) were single-dose (SD) markers. Of these SD 967 markers, 910 were distributed on 116 linkage groups (LGs) with a total map length of 9,058.3 cM. Genome organisation was significantly greater than observed in previously reported maps for Saccharum spp. With the addition of 123 double-dose markers, 36 (3:1) segregating markers and a further five SD markers, 1,074 markers were mapped onto 136 LGs. Repulsion phase linkage detected preferential pairing for 40 LGs, which formed 11 LG pairs and three multi-chromosome pairing groups. Using SSRs, double-dose markers and repulsion phase linkage, we succeeded in forming 127 of the 136 LGs into eight homo(eo)logy groups (HG). Two HGs were each represented by two sets of LGs. These sets of LGs potentially correspond to S. officinarum chromosomes, with each set aligning to either end of one or two larger LGs. The larger chromosomes in the two HGs potentially correspond to S. spontaneum chromosomes. This suggestion is consistent with the different basic chromosome number of the two species that are hybridised to form sugarcane cultivars, S. spontaneum (x=8) and S. officinarum (x=10), and illustrates the structural relationship between the genomes of these two species. The discrepancy of coverage between HGs highlights the difficulty in mapping large parts of the genome.     

Construction of an integrated consensus map of the apple genome based on four mapping populations

An integrated consensus genetic map for apple was constructed on the basis of segregation data from four genetically connected crosses (C1?=?Discovery × TN10-8, C2?=?Fiesta × Discovery, C3?=?Discovery × Prima, C4?=?Durello di Forli × Fiesta) with a total of 676 individuals using CarthaGene® software. First, integrated female–male maps were built for each population using common female–male simple sequence repeat markers (SSRs). Then, common SSRs over populations were used for the consensus map integration. The integrated consensus map consists of 1,046 markers, of which 159 are SSR markers, distributed over 17 linkage groups reflecting the basic chromosome number of apple. The total length of the integrated consensus map was 1,032 cM with a mean distance between adjacent loci of 1.1 cM. Markers were proportionally distributed over the 17 linkage groups (χ ²?=?16.53, df?=?16, p?=?0.41). A non-uniform marker distribution was observed within all of the linkage groups (LGs). Clustering of markers at the same position (within a 1-cM window) was observed throughout LGs and consisted predominantly of only two to three linked markers. The four integrated female–male maps showed a very good colinearity in marker order for their common markers, except for only two (CH01h01, CH05g03) and three (CH05a02z, NZ02b01, Lap-1) markers on LG17 and LG15, respectively. This integrated consensus map provides a framework for performing quantitative trait locus (QTL) detection in a multi-population design and evaluating the genetic background effect on QTL expression.     

Identification of quantitative trait loci controlling winter hardiness in an annual × perennial ryegrass interspecific hybrid population

Winter hardiness is a quantitative trait and the lack of it limits geographic distribution of ryegrass. Improving winter hardiness is an important breeding goal in ryegrass breeding programs. An understanding of the genetic basis for the component traits of winter hardiness would allow more efficient selection. A three-generation interspecific population of an annual × perennial ryegrass consisting of 152 progenies was used to map quantitative trait loci (QTL) that control winter hardiness-related traits including fall growth (FG), freezing tolerance (FT), and winter survival (WS) over 2 years. A total of 39 QTL were identified for the three traits from both the female parental (MFA) and the male parental (MFB) maps, of which 13 were for FG, 6 for FT, and 20 for WS. The proportion of phenotypic variation explained by individual QTL ranged from 10.4 to 22.1%. Both FG and FT were positively correlated with WS. Common QTL were detected between FG, FT, and WS. The QTL associated with WS on linkage groups (LGs) 4 and 5, and the QTL for FT on LG 5 were consistently identified over years and maps. These consistent QTL might serve as potential tools for marker-assisted selection to improve ryegrass winter hardiness.     

Both stable and unstable QTLs for resistance to powdery mildew are detected in apple after four years of field assessments

Powdery mildew, caused by the ascomycete fungus Podosphaera leucotricha, is one of the most damaging diseases of apple worldwide. Polygenically determined resistance might contribute to a significant increase of resistance to this disease in new cultivars. A quantitative trait locus (QTL) analysis was performed in an F₁ progeny derived from a cross between the apple cultivar Discovery and the apple hybrid TN10-8. Powdery mildew incidence was assessed during four years (five seasons) in spring and/or autumn in a French local orchard. Seven additive and/or dominant QTLs were detected over the five seasons, with effects (R ²) ranging from 7.5% to 27.4% of the progeny phenotypic variation. Two QTLs, on linkage groups (LGs) 2 and 13, were consistently identified and accounted together from 29% to 37% of the phenotypic variation according to the year of assessment. The other QTLs were identified during one (LGs 1, 14), two (LG10), or three (LGs 8, 17) seasons. Their instability indicated a changing genetic determinism according to the year of assessment, for which several hypotheses may be put forward. The QTLs on LGs 2 and 8 mapped close to clusters of resistance gene analogs (RGAs) and major genes for resistance to mildew or apple scab previously identified. The stable QTLs identified on LGs 2 and 13, together with the strong effect QTL located on LG 8, are of special interest for breeding purposes, especially if combined with other major resistance genes.     

Genetic linkage maps of two interspecific grape crosses (Vitis spp.) used to localize quantitative trait loci for downy mildew resistance

Two populations (Pop) segregating quantitatively for resistance to downy mildew (DM), caused by Plasmopara viticola, were used to construct genetic maps and to carry out quantitative trait locus (QTL) analysis. Pop1 comprised of 174 F₁ individuals from a cross of ‘Moscato Bianco’, a susceptible Vitis vinifera cultivar, and a resistant individual of Vitis riparia. Pop2 consisted of 94 progeny from a cross of two interspecific hybrids, ‘VRH3082 1-42’ and ‘SK77 5/3’, with resistance traits inherited from Vitis rotundifolia and Vitis amurensis, respectively. Resistance of progeny was measured in field and greenhouse conditions by visual evaluation of disease symptoms on leaves. Linkage maps of 1037.2 and 651 cM were built essentially with simple sequence repeat markers and were enriched with gene-derived single-strand conformational polymorphism and single-nucleotide polymorphism markers. Simple interval mapping and Kruskall–Wallis analysis detected a stable QTL involved in field resistance to DM on linkage group (LG) 7 of the Pop1 integrated map co-localized with a putative Caffeoyl-CoA O-methyltransferase-derived marker. Additional QTLs were detected on LGs 8, 12 and 17. We were able to identify genetic factors correlated with resistance to P. viticola with lower statistical significance on LGs 1, 6 and 7 of the Pop2 map. Finally, no common QTLs were found between the two crosses analyzed. A search of the grapevine genome sequence revealed either homologues to non-host-, host- or defense-signalling genes within the QTL intervals. These positional candidate genes may provide new information about chromosomal regions hosting phenotypic loci.     

Primary genome scan for complex body shape‐related traits in the common carp Cyprinus carpio

To identify quantitative trait loci (QTL) that affect body shape in common carp Cyprinus carpio, a linkage map, 2159·23 cM long, was constructed with a total of 307 markers covering 51 linkage groups (LG). The map included 167 new single nucleotide polymorphism (SNP) markers derived from expressed sequence tags (EST) together with 140 microsatellite markers reported earlier. A primary genome scan was conducted for QTL for standard length (L_S), head length (L_H), body height (H_B), body width (W_B) and tail length (L_TAIL) in an F1 line containing 92 offspring. A total of 15 suggestive QTL on six LGs were found to associate with L_S, L_H, H_B, W_B and L_TAIL which explained 10·7–17·4% of the variance. Five significant QTL were detected for body‐shape related traits and located for LGs (lg1, 12 and 20). These QTL included: one associated with L_S (21·1% variance explained), three for H_B (almost 20% variance explained) and one for W_B (20·7% variance explained).     

Mapping minor QTL for increased stearic acid content in sunflower seed oil

Increased stearic acid (C18:0) content in the seed oil of sunflower would improve the oil quality for some edible uses. The sunflower line CAS-20 (C18:0 genotype Es1Es1es2es2), developed from the high C18:0 mutant line CAS-3 (C18:0 genotype es1es1es2es2; 25% C18:0), shows increased C18:0 levels in its seed oil (8.6%). The objective of this research was to map quantitative trait loci (QTL) conferring increased C18:0 content in CAS-20 in an F₂ mapping population developed from crosses between HA-89 (wild type Es1Es1Es2Es2; low C18:0) and CAS-20, which segregates independently of the macromutation Es1 controlling high C18:0 content in CAS-3. Seed oil fatty acid composition was measured in the F₂ population by gas-liquid chromatography. A genetic linkage map of 17 linkage groups (LGs) comprising 80 RFLP and 19 SSR marker loci from this population was used to identify QTL controlling fatty acid composition. Three QTL affecting C18:0 content were identified on LG3, LG11, and LG13, with all alleles for increased C18:0 content inherited from CAS-20. In total, these QTL explained 43.6% of the C18:0 phenotypic variation. Additionally, four candidate genes (two stearate desaturase genes, SAD6 and SAD17, and a FatA and a FatB thioesterase gene) were placed on the QTL map. On the basis of positional information, QTL on LG11 was suggested to be a SAD6 locus. The results presented show that increased C18:0 content in sunflower seed oil is not a simple trait, and the markers flanking these QTL constitute a powerful tool for plant breeding programs.     

Mapping quantitative trait loci for a common bean (Phaseolus vulgaris L.) ideotype.

Breeding a model plant that encompasses individual traits thought to enhance yield potential, known as ideotype breeding, has traditionally focused on phenotypic selection of plants with desirable morphological traits. Broadening this breeding method to the molecular level through the use of molecular markers would avoid the environmental interactions associated with phenotypic selection. A population of 110 F5 recombinant inbred lines (RILs), derived from the cross between WO3391 and 'OAC Speedvale', was used to develop a genetic linkage map consisting of 105 random amplified polymorphic DNA (RAPD), simple sequence repeat (SSR), and sequence-tagged site (STS) markers. The map has a total length of 641 cM distributed across 8 linkage groups (LGs). Five of them were aligned on the core linkage map of bean. Twenty-one quantitative trait loci (QTLs) were identified over three environments for eight agronomic and architectural traits previously defined for a bean (Phaseolus vulgaris L.) ideotype. The QTLs were mapped to seven LGs with several regions containing QTLs for multiple traits. At least one QTL was located for each trait and a maximum of four were associated with lodging. Total explained phenotypic variance ranged from 10.6% for hypocotyl diameter to 45.4% for maturity. Some of the QTLs identified will be useful for early generation selection of tall, upright, high-yielding lines in a breeding program.     

Use of Random Amplified Polymorphic DNA Markers for Mapping the Chickpea Genome

Three interspecific crosses were developed using Cicer arietinum (ICC 4918) as the female parent and wild Cicer species [C. reticulatum - JM 2100, JM 2106 and C. echinospermum - ICCW 44] as the male parent. Cicer arietinum (ICC 4918) × C. reticulatum (JM 2100) cross produced the largest number of F₂ plants and was chosen for linkage mapping using Random Amplified Polymorphic DNA (RAPD) primers. A partial linkage map was constructed based upon the segregation of 36 RAPD markers obtained by amplification using 35 primers. The linkage map consists of two linkage groups with 17 linked markers covering a total of 464.9 cM. Analyses also revealed association of three morphological traits with linked RAPD markers. Out of seven morphological traits tested for association with linked markers in the segregating plants, four Quantitative trait loci (QTL) were detected for the trait leaf length and three QTLs each for the traits leaf width and erect plant habit.