Spatial and temporal distribution of solutes in the developing carrot taproot measured at single-cell resolution

The time-course and spatial distribution of sugars and ions in carrot (Daucus carota L.) was studied at fine resolution using single cell (SiCSA) and tissue analysis. Four phases of osmolyte accumulation in the taproot were identified: an amino acid (germination) phase, when internal sources of amino acids provide seedlings with osmotica; an ion phase, when inorganic and organic ions were the main solutes; a hexose phase, when concentrations of glucose and fructose sharply increased and reached their maximum; and a sucrose phase, when sucrose became the major solute. Spatial distribution of sugar in taproot cells showed a general trend of highest concentration on both sides of the vascular cambium (some 200 mM sucrose, 150 mM glucose) and a minimum in the pith (some 100 mM sucrose, 60 mM glucose) and in periderm. Electrolytes (e.g. potassium) followed a distribution generally reciprocal to that of sugars; minimum in the tissue adjacent to the cambium (some 10 mM) and maximum in the pith and periderm (some 60-100 mM). The cambial cells contained unexpectedly low concentrations of sugars and potassium. These spatial and temporal patterns indicate that amino acids, other electrolytes and sugars are interchangeable in the tissue osmotic balance. The nature of the solute is developmentally determined both temporally and spatially. During the accumulation of electrolytes following the initial amino acid phase, osmotic pressure to 420 mosmol kg-1 rises and then remains constant despite large changes in the concentration of individual solutes. This indicates that osmotic pressure is regulated independently of the individual concentrations of solutes.     

植物生理学研究中的压力探针技术

压力探针技术是一种用来测定微系统中压力大小和变化的新技术。其最初被设计用于直接测定巨型藻类的细胞膨压。随着操作装置的进一步微型化和精密化, 后来被应用于测定普通高等植物细胞膨压及其它水分关系参数。该技术的发展建立在一系列相应的流体物理学理论基础上。通过这些物理学公式的计算, 该技术能测定跨细胞膜或器官的水分运输速度以及它们的水力学导度; 测定溶液中水分和溶质的相对运输速度以及它们之间的相互影响; 还可以测定细胞壁的刚性等。目前压力探针技术已成为植物生理学和生态学领域研究中的多用途技术。它可以在细胞水平上原位测定水分及溶质跨膜运输及分布情况, 这对于阐明水通道功能具有极其重要的意义。此外, 木质部压力探针技术是目前唯一可以直接测定导管或管胞中负压的工具。该技术还可以用于单细胞汁液的样品采集, 结合微电极技术测定导管或其它细胞中的pH值、离子浓度以及细胞膜电位。本文重点介绍该技术使用的基本原理和相应的理论基础, 并详细地描述了操作过程中的技术和技巧。     

Recent advances in single-cell analysis using capillary electrophoresis and microfluidic devices

Cells are the fundamental unit of life, and studies on cell contribute to reveal the mystery of life. However, since variability exists between individual cells even in the same kind of cells, increased emphasis has been put on the analysis of individual cells for getting better understanding on the organism functions. During the past two decades, various techniques have been developed for single-cell analysis. Capillary electrophoresis is an excellent technique for identifying and quantifying the contents of single cells. The microfluidic devices afford a versatile platform for single-cell analysis owing to their unique characteristics. This article provides a review on recent advances in single-cell analysis using capillary electrophoresis and microfluidic devices; focus areas to be covered include sampling techniques, detection methods and main applications in capillary electrophoresis, and cell culture, cell manipulation, chemical cytometry and cellular physiology on microfluidic devices.     

The use of capillary electrophoresis in a micropreparative mode: methods and applications.

The ability to collect sufficient quantities of analytes from capillary electrophoresis for subsequent analyses is demonstrated. Fractions collected have been analyzed using the following techniques: capillary electrophoresis, mass spectrometry, and protein sequencing. Fractions can be collected directly into small volumes of buffer or directly onto membrane surfaces. Relevant parameters such as capillary diameter, mass loading, and separation parameters are addressed.     

Analysis of Intracellular Nucleotides by Capillary Electrophoresis–Mass Spectrometry

A pilot study using capillary electrophoresis with mass spectrometry for the analysis of nucleotides in human erythrocytes is presented. Erythrocytes were incubated with 5-amino-4-imidazolecarboxamide riboside in order to mimic situation in defect of purine metabolism—AICA-ribosiduria. Characteristic AICA-ribotides together with normal nucleotides were separated by capillary electrophoresis in acetate buffer (20 mmol/L, pH 4.4) and identified on line by mass spectrometry.     

蛋白质组分析技术进展

蛋白质组是指某一物种、个体、器官、组织、细胞乃至体液在精确控制其环境条件之下,特定时刻的全部蛋白质表达图谱。继基因组之后,综的研究即将成为分子生物学的研究热点,蛋白质组研究中常用分离分析技术包括样品制备,双向凝胶电泳,毛细管电泳,色谱技术和质谱技术。双向凝胶电泳是在较短时间内分离大量蛋白质组分,提供足够分离空间的比较成熟的方法。各种分离技术的连用和分析过程的自动化将是蛋白质组研究技术的发展方向。     

Advances of infrared spectroscopy in natural product research

Natural product's properties are related to certain classes of compounds such as alkaloids, flavonoids, essential oils and others. Traditionally, separation techniques including thin layer chromatography (TLC), liquid chromatography (LC), gas chromatography (GC) and capillary electrophoresis (CE) even hyphenated to mass spectrometry (MS) were used for the elucidation, qualitative and quantitative analysis of individual compounds.In food industry, spectroscopic investigations using infrared radiation have been used to monitor and evaluate the composition and quality already since the early sixties. During the last four decades near-infrared spectroscopy (NIR; 800–2500 nm; 12,500–4000 cm⁻¹) has become one of the most attractive and used methods for analysis for the following reasons: it represents a non-invasive analytical tool allowing a fast and simultaneous qualitative and quantitative characterization of natural products and their constituents. Additionally, the development of custom-made hand-held instruments enables in-field measurement for determining the optimum harvest time.Attenuated total reflection (ATR) and Fourier transform infrared (FTIR) spectroscopic imaging are suitable not only for the differentiation of different plant species, but also to distinct various ingredients within a plant. FTIR spectroscopic microscopy enables molecular imaging of complex botanical samples and therefore the detection and characterization of the molecular components of biological tissue.In the present contribution, the principle, technique and methodology of the different infrared spectroscopic methods are described followed by a discussion of quantitative and qualitative application possibilities in the field of natural product analysis.     

Analytical methods to determine phytoestrogenic compounds

The analytical methods for the determination of phytoestrogenic compounds in edible plants, plant products and biological matrices are reviewed. The detection, qualitative and quantitative methods based on different chromatographic separations of gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE) coupled with various detections by ultraviolet absorption (UV), electrochemical detection (ED), fluorescence detection, mass spectrometry (MS) and nuclear magnetic resonance spectroscopy (NMR), as well as non-chromatographic immunoassay are each extensively examined and compared. An overview on phytoestrogen chemistry, bioactivities and health effects, plant precursors, metabolism and sample preparation is also presented.     

Determination of immunoreactive gonadotropin-releasing hormone in serum and urine by on-line immunoaffinity capillary electrophoresis coupled to mass spectrometry

The need for urgent diagnoses has propelled the development of automated analyses that can be performed in a short time at reasonable cost. One such method is immunoaffinity capillary electrophoresis. This emerging hybrid technology employs two powerful techniques coupled on-line for the direct and rapid determination of analytes present in biological fluids. The first technique, immunoaffinity, is used for the selective extraction of a molecule present in a complex matrix, utilizing a microscale-format chamber affinity device. An analyte (affinity target) present in serum or urine is captured by an immobilized molecular recognition antibody molecule (affinity ligand) bound to a solid support constituent (glass beads or an appropriate porous structure) of a microchamber affinity device. The second technique, capillary electrophoresis, is used for the high-resolution analytical separation of the purified and concentrated affinity target material after elution from the microchamber affinity device. In this work, immunoaffinity capillary electrophoresis was developed for the identification and characterization of a single constituent of a complex matrix. Immunoreactive gonadotropin-releasing hormone was determined in serum and urine specimens derived from a normal individual and from a patient suffering from benign prostatic hyperplasia. Furthermore, the on-line immuno-separation system was coupled in tandem to mass spectrometry to obtain molecular mass information of the affinity isolated and CE separated neuropeptide. This hybrid immuno-analytical technology is simple, rapid, selective and sensitive. In addition, an attempt was also made to characterize other urinary constituents by CE–MS that may lead to marker activity in the urine of the diseased subject. The hyphenation of analytical techniques has proved valuable in enhancing their individual features. The future of bioanalysis using miniaturized affinity systems is discussed in this paper.     

Use of atmospheric pressure ionization mass spectrometry in enantioselective liquid chromatography

Recent advances in mass spectrometry have rendered it an attractive and versatile tool in industrial and academic research laboratories. As a part of this rapid growth, a considerable body of literature has been devoted to the application of mass spectrometry in studies involving enantioselectivity, molecular recognition, and supramolecular chemistry. In concert with separation techniques such as capillary electrophoresis and liquid chromatography, mass spectrometry allows rapid characterization of a large array of molecules in complex mixtures. A majority of these findings have been made possible by the introduction of 'soft-ionization' techniques such as electrospray ionization interface. Other techniques such as atmospheric pressure chemical ionization mass spectrometry have been widely used as a rugged interface for quantitative liquid chromatography-mass spectrometry. Herein, we present a brief overview of the above techniques accompanied with several examples of enantioselective capillary electrophoresis- and liquid chromatography-mass spectrometry in drug discovery and development. Although the emphasis of this article is on quantitative enantiomeric chromatography-mass spectrometry, we envisage that similar strategies are adaptable in qualitative studies.     

FTICR-mass spectrometry for high-resolution analysis in combinatorial chemistry

The diversity of compound collections required for finding lead structures in pharmaceutical research can be provided by means of combinatorial organic chemistry. The resultant enormous number of single compounds but also of compound mixtures represents a challenge for the analyst. With the introduction of Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS or FT-MS), a new and, as yet, not widespread mass spectrometric technique (a means of analysis of such compound libraries with a very high mass resolution) high mass accuracy and high sensitivity has become available. Moreover, in combination with electrospray ionization (ESI), not only high-throughput measurements via flow-injection analysis (FIA) but also coupling with separation techniques such as high-performance liquid chromatography (HPLC) or capillary electrophoresis (CE) is possible. Structural verification by way of decomposing ions (MS(n); n > or = 2) using a variety of different dissociation techniques can be performed by FTICR-MS. This is the first review specifically covering applications of FTICR-MS in the field of combinatorial chemistry.     

Advances in the analysis of single mitochondria

Mitochondria are both morphologically and functionally diverse, and this variety is thought to have important biological ramifications. The development of methods to probe the properties of individual mitochondria is therefore of utmost importance. Recent advances have been made using in situ microscopy techniques and methods to investigate isolated mitochondria, including flow cytometry, capillary electrophoresis, patch-clamping and optical trapping. Such techniques have been used to study metabolism, mitochondrial calcium homeostasis, mitochondrial membrane potential, apoptosis, and other properties.     

Preparative capillary electrophoresis based on adsorption of the solutes (proteins) onto a moving blotting membrane as they migrate out of the capillary.

A micropreparative capillary electrophoresis apparatus equipped with a new type of fraction collection device is described: solutes, such as proteins, are adsorbed onto a moving blotting membrane (for instance a polyvinylidene difluoride membrane) as they migrate electrophoretically out of the capillary. The adsorbed proteins are visualized by conventional protein staining methods or by fluorescent labeling. Specific identification of separated components by an immunological technique is demonstrated. The method also offers the potential to analyze proteins and peptides collected on the membrane by gas phase sequencing and mass spectrometry.     

Approach to analysis of single nucleotide polymorphisms by automated constant denaturant capillary electrophoresis

Melting gel techniques have proven to be amenable and powerful tools in point mutation and single nucleotide polymorphism (SNP) analysis. With the introduction of commercially available capillary electrophoresis instruments, a partly automated platform for denaturant capillary electrophoresis with potential for routine screening of selected target sequences has been established. The aim of this article is to demonstrate the use of automated constant denaturant capillary electrophoresis (ACDCE) in single nucleotide polymorphism analysis of various target sequences. Optimal analysis conditions for different single nucleotide polymorphisms on ACDCE are evaluated with the Poland algorithm. Laboratory procedures include only PCR and electrophoresis. For direct genotyping of individual SNPs, the samples are analyzed with an internal standard and the alleles are identified by co-migration of sample and standard peaks.In conclusion, SNPs suitable for melting gel analysis based on theoretical thermodynamics were separated by ACDCE under appropriate conditions. With this instrumentation (ABI 310 Genetic Analyzer), 48 samples could be analyzed without any intervention. Several institutions have capillary instrumentation in-house, thus making this SNP analysis method accessible to large groups of researchers without any need for instrument modification.     

N-linked oligosaccharide structures in the diamine oxidase from porcine kidney

Structures of the N-linked glycans released from porcine kidney diamine oxidase (DAO) were characterized utilizing various analytical techniques, including matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOF-MS), high-performance capillary electrophoresis (HPCE), and high-pH anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). The oligosaccharide sequences present in DAO were conclusively determined using specific exoglycosidases in conjunction with MALDI/TOF-MS. The structures found in the glycoprotein are primarily linear, di-, or tribranched fucosylated complex type. MS analysis of the esterified N-glycan pool derived from DAO indicated the presence of several di- and trisialylated structures.     

Near infrared spectroscopy compared to liquid chromatography coupled to mass spectrometry and capillary electrophoresis as a detection tool for peptide reaction monitoring

Peptide interaction is normally monitored by liquid chromatography (LC), liquid chromatography coupled to mass spectrometry (LC-MS), mass spectrometric (MS) methods such as MALDI-TOF/MS or capillary electrophoresis (CE). These analytical techniques need to apply either high pressure or high voltages, which can cause cleavage of newly formed bondages. Therefore, near infrared reflectance spectroscopy (NIRS) is presented as a rapid alternative to monitor the interaction of glutathione and oxytocin, simulating physiological conditions. Thereby, glutathione can act as a nucleophile with oxytocin forming four new conjugates via a disulphide bondage. Liquid chromatography coupled to UV (LC-UV) and mass spectrometry via an electrospray ionisation interface (LC-ESI-MS) resulted in a 82% and a 78% degradation of oxytocin at pH 3 and a 5% and a 7% degradation at pH 6.5. Capillary electrophoresis employing UV-detection (CE-UV) showed a 44% degradation of oxytocin. LC and CE in addition to the NIRS are found to be authentic tools for quantitative analysis. Nevertheless, NIRS proved to be highly suitable for the detection of newly formed conjugates after separating them on a thin layer chromatography (TLC) plate. The recorded fingerprint in the near infrared region allows for a selective distinct qualitative identification of conjugates without the need for expensive instrumentation such as quadrupole or MALDI-TOF mass spectrometers. The performance of the established NIRS method is compared to LC and CE; its advantages are discussed in detail.     

Differential polypeptide display: the search for the elusive target

Proteomics, as a tool to identify proteins in biological samples, is gaining rapidly importance in the postgenomic era. Here we discuss the current and potential role of different techniques in the field of proteomics such as two-dimensional gel electrophoresis off-line coupled to MALDI-MS (2D-PAGE-MALDI-MS), high performance liquid chromatography mass spectrometry (HPLC-MS), surface enhanced laser desorption/ionization mass spectrometry (SELDI-MS) and a newly developed technique, capillary electrophoresis mass spectrometry (CE-MS). The developments of the last years are presented discussed.     

Investigation of the in vitro biotransformation of R-(+)-thalidomide by HPLC, nano-HPLC, CEC and HPLC–APCI-MS

High-performance liquid chromatography (HPLC), nano-HPLC, capillary electrochromatography (CEC) and on-line HPLC–atmospheric pressure chemical ionization mass spectrometry (APCI-MS) techniques were used for the identification and detailed characterization of two new metabolites of the former sedative drug thalidomide (TD). The advantages of nano-HPLC and CEC are higher peak efficiency and a drastic decrease in the analysis time, which, together with lower sample dilution during the analyses, allowed to obtain a detection sensitivity that was comparable to HPLC with common-sized columns. Both, nano-HPLC and CEC could be realized in the commercially available capillary electrophoresis system HP^3D. On-line HPLC–APCI-MS coupling is a very useful technique for the rapid identification of metabolites without any need for reference compounds.     

A yeast metabolite extraction protocol optimised for time-series analyses

There is an increasing call for the absolute quantification of time-resolved metabolite data. However, a number of technical issues exist, such as metabolites being modified/degraded either chemically or enzymatically during the extraction process. Additionally, capillary electrophoresis mass spectrometry (CE-MS) is incompatible with high salt concentrations often used in extraction protocols. In microbial systems, metabolite yield is influenced by the extraction protocol used and the cell disruption rate. Here we present a method that rapidly quenches metabolism using dry-ice ethanol bath and methanol N-ethylmaleimide solution (thus stabilising thiols), disrupts cells efficiently using bead-beating and avoids artefacts created by live-cell pelleting. Rapid sample processing minimised metabolite leaching. Cell weight, number and size distribution was used to calculate metabolites to an attomol/cell level. We apply this method to samples obtained from the respiratory oscillation that occurs when yeast are grown continuously.