Determination of the enantiomerization energy barrier of some 3-hydroxy-1,4-benzodiazepine drugs by supercritical fluid chromatography

In this study, nucleotide adsorption-desorption behaviour of boronic acid-carrying uniform, porous particles was investigated. The particles were produced by a "multi-step microsuspension polymerization" in the form of poly(styrene-vinylphenyl boronic acid-divinylbenzene) terpolymer. In the first step of the production method, uniform polystyrene latex particles (6.2 microm in size) were obtained by dispersion polymerization. These particles were first swollen by a low molecular mass organic agent (i.e. dibutylphthalate, DBP) and then by a monomer mixture including styrene (S), 4-vinylphenyl boronic acid (VPBA) and divinylbenzene (DVB). The particle uniformity was protected in both swelling stages by adjusting DBP/polystyrene latex and monomer mixture/polystyrene latex ratios. Polymerization of the monomer mixture in the swollen seed particles provided boronic acid-carrying uniform, porous particles 11-12 microm in size. To have uniform particles with different porosities and boronic acid contents, the feed concentration of boronic acid-carrying monomer and the monomer/seed latex ratio were changed. The particles were tried as sorbent for the adsorption of a model nucleotide (i.e., beta-nicotinamide adenine dinucleotide, beta-NAD). In the beta-NAD adsorption experiments, the maximum equilibrium adsorption was obtained at pH 8.5 which was very close to pKa of boronic acid. The incorporation of boronic acid functionality provided a significant increase in the beta-NAD adsorption. In contrast to plain poly(styrene-co-divinylbenzene) particles, four-fold higher beta-NAD adsorption was obtained with the boronic acid functionalized particles. Beta-NAD was desorbed from the particles with the yields higher than 90% by weight.     

Design of polypeptide-functionalized polystyrene microspheres

In this contribution, the principle of spontaneous surface segregation has been applied for the preparation of polypeptide-functionalized polystyrene microspheres. For that purpose, an amphiphilic diblock copolymer was introduced in the mixture styrene/divinylbenzene and polymerized using AIBN as initiator. During the polymerization, cross-linked particles were obtained in which the diblock copolymer was encapsulated. The amphiphilic diblock copolymers used throughout this study contain a hydrophilic polypeptide segment, either poly(L-lysine) or poly(L-glutamic acid) and a hydrophobic polystyrene block. After 4 h of polymerization, rather monodisperse particles with sizes of approximately 3-4 microm were obtained. Upon annealing in hot water, the hydrophilic polypeptides migrate to the interface, hence, either positively charged or neutral particles were obtained when poly(L-lysine) is revealed at the surface and exposed to acidic or basic pH, respectively. On the opposite, negatively charged particles were achieved in basic pH water by using poly(L-glutamic acid) as additive. The surface chemical composition was modified by changing the environment of the particles. Thus, exposure in toluene provoked a surface rearrangement, and due to its affinity, the polystyrene block reorients toward the interface.     

Synthesis of molecularly imprinted polymers using a functionalized initiator for chiral-selective recognition of propranolol

We present a new concept of synthesis for preparation of molecularly imprinted polymers using a functionalized initiator to replace the traditional functional monomer. Using propranolol as a model template, a carboxyl-functionalized radical initiator was demonstrated to lead to high-selectivity polymer particles prepared in a standard precipitation polymerization system. When a single enantiomer of propranolol was used as template, the imprinted polymer particles exhibited clear chiral selectivity in an equilibrium binding experiment. Unlike the previous molecular imprinting systems where the active free radicals can be distant from the template-functional monomer complex, the method reported in this work makes sure that the actual radical polymerization takes place in the vicinity of the template-associated functional groups. The success of using functional initiator to synthesize molecularly imprinted polymers brings in new possibilities to improve the functional performance of molecularly imprinted synthetic receptors.     

Galactose-decorated cross-linked biodegradable poly(ethylene glycol)-b-poly(ε-caprolactone) block copolymer micelles for enhanced hepatoma-targeting delivery of paclitaxel

The inferior in vivo stability of micellar drugs has been a prime challenge for their application in targeted drug delivery. Here we report on novel galactose-decorated covalently cross-linked biodegradable micelles based on photo-cross-linkable poly(ethylene glycol)-b-poly(acryloyl carbonate)-b-poly(ε-caprolactone) (PEG-PAC-PCL) and galactose-conjugated PEG-PCL (Gal-PEG-PCL) copolymers for enhanced hepatoma-targeting delivery of paclitaxel (PTX). The molecular weight of PEG in Gal-PEG-PCL was higher than that in PEG-PAC-PCL, thereby fully exposing Gal ligands at the micellar surface. These micelles, either with or without loading of PTX, were readily cross-linked by UV irradiation to afford micelles with small sizes (ca. 79-94 nm) and enhanced stability. The in vitro release studies confirmed that drug release from cross-linked micelles was significantly inhibited. Interestingly, MTT assays showed that Gal-decorated PTX-loaded cross-linked micelles retained a high antitumor activity in HepG2 cells, which was much more effective than PTX-loaded cross-linked micelles without Gal ligands and comparable to Gal-decorated PTX-loaded non-cross-linked micelles. Remarkably, the preliminary in vivo antitumor efficacy studies in SMMC-7721 tumor (human hepatoma)-bearing nude mice revealed that Gal-decorated PTX-loaded cross-linked micelles inhibited the growth of the human hepatoma more effectively than PTX-loaded cross-linked micelles as well as Gal-decorated PTX-loaded non-cross-linked micelles. These results indicate that Gal-decorated cross-linked PEG-PCL micelles have great potential in liver tumor-targeted chemotherapy.     

Solid-phase synthesis of polynucleotides. IV. Usage of polystyrene resins for the synthesis of polydeoxyribonucleotides by the phosphostriester method.

Contrary to the expectation, the Merrifield polystyrene resin, 2% cross-linked by divinylbenzene, is as efficient as the polyacrylmorpholide resin for the synthesis of polydeoxyribonucleotides using a phosphotriester method. On the Merrifield resin, the tetradecamer, dTpCpGpTpCpApApCpTpGpGpCpTpT, and the hexadecamer, dCpCpApGpTpCpApCpGpApCpGpTpTpGpT, were synthesized by the phosphotriester method using di and trinucleotide blocks as coupling units.     

Photoinitiated cross-linking of the biodegradable polyester poly(propylene fumarate). Part I. Determination of network structure

In this work, we investigated the mechanism involved in the photoinitiated cross-linking of the polyester poly(propylene fumarate) (PPF) using the initiator bis(2,4,6-trimethylbenzoyl) phenylphosphine oxide (BAPO). It was hypothesized that BAPO has the ability to cross-link PPF into solid polymer networks, without the use of a cross-linking monomer, because two pairs of radicals, both involving a fast adding phosphinoyl radical, were formed upon UV irradiation of BAPO. Spectroscopic investigation first confirmed the addition of BAPO derived radicals to the PPF olefin. Investigations of fumarate conversion and bulk network properties were then undertaken, using the BAPO initiator and a monoacylphosphine oxide (MAPO) initiator which contains a single photolabile bond. Results show that a single BAPO phosphinoyl radical was primarily responsible for the formation of a highly cross-linked PPF network and the additional radical pair which may be formed does not dramatically alter fumarate conversion or bulk network properties. From these results, the network structure of BAPO initiated, photo-cross-linked PPF may be deduced. Finally, this study demonstrates a method for inferring cross-linked network structures by contrasting properties of bulk materials formed from similar cross-linking initiators.     

Synthesis and characterization of biocompatible thermo-responsive gelators based on ABA triblock copolymers

The synthesis of biocompatible, thermo-responsive ABA triblock copolymers in which the outer A blocks comprise poly(N-isopropylacrylamide) and the central B block is poly(2-methacryloyloxyethyl phosphorylcholine) is achieved using atom transfer radical polymerization with a commercially available bifunctional initiator. These novel triblock copolymers are water-soluble in dilute aqueous solution at 20 degrees C and pH 7.4 but form free-standing physical gels at 37 degrees C due to hydrophobic interactions between the poly(N-isopropylacrylamide) blocks. This gelation is reversible, and the gels are believed to contain nanosized micellar domains; this suggests possible applications in drug delivery and tissue engineering.     

N(4)C-alkyl-N(4)C cross-linked DNA: bending deformations in duplexes that contain a -CNG- interstrand cross-link

Short DNA duplexes containing a 1,3-N(4)C-alkyl-N(4)C interstrand cross-link that joins the two C residues of a -CNG- sequence were prepared using either a phosphoramidite or convertible nucleoside approach. The alkyl cross-link consists of 2, 4, or 7 methylene groups. The duplexes, which contain a seven-base-pair core and A(3)/T(3) complementary 3'-overhanging ends, were characterized by enzymatic digestion and MALDI-TOF mass spectrometry. Ultraviolet thermal denaturation studies showed that the duplexes denature in a cooperative manner and that the length of the cross-link affects the thermal stability. Thus, the transition temperature of the ethyl cross-linked duplex, 42 degrees C, is 16 degrees C higher than the melting temperature of the corresponding non-cross-linked control, whereas the transition temperatures of the butyl and heptyl cross-linked duplexes, 73 and 72 degrees C, respectively, are 46-47 degrees C higher. The reduced molecularity of denaturation of the cross-linked duplexes versus melting of the non-cross-linked duplex most likely accounts for these differences. Examination of molecular models suggests that the ethyl cross-link is too short to span the distance between the two C residues at the site of the cross-link in B-form DNA without causing distortion of the helix, whereas less and no distortion would be expected for the butyl and heptyl cross-links, respectively. The circular dichroism spectra, which show greatest deviation in the ethyl cross-linked duplex from B-form DNA, are consistent with this expectation. Anomalous mobilities on native polyacrylamide gels of multimers produced by self-ligation of each of the cross-linked duplexes suggest that the ethyl and butyl cross-linked duplexes undergo bending deformations, whereas multimers derived from the heptyl cross-linked duplex migrated normally. The bending angle was estimated to be 20 degrees, 13 degrees, and 0 degrees for the ethyl, butyl, and heptyl cross-linked duplexes, respectively. Thus, it appears that the degree of bending in these N(4)C-alkyl-N(4)C cross-linked duplexes is controlled by the length of the cross-link.     

Growth of human stem cell-derived neurons on solid three-dimensional polymers

Understanding neural differentiation and the development of complex neurite networks in three-dimensional matrices is critical for neural tissue engineering in vitro. In this study we describe for the first time the growth of human stem cell-derived neurons on solid polystyrene matrices coated with bioactive molecules. Highly porous foams were prepared from poly(styrene/divinylbenzene) using a high internal phase emulsion (HIPE) as a template to create the porous structure. The resulting polyHIPE matrices were readily coated with aqueous-based solutions including poly-d-lysine and laminin. Human neurons adhered well to poly-d-lysine coated surfaces and extended neural processes, however, neurite outgrowth was particularly enhanced when polymers also received a coating of laminin. These data clearly demonstrate the potential use of solid polystyrene scaffolds to create three-dimensional environments for cell growth and differentiation. We propose that these robust and stable matrices can be conveniently and routinely used in the tissue culture laboratory to study the behaviour of cells grown in three-dimensions.     

Block copolymerization of α-amino acid N-carboxyanhydride initiated by vinyl polymers having a terminal amino group and the characterization of the block copolymers

Poly(methyl methacrylate) and polystyrene having terminal amino groups were synthesized by the radical polymerization of those monomers in the presence of 2-mercaptoethylammonium chloride as a chain-transfer agent. By the terminal group analysis and the molecular weight determination of the polymers, 0.5–1.3 amino groups were found in a chain of poly(methyl methacrylate) and 0.5–2.5 amino groups in a chain of polystyrene. Using these polymers having a terminal amino group as an initiator, the block polymerization of α-amino acid N-carboxyanhydride (NCA) was carried out. In the polymerizations of Glu(OBzl) NCA and Lys(Z) NCA by the poly(methyl methacrylate) initiator, the terminal amino group underwent a nucleophilic addition reaction to NCA and initiated the polymerization, yielding A-B-type block copolymers in a high yield. The same was observed in the polymerizations of Gly(OBzl) NCA and Lys(Z) NCA by the polystyrene initiator. By eliminating the protecting groups of the side chains of the polypeptide segment, the block copolymers poly(methyl methacrylate)-poly(Glu), poly(methyl methacrylate)-poly(Lys), polystyrene-poly(Glu) and polystyrene-poly(Lys) were synthesized with little side reactions. The side chain amino groups of poly(Lys) segment in the poly(methyl methacrylate)-poly(Lys) block copolymers were sulphonated or stearoylated successfully.     

Synthesis of soluble phosphate polymers by RAFT and their in vitro mineralization

Soluble linear (non-cross-linked) poly(monoacryloxyethyl phosphate) (PMAEP) and poly(2-(methacryloyloxy)ethyl phosphate) (PMOEP) were successfully synthesized through reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization and by keeping the molecular weight below 20 K. Above this molecular weight, insoluble (cross-linked) polymers were observed, postulated to be due to residual diene (cross-linkable) monomers formed during purification of the monomers, MOEP and MAEP. Block copolymers consisting of PMAEP or PMOEP and poly(2-(acetoacetoxy)ethyl methacrylate) (PAAEMA) were successfully prepared and were immobilized on aminated slides. Simulated body fluid studies revealed that calcium phosphate (CaP) minerals formed on both the soluble polymers and the cross-linked gels were very similar. Both the PMAEP polymers and the PMOEP gel showed a CaP layer most probably brushite or monetite based on the Ca/P ratios. A secondary CaP mineral growth with a typical hydroxyapatite (HAP) globular morphology was found on the PMOEP gel. The soluble PMOEP film formed carbonated HAP according to Fourier transform infrared (FTIR) spectroscopy. Block copolymers attached to aminated slides showed only patchy mineralization, possibly due to the ionic interaction of negatively charged phosphate groups and protonated amines.     

The tumor necrosis factor-related apoptosis-inducing ligand receptors TRAIL-R1 and TRAIL-R2 have distinct cross-linking requirements for initiation of apoptosis and are non-redundant in JNK activation

Overexpression of the tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) receptors, TRAIL-R1 and TRAIL-R2, induces apoptosis and activation of NF-kappaB in cultured cells. In this study, we have demonstrated differential signaling capacities by both receptors using either epitope-tagged soluble TRAIL (sTRAIL) or sTRAIL that was cross-linked with a monoclonal antibody. Interestingly, sTRAIL was sufficient for induction of apoptosis only in cell lines that were killed by agonistic TRAIL-R1- and TRAIL-R2-specific IgG preparations. Moreover, in these cell lines interleukin-6 secretion and NF-kappaB activation were induced by cross-linked or non-cross-linked anti-TRAIL, as well as by both receptor-specific IgGs. However, cross-linking of sTRAIL was required for induction of apoptosis in cell lines that only responded to the agonistic anti-TRAIL-R2-IgG. Interestingly, activation of c-Jun N-terminal kinase (JNK) was only observed in response to either cross-linked sTRAIL or anti-TRAIL-R2-IgG even in cell lines where both receptors were capable of signaling apoptosis and NF-kappaB activation. Taken together, our data suggest that TRAIL-R1 responds to either cross-linked or non-cross-linked sTRAIL which signals NF-kappaB activation and apoptosis, whereas TRAIL-R2 signals NF-kappaB activation, apoptosis, and JNK activation only in response to cross-linked TRAIL.     

Mechanical studies of single ribosome/mRNA complexes

Methodology was developed for specifically anchoring Escherichia coli 70S ribosomes onto a chemically modified, cysteine-reactive glass surface. Immobilized ribosomes maintain the capability of binding a polyuridylic acid (poly(U)) template, enabling investigation of mechanical properties of individual ribosome-poly(U) complexes using laser tweezers. Streptavidin-coated polystyrene microspheres bound specifically to the biotinylated 3' end of long (up to 10,000 bases) poly(U) strands. A novel optical method was built to control the position of the laser trap along the microscope optical axis at 2 nm resolution, facilitating measurement of the force-extension relationship for poly(U). Some immobilized ribosome-poly(U) complexes supported 100 pN of force applied at the 3' end of the mRNA. Binding of N-acetylated Phe-tRNA(Phe), an analog of the initiator fMet-tRNA(Met), enhanced the population of complexes that could withstand high forces. The persistence length of poly(U) RNA homopolymer, modeled as a worm-like chain, was found to be 0.79 +/- 0.05 nm and the backbone elasticity was 900 +/- 140 pN, similar to values for single-stranded DNA.     

Grafting of oligosaccharides onto synthetic polymer colloids

A new method to form colloidally stable oligosaccharide-grafted synthetic polymer particles has been developed. The oligosaccharides, of weight-average degree of polymerization approximately 38, were obtained by enzymatic debranching of amylopectin. Through the use of a cerium(IV)-based redox initiation process, oligosaccharide chains are grafted onto a synthetic polymer colloid comprising electrostatically stabilized poly(methyl methacrylate) or polystyrene latex particles swollen with methyl methacrylate monomer. Ce(IV) creates a radical species on these oligosaccharides, which then propagates, initially with aqueous-phase monomer, then with the methyl methacrylate monomer inside the particles. Ultracentrifugation, NMR, and total starch analyses together prove that the grafting process has occurred, with at least 7.7 wt % starch grafted and a grafting efficiency of 33%. The surfactant used in latex preparation was removed by dialysis, resulting in particles colloidally stabilized with only linear starch as a steric stabilizer. The debranched starch that comprises these oligosaccharides is found to be a remarkably effective colloidal stabilizer, albeit at low electrolyte concentration, stabilizing particles with very sparse surface coverage.     

Capillary electrophoresis of subcellular-sized particles

Utilization of capillary electrophoresis (CE) for characterization and analytical separation of submicron- and micron-sized organic and inorganic particles as well as biological vesicles is reviewed. CE has been applied to charged polystyrene size standards, inorganic and organic colloidal particles, lipoprotein particles, liposomes, microsomes and viruses. These particle separations generally occur in a size-dependent manner and provide values of electrophoretic mobility which are in good agreement with those obtained by other electrophoretic techniques.     

Radiopaque organic-inorganic hybrids based on poly(D,L-lactide)

Hybrid organic-inorganic nanocomposites were prepared starting from alpha,omega-triethoxysilane-terminated poly(d,l-lactic acid) (PDLLA) to be used as potential radiopaque biocompatible coatings for medical devices. The synthesis of the organic phase precursors of given chain length was achieved via anionic polymerization of d,l-lactide using a bifunctional initiator and subsequent triethoxysilane functionalization of the end groups. PDLLA-based ceramers (ceramic polymers) were then synthesized by the sol-gel process at room temperature (rt) in the presence of different amounts of tetraethoxysilane. The rt-synthesized hybrids were then cured (at 80 or 130 degrees C), and their thermal and viscoelastic properties were investigated. All obtained hybrids were optically transparent, due to the nanometric dimension of the silica particles, and yielded clearly contrasted radiographic images.     

Self-assembly of DNA-polymer complexes using template polymerization.

The self-assembly of supramolecular complexes of nucleic acids and polymers is of relevance to several biological processes including viral and chromatin formation as well as gene therapy vector design. We now show that template polymerization facilitates condensation of DNA into particles that are <150 nm in diameter. Inclusion of a poly(ethylene glycol)-containing monomer prevents aggregation of these particles. The DNA within the particles remains biologically active and can express foreign genes in cells. The formation or breakage of covalent bonds has until now not been employed to compact DNA into artificial particles.     

The mechanics of F-actin microenvironments depend on the chemistry of probing surfaces

To understand the microscopic mechanical properties of actin networks, we monitor the motion of embedded particles with controlled surface properties. The highly resolved Brownian motions of these particles reveal the viscoelastic character of the microenvironments around them. In both non-cross-linked and highly cross-linked actin networks, particles that bind F-actin report viscoelastic moduli comparable to those determined by macroscopic rheology experiments. By contrast, particles modified to prevent actin binding have weak microenvironments that are surprisingly insensitive to the introduction of filament cross-links. Even when adjacent in the same cross-linked gel, actin-binding and nonbinding particles report viscoelastic moduli that differ by two orders of magnitude at low frequencies (0.5-1.5 rad/s) but converge at high frequencies (> 10(4) rad/s). For all particle chemistries, electron and light microscopies show no F-actin recruitment or depletion, so F-actin microheterogeneities cannot explain the deep penetration (approximately 100 nm) of nonbinding particles. Instead, we hypothesize that a local depletion of cross-linking around nonbinding particles explains the phenomena. With implications for organelle mobility in cells, our results show that actin binding is required for microenvironments to reflect macroscopic properties, and conversely, releasing actin enhances particle mobility beyond the effects of mere biochemical untethering.     

Novel biodegradable polyphosphate cross-linker for making biocompatible hydrogel

To obtain a novel biodegradable cross-linker, polymerizable polyphosphate (PIOP) was synthesized by ring-opening polymerization of 2-i-propyl-2-oxo-1,3,2-dioxaphospholane with 2-(2-oxo-1,3,2-dioxaphosphoroyloxyethyl methacrylate) (OPEMA). The number averaged molecular weight of the PIOP was 1.2 x 10(4), and the number of OPEMA units in one PIOP molecule was 2.2. Nonenzymatic degradation of the PIOP was evaluated in various pH aqueous media. The degree of hydrolysis was dependent on the pH; that is, it increased with an increase in the pH of the medium. At pH 11.0, the PIOP completely degraded in only 6 days. The poly[2-methacryloyloxyethyl phosphorylcholine (MPC)] cross-linked with the PIOP was prepared by radical polymerization. This polymer could form hydrogel, and the free water fraction in the hydrogel was high. The enzymatic activity of trypsin in contact with the hydrogel was similar to that in buffer solution. There is no adverse effect caused by the hydrogel to reduce the function of the trypsin. The cytotoxicity of poly(MPC) and degraded PIOP was evaluated using v79 cells, and it was not observed in either case. In conclusion, PIOP is a hydrolyzable polymer, which can be used as a cross-linker, and novel hydrogels having biodegradability and biocompatibility were prepared from poly(MPC) cross-linked with the PIOP.     

Glycosylation and Cross-linking in Bone Type I Collagen

Fibrillar type I collagen is the major organic component in bone, providing a stable template for mineralization. During collagen biosynthesis, specific hydroxylysine residues become glycosylated in the form of galactosyl- and glucosylgalactosyl-hydroxylysine. Furthermore, key glycosylated hydroxylysine residues, α1/2-87, are involved in covalent intermolecular cross-linking. Although cross-linking is crucial for the stability and mineralization of collagen, the biological function of glycosylation in cross-linking is not well understood. In this study, we quantitatively characterized glycosylation of non-cross-linked and cross-linked peptides by biochemical and nanoscale liquid chromatography-high resolution tandem mass spectrometric analyses. The results showed that glycosylation of non-cross-linked hydroxylysine is different from that involved in cross-linking. Among the cross-linked species involving α1/2-87, divalent cross-links were glycosylated with both mono- and disaccharides, whereas the mature, trivalent cross-links were primarily monoglycosylated. Markedly diminished diglycosylation in trivalent cross-links at this locus was also confirmed in type II collagen. The data, together with our recent report (Sricholpech, M., Perdivara, I., Yokoyama, M., Nagaoka, H., Terajima, M., Tomer, K. B., and Yamauchi, M. (2012) Lysyl hydroxylase 3-mediated glucosylation in type I collagen: molecular loci and biological significance. J. Biol. Chem. 287, 22998–23009), indicate that the extent and pattern of glycosylation may regulate cross-link maturation in fibrillar collagen.