Heteronuclear three-dimensional NMR spectroscopy of the inflammatory protein C5a

The utility of three-dimensional heteronuclear NMR spectroscopy for the assignment of 1H and 15N resonances of the inflammatory protein C5a (MW 8500), uniformly labeled with 15N, is demonstrated at a protein concentration of 0.7 mM. It is shown that dramatic simplification of the 2D nuclear Overhauser effect spectrum (NOESY) is obtained by editing with respect to the frequency of the 15N heteronucleus in a third dimension. The improved resolution in the 3D experiment largely facilitates the assignment of protein NMR spectra and allows for the determination of distance constraints from otherwise overlapping NOE cross peaks for purposes of 3D structure determination. The results show that 15N heteronuclear 3D NMR can facilitate the structure determination of small proteins and promises to be a useful tool for the study of larger systems that cannot be studied by conventional 2D NMR techniques.     

Characterization of the substrate mimic bound to engineered prostacyclin synthase in solution using high-resolution NMR spectroscopy and mutagenesis: implication of the molecular mechanism in biosynthesis of prostacyclin

High-resolution NMR spectroscopy was used to determine the docking of a substrate (prostaglandin H2) mimic (U46619) to the engineered prostacyclin (PGI2) synthase (PGIS) in solution. The binding of U46619 to the PGIS protein was demonstrated by 1D NMR titration, and the significant perturbation of the chemical shifts of protons at C-11, H2C, and H20 of U46619 were observed upon U46619 binding to the engineered PGIS in a concentration-dependent manner. The detailed conformational change and 3D structure of the PGIS-bound U46619 were further demonstrated by 2D 1H NMR experiments using the transferred NOE technique. The distances between the protons H20 and H2, H18 and H2, and H18 and H4 are shorter following their binding to the PGIS in solution-down to within 5 A. These shorter distances resulted in a widely open conformation, where the triangle shape of the unbound U46619 changed to a more compact conformation with an oval shape. The bound conformation of U46619 fits the crystal structure of the PGIS substrate binding pocket considerably better than that of the unbound U46619. The residues important to the substrate binding in the active site pocket of PGIS were also predicted. For example, Trp282 could be one of the most important residues and is suspected to play a role in the determination of specific catalytic function, which has been established by the docking studies using the NMR structure of the PGIS-bound form of U46619 and the PGIS crystal structure. These studies have provided the structural information for the interaction of the PGIS with its substrate mimic. The noted conformational changes where the C-6 position is closer to the C-9 position of U46619 provided the first experimental data for understanding the molecular mechanism of the catalytic function of PGIS in the isomerization of PGH2 to prostacyclin.     

Micro-coil NMR to monitor optimization of the reconstitution conditions for the integral membrane protein OmpW in detergent micelles

Optimization of aqueous solutions of the integral membrane protein (IMP) OmpW for NMR structure determination has been monitored with micro-coil NMR, which enables the acquisition of NMR spectra using only micrograms of protein and detergent. The detergent 30-Fos (2-undecylphosphocholine) was found to yield the best 2D [¹⁵N, ¹H]-TROSY correlation NMR spectra of [²H, ¹⁵N]-labeled OmpW. For the OmpW structure determination we then optimized the 30-Fos concentration, the sample temperature and long-time stability, and the deuteration level of the protein. Some emerging guidelines for reconstitution of ??-barrel integral membrane proteins in structural biology are discussed.     

The solution structure of a [3Fe-4S] ferredoxin: oxidised ferredoxin II from Desulfovibrio gigas

The use of standard 2D NMR experiments in combination with 1D NOE experiments allowed the assignment of 51 of the 58 spin systems of oxidised [3Fe-4S] ferredoxin isolated from Desulfovibrio gigas. The NMR solution structure was determined using data from 1D NOE and 2D NOESY spectra, as distance constraints, and information from the X-ray structure for the spin systems not detected by NMR in torsion angle dynamics calculations to produce a family of 15 low target function structures. The quality of the NMR family, as judged by the backbone r.m.s.d. values, was good (0.80?Å), with the majority of φ/ψ angles falling within the allowed region of the Ramachandran plot. A comparison with the X-ray structure indicated that the overall global fold is very similar in solution and in the solid state. The determination of the solution structure of ferredoxin II (FdII) in the oxidised state (FdII_ox) opens the way for the determination of the solution structure of the redox intermediate state of FdII (FdII_int), for which no X-ray structure is available.     

NMR for structural proteomics of Thermotoga maritima: Screening and structure determination

This paper describes the NMR screening of 141 small (<15 kDa) recombinant Thermotoga maritima proteins for globular folding. The experimental data shows that approximately 25% of the screened proteins are folded under our screening conditions, which makes this procedure an important step for selecting those proteins that are suitable for structure determination. A comparison of screening based either on 1D 1H NMR with unlabeled proteins or on 2D [1H,15N]-COSY with uniformly 15N-labeled proteins is presented, and a comprehensive analysis of the 1D 1H NMR screening data is described. As an illustration of the utility of these methods to structural proteomics, the NMR structure determination of TM1492 (ribosomal protein L29) is presented. This 66-residue protein consists of a N-terminal 3(10)-helix and two long alpha-helices connected by a tight turn centered about glycine 35, where conserved leucine and isoleucine residues in the two alpha-helices form a small hydrophobic core.     

一种百合甾体皂苷纯度及糖链结构核磁共振法分析

采用多种NMR分析技术,首次对百合甾体皂苷(25R,26R)-26-甲氧基螺甾烷-5-烯-3β-α-L-鼠李糖-(1→2)-[β-D-葡萄糖-(1→6)]-β-D-葡萄糖苷的1H和13C NMR信号进行了全归属,特别是应用选择性的1D TOCSY和1D NOESY核磁共振分析技术,对该化合物1中的氢谱信号严重重叠的糖链进行了详细的分析,提出了一套对甾体皂苷糖链信号进行全归属的核磁共振法.在确认其结构的基础上,建立了核磁共振法(1H NMR)测定该化合物1的纯度,给出了完整的实验条件,线性回归系数为0.9998,重复性实验RSD为0.58％,稳定性实验RSD为0.24％,操作简单、快速准确,且不需要其它对照品,是中药化学对照品纯度研究的一个有益补充.     

Structure and Coordination Determination of Peptide-metal Complexes Using 1D and 2D 1H NMR

Copper (I) binding by metallochaperone transport proteins prevents copper oxidation and release of the toxic ions that may participate in harmful redox reactions. The Cu (I) complex of the peptide model of a Cu (I) binding metallochaperone protein, which includes the sequence MTCSGCSRPG (underlined is conserved), was determined in solution under inert conditions by NMR spectroscopy.NMR is a widely accepted technique for the determination of solution structures of proteins and peptides. Due to difficulty in crystallization to provide single crystals suitable for X-ray crystallography, the NMR technique is extremely valuable, especially as it provides information on the solution state rather than the solid state. Herein we describe all steps that are required for full three-dimensional structure determinations by NMR. The protocol includes sample preparation in an NMR tube, 1D and 2D data collection and processing, peak assignment and integration, molecular mechanics calculations, and structure analysis. Importantly, the analysis was first conducted without any preset metal-ligand bonds, to assure a reliable structure determination in an unbiased manner.     

NMR studies of amyloid beta-peptides: proton assignments, secondary structure, and mechanism of an alpha-helix----beta-sheet conversion for a homologous, 28-residue, N-terminal fragment.

Beta-peptide is a major component of amyloid deposits in Alzheimer's disease. We report here a proton nuclear magnetic resonance (NMR) spectroscopic investigation of a synthetic peptide that is homologous to residues 1-28 of beta-peptide [abbreviated as beta-(1-28)]. The beta-(1-28) peptide produces insoluble beta-pleated sheet structures in vitro, similar to the beta-pleated sheet structures of beta-peptide in amyloid deposits in vivo. For peptide solutions in the millimolar range, in aqueous solution at pH 1-4 the beta-(1-28) peptide adopts a monomeric random coil structure, and at pH 4-7 the peptide rapidly precipitates from solution as an oligomeric beta-sheet structure, analogous to amyloid deposition in vivo. The NMR work shown here demonstrates that the beta-(1-28) peptide can adopt a monomeric alpha-helical conformation in aqueous trifluoroethanol solution at pH 1-4. Assignment of the complete proton NMR spectrum and the determination of the secondary structure were arrived at from interpretation of two-dimensional (2D) NMR data, primarily (1) nuclear Overhauser enhancement (NOE), (2) vicinal coupling constants between the amide (NH) and alpha H protons, and (3) temperature coefficients of the NH chemical shifts. The results show that at pH 1.0 and 10 degrees C the beta-(1-28) peptide adopts an alpha-helical structure that spans the entire primary sequence. With increasing temperature and pH, the alpha-helix unfolds to produce two alpha-helical segments from Ala2 to Asp7 and Tyr10 to Asn27. Further increases in temperature to 35 degrees C cause the Ala2-Asp7 section to become random coil, while the His13-Phe20 section stays alpha-helical. A mechanism involving unfavorable interactions between charged groups and the alpha-helix macrodipole is proposed for the alpha-helix----beta-sheet conversion observed at midrange pH.     

A novel type of carbohydrate-protein linkage region in the tyrosine-bound S-layer glycan of Thermoanaerobacterium thermosaccharolyticum D120-70.

The surface-layer (S-layer) protein of Thermoanaerobacterium thermosaccharolyticum D120-70 contains glycosidically linked glycan chains with the repeating unit structure -->4)[alpha-D-Galp-(1-->2)]-alpha-L-Rhap-(1-->3)[beta-D-Glcp-(1--> 6)] -beta-D-Manp-(1-->4)-alpha-L-Rhap-(1-->3)-alpha-D-Glcp-(1--> . After proteolytic degradation of the S-layer glycoprotein, three glycopeptide pools were isolated, which were analyzed for their carbohydrate and amino-acid compositions. In all three pools, tyrosine was identified as the amino-acid constituent, and the carbohydrate compositions corresponded to the above structure. Native polysaccharide PAGE showed the specific heterogeneity of each pool. For examination of the carbohydrate-protein linkage region, the S-layer glycan chain was partially hydrolyzed with trifluoroacetic acid. 1D and 2D NMR spectroscopy, including a novel diffusion-edited difference experiment, showed the O-glycosidic linkage region beta-D-glucopyranose-->O-tyrosine. No evidence was found of additional sugars originating from a putative core region between the glycan repeating units and the S-layer polypeptide. For the determination of chain-length variability in the S-layer glycan, the different glycopeptide pools were investigated by matrix-assisted laser desorption ionization-time of flight mass spectrometry, revealing that the degree of polymerization of the S-layer glycan repeats varied between three and 10. All masses were assigned to multiples of the repeating units plus the peptide portion. This result implies that no core structure is present and thus supports the data from the NMR spectroscopy analyses. This is the first observation of a bacterial S-layer glycan without a core region connecting the carbohydrate moiety with the polypeptide portion.     

Determination of the three-dimensional structure of oligosaccharides in the solid state from experimental 13C NMR data and ab initio chemical shift surfaces

A novel method for the determination of the three-dimensional (3D) structure of oligosaccharides in the solid state using experimental 13C NMR data is presented. The approach employs this information, combined with 13C chemical shift surfaces (CSSs) for the glycosidic bond carbons in the generation of NMR pseudopotential energy functions suitable for use as constraints in molecular modeling simulations. Application of the method to trehalose, cellobiose, and cellotetraose produces 3D models that agree remarkably well with the reported X-ray structures, with phi and psi dihedral angles that are within 10 degrees from the ones observed in the crystals. The usefulness of the approach is further demonstrated in the determination of the 3D structure of the cellohexaose, an hexasaccharide for which no X-ray data has been reported, as well as in the generation of accurate structural models for cellulose II and amylose V6.     

Innovations in generation and analysis of 2D [(13)C,(1)H] COSY NMR spectra for metabolic flux analysis purposes.

2D [(13)C,(1)H] COSY NMR is used by the metabolic engineering community for determining (13)C-(13)C connectivities in intracellular compounds that contain information regarding the steady-state fluxes in cellular metabolism. This paper proposes innovations in the generation and analysis of these specific NMR spectra. These include a computer tool that allows accurate determination of the relative peak areas and their complete covariance matrices even in very complex spectra. Additionally, a method is introduced for correcting the results for isotopic non-steady-state conditions. The proposed methods were applied to measured 2D [(13)C,(1)H] COSY NMR spectra. Peak intensities in a one-dimensional section of the spectrum are frequently not representative for relative peak volumes in the two-dimensional spectrum. It is shown that for some spectra a significant amount of additional information can be gained from long-range (13)C-(13)C scalar couplings in 2D [(13)C,(1)H] COSY NMR spectra. Finally, the NMR resolution enhancement by dissolving amino acid derivatives in a nonpolar solvent is demonstrated.     

Automated combined assignment of NOESY spectra and three-dimensional protein structure determination

A procedure for automated protein structure determination is presented that is based on an iterative procedure during which the NOESY peak list assignment and the structure calculation are performed simultaneously. The input consists of a list of NOESY peak positions and a list of chemical shifts as obtained from sequence-specific resonance assignment. For the present applications of this approach the previously introduced NOAH routine was implemented in the distance geometry program DIANA. As an illustration, experimental 2D and 3D NOESY cross-peak lists of six proteins have been analyzed, for which complete sequence-specific ¹H assignments are available for the polypeptide backbone and the amino acid side chains. The automated method assigned 70–90% of all NOESY cross peaks, which is on average 10% less than with the interactive approach, and only between 0.8% and 2.4% of the automatically assigned peaks had a different assignment than in the corresponding manually assigned peak lists. The structures obtained with NOAH/DIANA are in close agreement with those from manually assigned peak lists, and with both approaches the residual constraint violations correspond to high-quality NMR structure determinations. Systematic comparisons of the bundles of conformers that represent corresponding automatically and interactively determined structures document the absence of significant bias in either approach, indicating that an important step has been made towards automation of structure determination from NMR spectra.     

Protein NMR structure determination with automated NOE-identification in the NOESY spectra using the new software ATNOS

Novel algorithms are presented for automated NOESY peak picking and NOE signal identification in homonuclear 2D and heteronuclear-resolved 3D [¹H,¹H]-NOESY spectra during de novoprotein structure determination by NMR, which have been implemented in the new software ATNOS (automated NOESY peak picking). The input for ATNOS consists of the amino acid sequence of the protein, chemical shift lists from the sequence-specific resonance assignment, and one or several 2D or 3D NOESY spectra. In the present implementation, ATNOS performs multiple cycles of NOE peak identification in concert with automated NOE assignment with the software CANDID and protein structure calculation with the program DYANA. In the second and subsequent cycles, the intermediate protein structures are used as an additional guide for the interpretation of the NOESY spectra. By incorporating the analysis of the raw NMR data into the process of automated de novoprotein NMR structure determination, ATNOS enables direct feedback between the protein structure, the NOE assignments and the experimental NOESY spectra. The main elements of the algorithms for NOESY spectral analysis are techniques for local baseline correction and evaluation of local noise level amplitudes, automated determination of spectrum-specific threshold parameters, the use of symmetry relations, and the inclusion of the chemical shift information and the intermediate protein structures in the process of distinguishing between NOE peaks and artifacts. The ATNOS procedure has been validated with experimental NMR data sets of three proteins, for which high-quality NMR structures had previously been obtained by interactive interpretation of the NOESY spectra. The ATNOS-based structures coincide closely with those obtained with interactive peak picking. Overall, we present the algorithms used in this paper as a further important step towards objective and efficient de novoprotein structure determination by NMR.     

Efficient analysis of protein 2D NMR spectra using the software packageEASY

Summary The programEASY supports the spectral analysis of biomacromolecular two-dimensional (2D) nuclear magnetic resonance (NMR) data. It provides a user-friendly, window-based environment in which to view spectra for interactive interpretation. In addition, it includes a number of automated routines for peakpicking, spin-system identification, sequential resonance assignment in polypeptide chains, and cross peak integration. In this uniform environment, all resulting parameter lists can be recorded on disk, so that the paper plots and handwritten notes which normally accompany manual assignment of spectra can be largely eliminated. For example, in a protein structure determination by 2D¹H NMR,EASY accepts the frequency domain datasets as input, and after combined use of the automated and interactive routines it can yield a listing of conformational constraints in the format required as input for the calculation of the 3D structure. The program was extensively tested with current protein structure determinations in our laboratory. In this paper, its main features are illustrated with data on the protein basic pancreatic trypsin inhibitor.     

Solution structure of a common substrate mimetic of cyclooxygenase-downstream synthases bound to an engineered thromboxane A2 synthase using a high-resolution NMR technique

Understanding the docking mechanism of the common substrate, prostaglandin H(2) (PGH(2)), into the active sites of different cyclooxygenase(COX)-downstream synthases is a key step toward uncovering the molecular basis of the isomerization of PGH(2) to different prostanoids. A high-resolution NMR spectroscopy was used to determine the conformational changes and solution 3D structure of U44069, a PGH(2) analogue, bound to one of the COX-downstream synthases-an engineered thromboxane A(2) synthase (TXAS). The dynamic binding was clearly observed by (1)D NMR titration. The detailed conformational change and 3D structure of U44069 bound to the TXAS were demonstrated by 2D (1)H NMR experiments using transferred NOEs. Through the assignments for the 2D (1)H NMR spectra, TOCSY, DQF-COSY, NOESY, and the structural calculations based on the NOE constraints, they demonstrated that the widely open conformation with a triangle shape of the free U44069 changed to a compact structure with an oval shape when bound to the TXAS. The putative substrate-binding pocket of the TXAS model fits the conformation of the TXAS-bound U44069 appropriately, but could not fit the free form of U44069. It was the first to provide structural information for the dynamic docking of the PGH(2) mimic of the TXAS in solution, and to imply that PGH(2) undergoes conformational changes when bound to different COX-downstream synthases, which may play important roles in the isomerization of PGH(2) to different prostanoids. The NMR technique can be used as a powerful tool to determine the conformations of PGH(2) bound to other COX-downstream synthases.     

Improved simulation of NOESY spectra by RELAX-JT2 including effects of J-coupling, transverse relaxation and chemical shift anisotropy

RELAX-JT2 is an extension of RELAX, a program for the simulation of 1H 2D NOESY spectra and (15)N or (13)C edited 3D NOESY-HSQC spectra of biological macromolecules. In addition to the already existing NOE-simulation it allows the proper simulation of line shapes by the integrated calculation of T(2) times and multiplet structures caused by J-couplings. Additionally the effects of relaxation mediated by chemical shift anisotropy are taken into account. The new routines have been implemented in the program AUREMOL, which aims at the automated NMR structure determination of proteins in solution. For a manual or automatic assignment of experimental spectra that is based on the comparison with the corresponding simulated spectra, the additional line shape information now available is a valuable aid. The new features have been successfully tested with the histidine-containing phosphocarrier protein HPr from Staphylococcus carnosus.     

High-resolution mono- and multidimensional magic angle spinning 1H nuclear magnetic resonance of membrane peptides in nondeuterated lipid membranes and H2O.

High-speed (14 kHz) solid-state magic angle spinning (MAS) 1H NMR has been applied to several membrane peptides incorporated into nondeuterated dilauroyl or dimyristoylphosphatidylcholine membranes suspended in H2O. It is shown that solvent suppression methods derived from solution NMR, such as presaturation or jump-return, can be used to reduce water resonance, even at relatively high water content. In addition, regioselective excitation of 1H peptide resonances promotes an efficient suppression of lipid resonances, even in cases where these are initially two orders of magnitude more intense. As a consequence, 1H MAS spectra of the peptide low-field region are obtained without interference from water and lipid signals. These display resonances from amide and other exchangeable 1H as well as from aromatic nonexchangeable 1H. The spectral resolution depends on the specific types of resonance and membrane peptide. For small amphiphilic or hydrophobic oligopeptides, resolution of most individual amide resonance is achieved, whereas for the transmembrane peptide gramicidin A, an unresolved amide spectrum is obtained. Partial resolution of aromatic 1H occurs in all cases. Multidimensional 1H-MAS spectra of membrane peptides can also be obtained by using water suppression and regioselective excitation. For gramicidin A, F2-regioselective 2D nuclear Overhauser effect spectroscopy (NOESY) spectra are dominated by intermolecular through-space connectivities between peptide aromatic or formyl 1H and lipid 1H. These appear to be compatible with the known structure and topography of the gramicidin pore. On the other hand, for the amphiphilic peptide leucine-enkephalin, F2-regioselective NOESY spectra mostly display cross-peaks originating from though-space proximities of amide or aromatic 1H with themselves and with aliphatic 1H. F3-regioselective 3D NOESY-NOESY spectra can be used to obtain through-space correlations within aliphatic 1H. Such intrapeptide proximities should allow determination of the conformation of the peptide in membranes. It is suggested that high-speed MAS multidimensional 1H NMR of peptides in nondeuterated membranes and in H2O can be used for studies of both peptide structure and lipid-peptide interactions.     

Increased precision for analysis of protein–ligand dissociation constants determined from chemical shift titrations

NMR is ideally suited for the analysis of protein-protein and protein ligand interactions with dissociation constants ranging from ~2 μM to ~1 mM, and with kinetics in the fast exchange regime on the NMR timescale. For the determination of dissociation constants (K ( D )) of 1:1 protein-protein or protein-ligand interactions using NMR, the protein and ligand concentrations must necessarily be similar in magnitude to the K ( D ), and nonlinear least squares analysis of chemical shift changes as a function of ligand concentration is employed to determine estimates for the parameters K ( D ) and the maximum chemical shift change (Δδ(max)). During a typical NMR titration, the initial protein concentration, [P (0)], is held nearly constant. For this condition, to determine the most accurate parameters for K ( D ) and Δδ(max) from nonlinear least squares analyses requires initial protein concentrations that are ~0.5 × K ( D ), and a maximum concentration for the ligand, or titrant, of ~10 × [P (0)]. From a practical standpoint, these requirements are often difficult to achieve. Using Monte Carlo simulations, we demonstrate that co-variation of the ligand and protein concentrations during a titration leads to an increase in the precision of the fitted K ( D ) and Δδ(max) values when [P (0)] > K ( D ). Importantly, judicious choice of protein and ligand concentrations for a given NMR titration, combined with nonlinear least squares analyses using two independent variables (ligand and protein concentrations) and two parameters (K ( D ) and Δδ(max)) is a straightforward approach to increasing the accuracy of measured dissociation constants for 1:1 protein-ligand interactions.     

Towards miniaturization of a structural genomics pipeline using micro-expression and microcoil NMR

In structural genomics centers, nuclear magnetic resonance (NMR) screening is in increasing use as a tool to identify folded proteins that are promising targets for three-dimensional structure determination by X-ray crystallography or NMR spectroscopy. The use of 1D ¹H NMR spectra or 2D [¹H,¹⁵N]-correlation spectroscopy (COSY) typically requires milligram quantities of unlabeled or isotope-labeled protein, respectively. Here, we outline ways towards miniaturization of a structural genomics pipeline with NMR screening for folded globular proteins, using a high-density micro-fermentation device and a microcoil NMR probe. The proteins are micro-expressed in unlabeled or isotope-labeled media, purified, and then subjected to 1D ¹H NMR and/or 2D [¹H,¹⁵N]-COSY screening. To demonstrate that the miniaturization is functioning effectively, we processed nine mouse homologue protein targets and compared the results with those from the “macro-scale” Joint Center of Structural Genomics (JCSG) high-throughput pipeline. The results from the two pipelines were comparable, illustrating that the data were not compromised in the miniaturized approach.     

Prions

The prion hypothesis^1-3 states that the prion and non-prion form of a protein differ only in their 3D conformation and that different strains of a prion differ by their 3D structure.^{4, 5} Recent technical developments have enabled solid-state NMR to address the atomic-resolution structures of full-length prions, and a first comparative study of two of them, HET-s and Ure2p, in fibrillar form, has recently appeared as a pair of companion papers.^{6, 7} Interestingly, the two structures are rather different: HET-s features an exceedingly well-ordered prion domain and a partially disordered globular domain. Ure2p in contrast features a very well ordered globular domain with a conserved fold, and – most probably - a partially ordered prion domain.⁶ For HET-s, the structure of the prion domain is characterized at atomic-resolution. For Ure2p, structure determination is under way, but the highly resolved spectra clearly show that information at atomic resolution should be achievable.