“Water‐in‐Salt” Electrolyte Makes Aqueous Sodium‐Ion Battery Safe,Green, and Long‐Lasting

Narrow electrochemical stability window (1.23 V) of aqueous electrolytes is always considered the key obstacle preventing aqueous sodium‐ion chemistry of practical energy density and cycle life. The sodium‐ion water‐in‐salt electrolyte (NaWiSE) eliminates this barrier by offering a 2.5 V window through suppressing hydrogen evolution on anode with the formation of a Na⁺‐conducting solid‐electrolyte interphase (SEI) and reducing the overall electrochemical activity of water on cathode. A full aqueous Na‐ion battery constructed on Na_0.66[Mn_0.66Ti_0.34]O₂ as cathode and NaTi₂(PO₄)₃ as anode exhibits superior performance at both low and high rates, as exemplified by extraordinarily high Coulombic efficiency (>99.2%) at a low rate (0.2 C) for >350 cycles, and excellent cycling stability with negligible capacity losses (0.006% per cycle) at a high rate (1 C) for >1200 cycles. Molecular modeling reveals some key differences between Li‐ion and Na‐ion WiSE, and identifies a more pronounced ion aggregation with frequent contacts between the sodium cation and fluorine of anion in the latter as one main factor responsible for the formation of a dense SEI at lower salt concentration than its Li cousin.     

Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10^?4 S cm^?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm^?2 at 30 °C. The LiFePO₄/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature.     

Hierarchically Porous,Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries

In this work, a hierarchically porous and ultrathick “breathable” wood‐based cathode for high‐performance Li‐O₂ batteries is developed. The 3D carbon matrix obtained from the carbonized and activated wood (denoted as CA‐wood) serves as a superconductive current collector and an ideal porous host for accommodating catalysts. The ruthenium (Ru) nanoparticles are uniformly anchored on the porous wall of the aligned microchannels (denoted as CA‐wood/Ru). The aligned open microchannels inside the carbon matrix contribute to unimpeded oxygen gas diffusion. Moreover, the hierarchical pores on the microchannel walls can be facilely impregnated by electrolyte, forming a continuous supply of electrolyte. As a result, numerous ideal triphase active sites are formed where electrolyte, oxygen, and catalyst accumulate on the porous walls of microchannels. Benefiting from the numerous well‐balanced triple‐phase active sites, the assembled Li‐O₂ battery with the CA‐wood/Ru cathode (thickness: ≈700 µm) shows a high specific area capacity of 8.58 mA h cm^?2 at 0.1 mA cm^?2. Moreover, the areal capacity can be further increased to 56.0 mA h cm^?2 by using an ultrathick CA‐wood/Ru cathode with a thickness of ≈3.4 mm. The facile ultrathick wood‐based cathodes can be applied to other cathodes to achieve a super high areal capacity without sacrificing the electrochemical performance.     

Fetal cannabinoid receptors and the “dis‐joint‐ed” brain

Microtubule turnover in the growing axons is required for directional axonal growth and synapse formation in the developing brain. In this issue of The EMBO Journal, Tortoriello et al ( 2014 ) show that the microtubule‐binding protein SCG10/stathmin‐2 is a specific molecular target for a CB₁ receptor‐mediated effect of Δ⁹‐tetrahydrocannabinol (THC), the psychoactive ingredient of smoked marijuana, in the fetal brain. Considering the role of CB₁ in modulating the specification and long‐distance migration of neurons in the perinatal brain, this study reveals an interesting mechanism potentially accounting for connectivity deficits during cortical development following exposure to CB₁ agonists or THC during pregnancy.     

Near‐Infrared,Heavy Metal‐Free Colloidal “Giant” Core/Shell Quantum Dots

“Giant” core/shell quantum dots (g‐QDs) are a promising class of materials for future optoelectronic technologies due to their superior chemical‐ and photostability compared to bare QDs and core/thin shell QDs. However, inadequate light absorption in the visible and near‐infrared (NIR) region and frequent use of toxic heavy metals (e.g., Cd and Pb) are still major challenges for most g‐QDs (e.g., CdSe/CdS) synthesized to date. The synthesis of NIR, heavy metal‐free, Zn‐treated spherical CuInSe₂/CuInS₂ g‐QDs is reported using the sequential cation exchange method. These g‐QDs exhibit tunable NIR optical absorption and photoluminescence (PL) properties. Transient fluorescence spectroscopy shows prolonged lifetime with increasing shell thickness, indicating the formation of quasi type‐II band alignment, which is further confirmed by simulations. As a proof‐of‐concept, as‐synthesized g‐QDs are used to sensitize TiO₂ as a photoanode in a photoelectrochemical (PEC) cell, demonstrating an efficient and stable PEC system. These results pave the way toward synthesizing NIR heavy metal‐free g‐QDs, which are very promising components of future optoelectronic technologies.     

“Active” and “passive” ecological restoration strategies in meta‐analysis

One of the means of creating a more robust methodology for ecological restoration involves reducing the gap between ecological theory and restoration practices. A common strategy to do so is using meta‐analysis to understand key drivers of restoration outcomes. “Active” and “passive” is a dichotomy often used to separate restoration strategies in such meta‐analyses. We investigate previously raised concerns about selection bias and subjective categorization of strategies. We promote a paired experimental design in future empirical research and propose the use of three categories of restoration strategy in lieu of “passive” and “active” to alleviate inconsistency in definitions and categorization.     

Sex‐specific selection on plant architecture through “budget” and “direct” effects in experimental populations of the wind‐pollinated herb,Mercurialis annua

Sexual selection may contribute to the evolution of plant sexual dimorphism by favoring architectural traits in males that improve pollen dispersal to mates. In both sexes, larger individuals may be favored by allowing the allocation of more resources to gamete production (a “budget” effect of size). In wind‐pollinated plants, large size may also benefit males by allowing the liberation of pollen from a greater height, fostering its dispersal (a “direct” effect of size). To assess these effects and their implications for trait selection, we measured selection on plant morphology in both males and females of the wind‐pollinated dioecious herb Mercurialis annua in two separate experimental common gardens at contrasting density. In both gardens, selection strongly favored males that disperse their pollen further. Selection for pollen production was observed in the high‐density garden only, and was weak. In addition, male morphologies associated with increased mean pollen dispersal differed between the two gardens, as elongated branches were favored in the high‐density garden, whereas shorter plants with longer inflorescence stalks were favored in the low‐density garden. Larger females were selected in both gardens. Our results point to the importance of both a direct effect of selection on male traits that affect pollen dispersal, and, to a lesser extent, a budget effect of selection on pollen production.     

A critique of the “ultra‐high risk” and “transition” paradigm

The transdiagnostic expression of psychotic experiences in common mental disorder (anxiety/depression/substance use disorder) is associated with a poorer prognosis, and a small minority of people may indeed develop a clinical picture that meets criteria for schizophrenia. However, it appears neither useful nor valid to observe early states of multidimensional psychopathology in young people through the “schizo”‐prism, and apply misleadingly simple, unnecessary and inefficient binary concepts of “risk” and “transition”. A review of the “ultra‐high risk” (UHR) or “clinical high risk” (CHR) literature indicates that UHR/CHR samples are highly heterogeneous and represent individuals diagnosed with common mental disorder (anxiety/depression/substance use disorder) and a degree of psychotic experiences. Epidemiological research has shown that psychotic experiences are a (possibly non‐causal) marker of the severity of multidimensional psychopathology, driving poor outcome, yet notions of “risk” and “transition” in UHR/CHR research are restrictively defined on the basis of positive psychotic phenomena alone, ignoring how baseline differences in multidimensional psychopathology may differentially impact course and outcome. The concepts of “risk” and “transition” in UHR/CHR research are measured on the same dimensional scale, yet are used to produce artificial diagnostic shifts. In fact, “transition” in UHR/CHR research occurs mainly as a function of variable sample enrichment strategies rather than the UHR/CHR “criteria” themselves. Furthermore, transition rates in UHR/CHR research are inflated as they do not exclude false positives associated with the natural fluctuation of dimensional expression of psychosis. Biological associations with “transition” thus likely represent false positive findings, as was the initial claim of strong effects of omega‐3 polyunsatured fatty acids in UHR samples. A large body of UHR/CHR intervention research has focused on the questionable outcome of “transition”, which shows lack of correlation with functional outcome. It may be more productive to consider the full range of person‐specific psychopathology in all young individuals who seek help for mental health problems, instead of “policing” youngsters for the transdiagnostic dimension of psychosis. Instead of the relatively inefficient medical high‐risk approach, a public health perspective, focusing on improved access to a low‐stigma, high‐hope, small scale and youth‐specific environment with acceptable language and interventions may represent a more useful and efficient strategy.     

Polymer‐in‐“Quasi‐Ionic Liquid” Electrolytes for High‐Voltage Lithium Metal Batteries

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐“quasi‐ionic liquid” electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of “quasi‐ionic liquids” is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs.     

Restoring Intertidal Boulder‐Fields as Habitat for “Specialist” and “Generalist” Animals

Restoration is important in urban areas where habitat destruction is greatest. It incorporates many levels of intervention, with creation of new habitat the most extreme form. Most research on habitat creation has been terrestrial, or in marine habitats dominated by large structuring biota, such as mangroves. Intertidal boulder‐fields in urban areas are vulnerable to disturbances and habitat loss, which adversely affect numerous habitat specialists. This study describes experiments in which quarried stones were used to create new habitat outside natural boulder‐fields as a practical approach to restoring habitat. Colonization by specialist fauna and by common algae and invertebrates was measured for a year after deployment. Despite sessile assemblages on new boulders differing from those on natural boulders, common and rare animals rapidly colonized the new habitat. There was no clear succession, but colonization was variable and patchy at all scales examined, although diversities and abundances of some species in this novel habitat matched those of natural boulders within a few months. Rare and common animals generally colonized the new habitat as adults moving in from surrounding areas. Creating new boulder‐fields using quarried rocks is a successful approach to restoration and conservation of fauna where natural boulder‐fields are threatened.     

Breeding habitat and nest‐site selection by an obligatory “nest‐cleptoparasite”, the Amur Falcon Falco amurensis

The selection of a nest site is crucial for successful reproduction of birds. Animals which re‐use or occupy nest sites constructed by other species often have limited choice. Little is known about the criteria of nest‐stealing species to choose suitable nesting sites and habitats. Here, we analyze breeding‐site selection of an obligatory “nest‐cleptoparasite”, the Amur Falcon Falco amurensis. We collected data on nest sites at Muraviovka Park in the Russian Far East, where the species breeds exclusively in nests of the Eurasian Magpie Pica pica. We sampled 117 Eurasian Magpie nests, 38 of which were occupied by Amur Falcons. Nest‐specific variables were assessed, and a recently developed habitat classification map was used to derive landscape metrics. We found that Amur Falcons chose a wide range of nesting sites, but significantly preferred nests with a domed roof. Breeding pairs of Eurasian Hobby Falco subbuteo and Eurasian Magpie were often found to breed near the nest in about the same distance as neighboring Amur Falcon pairs. Additionally, the occurrence of the species was positively associated with bare soil cover, forest cover, and shrub patches within their home range and negatively with the distance to wetlands. Areas of wetlands and fallow land might be used for foraging since Amur Falcons mostly depend on an insect diet. Additionally, we found that rarely burned habitats were preferred. Overall, the effect of landscape variables on the choice of actual nest sites appeared to be rather small. We used different classification methods to predict the probability of occurrence, of which the Random forest method showed the highest accuracy. The areas determined as suitable habitat showed a high concordance with the actual nest locations. We conclude that Amur Falcons prefer to occupy newly built (domed) nests to ensure high nest quality, as well as nests surrounded by available feeding habitats.     

Sorting out “non‐canonical” autophagy

Canonically, LC3 lipidation has been associated with autophagy pathways but it becomes increasingly clear that this modification can also occur during autophagy‐unrelated processes. In this issue, Florey and colleagues find that the WD40 domain of ATG16L1 is dispensable for LC3 lipidation during starvation‐induced autophagy but required for its lipidation during several other membrane‐based processes that are different from autophagy. This finding opens the door for the analysis of the functions of LC3 lipidation in these pathways.